switch over to unified MAKEDEV

reassing majors for crypto and pf to use the newly defined MI major range

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

Put back port specific majors for ptys

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

make ipl consistently "IP Filter"

Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.

whitespace consistency cleanup

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Sync "sh $0.local all" lines.

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

Add device creation support for systrace.

branches: 1.30.2;
Remove st1 and unnecessary wscons devices from floppy.

Make also sd2 and sd3 devices for install floppy.

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Use a tab instead of 7 spaces.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.

Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.

Added clockctl

Standardize ch* and uk* descriptions.

Add ss, uk, ch descriptions.

Standardize scsibus* description.

Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.

Allow creation of wsmuxctl devices.

Add an entry to make wsmux devices.

Split fd/* device entry from all target (for install floppy).

Add wscons.

Make md(4) device files on "all" target.

Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.

branches: 1.9.4;
Add "floppy" target.

- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
- now raw partitions are used for memory disk ioctls

Correct md* entries.

Back out previous

Final chown user.group -> chown user:group changes.

More user.group -> user:group pedantry (these are the loose ends).

branches: 1.3.2;
Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.

Add ipl and raid to 'MAKEDEV all'

Add newsmips etc stuff.

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.

branches: 1.6.4; 1.6.10; 1.6.12; 1.6.14;
Add a comment reminding to update the release notes if the list of
kernels change.

Do ${MAKESUMS} for install floppies.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Add MD Makefile.inc for newsmips to make release.
XXX distrib/notes/newsmips is not yet.

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

Add entries for install floppy.

Add newsmips etc stuff.

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

Add newsmips etc stuff.

Switch default console tty from /dev/console to /dev/constty

With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.

The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off

Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)

As discussed on current-users

branches: 1.9.34; 1.9.36;
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.

branches: 1.8.18; 1.8.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.7.20;
- tty0? -> ttyZ?
- add ttyE0

remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.1.10;
Add newsmips etc stuff.