| History log of /src/etc/etc.hpcsh |
| Revision | Date | Author | Comments |
| 1.34 | 24-Oct-2003 |
jdolecek | switch over to unified MAKEDEV
|
| 1.33 | 10-Oct-2003 |
jdolecek | reassing majors for crypto and pf to use the newly defined MI major range
|
| 1.32 | 03-Oct-2003 |
dsl | Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
|
| 1.31 | 05-Sep-2003 |
dsl | Put back port specific majors for ptys
|
| 1.30 | 30-Aug-2003 |
dsl | Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
|
| 1.29 | 22-Aug-2003 |
itojun | create /dev/crypto
|
| 1.28 | 27-Jul-2003 |
itojun | reserve cdev major # for PF. ok'ed by technical-exec
|
| 1.27 | 27-Apr-2003 |
ragge | Add ksyms to "std" devices.
|
| 1.26 | 17-Apr-2003 |
fvdl | Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
|
| 1.25 | 31-Mar-2003 |
perry | make ipl consistently "IP Filter"
|
| 1.24 | 30-Mar-2003 |
wiz | Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.
|
| 1.23 | 21-Oct-2002 |
lukem | whitespace consistency cleanup
|
| 1.22 | 04-Oct-2002 |
elric | Include cgd on the list of things to be mknod(8)ed on all arches.
|
| 1.21 | 09-Aug-2002 |
lukem | - in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.20 | 18-Jul-2002 |
tsutsui | Fix cd and md entries since RAW_PART is 2 on sh3 ports.
|
| 1.19 | 18-Jun-2002 |
wiz | Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
|
| 1.18 | 17-Jun-2002 |
christos | Add device creation support for systrace.
|
| 1.17 | 25-May-2002 |
uch | type miss of i partition: 9->8
|
| 1.16 | 22-May-2002 |
uch | increase partition to 16.
|
| 1.15 | 13-Mar-2002 |
simonb | branches: 1.15.2;
Remove trailing semicolons from lines that don't need them.
TABify many lines.
|
| 1.14 | 04-Mar-2002 |
lukem | various cleanups inspired by etc.i386/MAKEDEV:
* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"
* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent
* when making directories, don't use -p and don't redirect stdout to /dev/null
* clean up whitespace
* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)
* don't barf when we have fdesc mounted; just skip the devices fdesc provides
(these files should really be automagically generated...)
|
| 1.13 | 03-Mar-2002 |
toshii | Use a tab instead of 7 spaces.
|
| 1.12 | 25-Feb-2002 |
atatat | Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.
|
| 1.11 | 02-Feb-2002 |
tls | Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
|
| 1.10 | 02-Feb-2002 |
tls | Add support for many more (930 or 992) ptys than the current 256.
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
|
| 1.9 | 21-Jan-2002 |
abs | Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.
|
| 1.8 | 13-Jan-2002 |
manu | Added clockctl
|
| 1.7 | 19-Dec-2001 |
wiz | Standardize ch* and uk* descriptions.
|
| 1.6 | 19-Dec-2001 |
wiz | Standardize scsibus* description.
|
| 1.5 | 29-Oct-2001 |
augustss | Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.
|
| 1.4 | 13-Oct-2001 |
augustss | Allow creation of wsmuxctl devices.
|
| 1.3 | 10-May-2001 |
lukem | don't prevent pty6 from creating ttyv*, since there's no custom console on ttyv
|
| 1.2 | 21-Jan-2001 |
uch | hpcsh original device file
|
| 1.1 | 17-Jan-2001 |
itojun | for MACHINE=hpcsh. straight copy of evbsh3.
|
| 1.15.2.1 | 10-Aug-2002 |
lukem | Pull up revision 1.21 (requested by lukem):
- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.4 | 16-Aug-2012 |
abs | Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
|
| 1.3 | 03-Jul-2004 |
uch | branches: 1.3.50;
add apm
|
| 1.2 | 19-Oct-2003 |
jdolecek | determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
|
| 1.1 | 15-Oct-2003 |
jdolecek | MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
|
| 1.3.50.1 | 30-Oct-2012 |
yamt | sync with head
|
| 1.5 | 19-Sep-2008 |
tsutsui | Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
XXX: maybe ramdisk kernels should be installed into binary/kernel dir
XXX: as other ports rather than installation dir, and
XXX: kernel config names should be preserved in their filenames.
|
| 1.4 | 24-Jul-2007 |
pavel | branches: 1.4.12; 1.4.18;
Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.3 | 06-Dec-2002 |
jdolecek | branches: 1.3.16; 1.3.20;
Make the release bits more complete for hpcsh & dreamcast.
