Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.

XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.

Add a default power_button script for powerd(8).

branches: 1.8.2;
Add example hotkey_button script

branches: 1.7.4;
Add the /etc/powerd/scripts/sensor_indicator to handle events on
indicator sensors.

Update powerd(8).

Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Install all example powerd scripts by default.

Consistently use CONFIGFILES & CONFIGLINKS (which enable the 'configinstall'
target) instead of using home-grown 'distribution' targets or using
FILES with the 'install' target.
Add some etc/ subdir Makefiles where appropriate.

XXX: some of etc/Makefile install-etc-files could be converted to CONFIGFILES.

improve comment

Add a reset_button script.

Add a default power_button script for powerd(8).

Remove the sony(4) and piixpcib(4) based actions; all powerd(8) scripts
should either be machine-independent or provide hints for the user. Also
clean the script a little.

Enclose the ifconfig commands in $(...) so they actually do something.

Reported on current-users by Pierre Pronchery <khorben at defora dot org>

branches: 1.2.18; 1.2.22;
fix a couple of comments

Add useful example scripts for powerd acadapter, lid_switch, and
sleep_button events. These use the /dev/apm interface, so should be useful
on more than just i386.

branches: 1.2.2;
try to use programs from base (from anon ymous) sudo -> su

branches: 1.1.2;
Add example hotkey_button script

Remove the apm(8) example. Instead point to the sleep_button -script.

adapt to how backlight control is supposed to work - just flip the switch and
we don't need to save the brightness level

use '/etc/rc.d/apmd onestatus' rather than '/etc/rc.d/apmd status',
so we DTRT if apmd is set to NO in rc.conf

save backlight level and turn it off on lid close, restore on lid open

Don't try to standby on a lid_switch pressed event, this has a few problems:
1. ACPI S1 doesn't work properly for many people on NetBSD
2. It prevents someone from using their laptop with an external display

branches: 1.4.18; 1.4.22;
fix a couple of comments

Add useful example scripts for powerd acadapter, lid_switch, and
sleep_button events. These use the /dev/apm interface, so should be useful
on more than just i386.

Oops, fix comments.

Add dummy scripts for these events.

Announce a reason for the shutdown.

Use logger(1) to log errors -- otherwise the output goes nowhere.

Add a default power_button script for powerd(8).

Announce a reason for the shutdown.

Use logger(1) to log errors -- otherwise the output goes nowhere.

Add a reset_button script.

Add some states not handled before. XXX: are both states in the | cases
possible?

branches: 1.7.6; 1.7.12;
Add cases for new {high,maximum}-capacity events

Long-overdue update. Need to handle both {warning,critical}-capacity
events.

Also log the 'low-power' event via logger -p warning to have records
of what happened.

Fix the problems described in:
http://mail-index.netbsd.org/current-users/2007/07/16/0012.html

- Introduce sme_class into the sysmon_envsys struct to specify a
class; currently there are two classes: SME_CLASS_ACADAPTER and
SME_CLASS_BATTERY.

- Add a new envsys event: PENVSYS_EVENT_LOW_POWER that is reached when
all SME_CLASS_BATTERY devices are in CRITICAL/LOW state and there's not
any SME_CLASS_ACADAPTER connected.

- Add the 'low-power' event into the sensor_battery script that will
shutdown the system gracefully via 'shutdown -p'. If powerd(8) is
not running, cpu_reboot(9) with RB_POWERDOWN is used.

- Make acpiacad(4) a SME_CLASS_ACADAPTER device and acpibat(4) a
SME_CLASS_BATTERY device.

Update the documentation accordingly to these changes.

Only three events are reported now:

normal
state-changed
user-capacity

But there's a fourth argument passed to the script that will report
current state description.

branches: 1.2.4;
Do not shutdown the system when a critical event is received, this
doesn't work when there are two or more batteries in acpibat(4).

Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Fix a typo in previous.

Use consistenly more meaningful messages in all envsys scripts.

branches: 1.1.4;
Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Handle any reports of state changes for INDICATORs

branches: 1.4.30; 1.4.32;
Fix a typo in previous.

Use consistenly more meaningful messages in all envsys scripts.

branches: 1.2.4;
This one is shared for Indicators and Integers... update the comment.

Add the /etc/powerd/scripts/sensor_indicator to handle events on
indicator sensors.

Update powerd(8).

Fix a typo in previous.

Use consistenly more meaningful messages in all envsys scripts.

branches: 1.1.4;
Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Fix a typo in previous.

Use consistenly more meaningful messages in all envsys scripts.

branches: 1.1.4;
Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Gracefully shutdown upon reaching critical temperature levels. Prevents few
laptops (ThinkPad T61 and x61s, among others) from hitting the in-CPU reset.

branches: 1.3.30; 1.3.32;
Fix a typo in previous.

Use consistenly more meaningful messages in all envsys scripts.

branches: 1.1.4;
Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Fix a typo in previous.

Use consistenly more meaningful messages in all envsys scripts.

branches: 1.1.4;
Imported envsys 2, a brief description of the new features:
(Part 4: documentation and configuration files)

* Support for detachable sensors.
* Cleaned up the API for simplicity and efficiency.
* Ability to send capacity/critical/warning events to powerd(8).
* Adapted all the code to the new locking order.
* Compatibility with the old envsys API: the ENVSYS_GTREINFO
and ENVSYS_GTREDATA ioctl(2)s are supported.
* Added support for a 'dictionary based communication channel' between
sysmon_power(9) and powerd(8), that means there is no 32 bytes event
size restriction anymore.
* Binary compatibility with old envstat(8) and powerd(8) via COMPAT_40.
* All drivers with the n^2 gtredata bug were fixed, PR kern/36226.

Tested by:

blymn: smsc(4).
bouyer: ipmi(4), mfi(4).
kefren: ug(4).
njoly: viaenv(4), adt7463.c.
riz: owtemp(4).
xtraeme: acpiacad(4), acpibat(4), acpitz(4), aiboost(4), it(4), lm(4).

Remove the stopping and starting of various network scripts on
sleep / resume.
This should no longer be needed now the various applications
(dhcpcd, ntpd, wpa_supplicant et all) are more aware to the network state
as all interface carriers should be brought down and up again.

Fixes PR misc/52397.

branches: 1.10.22;
restart dhcpcd if we get a "released" event from the vmt0 driver

- use -q to test for presence of a sysctl(7) variable silently
- modify powerd(8) sleep_button script so it can handle the soon-to-be
Xen suspend command.

provide a new 'bluetooth' rc.d script, to handle Bluetooth configuration
in a simpler manner. This replaces btattach, btconfig, bthcid, btdevctl
and sdpd scripts, and also should not require any configuration settings
other than "bluetooth=YES", though the full range of configurations is
still possible.

Use hw.acpi.sleep.state instead of machdep.sleep_state.

use '/etc/rc.d/apmd onestatus' rather than '/etc/rc.d/apmd status',
so we DTRT if apmd is set to NO in rc.conf

Stop and start bluetooth services across suspend.

If machdep.sleep_state is present, use it in favour of apm. Also stop and
start wpa_supplicant across suspend/resume just to be safe.

branches: 1.3.18; 1.3.20; 1.3.22;
Add useful example scripts for powerd acadapter, lid_switch, and
sleep_button events. These use the /dev/apm interface, so should be useful
on more than just i386.

Oops, fix comments.

Add dummy scripts for these events.