| History log of /src/etc/etc.next68k |
| Revision | Date | Author | Comments |
| 1.46 | 24-Oct-2003 |
jdolecek | switch over to unified MAKEDEV
|
| 1.45 | 10-Oct-2003 |
jdolecek | reassing majors for crypto and pf to use the newly defined MI major range
|
| 1.44 | 03-Oct-2003 |
dsl | Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
|
| 1.43 | 05-Sep-2003 |
dsl | Put back port specific majors for ptys
|
| 1.42 | 30-Aug-2003 |
dsl | Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
|
| 1.41 | 22-Aug-2003 |
itojun | create /dev/crypto
|
| 1.40 | 27-Jul-2003 |
itojun | reserve cdev major # for PF. ok'ed by technical-exec
|
| 1.39 | 27-Apr-2003 |
ragge | Add ksyms to "std" devices.
|
| 1.38 | 17-Apr-2003 |
fvdl | Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
|
| 1.37 | 31-Mar-2003 |
perry | make ipl consistently "IP Filter"
|
| 1.36 | 30-Mar-2003 |
wiz | Sync vnd descriptions to one wording.
|
| 1.35 | 30-Mar-2003 |
wiz | Uppercase scsi.
|
| 1.34 | 30-Mar-2003 |
wiz | Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.
|
| 1.33 | 21-Oct-2002 |
lukem | whitespace consistency cleanup
|
| 1.32 | 04-Oct-2002 |
elric | Include cgd on the list of things to be mknod(8)ed on all arches.
|
| 1.31 | 09-Aug-2002 |
lukem | - in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.30 | 18-Jun-2002 |
wiz | Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
|
| 1.29 | 17-Jun-2002 |
christos | Add device creation support for systrace.
|
| 1.28 | 13-Mar-2002 |
simonb | branches: 1.28.2;
Remove trailing semicolons from lines that don't need them.
TABify many lines.
|
| 1.27 | 04-Mar-2002 |
lukem | various cleanups inspired by etc.i386/MAKEDEV:
* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"
* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent
* when making directories, don't use -p and don't redirect stdout to /dev/null
* clean up whitespace
* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)
* don't barf when we have fdesc mounted; just skip the devices fdesc provides
(these files should really be automagically generated...)
|
| 1.26 | 03-Mar-2002 |
toshii | Use a tab instead of 7 spaces.
|
| 1.25 | 25-Feb-2002 |
atatat | Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.
|
| 1.24 | 02-Feb-2002 |
tls | Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
|
| 1.23 | 02-Feb-2002 |
tls | Add support for many more (930 or 992) ptys than the current 256.
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
|
| 1.22 | 21-Jan-2002 |
abs | Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.
|
| 1.21 | 19-Jan-2002 |
oster | Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.
|
| 1.20 | 13-Jan-2002 |
manu | Added clockctl
|
| 1.19 | 19-Dec-2001 |
wiz | Standardize ch* and uk* descriptions.
|
| 1.18 | 29-Oct-2001 |
augustss | Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.
|
| 1.17 | 13-Oct-2001 |
augustss | Allow creation of wsmuxctl devices.
|
| 1.16 | 10-Sep-2001 |
augustss | Add an entry to make wsmux devices.
|
| 1.15 | 27-Jul-2000 |
mason | Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.
|
| 1.14 | 21-Jan-2000 |
tsutsui | branches: 1.14.4;
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
- now raw partitions are used for memory disk ioctls
|
| 1.13 | 10-Jan-2000 |
deberg | gc unused mac68k devices
|
| 1.12 | 18-Dec-1999 |
tsutsui | Correct md* entries.
|
| 1.11 | 18-Oct-1999 |
ad | Back out previous
|
| 1.10 | 06-Oct-1999 |
ad | Final chown user.group -> chown user:group changes.
|
| 1.9 | 21-Sep-1999 |
hubertf | branches: 1.9.2;
remove empty line
|
| 1.8 | 18-Sep-1999 |
hubertf | Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
|
| 1.7 | 25-Aug-1999 |
augustss | Make creation of wsmux devices a little less confusing.
|
| 1.6 | 29-Jul-1999 |
augustss | Make wsmux devices.
|
| 1.5 | 24-Mar-1999 |
dbj | add ttyEcfg
|
| 1.4 | 02-Jan-1999 |
dbj | applied patches from port-next68k/6708: add wscons devices to next68k MAKEDEV
|
| 1.3 | 13-Nov-1998 |
oster | Added RAID devices for everyone!
|
| 1.2 | 15-Oct-1998 |
thorpej | Add /dev/scsibus* device nodes.
|
| 1.1 | 09-Jun-1998 |
dbj | initial import
|
| 1.9.2.1 | 27-Dec-1999 |
wrstuden | Pull up to last week's -current.
|
| 1.14.4.1 | 11-Aug-2000 |
mason | Create 64 PTYs in "all" target by default.
