| History log of /src/sys/arch/arm/samsung/files.exynos |
| Revision | | Date | Author | Comments |
| 1.38 |
| 06-Sep-2025 |
thorpej | Step towards modularizing the Flattened Device Tree code.
Define attributes for each of the specific device bindings: clock,
dai, dma, gpio, i2c, iommu, mbox, mmc_pwrseq, phy, power, power domain,
pwm, regulator, reset controller, spi, system controller, pin
controller. Include these support files only if either a provider
or consumer with one of these attributes is present in the kernel
config.
Add the necessary attributes to the device / attach declarations for
each provider and consumer.
There are some bindings that are consumed by generic code (iommu, pinctrl,
power, power domain). Provide weak stubs for these routines to handle
situations where there is no provider.
No actual code changed; NFCI.
|
| 1.37 |
| 29-Sep-2020 |
jmcneill | Collapse all CPU_CORTEXA<n> options into CPU_CORTEX and do runtime
detection instead of ifdefs where required.
|
| 1.36 |
| 03-Jan-2019 |
jmcneill | Add multi-cluster CPU spinup code for Exynos5422.
|
| 1.35 |
| 21-Nov-2018 |
skrll | G/C
|
| 1.34 |
| 18-Oct-2018 |
skrll | Provide generic start code that assumes the MMU is off and caches are
disabled as per the linux booting protocol for ARMv6 and ARMv7 boards.
u-boot image type should be changed to 'linux' for correct behaviour.
The new start code builds a minimal "bootstrap" L1PT with cached access
disabled and uses the same table for all processors. AP startup is
performed in less steps and more code is written in C.
The bootstrap tables and stack are placed into an (orphaned) section
"_init_memory" which is given to uvm when it is no longer used.
Various kernels have been converted to use this code and tested. Some
boards were provided by TNF. Thanks!
The GENERIC kernel now boots on boards using the TEGRA, SUNXI and EXYNOS
kernels. The GENERIC kernel will also work on RPI2 using u-boot.
Thanks to martin@ and aymeric@ for testing on parallella and nanosoc
respectively
|
| 1.33 |
| 21-Sep-2018 |
skrll | Centralise defparam CONSADDR, CONSPEED, CONMODE and CONADDR into
opt_console.h and adjust.
|
| 1.32 |
| 11-Sep-2018 |
jmcneill | Add Exynos5 SMP support.
|
| 1.31 |
| 19-Aug-2018 |
skrll | Some changes to bring back exynos4 support and make exynos5 support more
modern/generic
- Provide a exynos_platform_early_putchar based on CONSADDR and remove
EXYNOS_CONSOLE_EARLY
- Provide devmaps for exynos4 and exynos5
- Simplify exynos_bootstrap
- Update exynos_start.S to use exynos_platform_early_putchar - this
needs a fix in a9_subr.S for arm_cpuinit to save lr in a callee save
register and not use ip. Maybe this change is safe now, but too much
testing required to commit it now.
|
| 1.30 |
| 05-Jul-2018 |
jmcneill | Replace sscom with a much simpler uart driver. The simpler driver is 1/4th
the size and has the added benefit of not freezing when an arrow key is
pressed.
|
| 1.29 |
| 04-Jul-2018 |
jmcneill | Add driver for Exynos PWM timer.
|
| 1.28 |
| 03-Jul-2018 |
jmcneill | Add support for Samsung Exynos USB.
|
| 1.27 |
| 02-Jul-2018 |
jmcneill | Attach mct early. Do not attach gtmr to mct.
XXX gtmr still needed for setstatclock symbol
|
| 1.26 |
| 01-Jul-2018 |
jmcneill | Delete chipid and sysmmu drivers, they don't do anything but print that
they are not implemented at attach time.
|
| 1.25 |
| 17-Mar-2018 |
ryo | branches: 1.25.2;
move from sys/arch/arm/arm32/armv7_generic_dma.c to sys/arch/arm/arm/arm_generic_dma.c,
and change variable name from armv7_generic_dma_tag to arm_generic_dma_tag
no functional change. (preliminary changes for merging aarch64)
|
| 1.24 |
| 20-Jun-2017 |
jmcneill | branches: 1.24.4;
Add Exynos 5410 clock controller driver.
|
| 1.23 |
| 11-Jun-2017 |
jmcneill | Simplify MCT; just enable it and then attach an ARMv7 generic timer.
|
| 1.22 |
| 10-Jun-2017 |
jmcneill | Get the EXYNOS kernel building again with recent FDT changes. Untested.
|
| 1.21 |
| 03-Jan-2016 |
marty | branches: 1.21.10;
XU4 interrupt combiner / fake sysmmu
Add sysmmu to have something that calls through to the combiner's establish
routine. Debug the combiner with it.
