PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.72.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.71.2; 1.71.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove KMEMSTATS.

branches: 1.67.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.65.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.64.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

branches: 1.58.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.56.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.55.2; 1.55.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.52.2; 1.52.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.50.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.48.16; 1.48.20; 1.48.26; 1.48.28;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.47.10;
Add options COMPAT_40.

branches: 1.46.8; 1.46.10; 1.46.16;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.45.2; 1.45.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.43.2; 1.43.4; 1.43.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.41.2; 1.41.4; 1.41.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

options<space><tab>

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.33.4; 1.33.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.30.2;
Add options COMPAT_20.

branches: 1.29.4;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
- Use scsibus* at scsi?
- Use atabus* at ata?
- Use atapibus* atapi?
- Sort ATA/ATAPI device entries.
- Comment out aceride, piixide, siside, and viaide.

Add atabus.

Add options COMPAT_16.

branches: 1.23.2;
Remove nonexistent we* at isapnp.

Change DESKstation -> DeskStation, as per spelling on the Tyne board.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.19.2; 1.19.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove (commented-out) pmsi entries.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.13.2;
The wsmux pseudo device does not need a count anymore.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

update configurations for "struct platform" and related changes

sync with GENERIC: enable SOFTDEP, add vlan, etc.

branches: 1.9.2; 1.9.4;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Add WSEMUL_VT100 to configuration files using wsdisplay.
And update my current configuration. (MIMORI)

branches: 1.7.2;
- vga/pckbc attachment for jazz internal bus of Magnum derived machines
(including Pica, NEC RISCstation/RISCserver).
- TGA console initialization for NEC RISCstation 2250,
contributed by Shuichiro URATA <ur@a-r.org>

Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

branches: 1.5.2;
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

merge changes between OpenBSD-2.1 and OpenBSD-2.6

options<SPACE><TAB> and options "<foo>=<bar>" clean up
pointed point by enami@netbsd.org

merge to NetBSD-current (DeskStation and Algor support is currently broken)

branches: 1.1.1;
Initial revision

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Try to shrink kernels to smaller than ~6MB due to ARC BIOS restriction.

Currently NetBSD/arc kernels are loaded at 0x80200000
(on some machines ARC BIOS uses regions before it) and
ARC BIOS also uses around 0x807f0000, so bootloader fails
on loading >6MB kernels.

Note GXemul doesn't have this restriction because it loads
a kernel directly via a command line argument.

Tested by installing using sysinst on RAMDISK kernel on netbsd-9.

Should be pulled up to netbsd-9.

Retire "le* at pci?" from the shipped kernel configs:
- If the config had both an le@pci and a pcn, simply remove le@pci
(pcn would match at a higher priority anyway).
- If the config had le@pci enabled, but no pcn, change le@pci to pcn.
- If the config had le@pci commented out, but no pcn, change le@pci
to pcn and leave it commented out.

The pcn driver supports more chips than le@pci and does DMA directly
to/from mbufs rather than memory copies.

Remove FDDI support.

Remove HIPPI support and the esh(4) driver that uses it. There have not
been any users of HIPPI for some time, and it is unlikely to be resurrected.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.193.2; 1.193.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Remove references to "lmc" in the kernel configurations.

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.189.2; 1.189.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.185.10;
Remove KMEMSTATS.

branches: 1.184.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.180.2;
Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.179.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.178.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.171.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.168.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.167.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Remove trailing spaces.

branches: 1.165.2; 1.165.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.162.2; 1.162.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

It looks the ARC BIOS has another limit which prevents loading
a kernel larger than 8MB (it is not emulated by gxemul BTW),
so disable several devices in GENERIC and shrink RAMDISK kernel again
by sprinkled "no" keywords etc.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.157.2; 1.157.4;
Enable more PCI devices.

Enable options TMPFS.

Add CPUFLAGS to optimize for mips3 since no mips1 machines on this port.

Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.152.6; 1.152.10; 1.152.12; 1.152.16;
Remove systrace. Ok core@.

branches: 1.151.2; 1.151.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.149.2; 1.149.6;
Add (commented out) options RAID_AUTOCONFIG.

Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.147.2; 1.147.4; 1.147.8;
Add options COMPAT_40.

Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.145.2; 1.145.8; 1.145.10; 1.145.16; 1.145.18;
Remove tmpfs's experimental status. OK'ed by core@.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.143.2; 1.143.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.140.2;
- reorganize bootinfo structures and fix bootinfo handling in bootloader
(mostly based on pmax)
- pass symbol info from bootloader to kernel via bootinfo
(currently bootinfo is allocated in the bootloader and
copied by kernel later; maybe we should rethink about this)
- use passed bootinfo to initialize ksyms(4) in kernel
- remove options SYMTAB_SPACE from kernel config files
- bump bootloader version

Add 8k more SYMTAB_SPACE so that it fits again.

Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.137.4;
Add bmtphy at mii, found on 3Com 3C982-TXM:
> bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 7

Add support for pci_configure_bus(9) (a.k.a. options PCI_NETBSD_CONFIGURE)
so that PCI devices over ppb(4) work properly on PCI based NEC machines.

Tested on my NEC JC94 (Express5800/230) and 3Com 3C982-TXM,
which has a DEC/Intel 21154 PCI-PCI bridge and two 3C920 Ethernet chips.

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.134.2; 1.134.4; 1.134.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.132.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.131.2; 1.131.4;
Remove the tablet line discipline.

Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

swcr -> swcrypto

"pseudo-device crypto" really refers to the /dev/crypto API to the
opencrypto framework, not the framework itself. Update the comment
accordingly.

Add "pseudo-device swcr" (commented out if "pseudo-device crypto" is also
commented out).

branches: 1.125.2;
turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

options<space><tab>

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.116.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

branches: 1.113.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.109.2;
Add options COMPAT_20.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.107.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.98.2;
Add support for opencrypto, PCI accelerators to sys/arch/*/conf/GENERIC
files for machines I know to have genuine PCI slots. As sent to tech-kern
for feedback in December 2003. Based on feedback, opencrypto is commented
out in the macppc GENERIC (due to absense of GENERIC_SOFTINT support),
and added to the sparc64 config (sys/arch/sparc64/conf/GENERIC32).

Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

- Use scsibus* at scsi?
- Use atabus* at ata?
- Use atapibus* atapi?
- Sort ATA/ATAPI device entries.
- Comment out aceride, piixide, siside, and viaide.

Add new per-chip pciide drivers.

Add atabus.

Add options COMPAT_16.

Add esiop at pci to GENERIC which already have siop at pci.
esiop has been tested enouth now.
esiop not added to INSTALL kernels because of possible space constraint.
siop should be able to drive all adapters supported by esiop.

branches: 1.90.2;
Add isapnp0 at isa and enable working isa/isapnp devices.

Remove nonexistent we* at isapnp.

Don't enable both pc0 and vga0 at isa.

Change DESKstation -> DeskStation, as per spelling on the Tyne board.

Uppercase PICA.

"PICA" stands for "Performance-enhanced I/O and CPU Architecture."

Rewrite jazzio asc SCSI driver to use MI ncr53c9x and bus_dma(9) with
BUS_DMA_ALLOCNOW flag for jazzio bus DMAC.

Tested on Soda's NEC Image RISCstation (which is an OEM of Acer PICA),
and should fix port-arc/13388.

Add pseudo-device ksyms.

Enable oosiop at jazzio.
While I'm here, use wildcard for osiop unit.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

- Enable options SYMTAB_SPACE by default.
- Use options<space><tab> .

Enable vga0 at isa?, and add options VGA_RESET and
(commented out) options VGA_RASTERCONSOLE for NEC-J96A and NEC-R96.

Add options MIIVERBOSE.

Add (commented out) options SYMTAB_SPACE.

Add a configuration of struct platform for NEC-J96A,
NEC Express5800/240 with R4400 and EISA.

XXX not functionally working yet. (hangs after mountroot via NFS)

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.68.2; 1.68.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Switch from de to tlp by default.

Remove (commented-out) pmsi entries.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Fix typo.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.54.2;
The wsmux pseudo device does not need a count anymore.

Add trm at pci.

branches: 1.52.4;
Add more working PCI devices on arc:
pcscp* at pci?
epic* at pci?
pcn* at pci?
rtk* at pci?
sip* at pci?
and remove le at pci, which is superseded by pcn.