Requested by mason, approved by jhawk.
|
| 1.28.2.1 | 10-Aug-2002 |
lukem | Pull up revision 1.31 (requested by lukem):
- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.7 | 11-Feb-2023 |
tsutsui | Build a RAMDISK root kernel on NetBSD/next68k release build.
No sysinst(8) yet, but useful on bootstrap and rescue ops.
|
| 1.6 | 15-Jan-2023 |
tsutsui | Remove obsolete bpf entries not neceerary for clonified bpf(4).
Fixes "MAKEDEV: bpf8: unknown device" errors.
|
| 1.5 | 09-Jul-2017 |
tsutsui | branches: 1.5.8; 1.5.16;
Revert the previous changes for PR/52377.
- the names "ttya" and "ttyb" in zs(4) man page were leftover of the orignal
sparc/sun3 ports which used the same name for their native SunOS users
- symlinks ttya -> tty00 -> ttyZ0 (by "lndev tty00 ttya") are awful anyway
(symlinks tty0? -> ttyZ? are handled in MI MAKEDEV.tmpl)
See details on discussion on source-changes-d@:
http://mail-index.netbsd.org/source-changes-d/2017/07/thread1.html#009301
|
| 1.4 | 07-Jul-2017 |
christos | PR/52377: Miod Vallat: Provide links to ttya and ttyb as mentioned in zs(4)
|
| 1.3 | 15-Jan-2007 |
hubertf | Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@
|
| 1.2 | 19-Oct-2003 |
jdolecek | branches: 1.2.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
|
| 1.1 | 15-Oct-2003 |
jdolecek | MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
|
| 1.2.16.1 | 18-Feb-2007 |
tron | Pull up following revision(s) (requested by hubertf in ticket #429):
etc/etc.bebox/MAKEDEV.conf: revision 1.5
etc/etc.x68k/MAKEDEV.conf: revision 1.8
etc/etc.next68k/MAKEDEV.conf: revision 1.3
etc/etc.ofppc/MAKEDEV.conf: revision 1.5
etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
etc/etc.amd64/MAKEDEV.conf: revision 1.8
etc/etc.algor/MAKEDEV.conf: revision 1.4
etc/etc.sparc64/MAKEDEV.conf: revision 1.12
etc/etc.hp300/MAKEDEV.conf: revision 1.11
etc/etc.sgimips/MAKEDEV.conf: revision 1.8
etc/etc.pc532/MAKEDEV.conf: revision 1.5
etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
etc/etc.pmppc/MAKEDEV.conf: revision 1.6
etc/etc.cobalt/MAKEDEV.conf: revision 1.4
etc/etc.evbmips/MAKEDEV.conf: revision 1.4
etc/etc.sparc/MAKEDEV.conf: revision 1.11
etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
etc/etc.i386/MAKEDEV.conf: revision 1.12
etc/etc.acorn32/MAKEDEV.conf: revision 1.8
etc/etc.evbppc/MAKEDEV.conf: revision 1.5
etc/etc.amiga/MAKEDEV.conf: revision 1.10
etc/etc.prep/MAKEDEV.conf: revision 1.4
etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
etc/MAKEDEV.tmpl: revision 1.71
etc/etc.alpha/MAKEDEV.conf: revision 1.7
etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
etc/etc.macppc/MAKEDEV.conf: revision 1.7
etc/etc.mmeye/MAKEDEV.conf: revision 1.5
etc/etc.mac68k/MAKEDEV.conf: revision 1.7
etc/etc.vax/MAKEDEV.conf: revision 1.10
etc/etc.arc/MAKEDEV.conf: revision 1.6
etc/etc.hp700/MAKEDEV.conf: revision 1.4
etc/etc.mipsco/MAKEDEV.conf: revision 1.3
etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@
|
| 1.5.16.2 | 22-Feb-2023 |
martin | Pull up following revision(s) (requested by tsutsui in ticket #91):
etc/etc.next68k/MAKEDEV.conf: revision 1.7
sys/arch/next68k/conf/GENERIC: revision 1.156
