PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

This kernel has no midi configured, so comment out pseudo-device sequencer

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.164.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.160.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.157.2; 1.157.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.153.6;
PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.152.2;
Comment out spkr at pcppi, as pcppi is commented out too.

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

mention PAX_SEGVGUARD dependency on FILEASSOC

branches: 1.146.2;
Remove KMEMSTATS.

branches: 1.145.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.141.4;
fix manual section numbering of sysctl.
thanks wiz@

G/C PFIL_HOOKS from the kernel configs.

branches: 1.139.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Disable some not working drivers. (pcppi, spkr, midi)
Disable some not need drivers. (fdc1, bio, raid)

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.131.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.129.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.128.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.127.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.125.2; 1.125.4;
Remove unused count from pseudo-device md.

Enable wss(4) at port 0x82c.
Also enable audio.

Enable INCLUDE_CONFIG_FILE.
Remove NTFS maybe unnecessary.

Move PCI_NETBSD_CONFIGURE to std.bebox. It is MUST REQUIRED.

Add bktr(4). (BeOS seems to have supported BT848. ;)
Remove INSECURE.
Disable options PMS_SYNAPTICS_TOUCHPAD.
Remove mms and lms from majors.bebox.

Support xserver.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.116.2; 1.116.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.112.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.110.2;
Enable siop and scsi bus/devices.

branches: 1.109.2;
Add options COMPAT_40 to files which have options COMPAT_30.

Renewal GENERIC and files.bebox.

branches: 1.107.6; 1.107.8; 1.107.10; 1.107.12;
Remove systrace. Ok core@.

branches: 1.106.2; 1.106.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.105.8; 1.105.10; 1.105.12; 1.105.14;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.104.2; 1.104.8; 1.104.10; 1.104.16; 1.104.18;
Remove tmpfs's experimental status. OK'ed by core@.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.102.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.101.2;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.99.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.98.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.97.2; 1.97.4; 1.97.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.95.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.94.2; 1.94.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

swcr -> swcrypto

"pseudo-device crypto" really refers to the /dev/crypto API to the
opencrypto framework, not the framework itself. Update the comment
accordingly.

Add "pseudo-device swcr" (commented out if "pseudo-device crypto" is also
commented out).

branches: 1.89.2;
turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.83.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

Add attimer(4) configurations everywhere pcppi(4) exists, with the
following rule:
If a pcppi device is enabled for an attachment, enable an attimer for the
same attachement, otherwise comment it.

branches: 1.80.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.75.4; 1.75.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.69.2;
Comment out the rest of the opencrypto bits for now; the bebox port does not yet have generic soft interrupts, which the opencrypto software depends on.

Comment out opencrypto bits for now; the bebox port does not yet have generic soft interrupts, which the opencrypto software depends on.

Add support for opencrypto, PCI accelerators to sys/arch/*/conf/GENERIC
files for machines I know to have genuine PCI slots. As sent to tech-kern
for feedback in December 2003. Based on feedback, opencrypto is commented
out in the macppc GENERIC (due to absense of GENERIC_SOFTINT support),
and added to the sparc64 config (sys/arch/sparc64/conf/GENERIC32).

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

Add esiop at pci to GENERIC which already have siop at pci.
esiop has been tested enouth now.
esiop not added to INSTALL kernels because of possible space constraint.
siop should be able to drive all adapters supported by esiop.

branches: 1.63.2;
Add pseudo-device ksyms.

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.55.2; 1.55.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

The wsmux pseudo device does not need a count anymore.

branches: 1.44.4;
Linux emulation is no longer experimental, removed comment

branches: 1.43.2;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.40.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Use the new pmap to compile again (sorry).

Cosmetic change

Added a comented out COMPAT_LINUX option in GENERIC kernels of PowerPC ports

branches: 1.36.2;
Switch from commented-out ncr* at pci? to commented-out siop* at pci?
Add option PCI_NETBSD_CONFIGURE to cause NetBSD to configure the PCI bus.

Add pseudo-device vlan

more rnd(4).

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Moving to a default of 64 PTYs.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.28.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

branches: 1.27.2;
add stf pseudo interface (commented out due to possible security risks)

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.

Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.

Add commented out "ident"-command

Add overlay to kernel configs.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

branches: 1.19.2; 1.19.8;
Make two wsmux pseudo devices and add mux locators.

It's time to be COMPAT_14.

branches: 1.17.2; 1.17.4;
second round of mouse renaming: psm->pms

Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Support frame buffer console initialized by the BootRom of the BeBox.

Added a (commented out) configuration line for the RAIDframe device driver.

Use UVM by default.

remove options FIFO; it's now the default

Add UVM support.

Use new PowerPC-generic stuff(sys/arch/powerpc).

"spkr" attaches to "pcppi" now.

Change default console. pc -> wscons

Add commented out "options FFS_EI"

Remove MD ed,wdc drivers and Support MI ne,wdc drivers.
Change assembler source suffix.

add com0,com1,com2,com3
comment out wdc0, wd*(temporary)

support IDE hard disk controllers (wdc) and drives (wd)
put wdc.c into bebox/isa directory temporarily

Add COMPAT_13.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

Initial commit of NetBSD/bebox port.

branches: 1.1.2; 1.1.4;
Add experimental support GENERIC.MP.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

branches: 1.2.2; 1.2.8;
Add examples for including the kernel crypto bits from either crypto-us
or crypto-intl, commented out, with instructions to use only one, and
adjust the prefix as necessary.

branches: 1.1.2;
kernel configuration for IPv6/IPsec. should be in GENERIC in the future.
(source code will be committed soon)

bump bebox and prep image sizes for GCC 9.

Remove "options IPKDB", and the other associated options, from the config
files.

ipkdb is being retired. Its code is really old, and hasn't kept pace with
today's expectations: IPv6, SMP, modern NICs. The associated code for x86
was already removed because it was too incorrect to stay.

There are plans to rewrite a similar feature from scratch.

ok kamil christos

Remove "options DEBUG_BY_TOOLS", it doesn't exist.

branches: 1.62.2; 1.62.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.59.2;
wildcard speaker attachments, now that we can handle many of them.

kill PCPPISPEAKER

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.56.2; 1.56.4;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

remove confusing numeric locators where they are unused.

branches: 1.54.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

branches: 1.53.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.52.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.51.8;
Remove unused count from pseudo-device md.

s/BEBOX/BeBox/.
Disable some COMPAT_*-s. And indent.
Disable TMPFS.
Add some options WS*-s.
Add attimer.
Add atapibus and atapi-devices.
Add ukphy.
spkr attached pcppi not pckbd.

Cleanup INSTALL.
+ Enable must required devices. (HDD, NIC, com, vga, genfb and keyboard)
- Disable optional devices. (mouse, lpt...)

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.47.2; 1.47.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Fix some whitespace and indentation. No functional change.

branches: 1.44.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.43.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.42.12; 1.42.14; 1.42.16; 1.42.18;
Remove pccons as it is gone forever.

branches: 1.41.10; 1.41.22; 1.41.24; 1.41.32;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.38.2;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.37.14;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.35.2; 1.35.4; 1.35.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.31.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.28.4; 1.28.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.26.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.23.6;
enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.21.2;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.12.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Remove (commented out) ncr* at pci? lines.

Use the new pmap to compile again (sorry).

branches: 1.9.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.

branches: 1.4.2;
It's time to be COMPAT_14.

branches: 1.3.8;
pcvt is no longer used with bebox.

remove options FIFO; it's now the default

Use new PowerPC-generic stuff(sys/arch/powerpc).

Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.22.2;
Rename assembly files that are pre-processed by cpp to use an S suffix.

define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.

branches: 1.20.2;
delete obsolete comment

Add "install" target, so "make install" after building the kernel
does something useful. The target can be redefined by putting a
install-kernel-${MACHINE_NAME} target that fits your needs into
/etc/mk.conf.

HAVE_GCC28 -> HAVE_EGCS, and make it match gcc 2.9 as well. Also,
make the use of -Wno-uninitialized explicit, don't rely on a compiler
hack to do it for us.

Revert STRIPPROG -> STRIP

Add "dependall" target for comfort.