Enable siop at pci.

Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

More comment changes: 90x[B] -> 90x[BC]

branches: 1.47.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

update configurations for "struct platform" and related changes

Add iha at pci .

Sort some entries.

Add MD attachments for the Symbios/NCR 53c710 SCSI controller,
found on the NEC Express5800/230A.

branches: 1.41.2;
Switch pica to jazzio.
Split shared MD portion between algor and jazzio.

Add pseudo-device vlan

branches: 1.39.2;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Add WSEMUL_VT100 to configuration files using wsdisplay.
And update my current configuration. (MIMORI)

Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.33.2;
- vga/pckbc attachment for jazz internal bus of Magnum derived machines
(including Pica, NEC RISCstation/RISCserver).
- TGA console initialization for NEC RISCstation 2250,
contributed by Shuichiro URATA <ur@a-r.org>

Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

NEC RISCstation 2250 (RD-94) PCI bus support,
contributed by Shuichiro URATA <ur@a-r.org>

branches: 1.30.2;
ncr(4) wouldn't work, so s/ncr/siop/.

add stf pseudo interface (commented out due to possible security risks)

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

merge changes between OpenBSD-2.1 and OpenBSD-2.6

Nuke NKMEMCLUSTERS.

options<SPACE><TAB> and options "<foo>=<bar>" clean up
pointed point by enami@netbsd.org

Add commented out "ident"-command
from hubertf's changes to (removed) pica/conf/GENERIC

merge to NetBSD-current (DeskStation and Algor support is currently broken)

Moved from /cvsroot/syssrc/sys/arch/pica/conf/GENERIC,v

Add overlay to kernel configs.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

branches: 1.18.8;
It's time to be COMPAT_14.

branches: 1.17.6;
Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Added a (commented out) configuration line for the RAIDframe device driver.

remove options FIFO; it's now the default

Add commented out "options FFS_EI"

Fix a few screwups that made it impossible to config these kernels.

Add COMPAT_13.

add pseudo-device rnd, commented out

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

Pulldown from marc-pcmcia branch: minimal changes to avoid namespace
collision between Pica port "com" (now "pcom") driver and more heavily-used
"com" driver.

add a before tab to SCSIVERBOSE

add commented out reference SCSIVERBOSE option

branches: 1.6.8;
Adopt for new file system and root spec grammar.

Eliminate obsolete TIMEZONE and DST options.
Eliminate obsolete global kernel variable "struct timezone tz"
Add RTC_OFFSET option
Add global kernel variable rtc_offset, which is initialized by
RTC_OFFSET at kernel compile time.
on i386, x68k, mac68k, pc532 and arm32, RTC_OFFSET indicates how many
minutes west (east) of GMT the hardware RTC runs. Defaults to 0.
Places where tz variable was used to indicate this in the past have
been replaced with rtc_offset.
Add sysctl interface to rtc_offset.
Kill obsolete DST_* macros in sys/time.h
gettimeofday now always returns zeroed timezone if zone is requested.
settimeofday now ignores and logs attempts to set non-existant kernel
timezone.

branches: 1.4.2;
add 'pseudo-device ccd' where necessary; PR kern/1830.

add COMPAT_12.

RCS id police.

branches: 1.1.1;
Initial revision

merge changes between OpenBSD-2.1 and OpenBSD-2.6

branches: 1.1.1;
Initial revision

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.68.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.67.2; 1.67.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove KMEMSTATS.

branches: 1.63.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.61.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.60.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

branches: 1.54.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.52.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.51.2; 1.51.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.49.2; 1.49.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.47.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.45.16; 1.45.20; 1.45.26; 1.45.28;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.44.10;
Add options COMPAT_40.

branches: 1.43.8; 1.43.10; 1.43.16;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.42.2; 1.42.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.40.2; 1.40.4; 1.40.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.38.2; 1.38.4; 1.38.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

options<space><tab>

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.30.4; 1.30.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.2;
Add options COMPAT_20.

branches: 1.27.4;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.24.2;
- Use scsibus* at scsi?
- Use atabus* at ata?
- Use atapibus* atapi?
- Sort ATA/ATAPI device entries.
- Comment out aceride, piixide, siside, and viaide.