sys/arch/next68k/conf/GENERIC: revision 1.157
sys/arch/next68k/conf/GENERIC: revision 1.158
distrib/next68k/instkernel/Makefile: revision 1.1
sys/arch/next68k/conf/GENERIC: revision 1.159
distrib/next68k/ramdisk/list: revision 1.1
etc/etc.next68k/Makefile.inc: revision 1.8
sys/arch/next68k/conf/RAMDISK: revision 1.5
distrib/next68k/ramdisk/dot.profile: revision 1.1
sys/arch/next68k/conf/SLAB: revision 1.62
sys/arch/next68k/conf/GENERIC: revision 1.160
sys/arch/next68k/conf/SLAB: revision 1.63
sys/arch/next68k/conf/GENERIC: revision 1.161
distrib/next68k/ramdisk/Makefile: revision 1.1
sys/arch/next68k/conf/majors.next68k: revision 1.26
distrib/next68k/Makefile: revision 1.2
Remove trailing TABs.
Remove trailing spaces and TABs.
Enable file-system CD9660.
It's useful for installation especially on emulators.
Remove nonexistent options SWAPDEBUG.
Remove unnecessary commented out lines.
Disable rarely used options and devices, and add options MODULAR instead.
Also enable files-system MSDOS for file exchange via removable media.
Build a RAMDISK root kernel on NetBSD/next68k release build.
No sysinst(8) yet, but useful on bootstrap and rescue ops.
|
| 1.5.16.1 | 06-Feb-2023 |
martin | Pull up following revision(s) (requested by tsutsui in ticket #67):
etc/etc.next68k/MAKEDEV.conf: revision 1.6
Remove obsolete bpf entries not neceerary for clonified bpf(4).
Fixes "MAKEDEV: bpf8: unknown device" errors.
|
| 1.5.8.1 | 06-Feb-2023 |
martin | Pull up following revision(s) (requested by tsutsui in ticket #1586):
etc/etc.next68k/MAKEDEV.conf: revision 1.6
Remove obsolete bpf entries not neceerary for clonified bpf(4).
Fixes "MAKEDEV: bpf8: unknown device" errors.
|
| 1.8 | 11-Feb-2023 |
tsutsui | Build a RAMDISK root kernel on NetBSD/next68k release build.
No sysinst(8) yet, but useful on bootstrap and rescue ops.
|
| 1.7 | 18-Mar-2008 |
lukem | branches: 1.7.76;
Convert all the etc/etc.*/Makefile.inc to use RELEASEDIR/RELEASEMACHINEDIR
just like etc/Makefile does.
|
| 1.6 | 24-Jul-2007 |
pavel | branches: 1.6.4; 1.6.10; 1.6.12; 1.6.14;
Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.5 | 03-Jan-2003 |
lukem | Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".
${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.
|
| 1.4 | 02-Dec-2002 |
lukem | - add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
|
| 1.3 | 05-Jun-2002 |
deberg | copy bootloader to RELEASEDIR/installation
|
| 1.2 | 29-Nov-2001 |
thorpej | branches: 1.2.2;
Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
|
| 1.1 | 22-Jul-2000 |
briggs | Add a Makefile.inc with snap_md_post to build and install release notes
for a make release or make snapshot.
|
| 1.2.2.1 | 06-Jun-2002 |
lukem | Pull up revision 1.3 (requested by deberg in ticket #179):
copy bootloader to RELEASEDIR/installation
|
| 1.6.14.2 | 24-Jul-2007 |
pavel | Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.6.14.1 | 24-Jul-2007 |
pavel | file Makefile.inc was added on branch matt-mips64 on 2007-07-24 10:49:28 +0000
|
| 1.6.12.1 | 03-Apr-2008 |
mjf | Sync with HEAD.
|
| 1.6.10.1 | 24-Mar-2008 |
keiichi | sync with head.
