| History log of /src/sys/arch/amiga/dev/if_qn.c |
| Revision | | Date | Author | Comments |
| 1.53 |
| 17-Sep-2022 |
thorpej | Eliminate use of IFF_OACTIVE.
|
| 1.52 |
| 17-Sep-2022 |
thorpej | Make qn_softc::transmit_pending a bool. NFC.
|
| 1.51 |
| 17-Sep-2022 |
thorpej | Remove statically allocated qn_softc[] array. NFC, as it was not
referenced by anything.
|
| 1.50 |
| 05-Dec-2021 |
msaitoh | s/timout/timeout/
|
| 1.49 |
| 29-Jan-2020 |
thorpej | Adopt <net/if_stats.h>.
|
| 1.48 |
| 12-Nov-2019 |
msaitoh | branches: 1.48.2;
Add missing initialization of sc_dev.
|
| 1.47 |
| 05-Feb-2019 |
msaitoh | branches: 1.47.4;
Remove very old IFF_NOTRAILERS flag.
|
| 1.46 |
| 26-Jun-2018 |
msaitoh | branches: 1.46.2;
Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.
This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.
|
| 1.45 |
| 22-Jun-2018 |
msaitoh | It's not required to include net/bpfdesc.h. Remove it.
|
| 1.44 |
| 22-Feb-2017 |
nonaka | branches: 1.44.6; 1.44.12;
Apply deferred if_start to more MD drivers.
|
| 1.43 |
| 15-Dec-2016 |
ozaki-r | branches: 1.43.2;
Move bpf_mtap and if_ipackets++ on Rx of each driver to percpuq if_input
The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
- Where/When if_ipackets is counted up
- Note that some drivers still update packet statistics in their own
way (periodical update)
- Moved bpf_mtap run in softint
- This makes it easy to MP-ify bpf
Proposed on tech-kern and tech-net
|
| 1.42 |
| 10-Jun-2016 |
ozaki-r | branches: 1.42.2;
Introduce m_set_rcvif and m_reset_rcvif
The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.
No functional change.
|
| 1.41 |
| 09-Feb-2016 |
ozaki-r | Introduce softint-based if_input
This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.
This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.
To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.
Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html
Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!
|
| 1.40 |
| 20-May-2015 |
ozaki-r | Remove leftover use of AF_NS and NS option
Unnecessary NETISR_NS is also removed.
|
| 1.39 |
| 27-Oct-2012 |
chs | branches: 1.39.14;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.
|
| 1.38 |
| 05-Apr-2010 |
joerg | branches: 1.38.8; 1.38.18;
Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.
|
| 1.37 |
| 19-Jan-2010 |
pooka | branches: 1.37.2; 1.37.4;
Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
|
| 1.36 |
| 18-Jan-2010 |
pooka | Fix bpf. compile-tested only.
|
| 1.35 |
| 26-Oct-2009 |
cegger | kill extra whitespaces
reviewed by tsutsui@
|
| 1.34 |
| 19-May-2009 |
phx | Removed old Amiga-specific "sicallback" software interrupts and replaced
them by MI softints. Approved by "is".
|
| 1.33 |
| 18-Mar-2009 |
cegger | bcopy -> memcpy
|
| 1.32 |
| 07-Nov-2008 |
dyoung | branches: 1.32.4;
*** Summary ***
When a link-layer address changes (e.g., ifconfig ex0 link
02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.
In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.
Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:
switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}
Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.
|
| 1.31 |
| 17-Oct-2007 |
garbled | branches: 1.31.16; 1.31.20; 1.31.26; 1.31.28;
Merge the ppcoea-renovation branch to HEAD.
This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.
TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.
NOTES:
pmppc was removed as an arch, and moved to a evbppc target.
|
| 1.30 |
| 03-Sep-2007 |
he | Rename function argument from command to cmd, to make the code
actually build after the previous change.
|
| 1.29 |
| 01-Sep-2007 |
dyoung | Change a bazillion occurrences of code resembling this,
error = (cmd == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->sc_ec) :
ether_delmulti(ifr, &sc->sc_ec);
if (error == ENETRESET) {
to this,
if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
which does the same thing.
