PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

s/littel/little/ mainly in copy pasted comments.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.40.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.34.2; 1.34.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.29.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

Add mntva

branches: 1.25.2;
Remove KMEMSTATS.

branches: 1.24.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.20.4;
fix manual section numbering of sysctl.
thanks wiz@

G/C PFIL_HOOKS from the kernel configs.

branches: 1.18.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.12.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.9.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.8.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.6.2; 1.6.4;
Include new bppcsc(4) driver from amiga.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.3.2; 1.3.4;
Enable all devices which can be compiled.
(Tested, or even working, are only few of them.)

Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

branches: 1.1.2;
Some improvements based on the work of Adam Ciarcinski.
Adapted everything to integrate with current 5.99 source.
Added an Amiga PIC for interrupt handling.

Status:
A CSPPC machine probably boots into single user, but only few devices
will attach without problems (e.g. keyboard, serial, parallel, floppy disk,
the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE.
BPPC support is prepared, but unfinished and untested (I don't own a BPPC).

A problem which has to be solved is interrupt acknowledging, which may happen
twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC
specific pic_amiga.c.

new world order

Add the %MAKEOPTIONSAPPEND token at the end of the file, after the
common Makefile.kern.inc has been included.

branches: 1.10.4;
Bring some stuff up-to-date. To be continued.

branches: 1.9.2;
interrupt with two rs.

Roll the rest of the ports over to the new MI kernel build machinery.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.

catch up with "recent" new egcs check

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

Change defaults for kernel compiles. Default all to USETOOLS?=no and have
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.

Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.

branches: 1.4.2;
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.

branches: 1.3.2;
define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.

branches: 1.2.2;
delete obsolete comment

branches: 1.1.6;
Initial AmigaPPC commit.

Lots of the work was done by Adam Ciarcinsky.

Currently, this only supports CyberPPC boards by Phase 5. Blizzard PPC
expected later.

The kernel is useless but for demonstrating that it starts... especially
interupts, and most of MMU support, is not in yet. Builtin console works,
however, and you can look at the kernel startup messages.

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

s/littel/little/ mainly in copy pasted comments.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.59.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

Use veriexec.config to reduce duplication

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.54.2; 1.54.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.49.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.46.2;
Remove KMEMSTATS.

branches: 1.45.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

fix manual section numbering of sysctl.
thanks wiz@

G/C PFIL_HOOKS from the kernel configs.

branches: 1.41.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.35.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.32.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.31.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.29.2; 1.29.4;
Include new bppcsc(4) driver from amiga.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.27.2; 1.27.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Some improvements based on the work of Adam Ciarcinski.
Adapted everything to integrate with current 5.99 source.
Added an Amiga PIC for interrupt handling.

Status:
A CSPPC machine probably boots into single user, but only few devices
will attach without problems (e.g. keyboard, serial, parallel, floppy disk,
the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE.
BPPC support is prepared, but unfinished and untested (I don't own a BPPC).

A problem which has to be solved is interrupt acknowledging, which may happen
twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC
specific pic_amiga.c.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.24.56; 1.24.60; 1.24.66; 1.24.68;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.23.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.21.2; 1.21.4; 1.21.6;
Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

branches: 1.19.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

branches: 1.17.2;
Don't be confused with trigraphs.
EXEC_ELF -> EXEC_ELF32

branches: 1.16.4;
Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

PPC_OEA is in std.amigappc

branches: 1.13.2;
Bye Bye UCONSOLE

Rename PPC_MPC6XX to PPC_OEA (and any mpc6xx reference to oea).

enable USERCONF by default; it's small and extremely useful to have available.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

normalize INSECURE and SCSIVERBOSE descriptions

add options PPC_MPC6XX to pull in generic powerpc support

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.4.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Fix various misspellings of compatible/compatibility.

branches: 1.2.2; 1.2.4;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Initial AmigaPPC commit.

Lots of the work was done by Adam Ciarcinsky.

Currently, this only supports CyberPPC boards by Phase 5. Blizzard PPC
expected later.

The kernel is useless but for demonstrating that it starts... especially
interupts, and most of MMU support, is not in yet. Builtin console works,
however, and you can look at the kernel startup messages.

s/contrller/controller/ in comment.

Merge isaki-audio2 branch, the overhaul of audio subsystem.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly. Improve halfduplex support.
- Many bugs are fixed including deadlocks, resource leaks, abuses, etc.
- Simplify audio filter mechanism. The encoding/channels/frequency
conversions are completely handled in the upper layer. So the hard-
ware driver only converts its hardware encoding (if necessary).
- audio_hw_if changes:
- Obsoletes query_encoding and add query_format instead.
- Obsoletes set_params and add set_format instead.
- Remove drain, setfd, mappage.
- The call sequences are changed.
- ioctl AUDIO_GETFD/SETFD, AUDIO_GETCHAN/SETCHAN are obsoleted.
- ioctl AUDIO_{QUERY,GET,SET}FORMAT are introduced.
- cleanup config attributes: au*conv and mulaw.
- All hardware drivers should follow it (I've done as much as possible).

Some file paths are changed:
- dev/audio.c -> dev/audio/audio.c (rewritten)
- dev/audiovar.h -> dev/audio/audiovar.h
- dev/audio_dai.h -> dev/audio/audio_dai.h
- dev/audio_if.h -> dev/audio/audio_if.h
- dev/audiobell.c -> dev/audio/audiobell.c
- dev/audiobellvar.h -> dev/audio/audiobellvar.h
- dev/mulaw.[ch] -> dev/audio/mulaw.[ch] + dev/audio/alaw.c

branches: 1.30.2;
Remove isic(4). It is part of ISDN, which we are now retiring.

branches: 1.29.14; 1.29.16;
Add mntva

branches: 1.28.6; 1.28.10;
make code compile again; need stride 0x1000 for gayle

branches: 1.27.2;
Add z3rambd to files.amigappc, hopefully this will fix amigppc build.

