| History log of /src/sys/arch/amiga/dev/wdc_amiga.c |
| Revision | | Date | Author | Comments |
| 1.41 |
| 20-Dec-2023 |
thorpej | Remove unnecessary <sys/malloc.h> include.
|
| 1.40 |
| 20-Oct-2017 |
jdolecek | move ata_queue_alloc(1) and ata_queue_free() calls to ata_channel_init()
and ata_channel_destroy() respectively, to make attachment code simpler,
and to make it easier to spot special queue manipulation like cmdide(4)
on topic of PR kern/52606
|
| 1.39 |
| 07-Oct-2017 |
jdolecek | Merge support for SATA NCQ (Native Command Queueing) from jdolecek-ncq branch
ATA subsystem was changed to support several outstanding commands, and use
NCQ xfers if supported by both the controller and the disk, including NCQ
error recovery. Set NCQ high priority for BPRIO_TIMECRITICAL xfers
if supported. Added FUA support.
Done some work towards MP-safe, all ATA code tsleep()/wakeup() replaced
by condvars, and switched most code from spl* to mutexes (separate
wd(4) and ata channel lock).
Introduced new option WD_CHAOS_MONKEY to facilitate testing of error
handling, fixed several uncovered issues. Also fixed several problems
with kernel dump to wd(4) disk.
Tested with ahcisata(4), mvsata(4), siisata(4), piixide(4) on amd64,
with and without port multiplier, both disk and ATAPI devices; other
drivers and archs mechanically adjusted and compile-tested. NCQ is
supported for ahcisata(4) and siisata(4) for any controller, for
mvsata(4) only Gen IIe ones for now. Also enabled ATAPI support in
mvsata(4).
Thanks to Matt Thomas for initial ATA infrastructure patch, and
Jonathan A.Kollasch for siisata(4) NCQ changes and general testing.
Also fixes PR kern/43169 (wd(4)); and PR kern/11811, PR kern/47041,
PR kern/51979 (kernel dump)
|
| 1.38 |
| 18-Apr-2015 |
mlelstv | branches: 1.38.6;
detect a4000 hardware only once, then use the result.
|
| 1.37 |
| 03-Jan-2014 |
rkujawa | branches: 1.37.6;
Rework handling of Commodore Gayle chip. Avoid ugly struct casts, introduce
proper bus_space accesses and some abstraction layer. All drivers that utilised
Gayle also had to be refactored.
I tried not to break anything more, but this clearly needs more testing...
|
| 1.36 |
| 31-Jul-2012 |
bouyer | branches: 1.36.2; 1.36.4;
Apply back changes that were reverted on Jul 24 and Jul 26 (general ata/wdc
cleanup and SATA PMP support), now that I'm back to fix the fallouts.
|
| 1.35 |
| 26-Jul-2012 |
jakllsch | Revert, with intention of restoring in a less invasive way, the SATA Port
Multiplier code.
ok christos@
|
| 1.34 |
| 02-Jul-2012 |
bouyer | Add sata Port MultiPlier (PMP) support to the ata bus layer,
as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()
propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).
Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed
|
| 1.33 |
| 19-Jul-2011 |
dyoung | branches: 1.33.2;
Change <machine/bus.h> to <sys/bus.h> throughout.
|
| 1.32 |
| 13-Jan-2011 |
phx | Recognize Amiga 600 model.
Patch submited by Radoslaw Kujawa.
|
| 1.31 |
| 28-Apr-2008 |
martin | branches: 1.31.22;
Remove clause 3 and 4 from TNF licenses
|
| 1.30 |
| 18-Mar-2008 |
cube | branches: 1.30.2; 1.30.4;
Split device_t and softc for ATA devices, as well as wd(4). Other
cosmetic changes where appropriate.
|
| 1.29 |
| 27-Mar-2006 |
aymeric | branches: 1.29.38; 1.29.58; 1.29.62;
as far as control registers are concerned, the A1200 behaves the same as the
A4000. This allows the use of ATAPI drives on the A1200.
Idesc can really rest in peace now.
|
| 1.28 |
| 29-Jan-2006 |
dsl | branches: 1.28.2; 1.28.4; 1.28.6; 1.28.8; 1.28.10;
Make almost everything #include <sys/bswap.h> instead of <machine/bswap.h>
The bswap.h and endian.h files are all rather incestuous, but I want to
get the constant folding stuff into one place - sys/bswap.h
|
| 1.27 |
| 16-Jan-2006 |
bouyer | properly use ata_channel->ch_ndrive:
- initialize it properly in the bus front-ends (all 2, exept in wdc_pcmcia.c
for the "Sandisk CompactFlash Card" where it's set to 1)
- remplace hardcoded '2' by ata_channel->ch_ndrive in MI IDE drivers.
