More devmap updates

Provide a shared pmap_devmap implementation and convert all pmap_devmap
arrays to use DEVMAP_ENTRY{,_END}

Consistently use vaddr_t as initarm and friends return type.

Makes no difference to binaries except for aarch64 where it's required

Centralise defparam CONSADDR, CONSPEED, CONMODE and CONADDR into
opt_console.h and adjust.

Sprinkle #include "opt_arm_debug.h" where VERBOSE_INIT_ARM is used

Retire ipkdb entirely. The option was removed from the config files
yesterday.

ok kamil christos

branches: 1.13.12; 1.13.14;
Initialise the windows and allow access to PCI Express port 1 first lane.

Allows xhci(4) to attach in the MV78230 based Lenovo ix4-300d

mvpex1 at mvsoc0 unit 4 offset 0x80000-0x81fff irq 62: Marvell PCI Express Interface
pci1 at mvpex1
xhci0 at pci1 dev 1 function 0: vendor 1033 product 0194 (rev. 0x04)
xhci0: interrupting at interrupt pin INTA#
usb3 at xhci0: USB revision 3.0
usb4 at xhci0: USB revision 2.0

branches: 1.12.2;
Add support Marvell Dove.
Also <SoC>_intr_bootstrap() rename to <SoC>_bootstrap(). And SoC init func, getclk into that.

branches: 1.11.2;
add new ethernet driver mvxpe for recent MARVELL's SoC after ARMADA/XP.
this driver supports 'counter mode', and is disabled by default.

ARMADA SoC family has new ethernet controller acceleration mode called
'enhanced mode' or 'counter mode.' it seems that backward compatibility mode
used by if_mvgbe is still working, but the specification of the old mode
is completely disappeared from SoC's reference manual.

I tested the driver using MIRABOX(ARMADA/370).

lookup clock frequencies of ARMADA 370 correctly.

add u-boot argument parser for Marvell ARMADA XP/370.
use 'ethaddr' and 'eth1addr' in u-boot argument to setup MAC address of mvgbe.

branches: 1.8.4; 1.8.8;
support mapping all of memory.
Map memory starting at 0x80000000 and leave 1GB until kernel VM
Make kernel VM size 320MB (avoid loading kernel and i/o section into same
tlb index).

Default comfreq to mvTclk if CONSFREQ is not defined.

Support to check the clock gating for Armada XP in armadaxp.c.
Also move the checking for clock gate of Kirkwood into kirkwood.c.

Move Misc Registers from mvsocreg.h to armadaxpreg.h. These registers only
Armada XP. The misc_base initializes in initarm() instead of mvsoc_bootstrap().

Add defines for MISC registers.

Call some armadaxp functions with MARVLL_INTERREG_PBASE.
And include arm/marvell/armadaxpreg.h instead of evbarm/armadaxp.

branches: 1.2.2; 1.2.4;
Add CVS IDs where appropriate.

Import cleaned up MD parts of Armada XP port.

Compared to what was posted to port-arm, the main difference is that now it uses
arm32_kvminit, arm32_boot, arm32_reboot as advised by nick@.

Obtained from Marvell, Semihalf.

Only ent KERNEL_BASE_EXT when we want to change KERNEL_BASE from its
default of 0x8000_0000

Don't use KERNEL_BASE_EXT where KERNEL_BASE should be instead.

Workaround a as(1) weirdness in armadaxp_start.S

branches: 1.4.16; 1.4.18;
add u-boot argument parser for Marvell ARMADA XP/370.
use 'ethaddr' and 'eth1addr' in u-boot argument to setup MAC address of mvgbe.

branches: 1.3.4; 1.3.8;
Use armv7 instructions. Add ARM_MMU_EXTENDED support.

branches: 1.2.2; 1.2.4;
Add CVS IDs where appropriate.

Import cleaned up MD parts of Armada XP port.

Compared to what was posted to port-arm, the main difference is that now it uses
arm32_kvminit, arm32_boot, arm32_reboot as advised by nick@.

Obtained from Marvell, Semihalf.

Move armadaxpreg.h into arm/marvell.
And add some defines and reorder.

branches: 1.2.2; 1.2.4;
Add support for SDIO on Armada XP.

Add register definitions for Aramada XP.

Obtained from Marvell, Semihalf.