(A bazillion is a very large number. This seems to make the i386
ALL kernel smaller by 3kB to 4kB.)
Use ifreq_getaddr() twice in es(4).
Whitespace nits.
|
| 1.28 |
| 26-Aug-2007 |
dyoung | branches: 1.28.2;
Constify.
|
| 1.27 |
| 05-Mar-2007 |
he | branches: 1.27.2; 1.27.10; 1.27.14; 1.27.18;
Cast to char* before doing pointer arithmetic.
|
| 1.26 |
| 04-Mar-2007 |
christos | Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.
|
| 1.25 |
| 10-May-2006 |
skrll | branches: 1.25.14;
Fix a bunch of cast lvalues.
|
| 1.24 |
| 02-Oct-2002 |
thorpej | branches: 1.24.22; 1.24.36; 1.24.38; 1.24.40; 1.24.42; 1.24.44;
Use CFATTACH_DECL().
|
| 1.23 |
| 27-Sep-2002 |
thorpej | Declare all cfattach structures const.
|
| 1.22 |
| 28-Jan-2002 |
aymeric | add __KERNEL_RCSID as suggested by Luke Mewburn
|
| 1.21 |
| 26-Jan-2002 |
aymeric | - ANSIfy
- remove some trailing spaces/tabs
- minor style nits
|
| 1.20 |
| 15-Nov-2000 |
thorpej | branches: 1.20.4; 1.20.8;
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
|
| 1.19 |
| 01-Oct-2000 |
thorpej | Move the check for "promisc + unicast + not for us" into ether_input(),
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
|
| 1.18 |
| 18-May-1999 |
thorpej | branches: 1.18.2;
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
|
| 1.17 |
| 25-Mar-1999 |
thorpej | branches: 1.17.4;
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
ourselves. Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
|
| 1.16 |
| 05-Jul-1998 |
jonathan | branches: 1.16.6;
defopt NS, NSIP.
|
| 1.15 |
| 05-Jul-1998 |
jonathan | defopt INET, NETATALK.
|
| 1.14 |
| 17-Apr-1998 |
veego | Add missing int after an register.
|
| 1.13 |
| 12-Jan-1998 |
thorpej | Adjust for changes to config.
|
| 1.12 |
| 17-Mar-1997 |
is | Make this compile again.
|
| 1.11 |
| 15-Mar-1997 |
is | New ARP system, supports IPv4 over any hardware link.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
|
| 1.10 |
| 23-Dec-1996 |
veego | branches: 1.10.6;
Get rid of __BROKEN_INDIRECT_CONFIG.
|
| 1.9 |
| 13-Oct-1996 |
christos | backout previous kprintf change
|
| 1.8 |
| 10-Oct-1996 |
christos | printf -> kprintf, sprintf -> ksprintf
|
| 1.7 |
| 18-Jun-1996 |
is | During the data type cleanup, a bug crept in in the code handling mbufs with
odd length. This would lead to corrupt data sent.
|
| 1.6 |
| 07-May-1996 |
thorpej | branches: 1.6.4;
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
|
| 1.5 |
| 21-Apr-1996 |
veego | - Cleanup for -Wall and -Wstrict-prototypes
- Added support for multiple floppy drives
- CyberVision64:
- has now a real console mode
- another bugfix for boards with the new S3 chip
- Ariadne:
- fixed crashes with aeput (mbuf failure)
|
| 1.4 |
| 17-Mar-1996 |
thorpej | New device attachment scheme:
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
|
| 1.3 |
| 24-Dec-1995 |
mycroft | The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
|
| 1.2 |
| 30-Nov-1995 |
jtc | merge in changes from 1.1 release branch
|
| 1.1 |
| 07-Oct-1995 |
chopps | branches: 1.1.2;
new quicknet ethernet driver from Kortelainen Mika <k125374@cs.tut.fi>
|
| 1.1.2.1 |
| 10-Nov-1995 |
chopps | update to if_qn from root@aivo.ton.tut.fi (Mika Kortelainen)
|
| 1.6.4.1 |
| 18-Jun-1996 |
is | Critical bug fix from the trunk:
During the recent data type cleanups, a bug crept in in the handling of
mbufs with odd length, leading to possible data corruption.