Change sent by FUKAUMI Naoki in private e-mail, thanks.
|
| 1.2 | 05-Dec-2002 |
jdolecek | distrib/hpcsh appears to need the RAMDISK kernel for miniroot
|
| 1.1 | 26-Jun-2002 |
itojun | branches: 1.1.2;
build GENERIC kernel
|
| 1.1.2.2 | 26-Jun-2002 |
lukem | Pull up revision 1.1 (requested by itojun in ticket #367):
build GENERIC kernel
|
| 1.1.2.1 | 26-Jun-2002 |
lukem | file Makefile.inc was added on branch netbsd-1-6 on 2002-06-26 00:23:15 +0000
|
| 1.3.20.1 | 22-Sep-2008 |
bouyer | Pull up following revision(s) (requested by tsutsui in ticket #1204):
distrib/hpcarm/Makefile 1.4 - 1.6
distrib/hpcarm/instkernel/Makefile 1.1
distrib/hpcarm/stand/Makefile 1.1 - 1.2
distrib/hpcmips/Makefile 1.29 - 1.33
distrib/hpcmips/instkernel/Makefile 1.1
distrib/hpcmips/stand/Makefile 1.1 - 1.2
distrib/hpcsh/Makefile 1.7 - 1.9
distrib/hpcsh/instkernel/Makefile 1.1
distrib/hpcsh/stand/Makefile 1.1 - 1.2
distrib/miniroot/Makefile 1.65 - 1.66
etc/etc.hpcarm/Makefile.inc 1.6 - 1.8
etc/etc.hpcmips/Makefile.inc 1.9 - 1.10
etc/etc.hpcsh/Makefile.inc 1.4 - 1.5
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}
Add ${IMAGE}.gz to dependency list of release:: target as well as the one
in src/distrib/common/Makefile.image so that ${MAKESUMS} will be invoked
after the target image is installed into the releasedir, not before,
even if make -jN is specified.
XXX some ports do ${MAKESUMS} for installation/miniroot files
XXX in etc/etc.${MACHINE}/Makefile.inc later again.
- add INSTALLATION_DIRS+=installation/miniroot so that miniroot.fs.gz
image is installed properly
- INSTALL_IPAQ should be in BUILD_KERNELS rather than KERNEL_SETS
since it requires ramdisk image by mdsetimage(8) in src/distrib
Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
|
| 1.3.16.1 | 22-Sep-2008 |
bouyer | Pull up following revision(s) (requested by tsutsui in ticket #1204):
distrib/hpcarm/Makefile 1.4 - 1.6
distrib/hpcarm/instkernel/Makefile 1.1
distrib/hpcarm/stand/Makefile 1.1 - 1.2
distrib/hpcmips/Makefile 1.29 - 1.33
distrib/hpcmips/instkernel/Makefile 1.1
distrib/hpcmips/stand/Makefile 1.1 - 1.2
distrib/hpcsh/Makefile 1.7 - 1.9
distrib/hpcsh/instkernel/Makefile 1.1
distrib/hpcsh/stand/Makefile 1.1 - 1.2
distrib/miniroot/Makefile 1.65 - 1.66
etc/etc.hpcarm/Makefile.inc 1.6 - 1.8
etc/etc.hpcmips/Makefile.inc 1.9 - 1.10
etc/etc.hpcsh/Makefile.inc 1.4 - 1.5
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}
Add ${IMAGE}.gz to dependency list of release:: target as well as the one
in src/distrib/common/Makefile.image so that ${MAKESUMS} will be invoked
after the target image is installed into the releasedir, not before,
even if make -jN is specified.
XXX some ports do ${MAKESUMS} for installation/miniroot files
XXX in etc/etc.${MACHINE}/Makefile.inc later again.