STRIP -> STRIPPROG

branches: 1.14.2;
be more efficient when doing the SYSTEM_LD_TAIL for -g kernels: don't
copy them just to strip them, use strip -o.

clean up a bit after jason :)

- fix emitrules() like emitfiles() to deal with the prefix (otherwise it
would attempt to find the file in the normal base for the NORMAL_C rule).
- add emitincludes() which adds include directives for each prefix to the
$INCLUDES variable in the makefile.
- add %INCLUDES to each Makefile.arch to deal with the above.

this makes "prefix" actually work in a usable manner, and now i can move
on to fixing compiler warnings (errors) in the ESP code. :)

Comment out MKDEP SFILES. bebox dir has only locore.s.
include bsd.own.mk.

branches: 1.11.4;
Some minor, mostly costmetic, changes to CPPFLAGS/CFLAGS.

Add -Wpointer-arith warning since `void *' arithmetic is not ANSI C.

change handling of libkern:
-sys/lib/libkern builds as library per default (as it was documented all
the time)
-ports able to LKM set "KERN_AS=obj" explicitely in their Makefiles
(for now; should depend on actual "option LKM" or -better- functions
included for LKM use should be pulled in by a stub)
-always link libcompat before libkern - libkern stuff can be referred to
by libcompat, but not the other way

distclean is a synonym for cleandir

Specify a non-profiling C rule.

Use new PowerPC-generic stuff(sys/arch/powerpc).

Add -Wno-main conditional on compiler being gcc 2.8 or egcs. (This adds
a HAVE_GCC28 check-variable that can now be used to add other gcc-2.8
flags in cases where they may be useful, or to remove gcc 2.7.2 "bug
workaround" flags.)

Remove MD ed,wdc drivers and Support MI ne,wdc drivers.
Change assembler source suffix.

Make sure CPP, AR, AS, and RANLIB are defined.

Define LORDER, NM, and TSORT here, like we do the rest of the tools.

branches: 1.1.2;
Initial commit of NetBSD/bebox port.

Add experimental support GENERIC.MP.

branches: 1.56.2; 1.56.12;
Add support pci_intr_setattr.
Export non-inline version of pci api for modules (_MODULE is defined).
Fix definition of pc_conf_hook and pc_conf_interrupt.
Switch to using inlines instead of macros.
Switch ibm4xx to use <powerpc/pci_machdep.h>

Remove unnecessary 'define pckbcport'.

Remove obsolete defflag XSERVER.

branches: 1.53.18; 1.53.20;
Renewal GENERIC and files.bebox.

branches: 1.52.6; 1.52.8; 1.52.10; 1.52.12;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

Remove pccons as it is gone forever.

branches: 1.50.2;
Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.49.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.48.4; 1.48.12; 1.48.14; 1.48.16; 1.48.18;
include files.wsfb

branches: 1.47.6; 1.47.10; 1.47.12; 1.47.14;
Convert bebox to MI todr. As part of this, separate out the mc146818
clock handling. Originally reviewed with that committed as an MI driver
in dev/isa, crazy MD versions of mcclock made that impossible. So for
now I'm only handling it as an MD driver. Ok garbled@

branches: 1.46.20;
merge ktrace-lwp.

branches: 1.45.12;
Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

don't need md timing functions for joystick anymore

Define maxpartitions to the same value as MAXPARTITIONS in disklabel.h.
[Down from 16 to 8, since disklabel.h still says 8.]
Addresses PR 24905 by Simon Burge.

Abstract the interface between pckbc(4), and the pckbd(4) and pms(4)
drivers that attach to it. This allows for other host interface chips
that use the same keyboards and mice, such as the ones in the ARM
IOMD20, ARM7500, and SA-1111. The PC-compatible driver is still
called pckbc(4), and the new abstraction layer is "pckbport", so the
child devices have moved from sys/dev/pckbc to sys/dev/pckbport, which
also contains some code shared between all host controllers. To avoid
incompatibility, pckbdreg.h is still installed in
/usr/include/dev/pckbc.

In theory, this shouldn't cause any behavioural changes in the drivers
concerned. Thy just use rather more function pointers than before. Tested
on i386 and (with a new host driver) acorn32. Compiled on several other
affected architectures.