Fixes PR 2521 by Mika Kortelainen.
|
| 1.10.6.2 |
| 10-Mar-1997 |
is | netinet/if_ether.h => netinet/if_inarp.h
|
| 1.10.6.1 |
| 06-Mar-1997 |
is | Convert to new ARP style.
|
| 1.16.6.1 |
| 11-Dec-1998 |
kenh | The beginnings of interface detach support. Still some bugs, but mostly
works for me.
This work was originally by Bill Studenmund, and cleaned up by me.
|
| 1.17.4.1 |
| 21-Jun-1999 |
thorpej | Sync w/ -current.
|
| 1.18.2.2 |
| 22-Nov-2000 |
bouyer | Sync with HEAD.
|
| 1.18.2.1 |
| 20-Nov-2000 |
bouyer | Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.
I updated the amiga SCSI drivers, but completely untested yet (may not even
compile)
|
| 1.20.8.2 |
| 18-Oct-2002 |
nathanw | Catch up to -current.
|
| 1.20.8.1 |
| 28-Feb-2002 |
nathanw | Catch up to -current.
|
| 1.20.4.2 |
| 10-Oct-2002 |
jdolecek | sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work
|
| 1.20.4.1 |
| 11-Feb-2002 |
jdolecek | Sync w/ -current.
|
| 1.24.44.1 |
| 24-May-2006 |
tron | Merge 2006-05-24 NetBSD-current into the "peter-altq" branch.
|
| 1.24.42.1 |
| 11-May-2006 |
elad | sync with head
|
| 1.24.40.1 |
| 24-May-2006 |
yamt | sync with head.
|
| 1.24.38.1 |
| 01-Jun-2006 |
kardel | Sync with head.
|
| 1.24.36.1 |
| 09-Sep-2006 |
rpaulo | sync with head
|
| 1.24.22.2 |
| 03-Sep-2007 |
yamt | sync with head.
|
| 1.24.22.1 |
| 21-Jun-2006 |
yamt | sync with head.
|
| 1.25.14.1 |
| 12-Mar-2007 |
rmind | Sync with HEAD.
|
| 1.27.18.1 |
| 03-Sep-2007 |
jmcneill | Sync with HEAD.
|
| 1.27.14.2 |
| 10-Sep-2007 |
skrll | Sync with HEAD.
|
| 1.27.14.1 |
| 03-Sep-2007 |
skrll | Sync with HEAD.
|
| 1.27.10.1 |
| 03-Oct-2007 |
garbled | Sync with HEAD
|
| 1.27.2.1 |
| 09-Oct-2007 |
ad | Sync with head.
|
| 1.28.2.1 |
| 06-Nov-2007 |
matt | sync with HEAD
|
| 1.31.28.2 |
| 28-Apr-2009 |
skrll | Sync with HEAD.
|
| 1.31.28.1 |
| 19-Jan-2009 |
skrll | Sync with HEAD.
|
| 1.31.26.1 |
| 13-Dec-2008 |
haad | Update haad-dm branch to haad-dm-base2.
|
| 1.31.20.4 |
| 11-Aug-2010 |
yamt | sync with head.
|
| 1.31.20.3 |
| 11-Mar-2010 |
yamt | sync with head
|
| 1.31.20.2 |
| 20-Jun-2009 |
yamt | sync with head
|
| 1.31.20.1 |
| 04-May-2009 |
yamt | sync with head.
|
| 1.31.16.1 |
| 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.32.4.1 |
| 13-May-2009 |
jym | Sync with HEAD.