|
| 1.6.4.1 | 23-Mar-2008 |
matt | sync with HEAD
|
| 1.7.76.1 | 22-Feb-2023 |
martin | Pull up following revision(s) (requested by tsutsui in ticket #91):
etc/etc.next68k/MAKEDEV.conf: revision 1.7
sys/arch/next68k/conf/GENERIC: revision 1.156
sys/arch/next68k/conf/GENERIC: revision 1.157
sys/arch/next68k/conf/GENERIC: revision 1.158
distrib/next68k/instkernel/Makefile: revision 1.1
sys/arch/next68k/conf/GENERIC: revision 1.159
distrib/next68k/ramdisk/list: revision 1.1
etc/etc.next68k/Makefile.inc: revision 1.8
sys/arch/next68k/conf/RAMDISK: revision 1.5
distrib/next68k/ramdisk/dot.profile: revision 1.1
sys/arch/next68k/conf/SLAB: revision 1.62
sys/arch/next68k/conf/GENERIC: revision 1.160
sys/arch/next68k/conf/SLAB: revision 1.63
sys/arch/next68k/conf/GENERIC: revision 1.161
distrib/next68k/ramdisk/Makefile: revision 1.1
sys/arch/next68k/conf/majors.next68k: revision 1.26
distrib/next68k/Makefile: revision 1.2
Remove trailing TABs.
Remove trailing spaces and TABs.
Enable file-system CD9660.
It's useful for installation especially on emulators.
Remove nonexistent options SWAPDEBUG.
Remove unnecessary commented out lines.
Disable rarely used options and devices, and add options MODULAR instead.
Also enable files-system MSDOS for file exchange via removable media.
Build a RAMDISK root kernel on NetBSD/next68k release build.
No sysinst(8) yet, but useful on bootstrap and rescue ops.
|
| 1.4 | 19-Dec-2002 |
jdolecek | use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries
the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
|
| 1.3 | 09-Apr-2002 |
tron | Back out last change because we now have a special disktab for the
FFS regression test.
|
| 1.2 | 09-Apr-2002 |
tron | Add missing "floppy288" entry required for FFS regression test.
|
| 1.1 | 09-Jun-1998 |
dbj | initial import
|
| 1.5 | 04-May-2002 |
jdolecek | Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.
|
| 1.4 | 26-Nov-2001 |
lukem | fix mfs examples
|
| 1.3 | 24-Apr-1999 |
dbj | fixed syntax for using an nfs mounted mfs partition
|
| 1.2 | 24-Apr-1999 |
dbj | Added example mfs /tmp in fstab
Added wscons entries in ttys, but leave default "console" enabled
since some hardware still uses the serial port console
|
| 1.1 | 09-Jun-1998 |
dbj | initial import
|
| 1.11 | 25-Sep-2019 |
abs | Switch default console tty from /dev/console to /dev/constty
With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.
The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off
Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)
As discussed on current-users
|
| 1.10 | 13-Jun-2012 |
martin | branches: 1.10.34; 1.10.36;
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
|
| 1.9 | 07-Oct-2008 |
abs | branches: 1.9.18; 1.9.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
|
| 1.8 | 20-Jun-2004 |
christos | branches: 1.8.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
|
| 1.7 | 04-Oct-2003 |
dsl | Revert 'console' back to /dev/console (from /dev/constty)
|
| 1.6 | 03-Oct-2003 |
dsl | Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
|
| 1.5 | 13-Feb-2002 |
martti | Added ttyp[g-zA-Z] (bin/15594).
|
| 1.4 | 12-Aug-2000 |
mason | This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
|
| 1.3 | 24-Apr-1999 |
dbj | branches: 1.3.8;
change default console terminal type to "unknown" instead of "dumb"
|
| 1.2 | 24-Apr-1999 |
dbj | Added example mfs /tmp in fstab
Added wscons entries in ttys, but leave default "console" enabled
since some hardware still uses the serial port console
|
| 1.1 | 09-Jun-1998 |
dbj | branches: 1.1.2;
initial import
|
| 1.1.2.1 | 26-Apr-1999 |
perry | pullup 1.1->1.3 (dbj)
|
| 1.3.8.1 | 12-Aug-2000 |
mason | This should be the last piece of the move to 64 default PTYs. /etc/ttys now
has entries for 64 ptys.
