vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

-march=armv3m option is obsolete. remove it from commented kernel
configurations (we haven't supported those machines lately anyway),
and, for GCC >= 9, from the one caller.

PMAP_DEBUG has been deleted on arm

branches: 1.84.4;
Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.83.6;
bump size

bump ramdisk sizes by 100kb for GCC 7 bloaty.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.80.2;
Revert changes that pinned-down i2c parent specs. The i2c subsystem
has been enhanced to make this unnecessary.

Fully specifiy the location of indirectly-configured I2C devices. In
particular, the parent spec must not be wild-carded, as doing so doesn't
work well on systems where more than one I2C bus is present.

branches: 1.78.2;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 1.

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.73.2;
Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove KMEMSTATS.

branches: 1.71.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

G/C PFIL_HOOKS from the kernel configs.

branches: 1.69.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Remove "#options ARMFPE"

branches: 1.63.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.61.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.60.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.58.2; 1.58.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.56.2; 1.56.4;
Bump the ramdisk size so that the contents fits again.
OK'ed by reinoud@

Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove number parameters from pseudo-device loop and ipfilter.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.52.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.49.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.48.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.47.6; 1.47.8; 1.47.10; 1.47.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.46.24; 1.46.28; 1.46.30; 1.46.36; 1.46.44;
The sec(4) and ei(4) drivers appear to work on acorn32. Use them in preference
to the MD asc(4) and ie(4) drivers.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

branches: 1.44.2; 1.44.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Now that boot32 can pass in a useful frame rate, it's reasonable to use the
standard video mode list in our example kernels, rather that a somewhat
random subset. So do that.

Finally remove the old, pre-wscons, acorn32 console code. This dated back
to RiscBSD and had been lurking in dark corners scaring people (mostly me)
for far too long. It will be missed, but not much, and I hope we can clear
up any fallout before 5.0.

While I'm in the area, also remove rpckbd(4), since pckbd(4) has
been supported on acorn32 for ages.

s/adpater/adapter/

Prompted by PR/34195

Xarm32VIDC has supported pckbd(4) for several releases now, so it's probably
safe to stop using rpckbd(4) in wscons configurations.

branches: 1.39.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.37.2; 1.37.4; 1.37.6;
Remove the tablet line discipline.

Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

Add (commented out) IPSEC_NAT_T option.

branches: 1.31.4; 1.31.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.27.2;
Add IPv6 support like all other architectures do and add NetBSD 2.0
binary compatibility

Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Remove duplicate vidcvideo0 and wsdisplay lines

branches: 1.22.2;
Rename wsqms(4) to qms(4), since the "ws" is redundant now. While I'm here,
bundle it all into a single file, qms.c, replacing wsqms.c, wsqms_iomd.c,
and wsqmsvar.h.

Remove all use of busmouse(4), instead using wsmouse everywhere, even in
kernels that don't use wscons otherwise. The X server released with 1.6
should be able to cope with this.

Uppercase CPU, plural is CPUs.

Remove the "beep" driver. Its function is largely subsumed by a
combination of audio(4), wskbd(4) and audiobell(). Proposed a week
ago on port-acorn32 with no reaction whatever.

Remove sysbeep device.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus

New generic I2C framework. Supports bit-bang and "intelligent" I2C
interface controllers (of varying intelligence levels).

Contributed by Wasabi Systems, Inc. Primarily written by Steve Woodford,
with some modification by me.

Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing
SA_SIGINFO work.

branches: 1.13.8;
enable USERCONF by default; it's small and extremely useful to have available.

Enable csc(4), since it seems to be working now.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.10.2; 1.10.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Remove "options RISCPC"; nothing tests for it anymore.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Remove the in practice unused font stuff to save space

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

branches: 1.4.2;
The COMPAT_OLD_BOOTLOADER flag can go now since BtRiscBSD is no longer
suported due to ELF transition.

branches: 1.3.2;
Update and clean the config files to look more equal ... some non standard
configutations were not updated during time.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Cleanup kernel configuration file and add a generic INSTALL kernel. The
A7000 kernels are obsolete now the ARM7500 detection is integrated. The
NC's however are not completely supported and should in the near future be
bootable with GENERIC/INSTALL too.