At this point the combiner is mostly done, but the interrupt handler has not
been tested. This may never happen as we may never support any of the
devices that use the combiner for interrupts. (Or maybe mct)
|
| 1.20 |
| 27-Dec-2015 |
marty | XU4 USB snapshot: Reorganize source files
This is just a skeleton, not a set of drivers, but the pieces are now
more or less in the right places.
|
| 1.19 |
| 26-Dec-2015 |
jmcneill | Add dwcmmc glue
|
| 1.18 |
| 24-Dec-2015 |
marty | XU4 GPIO Review Changes
Implement suggestions from Jared.
|
| 1.17 |
| 21-Dec-2015 |
marty | XU4 FDT final checkpoint
step N of N: get rid of baggage by removing whole files. What's left is in
approximately the same shape as when the FDT update started, that is mostly
broken. What's missing is most of the 76 devices recognized in the dtd. In
other words, This is barely the start of a port.
Next up, gpio then i2c, followed either by straightening out usb or getting
the sdhc driver to work -- both probably require getting the interrupt
combiner to work first. A large chunk of work is left to do on the clocks.
I barely got them attaching to fdt and didn't do anything to take advantage
of the information in the dtd.
None of the other existing drivers, such as they are, properly request gpios,
i2c or clocks, and, of course power domains are off the table.
|
| 1.16 |
| 21-Dec-2015 |
marty | XU4 FDT Last drivers converted
There is a minimum conversion on the clock driver.
The USB driver needs reordering and is broken, but it was broken before.
Next up: tactical nuclear weapons
|
| 1.15 |
| 21-Dec-2015 |
marty | XU4 FDT checkpoint
It is rather amazing that XU4 gets as far as it does, given how much of this
code simply doesn't work. Focusing now on getting everything converted to
FDT. Next up USB and clocks. After that nuke everything that's not needed
and start the port in earnest.
|
| 1.14 |
| 19-Dec-2015 |
marty | XU4 GPIO FDT broken snapshot
This is broken. exynos_gpio_bank_config and the call to it are wrong, and
the acquire function doesn't work.
But I'm in over my head and I need to discuss this:
There is a problem with the dtd: it doesn't have addresses for the individual
gpios. Do I add the addresses to it, or go back to the old version where I
have them hard coded in the driver.
There is a problem with creating the gpio device entries: I suspect I really
need to treat the pinctrl devices as busses and create the gpios as attached
to those busses, but I'm not familiar with how to do that in NetBSD. At the
minimum, a pointer to a similar situation would give me code to follow.
This is different than the usual bus attachment in that the gpios aren't
devices in the dtd (they don't have "compatible" properties) so they don't
get an attach routine called. An alternative to generating the bus
attachments might be to add "compatible" properties to the GPIO entries
in the dtd. so that they do get attached in the normal way.
If I'm going to modify the DTD, then it should be checked in, so a decision
on where to check them in would be nice, even if it does mean spreading them
all over because of license issues. (This DTD is GPL v2)
|
| 1.13 |
| 17-Dec-2015 |
marty | EXYNOS FDT sscom
|
| 1.12 |
| 15-Dec-2015 |
marty | XU4 FDT WDT - convert driver to FDT
The watchdog timer is the most trivial driver in exynos, from the POV of
converting to FDT, so go ahead and do it first. NOTE: There's a hack in
the driver that needs to eventually be fixed -- the clock frequency is
hardwired when it should be gotten from the clock in the device tree. I'll
come back and fix this when I'm more comfortable with the api.
|
| 1.11 |
| 14-Dec-2015 |
marty | XU4 FDT Enable the minimum device tree
This enables the use of FDT on the XU4 but doesn't add any drivers. However,
with this check in, XU4 becomes useless without a device tree blob from the
Linux tree, which isn't checked in anywhere.
