| History log of /src/sbin/devpubd |
| Revision | Date | Author | Comments |
| 1.5 | 15-Feb-2015 |
christos | let's make this compile again.
|
| 1.4 | 11-Aug-2013 |
dholland | branches: 1.4.4;
These pass WARNS=5, so don't set WARNS=4
|
| 1.3 | 11-Jan-2013 |
mlelstv | Provide a script for devpubd(8) that creates symlinks for each dk(4)
device under /dev/wedges so that you can access them by name.
|
| 1.2 | 06-Sep-2011 |
riz | branches: 1.2.2; 1.2.8;
Build and install the skeleton manpage for devpubd - it's better than
nothing.
|
| 1.1 | 29-Aug-2011 |
mrg | add the device publish daemon, written by jmcneill@.
listens on drvctl for new devices and invokes MAKEDEV for them.
missing:
- manual page
- rc.d script
- more testing
but it works well enough to make new disk nodes appear in /dev when
netbsd sees them and they're missing. you will need to make sure
you have a new /dev/MAKEDEV for this to work properly (postinstall
should handle this normally, of course.)
thanks jared!
|
| 1.2.8.2 | 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.2.8.1 | 25-Feb-2013 |
tls | resync with head
|
| 1.2.2.2 | 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.2.2.1 | 23-Jan-2013 |
yamt | sync with head
|
| 1.4.4.1 | 17-Feb-2015 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #525):
sbin/devpubd/hooks/01-makedev: revision 1.2
sbin/devpubd/devpubd-run-hooks.in: revision 1.3
sbin/devpubd/Makefile: revision 1.5
sbin/devpubd/hooks/02-wedgenames: revision 1.2
sbin/devpubd/devpubd.c: revision 1.3
sbin/devpubd/devpubd.c: revision 1.4
At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
let's make this compile again.
|
| 1.4 | 05-Aug-2021 |
kre | Expunge bogus (implementation defined / unspecified) uses of $@ in
scripts. $@ is unspecified except when used in a place where
field splitting can occur (which is never in an assignment),
X=$@ (with or without double quotes) is simply wrong.
Use $* instead of $@ in such places, or as here, simply change
the way things are done (very very slightly) and DTRT.
|
| 1.3 | 15-Feb-2015 |
jmcneill | At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
|
| 1.2 | 04-Dec-2011 |
jmcneill | branches: 1.2.18;
exit 0 on success
|
| 1.1 | 29-Aug-2011 |
mrg | branches: 1.1.2;
add the device publish daemon, written by jmcneill@.
listens on drvctl for new devices and invokes MAKEDEV for them.
missing:
- manual page
- rc.d script
- more testing
but it works well enough to make new disk nodes appear in /dev when
netbsd sees them and they're missing. you will need to make sure
you have a new /dev/MAKEDEV for this to work properly (postinstall
should handle this normally, of course.)
thanks jared!
|
| 1.1.2.1 | 17-Apr-2012 |
yamt | sync with head
|
| 1.2.18.1 | 17-Feb-2015 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #525):
sbin/devpubd/hooks/01-makedev: revision 1.2
sbin/devpubd/devpubd-run-hooks.in: revision 1.3
sbin/devpubd/Makefile: revision 1.5
sbin/devpubd/hooks/02-wedgenames: revision 1.2
sbin/devpubd/devpubd.c: revision 1.3
sbin/devpubd/devpubd.c: revision 1.4
At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
let's make this compile again.
|
| 1.7 | 24-Feb-2020 |
wiz | New sentence, new line. Bump date for previous.
|
| 1.6 | 24-Feb-2020 |
mlelstv | Add one-shot mode.
|
| 1.5 | 11-Sep-2016 |
sevan | branches: 1.5.14;
Document the version devpubd first appeared.
Bump date.
|
| 1.4 | 12-Jan-2013 |
wiz | Bump date for previous.
|
| 1.3 | 11-Jan-2013 |
mlelstv | Provide a script for devpubd(8) that creates symlinks for each dk(4)
device under /dev/wedges so that you can access them by name.
|
| 1.2 | 22-Nov-2012 |
reed | Add some details about the hook scripts.
|
| 1.1 | 29-Aug-2011 |
wiz | branches: 1.1.2; 1.1.8;
Add minimal devpubd man page, not hooked into the build yet.
XXX: someone should write drvctl(4)
|
| 1.1.8.1 | 25-Feb-2013 |
tls | resync with head
|
| 1.1.2.2 | 23-Jan-2013 |
yamt | sync with head
|
| 1.1.2.1 | 16-Jan-2013 |
yamt | sync with (a bit old) head
|
| 1.5.14.1 | 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.7 | 21-Jun-2021 |
christos | fix proplib deprecation
|
| 1.6 | 24-Feb-2020 |
mlelstv | Add one-shot mode.
|
| 1.5 | 06-Feb-2020 |
kamil | Stop including unused header <sys/poll.h>
|
| 1.4 | 15-Feb-2015 |
christos | branches: 1.4.16;
let's make this compile again.
|
| 1.3 | 15-Feb-2015 |
jmcneill | At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
|
| 1.2 | 16-Sep-2011 |
joerg | branches: 1.2.20;
Use __dead. Save a pointer.
|
| 1.1 | 29-Aug-2011 |
mrg | add the device publish daemon, written by jmcneill@.