Add options COMPAT_16.

branches: 1.22.6;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.21.2; 1.21.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove (commented-out) pmsi entries.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.15.2;
The wsmux pseudo device does not need a count anymore.

branches: 1.14.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

update configurations for "struct platform" and related changes

sync with GENERIC: enable SOFTDEP, add vlan, etc.

branches: 1.11.2;
Switch pica to jazzio.
Split shared MD portion between algor and jazzio.

branches: 1.10.2;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Add WSEMUL_VT100 to configuration files using wsdisplay.
And update my current configuration. (MIMORI)

branches: 1.8.2;
- vga/pckbc attachment for jazz internal bus of Magnum derived machines
(including Pica, NEC RISCstation/RISCserver).
- TGA console initialization for NEC RISCstation 2250,
contributed by Shuichiro URATA <ur@a-r.org>

Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

NEC RISCstation 2250 (RD-94) PCI bus support,
contributed by Shuichiro URATA <ur@a-r.org>

branches: 1.5.2;
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

merge changes between OpenBSD-2.1 and OpenBSD-2.6

Nuke NKMEMCLUSTERS.

options<SPACE><TAB> and options "<foo>=<bar>" clean up
pointed point by enami@netbsd.org

merge to NetBSD-current (DeskStation and Algor support is currently broken)

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

fix various typos in comments and messages.

Retire "le* at pci?" from the shipped kernel configs:
- If the config had both an le@pci and a pcn, simply remove le@pci
(pcn would match at a higher priority anyway).
- If the config had le@pci enabled, but no pcn, change le@pci to pcn.
- If the config had le@pci commented out, but no pcn, change le@pci
to pcn and leave it commented out.

The pcn driver supports more chips than le@pci and does DMA directly
to/from mbufs rather than memory copies.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.73.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.72.2; 1.72.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove KMEMSTATS.

branches: 1.68.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.66.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.65.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

branches: 1.59.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.57.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.56.2; 1.56.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.53.2; 1.53.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.51.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.49.16; 1.49.20; 1.49.26; 1.49.28;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.48.10;
Add options COMPAT_40.

branches: 1.47.8; 1.47.10; 1.47.16;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.46.2; 1.46.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.45.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.43.2; 1.43.4; 1.43.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

options<space><tab>

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.35.2;
Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

branches: 1.34.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.31.2;
Add options COMPAT_20.

branches: 1.30.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

- Use scsibus* at scsi?
- Use atabus* at ata?
- Use atapibus* atapi?
- Sort ATA/ATAPI device entries.
- Comment out aceride, piixide, siside, and viaide.

Add new per-chip pciide drivers.

Add atabus.

Add options COMPAT_16.

branches: 1.20.2;
Enable oosiop at jazzio.
While I'm here, use wildcard for osiop unit.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.17.2; 1.17.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Switch from de to tlp by default.

Remove (commented-out) pmsi entries.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.8.2;
The wsmux pseudo device does not need a count anymore.

More comment changes: 90x[B] -> 90x[BC]

branches: 1.6.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

update configurations for "struct platform" and related changes

branches: 1.4.2;
Switch pica to jazzio.
Split shared MD portion between algor and jazzio.

branches: 1.3.2;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Add WSEMUL_VT100 to configuration files using wsdisplay.
And update my current configuration. (MIMORI)

branches: 1.1.2; 1.1.4;
- vga/pckbc attachment for jazz internal bus of Magnum derived machines
(including Pica, NEC RISCstation/RISCserver).
- TGA console initialization for NEC RISCstation 2250,
contributed by Shuichiro URATA <ur@a-r.org>

Use shared Makefile.mips

branches: 1.39.4;
move address to resolve conflict with firmware working memory
of NEC RISCstation 2250, from Shuichiro URATA <ur@a-r.org>.

branches: 1.38.2;
Also share BE ldscripts.

Add "install" target, so "make install" after building the kernel
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.

HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.

some clean up, especially,
- use "objcopy -O ecoff-littlemips" instead of elf2ecoff to make cross
compilation easy. this also workarounds a problem that -current
elf2ecoff doesn't work with ARC BIOS.
- use -mips2 for ld, since mixing -mips3 and -mips2 doesn't work with
-current ld.
mostly from Izumi Tsutsui <tsutsui@netbsd.org>

merge changes between OpenBSD-2.1 and OpenBSD-2.6

Revert STRIPPROG -> STRIP

options<SPACE><TAB> and options "<foo>=<bar>" clean up
pointed point by enami@netbsd.org

Add "dependall" target for comfort.

merge to NetBSD-current (DeskStation and Algor support is currently broken)

Moved from /cvsroot/syssrc/sys/arch/pica/conf/Makefile.pica,v

STRIP -> STRIPPROG

be more efficient when doing the SYSTEM_LD_TAIL for -g kernels: don't
copy them just to strip them, use strip -o.

clean up a bit after jason :)

- fix emitrules() like emitfiles() to deal with the prefix (otherwise it
would attempt to find the file in the normal base for the NORMAL_C rule).
- add emitincludes() which adds include directives for each prefix to the
$INCLUDES variable in the makefile.
- add %INCLUDES to each Makefile.arch to deal with the above.

this makes "prefix" actually work in a usable manner, and now i can move
on to fixing compiler warnings (errors) in the ESP code. :)

branches: 1.25.4;
Some minor, mostly costmetic, changes to CPPFLAGS/CFLAGS.

Add -Wpointer-arith warning since `void *' arithmetic is not ANSI C.

change handling of libkern:
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way

distclean is a synonym for cleandir

Specify a non-profiling C rule.

Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)

Make this work with DEBUG="-g"

Make sure CPP, AR, AS, and RANLIB are defined.

Define LORDER, NM, and TSORT here, like we do the rest of the tools.

branches: 1.16.2;
PR/4162: Chris Jones: make cleandir does not work properly; it does not
remove the object files and the .depend file in the kernel build directory.

branches: 1.15.2;
Generate assym.h dependencies when making 'depend'.

Apply sys/arch/mips changes (MACH_ -> MIPS_ or MIPS3_) changes to Pica port.
PICA Kernel compiles with warnings and links, otherwise untested.

Define the `cleankernel' target consistently with other ports.

Nuke some options GENERIC residue.

Nuke some GENERIC residue.

* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
Lets users over-ride with makeoptions COPTS="..." in kernel config files.

Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.

Move strip(1) flags into a separate variable, so that $STRIP can
be passed to subordinate make(1)s. Remove $TOUCH. Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.

Wrap the default definition of `S' in `.ifndef'.

Put into . Remove hooks for `config-dependent' and
`device-driver' flags.

* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.

* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.

Make `make depend' work for libraries.

Fix make depend target, and add -Werror to CFLAGS.

Update Pica kernel makefile template (Makefile.pica) to NetBSD 1.1A
conventions, so that Pica kernel can build libkern and libcompat.
Based on the changes to pmax/conf/Makefile.pmax.

branches: 1.1.1;
Initial revision

- use CPUFLAGS rather than CFLAGS/AFLAGS
- specify "-march=r4000 -mabi=32" rather than -mips2

branches: 1.14.4; 1.14.8; 1.14.14;
. Have dbsym explicitly suggest increasing SYMTAB_SPACE when
an overflow occurs.
. Make this error a fatal build time error
. Move the support for dbsym into the MI Makefile.kern.inc,
conditional upon the SYMTAB_SPACE option being defined in
the kernel config file.

branches: 1.13.2; 1.13.8;
Ecoff kernels are no longer needed.

Remove .mdebug.abi32 and .comment sections created by binutils-2.14
on converting kernels into ECOFF.
ARC BIOS may be confused by these sections without valid address.

branches: 1.11.2;
Remove -mcpu=r4000 from CFLAGS. It's no longer available on gcc3.

branches: 1.10.2;
Set LINKFORMAT=-N.
ARCBIOS on Tyne can recognize only ECOFF with OMAGIC header.

XXX The real fix is implementing native bootloader.

Remove .pdr section which is created by binutils-2.13.2.1
on objcopy call to make ECOFF kernels.

Call ${DBSYM} in SYSTEM_LD_TAIL_EXTRA.

Put the extra kernel names in EXTRA_KERNELS

Remove .mdebug and .ident sections from ECOFF kernels so that
the ARC BIOS can load ECOFF kernels built with new-toolchain properly.