|
| 1.10 |
| 12-Dec-2015 |
marty | XU4: re-enable gpio
c'n'p error left gpio disabled. fixed.
|
| 1.9 |
| 11-Dec-2015 |
marty | Move everything back into files.exynos
|
| 1.8 |
| 05-Dec-2015 |
jmcneill | Add clock controller backend for Exynos5422. Work in progress.
|
| 1.7 |
| 21-May-2014 |
reinoud | branches: 1.7.2; 1.7.4; 1.7.8; 1.7.10;
Provide bitbanging IIC for Samsung's Exynos
|
| 1.6 |
| 09-May-2014 |
reinoud | branches: 1.6.2;
Implement gpio framework for the Samsung Exynos series.
Note that only the Exynos4 gpio registers are defined now and provision is
taken to allow for seamlessness adding of Exynos5 values.
|
| 1.5 |
| 05-May-2014 |
reinoud | exywdt -> exyowdt
|
| 1.4 |
| 29-Apr-2014 |
reinoud | Commit initial USB adapter support and associated DMA tags
|
| 1.3 |
| 22-Apr-2014 |
reinoud | Missing EOL at end of file
|
| 1.2 |
| 13-Apr-2014 |
reinoud | Remove trustzone firmware indirect calls by explicit calling the exynos
routines in exynos_soc.c
While here, also remove unused variable conaddr
|
| 1.1 |
| 13-Apr-2014 |
matt | Add initial support for the ODROID-XU and ODROID-U3.
Still a work in progress. Started by nick and reinoud.
|
| 1.6.2.2 |
| 18-May-2014 |
rmind | sync with head
|
| 1.6.2.1 |
| 09-May-2014 |
rmind | file files.exynos was added on branch rmind-smpnet on 2014-05-18 17:44:59 +0000
|
| 1.7.10.3 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
| 1.7.10.2 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.7.10.1 |
| 27-Dec-2015 |
skrll | Sync with HEAD (as of 26th Dec)
|
| 1.7.8.3 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.7.8.2 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.7.8.1 |
| 21-May-2014 |
tls | file files.exynos was added on branch tls-maxphys on 2014-08-20 00:02:47 +0000
|
| 1.7.4.2 |
| 10-Aug-2014 |
tls | Rebase.
|
| 1.7.4.1 |
| 21-May-2014 |
tls | file files.exynos was added on branch tls-earlyentropy on 2014-08-10 06:53:52 +0000
|
| 1.7.2.2 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.7.2.1 |
| 21-May-2014 |
yamt | file files.exynos was added on branch yamt-pagecache on 2014-05-22 11:39:34 +0000
|
| 1.21.10.1 |
| 18-Jul-2017 |
snj | Pull up following revision(s) (requested by jmcneill in ticket #114):
sys/arch/arm/samsung/exynos_intr.h: revision 1.3
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1
distrib/utils/embedded/mkimage: revision 1.66
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7
sys/dev/gpio/gpio.c: revision 1.59
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1
sys/conf/Makefile.kern.inc: revision 1.257
sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2
sys/conf/Makefile.kern.inc: revision 1.258
sys/arch/arm/fdt/psci_fdt.h: revision 1.1
sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1
sys/arch/evbarm/conf/files.sunxi: revision 1.1
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9
sys/arch/arm/samsung/files.exynos: revision 1.22
distrib/utils/embedded/conf/armv7.conf: revision 1.13
sys/arch/arm/samsung/files.exynos: revision 1.23
sys/arch/evbarm/conf/std.tegra: revision 1.15
distrib/utils/embedded/conf/armv7.conf: revision 1.14
sys/arch/arm/samsung/files.exynos: revision 1.24
distrib/utils/embedded/conf/armv7.conf: revision 1.15
sys/arch/evbarm/sunxi/genassym.cf: revision 1.1
sys/arch/arm/samsung/exynos_fdt.c: file removal
sys/dev/fdt/fdt_pinctrl.c: revision 1.4
sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1
sys/dev/usb/ehci.c: revision 1.255
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1
sys/dev/ic/dwc_mmc.c: revision 1.11
sys/arch/arm/cortex/gic.c: revision 1.24
distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17
etc/etc.evbarm/Makefile.inc: revision 1.87
etc/etc.evbarm/Makefile.inc: revision 1.88
sys/arch/arm/fdt/gic_fdt.c: revision 1.5
etc/Makefile: revision 1.429
sys/arch/arm/fdt/gic_fdt.c: revision 1.6
sys/arch/arm/fdt/gic_fdt.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2
sys/arch/evbarm/conf/std.sunxi: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3
sys/arch/evbarm/conf/std.sunxi: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4