Add a new MI attribute, pckbc_machdep_cnattach, and change pckbc_cnattach()
to only call pckbc_machdep_cnattach() if this is present. This allows
pckbc_machdep_cnattach() to be omitted entirely on most ports, where it only
returns ENXIO anyway.

The devices with this attribute at the moment are pc(4) on i386 and bebox, and
pckbc on sparc, where pckbc_machdep_cnattach() mysteriously returns 0 rather
than ENXIO.

Make this build properly.

branches: 1.39.2;
Switch/adapt to new bus space infrastructure.

Remove port-specific procfs_machdep.c (since they are all identical and
a better one resides in powerpc/powerpc/).

Moved binary compatibility options from arch directory to cpu directory

now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.34.2;
Remove opms(4) for bebox (superseded by pms(4)).

Approved by christos.

* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

Reduce the massive code duplication regarding joy(4). Split it into
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.

Switch to MI dev/md_root.c for archs which don't have any special
memory disk hooks (i.e. everything except atari).

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.29.4;
Add include dev/wsfont/files.wsfont

Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.27.2;
Add an e_trapsignal member to struct emul, so that emulated processes can
send the appropriate signal depending on the trap type.

Move "file .../bus_dma.c" line to MD place.
Add options PPC_MPC6XX on missed ports.
XXX I think PPC_OEA is better name.

Change bebox port to use the include MPC6XX files and the new common bus.h
framework.

branches: 1.24.2;
Include MII files.

Added previously created files for powerpc Linux compatibility to the kernel
config system

Add machdep file for procfs. Currently only used for linux-style
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.

Pull in dev/i2o/files.i2o.

branches: 1.20.4;
Carve off the ISA configuration bits from the floppy driver. Driver is
still ISA-specific, but we can attach ISA instances with different
configuration mechanisms now.

Use dev/isa/fd.c.

Add the RAIDframe device major to the machine-dependent config files
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)

branches: 1.17.2;
Normalize include paths.

rename pms to opms.

Only declare block major numbers for devices which can be the root device.

branches: 1.14.6;
Support frame buffer console initialized by the BootRom of the BeBox.

pcvt is no longer used with bebox.

ISA PnP goo.

branches: 1.11.2;
Use new PowerPC-generic stuff(sys/arch/powerpc).

VGA and spkr are now MI.

allow use of new wscons code.

Remove "class" declarations, and add "devclass" declarations where
appropriate. Fix several inconsistencies between device class and
attributes. Mostly from Chris Demetriou.

Import memory disk filesystem hook from port-i386.

Remove MD ed,wdc drivers and Support MI ne,wdc drivers.
Change assembler source suffix.

Support bootinfo like i386-port.
-define a buffer for information passed by the bootloader
-add a function ("lookup_bootinfo") to extract data
-use passed console information, for console attachment (VGA or SERIAL)
-use passed clock information, for timebase, decremente register

Update for changes to config.

RCSID Police.

remove/import software interrupt model and external interrupt handler
from OpenBSD/powerpc.
move bus_space_* from bus_machdep.c to bus.h.

branches: 1.1.2;
Initial commit of NetBSD/bebox port.

Remove MD ed,wdc drivers and Support MI ne,wdc drivers.
Change assembler source suffix.

remove 'ata' interface attribute. it now is define in the MI conf/files.

Update for changes to config.

support IDE hard disk controllers (wdc) and drives (wd)
put wdc.c into bebox/isa directory temporarily

use dev/isa/isa.c instead of bebox/isa/isa.c

Garbage-collect definition of "com" driver.

__VM_PMAP_HACK delete.
if_ed and lpt temporary support.

Initial commit of NetBSD/bebox port.

mark nsmb major obsolete

Systematize handling of removed drivers.

- Every driver that was removed and whose number hasn't already been
reused is now listed with a commented-out "obsolete" line.
- The format of these has been systematized. Future format changes can
probably be safely done with a script.
- This does not include a few cases of assignments that only lasted a
couple days, or stuff from before major reorgs. Some of these may
be included nonetheless, because there was a lot of ground to cover
and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

Restore satlink's majors entries commented out and marked obsolete.
Otherwise they might accidentally get reused later and cause a
security problem.

