switch over to unified MAKEDEV

reassing majors for crypto and pf to use the newly defined MI major range

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

add isdn telephony dialout devices

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

make ipl consistently "IP Filter"

Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.

don't bother creating /dev/io on archs which don't support it

whitespace consistency cleanup

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

Add device creation support for systrace.

branches: 1.21.2;
Remove /dev/pms0 creation from ports that do not have the driver;
obsolete it on the ones that had it in the 'all' target.

Remove devices from 'all' that we can't make.

Rename ISDN devices, per discussion on tech-kern. The network devices
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Use a tab instead of 7 spaces.

Bring pseudo terminal devices' major numbers in sync with reality again.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.

Added clockctl

fix a couple of spelling mistakes in the i4b* descriptions

Standardize ch* and uk* descriptions.

Standardize scsibus* description.

16 partitions

Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.

Allow creation of wsmuxctl devices.

Add an entry to make wsmux devices.

remove all reference to ttyv* to pccons, since the kernels for these ports
don't implement a character device at the referenced major number (12).

Support files for the sandpoint

Create /dev/flashN device nodes for all_md.

Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

Add raid0 to init), in case we have /tmp on mfs.

branches: 1.14.2;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Also create device nodes for wd2 and wd3. Up to 4 disks in a NAS system are
not unusual.

branches: 1.12.2;
Added missing devices: usb, sysmon, altq

Revert the major number for satmgr(4) back to 100 and allocate it from
majors.powerpc, as suggested by matt@.

Changed satmgr(4) device major number from 100 to 144, which is reserved
for local/vendor use according to src/sys/conf/majors. This prevents
problems when the shared PowerPC device majors list gets another entry.

Make /dev/satmgr (Sandpoint-MPC824x specific) and /dev/power devices.

Make sure tty00 and tty01 are linked to com(4).
The default for the unified PPC devices was to set a hard link to ttyZ*,
which uses the zstty(4) driver (not used on any Sandpoint board so far).

Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.6.4; 1.6.8; 1.6.12;
- more arrangement to have minimal devices for init) and ramdisk) cases.
- make sure to have four tty[00-03] and assign 115200bps for the first.

- add minimalist init) clause for the case of empty /dev directory.
- since no floppy drive is useful even with standard SP3 and EnCorePP1
configuration, floppy related descriptions will be removed in future.
installation procedure needs to have renovations.

branches: 1.4.4;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.3.16;
determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

use target 'wscons' to create wscons-related devices; this creates
also some additional control devices besides the terminal devices, which
are needed for full operation

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

The sandpoint port is now focussed on 824x based NAS boxes.
Replaced GENERIC by GENERIC.NAS.
Added INSTALL_KURO for KuroBox.
GENERIC.NAS and RAMDISK are no longer needed.

Excluded KUROBOX from GENERIC.NAS because console is on a different port.
Add INET6 option to GENERIC(.NAS).
Build KUROBOX kernel together with GENERIC and GENERIC.NAS.
Patch submitted by Toru Nishimura.

- add GENERIC.NAS to a standard sandpoint distribution.

dismiss GENERIC.X2 kernel to build as the conf file has gone.

branches: 1.9.4; 1.9.6;
Add a comment reminding to update the release notes if the list of
kernels change.

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

Make GENERIC.X2 as well as GENERIC, and include the srec versions.

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Supply a snap_md_post for sandpoint.

Add INSTALL as a BUILD_KERNEL.

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

Reflect correct architecture in comment.

Support files for the sandpoint

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

Add a floppyinstfs

Support files for the sandpoint

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

Add template fstabs for NFS and scsi disk.

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

Add template fstabs for NFS and scsi disk.

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

fix mfs examples

Support files for the sandpoint

Switch default console tty from /dev/console to /dev/constty

With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.

The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off

Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)

As discussed on current-users

branches: 1.7.48; 1.7.50;
Adapted for NAS systems. Use vt100 with 115200bps instead of Pc3 console.

Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.5.4; 1.5.8;
- more arrangement to have minimal devices for init) and ramdisk) cases.
- make sure to have four tty[00-03] and assign 115200bps for the first.

branches: 1.4.16;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Support files for the sandpoint