sys/arch/evbarm/conf/std.sunxi: revision 1.3
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1
sys/dev/gpio/gpiovar.h: revision 1.17
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8
sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.12
sys/dev/fdt/fdtvar.h: revision 1.21
sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.13
sys/dev/fdt/fdtvar.h: revision 1.22
sys/arch/evbarm/conf/SUNXI: revision 1.10
sys/dev/fdt/fdtvar.h: revision 1.23
sys/arch/evbarm/conf/SUNXI: revision 1.11
sys/dev/fdt/gpioleds.c: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.24
sys/arch/evbarm/conf/SUNXI: revision 1.12
sys/arch/evbarm/conf/SUNXI: revision 1.13
sys/arch/arm/cortex/gic.c: revision 1.30
sys/arch/evbarm/conf/SUNXI: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.16
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1
etc/Makefile: revision 1.430
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2
etc/Makefile: revision 1.431
sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4
sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6
sys/arch/arm/samsung/exynos_platform.c: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.29
sys/arch/arm/samsung/exynos_platform.c: revision 1.2
sys/arch/evbarm/conf/mk.vexpress: revision 1.3
sys/arch/arm/samsung/exynos_platform.c: revision 1.3
sys/arch/evbarm/conf/mk.vexpress: revision 1.4
sys/arch/arm/samsung/exynos_platform.c: revision 1.4
sys/arch/arm/arm/psci.h: revision 1.1
sys/arch/arm/samsung/exynos_platform.c: revision 1.5
sys/arch/arm/samsung/exynos_platform.c: revision 1.6
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10
external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12
sys/dev/fdt/files.fdt: revision 1.17
sys/dev/fdt/files.fdt: revision 1.18
sys/dev/fdt/files.fdt: revision 1.19
sys/arch/arm/samsung/exynos_sscom.c: revision 1.8
sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1
sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1
sys/arch/arm/samsung/exynos_sscom.c: revision 1.9
sys/arch/arm/conf/files.arm: revision 1.133
sys/arch/arm/samsung/mct_var.h: revision 1.5
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2
sys/arch/evbarm/conf/std.vexpress: revision 1.6
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.30
sys/arch/arm/sunxi/files.sunxi: revision 1.2
sys/dev/ofw/openfirm.h: revision 1.35
sys/arch/arm/sunxi/files.sunxi: revision 1.3
sys/dev/ofw/openfirm.h: revision 1.36
sys/arch/arm/sunxi/files.sunxi: revision 1.4
sys/arch/arm/sunxi/files.sunxi: revision 1.5
sys/arch/evbarm/exynos/exynos_machdep.c: file removal
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1
sys/arch/arm/samsung/sscom.c: revision 1.9
sys/arch/arm/sunxi/files.sunxi: revision 1.6
sys/dev/fdt/ohci_fdt.c: revision 1.1
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.7
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.8
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.9
sys/arch/arm/samsung/exynos_sscom.c: revision 1.10
sys/arch/evbarm/conf/mk.tegra: revision 1.5
sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4
sys/arch/evbarm/conf/mk.tegra: revision 1.6
sys/arch/evbarm/conf/EXYNOS: revision 1.15
sys/arch/evbarm/conf/EXYNOS: revision 1.16
sys/arch/evbarm/conf/EXYNOS: revision 1.17
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.19
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5
sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1
sys/arch/evbarm/conf/mk.sunxi: revision 1.1
sys/arch/evbarm/include/bootconfig.h: revision 1.7
sys/arch/evbarm/conf/TEGRA: revision 1.24
sys/arch/arm/arm/psci.c: revision 1.1
sys/dev/led.c: revision 1.1
sys/dev/led.c: revision 1.2
sys/arch/arm/arm/psci_arm.S: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2
sys/dev/fdt/ehci_fdt.c: revision 1.1
sys/dev/fdt/ehci_fdt.c: revision 1.2
sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.21
sys/arch/arm/sunxi/files.sunxi: revision 1.10
sys/arch/arm/sunxi/files.sunxi: revision 1.11
sys/dev/fdt/fdtbus.c: revision 1.14
sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1
