switch over to unified MAKEDEV

reassing majors for crypto and pf to use the newly defined MI major range

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

Put back port specific majors for ptys

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.

whitespace consistency cleanup

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

Add device creation support for systrace.

branches: 1.36.2;
For md*, create md?a instead of just md?.

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Use a tab instead of 7 spaces.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.

Added clockctl

Standardize ch* and uk* descriptions.

Standardize scsibus* description.

Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.

branches: 1.24.4;
Correct md* entries.

Back out previous

Final chown user.group -> chown user:group changes.

branches: 1.21.2;
Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.

Add target for raid devices.

Fix the ttyC*and ttyZ* entries to correctly parse the unit number.

Update MAKEDEV to create cd2401 tty devices. Add getty entries in
"/etc/ttys" for same.

On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
create at least eight bpf dev entries. (All except atari).

Added RAID devices for everyone!

Add /dev/scsibus* device nodes.

Fixes PR #3858: /dev/fd uniformly updated in MAKEDEV to make directory
(and file nodes) owned by root.wheel, and /dev/fd directory mode 755. Now
it matches mtree (and the rest of the system's permissions/owner layout).

add appropriate entry to make "random" as documented in rnd(4).
add "random" entry to "all".

Add 'tty*' target for onboard serial ports. Include in list for 'all'.
(I'm surprised this wasn't spotted earlier...)

branches: 1.11.2;
* st* has perms 660 not 640
* add enss* to ss*
* invoke MAKEDEV.local as $0.local, and reset the umask afterwards

Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.

Make all tty??/pty?? pairs that can be opened by openpty().
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.

Make all MAKEDEVs make fd/* similar. No need for awk or expr.
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.

Added a new device entry for ipfilter: /dev/ipauth

Add ipl, ipnat, and ipstate devices at the appropriate minors of
cdev major 7.

Device rename: `rd' => `md'

add lp

updated MAKEDEV based on i386 version (as requested by mycroft)

add ramdisk, clean

help "make distribution" along

Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.5.16;
Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

also rm & chmod dtyC$unit

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.9.4; 1.9.10; 1.9.12; 1.9.14;
Add a comment reminding to update the release notes if the list of
kernels change.

I suspect ${MAKESUMS} ... -all should be -a; my ${MAKESUMS} doesn't know what
the 'l' option means.

Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add a MAKESUMS variable which invokes makesums with CKSUM in its environment.
Use this whenever we want to invoke makesums.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

Do `make release' for the miniroot too.

Automate the MD `make release|snapshot' procedure.
[I should have done this ages ago.]

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

Increase the size of `rdroot' to 1024 blocks.

branches: 1.3.10;
Need 768 blocks for ramdisk root entry: rdroot.

import rd stuff from sun3

help "make distribution" along

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

RCS Id Police.

help "make distribution" along

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

It's about time we had an /etc/fstab example with SCSI disks.

Switch default console tty from /dev/console to /dev/constty

With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.

The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off

Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)

As discussed on current-users

branches: 1.9.62; 1.9.64;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.8.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

Mention mvme172/mvme177 and correct an error on the ttyZ1 line.

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.2.10;
Update MAKEDEV to create cd2401 tty devices. Add getty entries in
"/etc/ttys" for same.

help "make distribution" along