switch over to unified MAKEDEV

fix pasto in pty target

reassing majors for crypto and pf to use the newly defined MI major range

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

Put back port specific majors for ptys

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

make ipl consistently "IP Filter"

whitespace consistency cleanup

add ipfilter.

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

Add device creation support for systrace.

When making devices for the ramdisk, instead of making character
devices for CD-ROMs, which aren't useful on the ramdisk, make
block devices instead. This makes it easier to boot a CD-ROM
and install a miniroot from same.

branches: 1.43.2;
Added support for the __ramdisk pseudo-argument. When given,
we make fewer devices to conserve inodes on the ramdisk.
(ripped off from rev 1.12 of etc.sun2/MAKEDEV)

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Use a tab instead of 7 spaces.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.

Added clockctl

Standardize scsibus* description.

Make ccd(4) and vnd(4) device files on "MAKEDEV all".

Make md(4) device files on "all" target.

Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.

branches: 1.30.4;
- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
- now raw partitions are used for memory disk ioctls

Correct md* entries.

Back out previous

Final chown user.group -> chown user:group changes.

branches: 1.26.2;
Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.

branches: 1.25.2;
On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
create at least eight bpf dev entries. (All except atari).

Added RAID devices for everyone!

Add /dev/scsibus* device nodes.

Add fd0

MAKEDEV all will make lkm

Fixes PR #3858: /dev/fd uniformly updated in MAKEDEV to make directory
(and file nodes) owned by root.wheel, and /dev/fd directory mode 755. Now
it matches mtree (and the rest of the system's permissions/owner layout).

add appropriate entry to make "random" as documented in rnd(4).
add "random" entry to "all".

Add u?random (also use the mk function a couple more places).

Added lkm [PR/4421]. <nathanw@mit.edu>

branches: 1.16.2;
* use $0 instead of MAKEDEV
* use $((...)) instead of `eval ...`
* st* and md* are now root.operator 640
* reset the umask after running MAKEDEV.local

Use DISKUNIT macro to encode md's unit in the minor number.

Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.

Make all tty??/pty?? pairs that can be opened by openpty().
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.

Make all MAKEDEVs make fd/* similar. No need for awk or expr.
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.

add /dev/leds

Device rename: `rd' => `md'

merge in 1.2 branch

branches: 1.8.4;
RCS id police.

Add fd to all; stdin, stdout, and stderr to std

allow any unit on st

branches: 1.5.2;
Add rd*

Add entries for the ccd.

Add cg*, st*

Add vnd

branches: 1.1.1;
Initial revision

Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

branches: 1.17.18;
Add a comment reminding to update the release notes if the list of
kernels change.

ttyaction is ${MACHINE}-specific, not per ${MACHINE_ARCH}
remove special ttyaction hook from etc/etc.sun[23]/Makefile.inc, it's no longer
needed
ld.so.conf is ${MACHINE}-specific, the code happened to work for i386 and sparc
only because ${MACHINE} == ${MACHINE_ARCH} there
remove basesrc/etc/ld.so.conf and its special vax/ns32k/m68k hook in Makefile -
vax & m68k are ELF now, and ns32k doesn't need to be handled here

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

- consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

Also build and install installation notes under "make release"
(actually snap_md_post).

branches: 1.10.4;
Let the main Makefile deal with building kernels.

Define our own snap_kern target that builds all the kernels, but
does not install the un-patched ramdisk kernels. The snap_md_post
target builds the installation ramdisk image, patches that into the
ramdisk kernels, and installs them. Also the miniroot.
Automated snapshot build works now.

branches: 1.8.2;
Update all this crap so that `make snapshot' makes snapshots in release(7)
format, rather than in some unknown format. Also clean up the code a bit,
remove some code duplication, and add documentation to the Makefile.

Use "${MAKE}" instead of "make" for cross compilation.

These commits do two things:

1. Provide a consistent and extensible framework for compiling
kernels for the "make snapshot" target.

2. Add OBJDIR support for the "make snapshot" target, in the form
of three new make variables: KERNOBJDIR, KERNSRCDIR, and KERNCONFDIR.
Default values are in the Makefile.inc, and for OBJDIR they should
be defined in /etc/mk.conf as

KERNSRCDIR=${BSDSRCDIR}/sys
KERNOBJDIR=${BSDOBJDIR}/sys/arch/${MACHINE}/compile

The next step is to make a new target in the src/etc/Makefile for "release"
(or something like that) to make release(7) format files.

OBJDIR support for "make snapshot"

Build both sun3 and sun3x kernels

Add BIN3+=etc.sun3/ttyaction

branches: 1.2.2;
don't try to copy nonexistent README, & RCSid police

Include kernels GENERIC, DISKLESS in binary snapshots.

obsolete stuff that's be superceeded by /usr/src/distrib/...

Bring this up-to-date.

Lots of new stuff.

New text - describes the binary snapshot.

Fix some errors.

branches: 1.1.2;
first cut

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

branches: 1.6.2;
Fix blocksize to match ns/nt/nc.

branches: 1.5.6;
Increase ramdisk size

updates for the 1.4 release

branches: 1.3.6;
miniroot is now 8MB

branches: 1.2.2;
New stuff used during installation.

branches: 1.1.2;
first cut

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

RCS Id Police.

Add the options ...,-r=1024,-w=1024 to this example.

Fix some errors.

branches: 1.1.2;
first cut

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

RCS Id Police.

ufs => ffs

branches: 1.1.2;
New stuff used during installation.

obsolete stuff that's be superceeded by /usr/src/distrib/...

No more zupdate

New text - describes the binary snapshot.

branches: 1.1.2;
first cut

chown user.group -> chown user:group

according to cvs log of basesrc/etc/etc.sun3/ttyaction and
archive of source-changes, it was backed out with MAKEDEV
because of portability issue.
but i think ttyaction doesn't have that issue as it's never
executed on non-NetBSD environment.

Back out previous

More user.group -> user:group pedantry (these are the loose ends).

branches: 1.1.2; 1.1.6;
Run getty on the actual devices (not /dev/console) so that
/etc/ttyaction does its thing for /dev/kd but not /dev/ttya

Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.9.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.4.10;
Run getty on the actual devices (not /dev/console) so that
/etc/ttyaction does its thing for /dev/kd but not /dev/ttya

branches: 1.3.2;
merge in 1.2 branch

branches: 1.2.6;
Run gettys on: /dev/ttya, /dev/kd
Do not run it on /dev/console
(Only init should open /dev/console for input.)

branches: 1.1.1;
Initial revision