Commit is split, to avoid a "too many arguments" protocol error.
|
| 1.37.4.1 |
| 30-May-2010 |
rmind | sync with head
|
| 1.37.2.1 |
| 30-Apr-2010 |
uebayasi | Sync with HEAD.
|
| 1.38.18.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.38.18.1 |
| 20-Nov-2012 |
tls | Resync to 2012-11-19 00:00:00 UTC
|
| 1.38.8.1 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.39.14.5 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
| 1.39.14.4 |
| 05-Feb-2017 |
skrll | Sync with HEAD
|
| 1.39.14.3 |
| 09-Jul-2016 |
skrll | Sync with HEAD
|
| 1.39.14.2 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.39.14.1 |
| 06-Jun-2015 |
skrll | Sync with HEAD
|
| 1.42.2.2 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
| 1.42.2.1 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.43.2.1 |
| 21-Apr-2017 |
bouyer | Sync with HEAD
|
| 1.44.12.2 |
| 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.44.12.1 |
| 25-Jun-2018 |
pgoyette | Sync with HEAD
|
| 1.44.6.2 |
| 14-Nov-2019 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1439):
sys/dev/sbus/sio16.c: revision 1.25
sys/dev/gpib/mt.c: revision 1.33
sys/arch/mvme68k/dev/wdsc.c: revision 1.33
sys/dev/gpib/ct.c: revision 1.31
sys/dev/isa/mcd.c: revision 1.119
sys/dev/pci/if_stge.c: revision 1.73
sys/dev/gpib/ppi.c: revision 1.25
sys/dev/pcmcia/if_tr_pcmcia.c: revision 1.29
sys/arch/amiga/dev/zssc.c: revision 1.46
sys/arch/mac68k/obio/iwm_fd.c: revision 1.57
sys/arch/amiga/dev/if_qn.c: revision 1.48
sys/dev/isa/tcic2_isa.c: revision 1.28
sys/dev/isa/uha_isa.c: revision 1.42
sys/dev/pci/neo.c: revision 1.55
sys/arch/next68k/dev/nextdisplay.c: revision 1.22
sys/dev/isa/if_iy.c: revision 1.111
Add missing initialization of sc_dev.
Initialize sc_dev correctly to avoid null pointer dereference when
bus_space_map() failed.
Add missing initialization of sc_dev.
|
| 1.44.6.1 |
| 26-Jul-2018 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #938):
sys/arch/acorn32/podulebus/if_ie.c: revision 1.41
sys/arch/amiga/dev/if_es.c: revision 1.58
sys/arch/amiga/dev/if_qn.c: revision 1.45
sys/arch/arm/at91/at91emac.c: revision 1.20
sys/arch/arm/ep93xx/epe.c: revision 1.37
sys/arch/emips/ebus/if_le_ebus.c: revision 1.14
sys/arch/emips/ebus/if_le_ebus.c: revision 1.15
sys/arch/mac68k/dev/if_mc.c: revision 1.46
sys/arch/macppc/dev/am79c950.c: revision 1.39
sys/arch/newsmips/apbus/if_sn.c: revision 1.40
sys/arch/next68k/dev/mb8795.c: revision 1.59
sys/arch/playstation2/dev/if_smap.c: revision 1.25
sys/arch/playstation2/dev/if_smap.c: revision 1.26
sys/arch/sun2/dev/if_ec.c: revision 1.28
sys/arch/sun3/dev/if_ie.c: revision 1.63
sys/arch/x68k/dev/if_ne_intio.c: revision 1.19
sys/arch/xen/xen/if_xennet_xenbus.c: revision 1.75
sys/arch/xen/xen/xennetback_xenbus.c: revision 1.63
sys/dev/bi/if_ni.c: revision 1.45
sys/dev/cadence/if_cemac.c: revision 1.12
sys/dev/ic/am7990.c: revision 1.78
sys/dev/ic/am79900.c: revision 1.27
sys/dev/ic/an.c: revision 1.67
sys/dev/ic/cs89x0.c: revision 1.40
sys/dev/ic/dm9000.c: revision 1.13