From Christos Zoulas in kern/32501.
|
| 1.26 |
| 11-Dec-2005 |
christos | branches: 1.26.2;
merge ktrace-lwp.
|
| 1.25 |
| 13-Jun-2005 |
jmc | branches: 1.25.2;
Fix a ton of const/volatile issues shown with new warning flags
|
| 1.24 |
| 23-Aug-2004 |
jandberg | Call wdc_init_shadow_regs() after data structures are filled in.
Idea monkeyed from a commit by <mycroft>; reviewed by <aymeric>.
|
| 1.23 |
| 20-Aug-2004 |
thorpej | Move most of wdc_softc into a new atac_softc structure that contains
info common to all types of ATA controllers.
|
| 1.22 |
| 14-Aug-2004 |
thorpej | - Split the register handles out of struct wdc_channel into a separate
wdc_regs structure, and array of which (indexed per channel) is pointed
to by struct wdc_softc.
- Move the resulting wdc_channel structure to atavar.h and rename it to
ata_channel. Rename the corresponding flags.
- Add a "ch_ndrive" member to struct ata_channel, which indicates the
maximum number of drives that can be present on the channel. For now,
this is always 2. Add an ATA_MAXDRIVES constant that places an upper
limit on this value, also currently 2.
|
| 1.21 |
| 25-May-2004 |
thorpej | Add the notion of "shadow registers" to the wdc driver. These shadow
registers are registers that overlap with others on many controllers, but
which may actually be distinct on some controllers. Right now, the two
shadows are:
- wd_status (usually overlaps wd_command)
- wd_features (usually overlaps wd_error)
Add a new helper function, wdc_init_shadow_regs(), used to initialize
the shadow register handles on controllers where they do actually overlap.
Partially from Jordan Rhody @ Wasabi Systems, Inc.
|
| 1.20 |
| 06-Jan-2004 |
he | Make these compile again after the latest adjustments.
|
| 1.19 |
| 03-Jan-2004 |
thorpej | More wdc_channel structure member namespace cleanup:
- channel -> ch_channel
- wdc -> ch_wdc
|
| 1.18 |
| 03-Jan-2004 |
thorpej | Rename "struct channel_softc" to "struct wdc_channel".
|
| 1.17 |
| 01-Jan-2004 |
thorpej | Rename:
- wdc_xfer to ata_xfer
- channel_queue to ata_queue
and move them to <dev/ata/atavar.h> so they can be used by non-wdc ATA
controllers. Clean up the member names of these structures while at it.
|
| 1.16 |
| 31-Dec-2003 |
thorpej | Simplify allocation of the channel queue.
|
| 1.15 |
| 07-Dec-2003 |
is | 2nd half of new wdc register mapping
|
| 1.14 |
| 07-Dec-2003 |
is | adapt to the new world of wdc register mappings
|
| 1.13 |
| 08-Oct-2003 |
bouyer | Adapt for wdcattach() prototype change.
|
| 1.12 |
| 25-Sep-2003 |
mycroft | Hide the use of config_interrupts() in one place.
|
| 1.11 |
| 19-Sep-2003 |
mycroft | 1) Use config_interrupts() to attach IDE and ATAPI drives. This eliminates
most polling.
2) Clean up some goofiness in pciide -- get rid of the whole "candisable" path
(it's gratuitous) and simplify the code by calling pciide_map_compat_intr(),
*_set_modes() and wdc_print_modes() from central locations.
3) Add a register writability and register ghost test to eliminate phantom
drives more quickly.
|
| 1.10 |
| 02-Oct-2002 |
thorpej | branches: 1.10.6;
Use CFATTACH_DECL().
|
| 1.9 |
| 27-Sep-2002 |
thorpej | Declare all cfattach structures const.
|
| 1.8 |
| 28-Jan-2002 |
aymeric | add __KERNEL_RCSID as suggested by Luke Mewburn
|
| 1.7 |
| 26-Jan-2002 |
aymeric | - ANSIfy
- remove some trailing spaces/tabs
- minor style nits
|
| 1.6 |
| 07-Apr-2001 |
tron | branches: 1.6.2; 1.6.8;
Don't call "is_a1200()" again after its result was stored in the "softc"
structure.
|
| 1.5 |
| 21-Feb-2000 |
aymeric | branches: 1.5.6; 1.5.8;
fix a couple of things to handle interrupts more cleanly on the A1200
|
| 1.4 |
| 19-Feb-2000 |
aymeric | acknowledge the interrupt to gayle before entering wdc_intr.
