switch over to unified MAKEDEV

reassing majors for crypto and pf to use the newly defined MI major range

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

add isdn telephony dialout devices

Put back port specific majors for ptys

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

Uppercase ITE. Addresses PRs 21138 to 21141 by Igor Sobrado.

make ipl consistently "IP Filter"

Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.

Synchronize macppc and evbppc majors when possible. Add a lot of missing
devices to evbppc.

Add bktr* and radio*

Add comments for ld and mlx (hi allen!).

Understand how to create device nodes for mlx and ld.
As part of 'all', create mlx0 and ld0-3.
Pointed out by Daniel Eggert in PR 18487.

whitespace consistency cleanup

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Add kttcp

By default, make ugen0 in the usbs target too, as i386 and x86_64 already did.

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

userland access to apm emulation.

Add device creation support for systrace.

branches: 1.60.2;
Make only necessary wscons devices for floppy.

Rename ISDN devices, per discussion on tech-kern. The network devices
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Add sysmon devices.

Use a tab instead of 7 spaces.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

Create the ulpt devices that don't reset the printer on open.
(I don't get this, I could have sworn I committed these files a while ago.)

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.

Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.

Changed clockctl group to ntpd

fix a couple of spelling mistakes in the i4b* descriptions

Standardize ch* and uk* descriptions.

Standardize scsibus* description.

Make more USB controller devices. You can easily have 6 these days.

Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.

Allow creation of wsmuxctl devices.

Added the clockctl device for macppc

Add PCI bus devices.

Add an entry to make wsmux devices.

don't prevent pty6 from creating ttyv*, since there's no custom console on ttyv

Fix typos in comment.

Create [i-p] partitions too.

Add isdn devices

Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
support was already in $MACHINE/$MACHINE/conf.c.

Add /dev/openfirm

Get the major no right for uscanner.

Prepare for USB scanners, and add Rio 500 support while messing.

Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.

And let's make some audio devices too. Stolen from port-alpha.

branches: 1.28.2;
Revert to decemal numbering. From talking w/ Jason, we really should
support more than 256 ports. That would mean 3 digits in hex, and I
don't want to write the script for that..

Cyclades-Z tty's are now ttyCZ??, not ttyCZ????. Add support for them
to macppc's MAKEDEV.

branches: 1.26.2;
Correct cd* minor number.

Make /dev/usb, a node where USB events can be read.
Also add ttyU to hpcmips.

- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
- now raw partitions are used for memory disk ioctls

Correct md* entries.

Back out previous

Add com device.

Final chown user.group -> chown user:group changes.

branches: 1.19.2;
Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.

Add a comment about ttyU*.

Define the callunit variable for ttyU*.

Move ttyU* before tty*, otherwise it will not work to make ttyU device nodes.

Make creation of wsmux devices a little less confusing.

Rename umodem to ttyU. If it walks like a tty and quacks like a tty
it's a tty.

Add umodem device.

Make wsmux devices.

Teach both mac68k and macppc to create dialout devices. Modeled after
etc.i386/MAKEDEV's support.

Add ttyEcfg.

Add pty0 to "floppy".

On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
create at least eight bpf dev entries. (All except atari).

Add USB devices.

Add wd[01] in all and floppy.

Added RAID devices for everyone!

Add wscons.

Add /dev/scsibus* device nodes.

nvram support.

New files.

MAKEDEV: New `virtio' target for all virtio-related devices.

We can use this to add more as they come up so we don't have to keep
tweaking every etc.${MACHINE}/MAKEDEV.conf every time. Currently
this makes nodes for viocon(4) and vio9p(4).

(Not all GENERIC kernels enable vio9p(4) but I suspect the ones that
don't really should; for those that are disabled because PAGE_SIZE !=
4096, I expect it's just a matter of some additional indexing to make
vio9p(4) work with other page sizes.)

PR kern/59211: vio9p(4): missing from various GENERICs and MAKEDEVs

branches: 1.15.2;
s/substract/subtract/ in comments.

viocon(4): New virtio tty driver imported from OpenBSD.

viocon* at virtio?

/dev/ttyVI??

Tested under qemu with:

qemu-system-aarch64 ... \
-device virtio-serial \
-chardev socket,path=/tmp/ttyVI00,server=on,wait=off,id=ttyVI00 \
-device virtconsole,chardev=ttyVI00,name=org.NetBSD.dev.ttyVI00 \
...

I updated MAKEDEV.conf to create /dev/ttyVI?? on all ports where it
looks likely to work based on:
(a) having pci or a non-pci virtio attachment,
(b) `qemu-system-$ARCH -M ?' mentioned something resembling the port,
and
(c) `qemu-system-$ARCH -device virtio-serial' launched without
complaining about the virtio-serial device.