Fix fallout from recent ed driver replacement. Makes amigappc build again.

branches: 1.25.2; 1.25.6;
Port amiga calls config_console() from machdep.c now, so we have to do
the same. Otherwise no console is configured anymore.
While being at it adapt files.amigappc to the latest changes in files.amiga.
Ok by releng@.

branches: 1.24.8; 1.24.12;
Include new bppcsc(4) driver from amiga.

Include new IOBZCLOCK option to make amiga/dev/ioblix_zbus.c compile again.

branches: 1.22.2; 1.22.4;
IOBlix files were missing.

Include majors.amigappc instead of majors.amiga.

Some improvements based on the work of Adam Ciarcinski.
Adapted everything to integrate with current 5.99 source.
Added an Amiga PIC for interrupt handling.

Status:
A CSPPC machine probably boots into single user, but only few devices
will attach without problems (e.g. keyboard, serial, parallel, floppy disk,
the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE.
BPPC support is prepared, but unfinished and untested (I don't own a BPPC).

A problem which has to be solved is interrupt acknowledging, which may happen
twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC
specific pic_amiga.c.

branches: 1.19.10;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

branches: 1.18.50;
merge ktrace-lwp.

branches: 1.17.16;
cleanup old lpt(4) attachment, and glue ppbus in so that they can coexist:
* lpt device is defined in MI place (dev/ppbus/files.ppbus), dev/ic/lpt.c
is included there too; dev/ic/lpt.c is not included if ppbus is
configured or if there is alternative platform lpt (like for pc532)
* g/c MD lpt definitions and custom puc/upc attachments,
glue moved to conf/files and dev/pci/files.pci respectively; remove
device lpt definition from dev/isa/files.isa
* add ppbus parport attribute, atppc device attachments, adjust plip and lpt
glue

Bring some stuff up-to-date. To be continued.

pregenerate grf_ultms.c, so that gspa isn't needed during kernel build

Since everyone uses clock_subr.c (or should, if they don't currently),
list it in conf/files instead of in every port's files.*.

branches: 1.13.6;
Moved binary compatibility options from arch directory to cpu directory

Removed m68k OSes binary compatibility (this is a powerpc port, right?)

defflag GRF_NTCS before GRF_PAL (which has an option-dependency on
GRF_NTSC).

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.9.2;
Rename the audio "bus" attribute audiobus to avoid confusion with audio
device.

defflag lev6_defer.

add wscons support so that amiga/conf.c compiles

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

- replace "defopt" with "defparam" for options which must take a value,
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.3.2;
Add an e_trapsignal member to struct emul, so that emulated processes can
send the appropriate signal depending on the trap type.

branches: 1.2.2; 1.2.4;
amigappc: siop -> asiop

Initial AmigaPPC commit.

Lots of the work was done by Adam Ciarcinsky.

Currently, this only supports CyberPPC boards by Phase 5. Blizzard PPC
expected later.

The kernel is useless but for demonstrating that it starts... especially
interupts, and most of MMU support, is not in yet. Builtin console works,
however, and you can look at the kernel startup messages.

mark nsmb major obsolete

Systematize handling of removed drivers.

- Every driver that was removed and whose number hasn't already been
reused is now listed with a commented-out "obsolete" line.
- The format of these has been systematized. Future format changes can
probably be safely done with a script.
- This does not include a few cases of assignments that only lasted a
couple days, or stuff from before major reorgs. Some of these may
be included nonetheless, because there was a lot of ground to cover
and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.5.52; 1.5.54;
dependant -> dependent

No include directive supported in a majors.* file. We have to copy the
port-amiga majors.

branches: 1.3.56;
s/independant/independent/, from Zafer.

branches: 1.2.20; 1.2.22;
merge ktrace-lwp.

branches: 1.1.4; 1.1.18;
Add a stub for the majors (which just includes amiga's majors file).

Link the kernel with -q option to be able to relocate it with the boot loader.

branches: 1.7.2;
Some improvements based on the work of Adam Ciarcinski.
Adapted everything to integrate with current 5.99 source.
Added an Amiga PIC for interrupt handling.

Status:
A CSPPC machine probably boots into single user, but only few devices
will attach without problems (e.g. keyboard, serial, parallel, floppy disk,
the RTC, CC graphics, sometimes Ariande ethernet and A4000 IDE.
BPPC support is prepared, but unfinished and untested (I don't own a BPPC).

A problem which has to be solved is interrupt acknowledging, which may happen
twice. Once in the amiga drivers from sys/arch/amiga/dev and then in the PPC
specific pic_amiga.c.

branches: 1.6.78;
merge ktrace-lwp.

include "conf/std".

branches: 1.4.8;
Don't be confused with trigraphs.
EXEC_ELF -> EXEC_ELF32

branches: 1.3.2; 1.3.10;
Rename PPC_MPC6XX to PPC_OEA (and any mpc6xx reference to oea).

Use a common genassym.cf for all the PPC_MPC6XX ports. Add a makeoptions to
std.foo to indicate the directory to get genassym.cf from. Add an intrframe
to <powerpc/frame.h> and make trap_subr.S use symbolic offsets into it.

branches: 1.1.6; 1.1.10;
Initial AmigaPPC commit.

Lots of the work was done by Adam Ciarcinsky.

Currently, this only supports CyberPPC boards by Phase 5. Blizzard PPC
expected later.

The kernel is useless but for demonstrating that it starts... especially
interupts, and most of MMU support, is not in yet. Builtin console works,
however, and you can look at the kernel startup messages.