This fixes the lost interrupts problem.
fix some glitches on the A1200 too.
|
| 1.3 |
| 10-Feb-2000 |
aymeric | fix interrupt handling
I still get lost interrupts on the A1200, but the problem is certainly
elsewhere (not in wdc_amiga).
|
| 1.2 |
| 09-Feb-2000 |
aymeric | fix a couple of things to (hopefully) make this work on the A1200
|
| 1.1 |
| 05-Feb-2000 |
mhitch | At long last, the MI wdc glue for the Amiga. Tested on my A4000, but not
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
|
| 1.5.8.1 |
| 09-Apr-2001 |
nathanw | Catch up with -current.
|
| 1.5.6.3 |
| 21-Apr-2001 |
bouyer | Sync with HEAD
|
| 1.5.6.2 |
| 20-Nov-2000 |
bouyer | Update thorpej_scsipi to -current as of a month ago
A i386 GENERIC kernel compiles without the siop, ahc and bha drivers
(will be updated later). i386 IDE/ATAPI and ncr work, as well as
sparc/esp_sbus. alpha should work as well (untested yet).
siop, ahc and bha will be updated once I've updated the branch to current
-current, as well as machine-dependant code.
I updated the amiga SCSI drivers, but completely untested yet (may not even
compile)
|
| 1.5.6.1 |
| 21-Feb-2000 |
bouyer | file wdc_amiga.c was added on branch thorpej_scsipi on 2000-11-20 19:58:44 +0000
|
| 1.6.8.3 |
| 18-Oct-2002 |
nathanw | Catch up to -current.
|
| 1.6.8.2 |
| 28-Feb-2002 |
nathanw | Catch up to -current.
|
| 1.6.8.1 |
| 07-Apr-2001 |
nathanw | file wdc_amiga.c was added on branch nathanw_sa on 2002-02-28 04:07:02 +0000
|
| 1.6.2.2 |
| 10-Oct-2002 |
jdolecek | sync kqueue with -current; this includes merge of gehenna-devsw branch,
merge of i386 MP branch, and part of autoconf rototil work
|
| 1.6.2.1 |
| 11-Feb-2002 |
jdolecek | Sync w/ -current.
|
| 1.10.6.5 |
| 10-Nov-2005 |
skrll | Sync with HEAD. Here we go again...
|
| 1.10.6.4 |
| 21-Sep-2004 |
skrll | Fix the sync with head I botched.
|
| 1.10.6.3 |
| 18-Sep-2004 |
skrll | Sync with HEAD.
|
| 1.10.6.2 |
| 25-Aug-2004 |
skrll | Sync with HEAD.
|
| 1.10.6.1 |
| 03-Aug-2004 |
skrll | Sync with HEAD
|
| 1.25.2.2 |
| 24-Mar-2008 |
yamt | sync with head.
|
| 1.25.2.1 |
| 21-Jun-2006 |
yamt | sync with head.
|
| 1.26.2.1 |
| 01-Feb-2006 |
yamt | sync with head.
|
| 1.28.10.1 |
| 28-Mar-2006 |
tron | Merge 2006-03-28 NetBSD-current into the "peter-altq" branch.
|
| 1.28.8.1 |
| 19-Apr-2006 |
elad | sync with head - hopefully this will work
|
| 1.28.6.1 |
| 01-Apr-2006 |
yamt | sync with head.
|
| 1.28.4.1 |
| 22-Apr-2006 |
simonb | Sync with head.
|
| 1.28.2.1 |
| 09-Sep-2006 |
rpaulo | sync with head
|
| 1.29.62.2 |
| 02-Jun-2008 |
mjf | Sync with HEAD.
|
| 1.29.62.1 |
| 03-Apr-2008 |
mjf | Sync with HEAD.
|
| 1.29.58.1 |
| 24-Mar-2008 |
keiichi | sync with head.
|
| 1.29.38.1 |
| 23-Mar-2008 |
matt | sync with HEAD
|
| 1.30.4.1 |
| 16-May-2008 |
yamt | sync with head.
|
| 1.30.2.1 |
| 18-May-2008 |
yamt | sync with head.
|
| 1.31.22.1 |
| 05-Mar-2011 |
rmind | sync with head
|
| 1.33.2.2 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.33.2.1 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.36.4.1 |
| 18-May-2014 |
rmind | sync with head
|
| 1.36.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.36.2.1 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.37.6.1 |
| 06-Jun-2015 |
skrll | Sync with HEAD
|
| 1.38.6.2 |
| 27-Sep-2017 |
jdolecek | change wdc_init_shadow_regs() to accept only struct wdc_regs, it doesn't
touch anything else
factor out the probe-only struct ata_channel initialization to wdcprobe(), to
reduce duplication of logic in individual drivers, and to actually work now
that more init is needed beyond the memset()
|
| 1.38.6.1 |
| 26-Sep-2017 |
jdolecek | switch to ata_queue_alloc() so that this at least compiles
|