sys/arch/arm/samsung/exynos5422_dma.c: file removal
usr.bin/config/mkmakefile.c: revision 1.69
sys/conf/files: revision 1.1178
sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1
sys/arch/evbarm/exynos/exynos_start.S: revision 1.4
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12
sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2
sys/arch/evbarm/conf/SUNXI: revision 1.1
external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.2
sys/arch/arm/fdt/psci_fdt.c: revision 1.1
sys/arch/evbarm/conf/SUNXI: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.4
sys/arch/evbarm/conf/files.exynos: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.6
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1
sys/dev/fdt/fixedfactorclock.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.7
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.8
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3
sys/dev/ic/dwc_mmc_reg.h: revision 1.6
sys/dev/fdt/fdt_subr.c: revision 1.16
sys/arch/evbarm/conf/SUNXI: revision 1.9
usr.bin/config/mkmakefile.c: revision 1.70
sys/dev/fdt/fdt_phy.c: revision 1.1
sys/arch/evbarm/conf/ODROID-XU: file removal
sys/arch/arm/fdt/arm_fdt.c: revision 1.4
sys/arch/arm/samsung/exynos_reg.h: revision 1.14
sys/conf/files: revision 1.1180
sys/arch/arm/samsung/exynos_reg.h: revision 1.15
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6
sys/dev/ic/dwc_mmc_var.h: revision 1.6
sys/arch/arm/samsung/exynos_combiner.c: revision 1.7
sys/arch/evbarm/exynos/platform.h: revision 1.2
sys/arch/arm/fdt/files.fdt: revision 1.12
sys/arch/evbarm/conf/std.exynos: revision 1.2
sys/arch/evbarm/conf/std.exynos: revision 1.3
sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6
sys/arch/arm/sunxi/sunxi_com.c: revision 1.1
sys/dev/led.h: revision 1.1
sys/arch/evbarm/conf/std.exynos: revision 1.5
sys/arch/arm/sunxi/sunxi_com.c: revision 1.2
sys/arch/evbarm/conf/files.evbarm: revision 1.26
usr.bin/config/defs.h: revision 1.99
sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6
sys/arch/arm/samsung/exynos_soc.c: revision 1.32
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2
sys/arch/arm/samsung/mct.c: revision 1.11
sys/arch/evbarm/conf/ODROID-U: file removal
sys/arch/arm/samsung/mct.c: revision 1.12
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4
Get the EXYNOS kernel building again with recent FDT changes. Untested.
Use arm_fdt_cpu_hatch and add mmu entry for DTB
Fix exynos5 devmap, bootstrap, and implement early_putchar.
Calculate UART frequency based on bootloader config.
Fix KERNEL_BASE_PHYS (how did this ever work?)
Avoid divide-by-zero for unconfigured PLLs
Correctly initialize i2cbus attach args.
Add delay and enable mct timecounter.
Fix build w/o VERBOSE_INIT_ARM
Remove ODROID-U and ODROID-XU kernel configs as they no longer work.
- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local
Use fdtbus_intr_establish to hook in block interrupts instead of
intr_establish.
Simplify MCT; just enable it and then attach an ARMv7 generic timer.
Add support for building DTB files during kernel build, from christos.
build vexpress-v2p-ca15-tc1.dtb with the kernel
build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel
Allow multiline makeoptions to work by quoting the newline..
Bump for quoting makeoptions with multiple lines.
un-c99
bump required config version for multiline makeoptions feature
Set DTS makeoption in kernel config
Assign DTB files to a variable so we can make -V DTB
put the dtb files with their kernels.
no need for debug printing.
Don't assume that CPU index = GIC CPU interface number. We can determine
the current CPU interface number by reading from the read-only
GICD_ITARGETSR0 through GICD_ITARGETSR7 registers.
This gets interrupts working on Exynos 5422, where the boot processor has
GIC CPU interface #4.
use -v to get the expanded variable.
Use -v to get the expanded variables.
Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach.
Fix PLL con0 register locations and add uart clocks
Disable exyortc for now, it doesn't work.