Thanks to Matthew Green for pointing out the need for this.
|
| 1.8.26.1 | 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.9.20.1 | 24-Jun-2012 |
riz | Pull up following revision(s) (requested by martin in ticket #342):
etc/etc.shark/ttys: revision 1.8
etc/etc.hpcsh/ttys: revision 1.11
etc/etc.amiga/ttys: revision 1.24
etc/etc.arc/ttys: revision 1.8
etc/etc.alpha/ttys: revision 1.12
etc/etc.amigappc/ttys: revision 1.3
etc/etc.ofppc/ttys: revision 1.9
etc/etc.hp300/ttys: revision 1.16
etc/etc.rs6000/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.20
etc/etc.acorn26/ttys: revision 1.4
etc/etc.iyonix/ttys: revision 1.4
etc/etc.netwinder/ttys: revision 1.8
etc/etc.mac68k/ttys: revision 1.20
etc/etc.evbarm/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.15
etc/etc.hpcmips/ttys: revision 1.10
share/terminfo/terminfo: revision 1.5
etc/etc.mvmeppc/ttys: revision 1.6
etc/etc.next68k/ttys: revision 1.10
etc/etc.acorn32/ttys: revision 1.9
etc/etc.ibmnws/ttys: revision 1.4
etc/etc.atari/ttys: revision 1.10
etc/etc.sgimips/ttys: revision 1.10
etc/etc.newsmips/ttys: revision 1.9
etc/etc.hpcarm/ttys: revision 1.6
etc/etc.cats/ttys: revision 1.7
etc/etc.amd64/ttys: revision 1.6
etc/etc.prep/ttys: revision 1.8
etc/etc.zaurus/ttys: revision 1.3
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
Add a delete key capability to our wsvt25 entry. Fixes a problem noted by
David Lord on netbsd-users.
|
| 1.9.18.1 | 30-Oct-2012 |
yamt | sync with head
|
| 1.10.36.1 | 28-Oct-2019 |
martin | Pull up following revision(s) (requested by abs in ticket #384):
etc/etc.evbmips/ttys: revision 1.7
etc/etc.sparc64/ttys: revision 1.12
etc/etc.shark/ttys: revision 1.9
etc/etc.amiga/ttys: revision 1.25
etc/etc.arc/ttys: revision 1.9
etc/etc.sbmips/ttys: revision 1.6
etc/etc.landisk/ttys: revision 1.4
etc/etc.alpha/ttys: revision 1.13
etc/etc.amigappc/ttys: revision 1.4
etc/etc.mmeye/ttys: revision 1.8
etc/etc.ia64/ttys: revision 1.2
etc/etc.sandpoint/ttys: revision 1.8
etc/etc.hp300/ttys: revision 1.17
etc/etc.riscv/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.21
etc/etc.aarch64/ttys: revision 1.2
etc/etc.algor/ttys: revision 1.6
etc/etc.sparc/ttys: revision 1.17
etc/etc.mipsco/ttys: revision 1.7
etc/etc.luna68k/ttys: revision 1.9
etc/etc.iyonix/ttys: revision 1.5
etc/etc.evbcf/ttys: revision 1.3
etc/etc.netwinder/ttys: revision 1.9
etc/etc.mvme68k/ttys: revision 1.10
etc/etc.evbarm/ttys: revision 1.8
etc/etc.evbsh3/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.16
etc/etc.hpcmips/ttys: revision 1.12
etc/etc.vax/ttys: revision 1.10
etc/etc.news68k/ttys: revision 1.10
etc/etc.mvmeppc/ttys: revision 1.7
etc/etc.hppa/ttys: revision 1.2
etc/etc.next68k/ttys: revision 1.11
etc/etc.ews4800mips/ttys: revision 1.3
etc/etc.epoc32/ttys: revision 1.2
etc/etc.emips/ttys: revision 1.2
etc/etc.evbppc/ttys: revision 1.7
etc/etc.sgimips/ttys: revision 1.11
etc/etc.or1k/ttys: revision 1.2
etc/etc.cesfic/ttys: revision 1.6
etc/etc.amd64/ttys: revision 1.7
etc/etc.playstation2/ttys: revision 1.7
etc/etc.zaurus/ttys: revision 1.4
etc/etc.newsmips/ttys: revision 1.10
Switch default console tty from /dev/console to /dev/constty
With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.
The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off
Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)
As discussed on current-users
|
| 1.10.34.1 | 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
