| History log of /src/etc/rc.d/raidframe |
| Revision | | Date | Author | Comments |
| 1.12 |
| 21-Jul-2022 |
kre | Make this better ... Allow config file for raidN to be found
in /etc/conf/raid/raidN (as well as in /etc/raidN.conf) (less
clutter in /etc).
Allow config files to exist for raids that are autoconfigured (just
skip anything autoconfigured) - this allows a (simplistic) recovery
mechanism if autoconf fails, and makes it simpler to enable/disable
autoconf at will, while keeping the raid working.
While here, add sh quoting where it is needed, and remove it from
where it is pointless.
|
| 1.11 |
| 03-Aug-2021 |
mlelstv | Reverse devpubd dependeny to avoid dangling reference to zfs which is
an optional part of the build.
|
| 1.10 |
| 21-Apr-2009 |
joerg | Split fsck during boot into two phases. Check the root file system
first, mount root and run the various disk providers. Add swap and
check the remaining file systems after that.
This breaks the dependency cycle for lvm, which needs writeable /dev.
Depend on rndctl in cgd.
|
| 1.9 |
| 13-Aug-2004 |
mycroft | branches: 1.9.36;
Add an _rc_subr_loaded variable, set to ":" by rc.subr. Scripts can use this
for a speedup by doing:
$_rc_subr_loaded . /etc/rc.subr
|
| 1.8 |
| 10-Sep-2003 |
wiz | Add a knob to turn off automatic configuration (via rc.d) of
non-auto-configured (via kernel) raid devices. oster says ok.
|
| 1.7 |
| 03-Sep-2002 |
abs | Split raidframe parity checking/rebuild out into raidframeparity, which is
called after quota so we don't end up with fsck and raidframe parity rebuild
taking forever after a crash/reboot.
While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not
raid[0-9].conf & raid[0-9][0-9].conf
|
| 1.6 |
| 27-Jan-2002 |
lukem | branches: 1.6.2;
use the recently added hw.disknames value from sysctl(8) to determine
the list of currently configured disk devices, and start raid parity
rebuilds on devices which match "raid[0-9]*"
|
| 1.5 |
| 17-Nov-2000 |
lukem | start all raid[0-9].conf and raid[0-9][0-9].conf, not just raid[0-3].conf.
do in order, so that raidN.conf is started before raidNN.conf.
|
| 1.4 |
| 16-May-2000 |
oster | At boot, initiate parity/mirror reconstruction as required.
This operation is backgrounded, and sequentially ordered.
|
| 1.3 |
| 13-May-2000 |
lukem | Use load_rc_config() (from rc.subr) instead of sourcing /etc/rc.conf.
This allows us or a user to change the configuration file method in
one place - rc.subr - without having to edit all of the rc.d/* files.
|
| 1.2 |
| 26-Apr-2000 |
thorpej | Make ccd and raidframe provide `disks', and make swap1 and fsck
depend on `disks', rather than `ccd' and `raidframe'.
|
| 1.1 |
| 10-Mar-2000 |
lukem | branches: 1.1.1;
Initial revision
|
| 1.1.1.1 |
| 10-Mar-2000 |
lukem | rc.d scripts derived from /etc/rc
|
| 1.6.2.1 |
| 30-Nov-2002 |
he | Pull up revision 1.7 (requested by abs in ticket #772):
Split raidframe parity checking/rebuilding out into
raidframeparity, which is called after quota, so we don't
end up with fsck and raidframe parity rebuild taking forever
after a crash/reboot.
While here, check for raid[0-9].conf and raid[1-9][0-9].conf
and not raid[0-9].conf and raid[0-9][0-9].conf
|
| 1.9.36.1 |
| 13-May-2009 |
jym | Sync with HEAD.
Third (and last) commit. See http://mail-index.netbsd.org/source-changes/2009/05/13/msg221222.html
|