- add INSTALLATION_DIRS+=installation/miniroot so that miniroot.fs.gz
image is installed properly
- INSTALL_IPAQ should be in BUILD_KERNELS rather than KERNEL_SETS
since it requires ramdisk image by mdsetimage(8) in src/distrib
Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
|
| 1.4.18.2 | 24-Jul-2007 |
pavel | Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.4.18.1 | 24-Jul-2007 |
pavel | file Makefile.inc was added on branch matt-mips64 on 2007-07-24 10:49:26 +0000
|
| 1.4.12.1 | 05-Oct-2008 |
mjf | Sync with HEAD.
|
| 1.5 | 19-Dec-2002 |
jdolecek | use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries
the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
|
| 1.4 | 09-Apr-2002 |
tron | Back out last change because we now have a special disktab for the
FFS regression test.
|
| 1.3 | 09-Apr-2002 |
tron | Add missing "floppy288" entry required for FFS regression test.
|
| 1.2 | 28-Feb-2001 |
uch | delete floppy disk define.
|
| 1.1 | 17-Jan-2001 |
itojun | for MACHINE=hpcsh. straight copy of evbsh3.
|
| 1.3 | 04-May-2002 |
jdolecek | Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.
|
| 1.2 | 28-Feb-2001 |
uch | add RCS tag.
|
| 1.1 | 17-Jan-2001 |
itojun | for MACHINE=hpcsh. straight copy of evbsh3.
|
| 1.2 | 04-May-2002 |
jdolecek | Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.
|
| 1.1 | 28-Feb-2001 |
uch | sample fstab for Flash ATA card based system.
|
| 1.11 | 13-Jun-2012 |
martin | Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
|
| 1.10 | 07-Oct-2008 |
abs | branches: 1.10.18; 1.10.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
|
| 1.9 | 06-Apr-2006 |
uwe | branches: 1.9.20;
Spell "baud" correctly.
|
| 1.8 | 11-Jul-2004 |
uch | run getty on /dev/ttyE0 by default.
otherwise, user can't start X server.
|
| 1.7 | 20-Jun-2004 |
christos | remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
|
| 1.6 | 04-Oct-2003 |
dsl | Revert 'console' back to /dev/console (from /dev/constty)
|
| 1.5 | 03-Oct-2003 |
dsl | Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
|
| 1.4 | 13-Feb-2002 |
martti | Added ttyp[g-zA-Z] (bin/15594).
|
| 1.3 | 28-Feb-2001 |
uch | change console speed to 19200.
|
| 1.2 | 21-Jan-2001 |
uch | change console getty setting.
|
| 1.1 | 17-Jan-2001 |
itojun | for MACHINE=hpcsh. straight copy of evbsh3.
|
| 1.9.20.1 | 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.10.20.1 | 24-Jun-2012 |
riz | Pull up following revision(s) (requested by martin in ticket #342):
etc/etc.shark/ttys: revision 1.8
etc/etc.hpcsh/ttys: revision 1.11
etc/etc.amiga/ttys: revision 1.24
etc/etc.arc/ttys: revision 1.8
etc/etc.alpha/ttys: revision 1.12
etc/etc.amigappc/ttys: revision 1.3
etc/etc.ofppc/ttys: revision 1.9
etc/etc.hp300/ttys: revision 1.16
etc/etc.rs6000/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.20
etc/etc.acorn26/ttys: revision 1.4
etc/etc.iyonix/ttys: revision 1.4
etc/etc.netwinder/ttys: revision 1.8
etc/etc.mac68k/ttys: revision 1.20
etc/etc.evbarm/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.15
etc/etc.hpcmips/ttys: revision 1.10
share/terminfo/terminfo: revision 1.5
etc/etc.mvmeppc/ttys: revision 1.6
etc/etc.next68k/ttys: revision 1.10
etc/etc.acorn32/ttys: revision 1.9
etc/etc.ibmnws/ttys: revision 1.4
etc/etc.atari/ttys: revision 1.10
etc/etc.sgimips/ttys: revision 1.10
etc/etc.newsmips/ttys: revision 1.9
etc/etc.hpcarm/ttys: revision 1.6
etc/etc.cats/ttys: revision 1.7
etc/etc.amd64/ttys: revision 1.6
etc/etc.prep/ttys: revision 1.8
etc/etc.zaurus/ttys: revision 1.3
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
Add a delete key capability to our wsvt25 entry. Fixes a problem noted by
David Lord on netbsd-users.
|
| 1.10.18.1 | 30-Oct-2012 |
yamt | sync with head
|