Roll the rest of the ports over to the new MI kernel build machinery.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.

branches: 1.4.2;
Slight cleanup.

branches: 1.3.2;
abstract "${OBJCOPY} --output-target=ecoff-littlemips"

objcopy -> ${OBJCOPY}

branches: 1.1.2; 1.1.4;
Use shared Makefile.mips

merge changes between OpenBSD-2.1 and OpenBSD-2.6

branches: 1.1.1;
Initial revision

remove algor related codes, because there is independent (and working!)
algor port now.

sync with GENERIC: enable SOFTDEP, add vlan, etc.

branches: 1.9.2;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

- vga/pckbc attachment for jazz internal bus of Magnum derived machines
(including Pica, NEC RISCstation/RISCserver).
- TGA console initialization for NEC RISCstation 2250,
contributed by Shuichiro URATA <ur@a-r.org>

Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

branches: 1.6.2;
ncr(4) wouldn't work, so s/ncr/siop/.

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

merge changes between OpenBSD-2.1 and OpenBSD-2.6

options<SPACE><TAB> and options "<foo>=<bar>" clean up
pointed point by enami@netbsd.org

merge to NetBSD-current (DeskStation and Algor support is currently broken)

branches: 1.1.1;
Initial revision

Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

branches: 1.55.100;
This file is mostly identical with GENERIC except pccons/wscons,
so just include GENERIC and use "no" keyword of options(4).

XXX arc/dev/pccons.c needs cleanup for -Wshadow and -Wcast-qual.

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.53.2; 1.53.4; 1.53.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.51.2; 1.51.4; 1.51.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

options<space><tab>

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.43.2;
Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

branches: 1.42.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.39.2;
Add options COMPAT_20.

branches: 1.38.4;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.34.2;
Split the Intel i31244 SATA controller ("Artisea") driver out of piixide
into its own driver (artsata).

Split out the Silicon Image SATALink support into its own driver,
"satalink".

- Use scsibus* at scsi?
- Use atabus* at ata?
- Use atapibus* atapi?
- Sort ATA/ATAPI device entries.
- Comment out aceride, piixide, siside, and viaide.

Add new per-chip pciide drivers.

Add atabus.

Add options COMPAT_16.

branches: 1.28.2;
Add isapnp0 at isa and enable working isa/isapnp devices.

Remove nonexistent we* at isapnp.

Change DESKstation -> DeskStation, as per spelling on the Tyne board.

Uppercase PICA.

"PICA" stands for "Performance-enhanced I/O and CPU Architecture."

Enable oosiop at jazzio.
While I'm here, use wildcard for osiop unit.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.21.2; 1.21.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Switch from de to tlp by default.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

The "gif*" tunnelling interface does everything ipip does.
Move usage example from ipip.4 to gif.4
Excise ipip and stitch up the scars.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.13.2;
The wsmux pseudo device does not need a count anymore.

Add trm at pci.

branches: 1.11.4;
Add more working PCI devices on arc:
pcscp* at pci?
epic* at pci?
pcn* at pci?
rtk* at pci?
sip* at pci?
and remove le at pci, which is superseded by pcn.

Enable siop at pci.

More comment changes: 90x[B] -> 90x[BC]

branches: 1.8.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

update configurations for "struct platform" and related changes

sync with GENERIC: enable SOFTDEP, add vlan, etc.

branches: 1.5.2;
Switch pica to jazzio.
Split shared MD portion between algor and jazzio.

branches: 1.4.2;
don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

Add WSEMUL_VT100 to configuration files using wsdisplay.
And update my current configuration. (MIMORI)

Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.

branches: 1.1.2; 1.1.4;
- vga/pckbc attachment for jazz internal bus of Magnum derived machines
(including Pica, NEC RISCstation/RISCserver).
- TGA console initialization for NEC RISCstation 2250,
contributed by Shuichiro URATA <ur@a-r.org>

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.85.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.84.2; 1.84.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove KMEMSTATS.

branches: 1.80.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add commented out bpfjit options to mips kernels.
While here, add 2 missing RCS ids.

branches: 1.78.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.77.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

branches: 1.71.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.