(Criterion (c) excluded sparc and sparc64.)

Support the use of DHCP in the install environment

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.11.2; 1.11.4;
create more /dev/pci* nodes, for PCIe systems

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.9.30;
Add wd2 and wd3 to the default device set - noted by Donald Lee on port-macppc

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.7.12; 1.7.16;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.6.4;
Enable altq for macppc.

Enable RAIDframe support in the NetBSD-macppc installation media.
Based on patches submitted by Ian Spray in PR port-macppc/30465.

branches: 1.4.6;
Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Move macppc bootable installcd stuff to sys/arch/macppc/stand dirs.

- move installboot (for CD ISO) and mkboothfs (for mkhybrid(8)) tools to
sys/arch/macppc/stand
- also build mkboothfs as ${TOOL_MACPPCMKBOOTHFS} in src/tools
- explicitly generate boothfs file (for mkhybrid(8)) in
sys/arch/macppc/stand/boothfs and install it into /usr/mdec
- use installed /usr/mdec/boothfs to create macppc bootable iso
- move list files for mkhybrid(8) hfs options to etc/etc.macppc

branches: 1.13.2;
Build macppc iso with TOOL_MKHYBRID via "iso-image" target in src/etc.

branches: 1.12.6;
partial port to powerpc64.

Build the UP & SMP kernels for G5s to ease testing.
Currently these kernels have to be netbooted directly from Open Firmware.
Warning: SMP kernel still has issues.

install kernel for ppc601 floppies and iso

branches: 1.9.22; 1.9.24;
since we support 601 hardware now, let's build the kernel for it as well

branches: 1.8.18; 1.8.42; 1.8.56;
Add a comment reminding to update the release notes if the list of
kernels change.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

add GENERIC.MP to KERNEL_SETS on architectures with MP support

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

branches: 1.2.4; 1.2.6;
Build GENERIC_MD too.

Make the release notes, etc.

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

Increase md size to 2MB.

branches: 1.2.2;
Change "floppyinstfs" size to 1.5MB

New files.

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

New files.

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

branches: 1.1.4;
Add a wd version of fstab since most macppc now are ide based

branches: 1.1.4;
Move macppc bootable installcd stuff to sys/arch/macppc/stand dirs.

- move installboot (for CD ISO) and mkboothfs (for mkhybrid(8)) tools to
sys/arch/macppc/stand
- also build mkboothfs as ${TOOL_MACPPCMKBOOTHFS} in src/tools
- explicitly generate boothfs file (for mkhybrid(8)) in
sys/arch/macppc/stand/boothfs and install it into /usr/mdec
- use installed /usr/mdec/boothfs to create macppc bootable iso
- move list files for mkhybrid(8) hfs options to etc/etc.macppc

branches: 1.1.4;
Move macppc bootable installcd stuff to sys/arch/macppc/stand dirs.

- move installboot (for CD ISO) and mkboothfs (for mkhybrid(8)) tools to
sys/arch/macppc/stand
- also build mkboothfs as ${TOOL_MACPPCMKBOOTHFS} in src/tools
- explicitly generate boothfs file (for mkhybrid(8)) in
sys/arch/macppc/stand/boothfs and install it into /usr/mdec
- use installed /usr/mdec/boothfs to create macppc bootable iso
- move list files for mkhybrid(8) hfs options to etc/etc.macppc

branches: 1.1.4;
Move macppc bootable installcd stuff to sys/arch/macppc/stand dirs.

- move installboot (for CD ISO) and mkboothfs (for mkhybrid(8)) tools to
sys/arch/macppc/stand
- also build mkboothfs as ${TOOL_MACPPCMKBOOTHFS} in src/tools
- explicitly generate boothfs file (for mkhybrid(8)) in
sys/arch/macppc/stand/boothfs and install it into /usr/mdec
- use installed /usr/mdec/boothfs to create macppc bootable iso
- move list files for mkhybrid(8) hfs options to etc/etc.macppc

branches: 1.1.4;
enable powerd by default

use a more appropriate terminal type for ttyE*

branches: 1.11.18;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

add ttyE1-3

vt100 is better than unknown for ttyZ[01].

branches: 1.8.20; 1.8.22; 1.8.24;
Replace tty0[0-1] with ttyZ[0-1] because if we list symlinks, PAM
would break and remove tty0[2-7] since they don't exist.

remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.2.10;
Add ttyE0.
Turn off console, turn on ttyE0 and tty00.

New files.