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
Update for new dwc_mmc driver
Fix dmesg
Add Exynos 5410 clock controller driver.
Fix a few typos in clock parent names for mmc clocks.
From jmcneill@
Update for new dwc_mmc driver
Implement platform reset for exynos5
Attach fdtbus to a /clocks node with no compatible string.
Add support for ARM Power State Coordination Interface (PSCI).
Support interrupt sharing.
Add initial support for Allwinner H3 SoC.
ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF,
U-Boot on some platforms may use SGIs in this range for the PSCI
implementation.
Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert
to ensure that we don't end up with a conflict.
Add H3 MMC support
SD/MMC clock fixes
Add FDT PHY interface.
Add glue for generic ehci/ohci bindings.
Rename a variable, NFC.
Support parents in different clock domains.
Add USB stuff. Doesn't quite work yet.
Synopsys DesignWare APB UART needs "options COM_AWIN" for now.
Add i2c glue.
Add RTC driver.
PHY registers start at index 1. Now USB works.
Don't allow sharing edge and level triggered interrupts.
Add arm_fdt_memory_dump helper for dumping physical addresses from ddb
Print clocks with aprint_debug
Remove unused defines
Add fdtbus_get_string helper
Add of_search_compatible, which searches an array of compat_data structures
for a matching "compatible" entry matching the supplied OFW node. This
allows us to associate data with compatible strings.
Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and
later family SoCs.
This is a port of my FreeBSD driver which has been confirmed to work on
Allwinner H3, A83T, and A64 SoCs.
Fix dmesg
Add basic support for Allwinner A31.
Add basic FDT GPIO support.
Fix the pinctrl api to match the spec. A pinctrl config can have more
than one xref, and an xref may have specifier data associated with it.
Enable sunxi pinctrl support
Adjust to new pinctrl API
Add P2WI/RSB driver, based on awin_p2wi.c.
Fix typo in a compat string.
Configure pin defaults at attach
No need to explicitly set pinctrl config 0 now
Fix some register definitions.
Disallow sharing between MPSAFE and non-MPSAFE handlers.
Add of_match_compat_data.
This routine searches an array of compat_data structures for a
matching "compatible" entry matching the supplied OFW node.
Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP
Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.
the extent code cannot use the full range of u_long,
so ignore the last page before 4GB too. ok jmcneill@
Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
Let the controller provide a default name for pins. This makes pins easier
to locate when we have multiple banks and a variable number of pins per
bank.
Attach gpio(4) to sunxigpio
Test for kernel build directory before reading DTB list
Add support for Allwinner A83T SoC.
Add A83T files
Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints.
Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac
Restore TX_INTERVAL_DEFAULT to 64
Drop the sunxi_emac_rx_batch feature. It was originally designed to
reduce the amount of mutex unlock/lock cycles during the RX path on
FreeBSD and if_input, but it is not required to drop the lock before
calling if_percpuq_enqueue on NetBSD.
Write back the data value instead of mask in sunxi_gpio_write
Add a helper for exposing LED controls via sysctl.
Add GPIO LED driver.
add gpioleds
Add misc. gates and resets driver, and explicitly enable PIO clocks
at attach.
Add fdtbus_get_string_index helper.
Add driver for fixed-factor clocks.
Add ffclock
Remove the requirement for ehci to attach after companion devices.
"go for it" - skrll@
Remove the hack to find companion devices and just assume 1 companion if
ETTF flag is not set.
Remove pass numbers for ehci/ohci now that the attach order no longer matters
Use unsigned char for ctype functions, suggested by christos
Add : to body of populate_sunxi to appease bash.
port-evbarm/52388: Fix number of args to a debug printf.
|
| 1.24.4.7 |
| 18-Jan-2019 |
pgoyette | Synch with HEAD
|
| 1.24.4.6 |
| 26-Nov-2018 |
pgoyette | Sync with HEAD, resolve a couple of conflicts
|
| 1.24.4.5 |
| 20-Oct-2018 |
pgoyette | Sync with head
|
| 1.24.4.4 |
| 30-Sep-2018 |
pgoyette | Ssync with HEAD
|
| 1.24.4.3 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.24.4.2 |
| 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.24.4.1 |
| 22-Mar-2018 |
pgoyette | Synch with HEAD, resolve conflicts
|
| 1.25.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