Remove the satlink driver. It was disabled everywhere, had no man page and
no use either. Spotted by thorpej in PR/21345, ok christos.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.26.14; 1.26.16;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.25.12; 1.25.30; 1.25.34;
dependant -> dependent

Add and comment-out obsoleted two devices(mms/lms).
like i386. thanks tsutsui@.

Add bktr(4). (BeOS seems to have supported BT848. ;)
Remove INSECURE.
Disable options PMS_SYNAPTICS_TOUCHPAD.
Remove mms and lms from majors.bebox.

Support xserver.

branches: 1.21.6; 1.21.8;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.20.6; 1.20.10; 1.20.16; 1.20.18;
Remove systrace. Ok core@.

branches: 1.19.24; 1.19.30; 1.19.36;
Remove traces of scd(4), which apparently never actually had a driver in
the tree.

s/independant/independent/, from Zafer.

branches: 1.17.20; 1.17.22;
merge ktrace-lwp.

make VMSWAP optional again.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

defflag VMSWAP.

branches: 1.13.2;
assign major for nsmb(4)

Change reference at bottom from sys/dev/majors to sys/conf/majors to match
reality

add major for 'ses' for archs which have the other scsi devices

add wsfont major to archs which have the other wscons devices

reassing majors for crypto and pf to use the newly defined MI major
range

update the comment - the space for machine-dependant majors
is reduced to 0-143
follows discussion on tech-kern

Add some framework for MI assignment of device majors - add sys/dev/majors
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.

Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.

Follows recent discussion on tech-kern@

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

branches: 1.4.2;
Add ksyms device major.

branches: 1.3.2;
assign majors for raw and cooked cgd's.

branches: 1.2.2;
Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.1.2;
file majors.bebox was initially added on branch gehenna-devsw.

Move PCI_NETBSD_CONFIGURE to std.bebox. It is MUST REQUIRED.

branches: 1.16.24; 1.16.26;
Remove TEXTADDR. We start to 0x100000.

branches: 1.15.2; 1.15.6;
Fix some bugs since ppcoea-renovation.
It status is reach asking boot device now.

branches: 1.14.50; 1.14.56;
merge ktrace-lwp.

include "conf/std".

branches: 1.12.16;
Remove SPILLSTK leftovers.

branches: 1.11.2;
Rename PPC_MPC6XX to PPC_OEA (and any mpc6xx reference to oea).

Perform a rototill of the powerpc code. Mandate use of SPRG0 to store
a pointer to current cpu's cpu_info structure. Use cpu_info for
intstk,intr_depth,still_stk,idle_pcb,curpcb,curlwp,etal even on
non-MULTIPROCESSOR machines. Add common macros GET_CPUINFO and
INIT_CPUINFO to get and initialize the cpu_info struct on startup. Make
ibm4xx use the standard <powerpc/frame.h>. Use IFRAME_xx in ibm4xx
trap_subr.S instead of explicit magic offsets. Move INTSTK and SPILLSTK
to std.<platform>. Change faultbuf to a struct instead of an array.

On MPC6XX cpus, stop using the vector page for temporary space and use
reserved space in cpu_info.

Use a common genassym.cf for all the PPC_MPC6XX ports. Add a makeoptions to
std.foo to indicate the directory to get genassym.cf from. Add an intrframe
to <powerpc/frame.h> and make trap_subr.S use symbolic offsets into it.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.7.6;
Make all powerpc ports use a common Makefile.powerpc (except walnut)
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.

branches: 1.6.2;
Change bebox port to use the include MPC6XX files and the new common bus.h
framework.

branches: 1.5.2;
Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.4.4;
Add

prefix ../gnu/sys
cinclude "conf/files.softdep"
prefix

to all std.* files, so that soft dependencies can be activated using
"options SOFTDEP".

branches: 1.3.8; 1.3.14;
clean up kernel/config files files for machVM lossage.

Use UVM by default.

Use new PowerPC-generic stuff(sys/arch/powerpc).