sys/dev/ic/dm9000.c: revision 1.14
sys/dev/ic/dp8390.c: revision 1.88
sys/dev/ic/elink3.c: revision 1.141
sys/dev/ic/elinkxl.c: revision 1.122
sys/dev/ic/hme.c: revision 1.98
sys/dev/ic/i82586.c: revision 1.77
sys/dev/ic/lance.c: revision 1.53
sys/dev/ic/mb86950.c: revision 1.27
sys/dev/ic/mb86960.c: revision 1.86
sys/dev/ic/mtd803.c: revision 1.34
sys/dev/ic/pdq_ifsubr.c: revision 1.59
sys/dev/ic/rrunner.c: revision 1.86
sys/dev/ic/seeq8005.c: revision 1.58
sys/dev/ic/sgec.c: revision 1.47
sys/dev/ic/smc90cx6.c: revision 1.72
sys/dev/ic/smc91cxx.c: revision 1.96
sys/dev/ic/tropic.c: revision 1.49
sys/dev/ic/wi.c: revision 1.245
sys/dev/isa/if_eg.c: revision 1.93
sys/dev/isa/if_el.c: revision 1.95
sys/dev/isa/if_iy.c: revision 1.101
sys/dev/ofw/ofnet.c: revision 1.58
sys/dev/pci/if_alc.c: revision 1.27
sys/dev/pci/if_de.c: revision 1.152
sys/dev/pci/if_fpa.c: revision 1.61
sys/dev/pci/if_jme.c: revision 1.34
sys/dev/pci/if_tl.c: revision 1.108
sys/dev/pci/if_vte.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe.h: revision 1.50
sys/dev/pcmcia/if_cnw.c: revision 1.62
sys/dev/pcmcia/if_malo_pcmcia.c: revision 1.17
sys/dev/pcmcia/if_ray.c: revision 1.89
sys/dev/pcmcia/if_xi.c: revision 1.81
sys/dev/pcmcia/mhzc.c: revision 1.51
sys/dev/pcmcia/xirc.c: revision 1.34
sys/dev/qbus/if_de.c: revision 1.33
sys/dev/qbus/if_qe.c: revision 1.78
sys/dev/qbus/if_qt.c: revision 1.22
sys/dev/sbus/be.c: revision 1.87
sys/dev/sbus/qe.c: revision 1.68
sys/dev/scsipi/if_se.c: revision 1.96
sys/dev/usb/if_atu.c: revision 1.59
sys/net/if_l2tp.c: revision 1.28 via patch
sys/net/if_ppp.c: revision 1.160
It's not required to include net/bpfdesc.h. Remove it.
--
Simplify like other drivers. NULL check of ifp->if_bpf is done in
bpf_mtap(), so it's not required to do it here.
--
Remove duplicated inclusion of net/bpf.h.
--
Remove duplicated inclusion of net/bpf.h.
--
Simplify bpf_mtap() call. No functional change.
|
| 1.46.2.3 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.46.2.2 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.46.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.47.4.1 |
| 14-Nov-2019 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #425):
sys/dev/sbus/sio16.c: revision 1.25
sys/dev/gpib/mt.c: revision 1.33
sys/arch/mvme68k/dev/wdsc.c: revision 1.33
sys/dev/gpib/ct.c: revision 1.31
sys/dev/isa/mcd.c: revision 1.119
sys/dev/pci/if_stge.c: revision 1.73
sys/dev/gpib/ppi.c: revision 1.25
sys/dev/pcmcia/if_tr_pcmcia.c: revision 1.29
sys/arch/amiga/dev/zssc.c: revision 1.46
sys/arch/mac68k/obio/iwm_fd.c: revision 1.57
sys/arch/amiga/dev/if_qn.c: revision 1.48
sys/dev/isa/tcic2_isa.c: revision 1.28
sys/dev/isa/uha_isa.c: revision 1.42
sys/dev/pci/neo.c: revision 1.55
sys/arch/next68k/dev/nextdisplay.c: revision 1.22
sys/dev/isa/if_iy.c: revision 1.111
Add missing initialization of sc_dev.
Initialize sc_dev correctly to avoid null pointer dereference when
bus_space_map() failed.
Add missing initialization of sc_dev.
|
| 1.48.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