listens on drvctl for new devices and invokes MAKEDEV for them.
missing:
- manual page
- rc.d script
- more testing
but it works well enough to make new disk nodes appear in /dev when
netbsd sees them and they're missing. you will need to make sure
you have a new /dev/MAKEDEV for this to work properly (postinstall
should handle this normally, of course.)
thanks jared!
|
| 1.2.20.1 | 17-Feb-2015 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #525):
sbin/devpubd/hooks/01-makedev: revision 1.2
sbin/devpubd/devpubd-run-hooks.in: revision 1.3
sbin/devpubd/Makefile: revision 1.5
sbin/devpubd/hooks/02-wedgenames: revision 1.2
sbin/devpubd/devpubd.c: revision 1.3
sbin/devpubd/devpubd.c: revision 1.4
At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
let's make this compile again.
|
| 1.4.16.1 | 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.3 | 05-Aug-2021 |
kre | Expunge bogus (implementation defined / unspecified) uses of $@ in
scripts. $@ is unspecified except when used in a place where
field splitting can occur (which is never in an assignment),
X=$@ (with or without double quotes) is simply wrong.
Use $* instead of $@ in such places, or as here, simply change
the way things are done (very very slightly) and DTRT.
|
| 1.2 | 15-Feb-2015 |
jmcneill | At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
|
| 1.1 | 29-Aug-2011 |
mrg | branches: 1.1.20;
add the device publish daemon, written by jmcneill@.
listens on drvctl for new devices and invokes MAKEDEV for them.
missing:
- manual page
- rc.d script
- more testing
but it works well enough to make new disk nodes appear in /dev when
netbsd sees them and they're missing. you will need to make sure
you have a new /dev/MAKEDEV for this to work properly (postinstall
should handle this normally, of course.)
thanks jared!
|
| 1.1.20.1 | 17-Feb-2015 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #525):
sbin/devpubd/hooks/01-makedev: revision 1.2
sbin/devpubd/devpubd-run-hooks.in: revision 1.3
sbin/devpubd/Makefile: revision 1.5
sbin/devpubd/hooks/02-wedgenames: revision 1.2
sbin/devpubd/devpubd.c: revision 1.3
sbin/devpubd/devpubd.c: revision 1.4
At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
let's make this compile again.
|
| 1.8 | 08-Aug-2021 |
martin | Fix obvious editor mishap in previous
|
| 1.7 | 05-Aug-2021 |
kre | Obliterate bogus $@ usage.
While here, fix some quoting, change some style, and attempt
to properly handle wedge names with embedded newlines, and those
that end with a '/' character (not particularly happy with the
solution to that last one, but it is better than it was).
Is there a reason that characters that need encoding in wedge names
(white space, and more) are encoded as %%XX (XX is the hex value of
the char - but 2 % chars? Why?). That remains unchanged, but as
the script already relied upon sh's $'...' quoting, I think we can rely
upon printf as well, so replace the old (very elegant, but slow) encoding
function with a much simpler one (does the same thing).
|
| 1.6 | 09-Jan-2021 |
mlelstv | Also replace calls to dirname.
|
| 1.5 | 09-Jan-2021 |
mlelstv | Remove need for awk/sed/readlink tools.
|
| 1.4 | 15-Aug-2016 |
mlelstv | Avoid error message when /dev/wedges doesn't exist yet.
|
| 1.3 | 01-Mar-2015 |
mlelstv | safely update existing wedge links
|
| 1.2 | 15-Feb-2015 |
jmcneill | At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
|
| 1.1 | 11-Jan-2013 |
mlelstv | branches: 1.1.2; 1.1.6; 1.1.12;
Provide a script for devpubd(8) that creates symlinks for each dk(4)
device under /dev/wedges so that you can access them by name.
|
| 1.1.12.2 | 07-Mar-2015 |
snj | Pull up following revision(s) (requested by mlelstv in ticket #561):
sbin/devpubd/hooks/02-wedgenames: revision 1.3
safely update existing wedge links
|
| 1.1.12.1 | 17-Feb-2015 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #525):
sbin/devpubd/hooks/01-makedev: revision 1.2
sbin/devpubd/devpubd-run-hooks.in: revision 1.3
sbin/devpubd/Makefile: revision 1.5
sbin/devpubd/hooks/02-wedgenames: revision 1.2
sbin/devpubd/devpubd.c: revision 1.3
sbin/devpubd/devpubd.c: revision 1.4
At startup, instead of doing run-hooks for each device, call run-hooks
once with a list of all found devices. This lets us batch calls to MAKEDEV
which results in a noticeable improvement in Raspberry Pi boot time.
Run the initial device enumeration hooks before detaching from the foreground,
ensuring that any required devices have been created before the rc.d script
exits.
let's make this compile again.
|
| 1.1.6.2 | 25-Feb-2013 |
tls | resync with head
|
| 1.1.6.1 | 11-Jan-2013 |
tls | file 02-wedgenames was added on branch tls-maxphys on 2013-02-25 00:28:04 +0000
|
| 1.1.2.2 | 23-Jan-2013 |
yamt | sync with head
|
| 1.1.2.1 | 11-Jan-2013 |
yamt | file 02-wedgenames was added on branch yamt-pagecache on 2013-01-23 00:05:28 +0000
|
