Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.21.2; 1.21.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.18.6;
PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.17.2;
No audio speaker on emips. Fixes build.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.15.2; 1.15.4;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

branches: 1.12.6;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.11.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

branches: 1.6.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.4.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.3.2;
dependant -> dependent

branches: 1.2.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.1.2; 1.1.4;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.6.2; 1.6.4; 1.6.6;
Don't define wscons options without wscons devices.

Don't define WSDISPLAY_* without wsdisplay.

remove confusing numeric locators where they are unused.

branches: 1.3.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.1.2; 1.1.4; 1.1.8; 1.1.10;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

No reason to create ECOFF kernels for a modern port which have a native
bootloader. (blindly copied from pmax?)

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

Bump ramdisk size slightly to fix the build

branches: 1.5.16;
fix typos in word "otherwise".

branches: 1.4.16;
bump

branches: 1.3.18;
Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

branches: 1.2.12;
more bogus number removal

branches: 1.1.2; 1.1.4; 1.1.8; 1.1.10; 1.1.20;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

move common/bus_dma/ -> dev/bus_dma/

branches: 1.2.2; 1.2.6; 1.2.8; 1.2.18;
Bring emips forward to the new mips world order.

branches: 1.1.2;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

mark nsmb major obsolete

branches: 1.2.54;
dependant -> dependent

branches: 1.1.2; 1.1.4; 1.1.8;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.

branches: 1.1.2; 1.1.4; 1.1.8;
Add support for the Extensible MIPS ("eMIPS") platform. The
NetBSD/emips port runs on Xilinx and Beecube FPGA systems and the
Giano system simulator.

eMIPS is a platform developed at Microsoft Research for researching
reconfigurable computing. eMIPS allows dynamic loading and scheduling
of application-specific circuits for the purpose of accelerating
computations based on the current workload.

NetBSD eMIPS support for NetBSD 4.x was written at Microsoft Research
by Alessandro Forin and Neil Pittman. Microsoft Corporation has
donated full copyright to The NetBSD Foundation.

Platform support for eMIPS is the first part of Microsoft's
contribution. The second part includes the hardware accelerator
framework and will be proposed on tech-kern soon.