branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

mark nsmb major obsolete

Systematize handling of removed drivers.

- Every driver that was removed and whose number hasn't already been
reused is now listed with a commented-out "obsolete" line.
- The format of these has been systematized. Future format changes can
probably be safely done with a script.
- This does not include a few cases of assignments that only lasted a
couple days, or stuff from before major reorgs. Some of these may
be included nonetheless, because there was a lot of ground to cover
and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

branches: 1.2.4; 1.2.8; 1.2.32; 1.2.34;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

fix spelling mistakes, mainly in comments and log messages.

branches: 1.1.18;
Use .S instead of .s

Use .S instead of .s

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

Create a new header lwp_private.h to contain _lwp_getprivate_fast,
_lwp_gettcb_fast, _lwp_settcb and remove them from mcontext.h, so that:
1. we don't need special hacks to hide them
2. we can include <lwp.h> where needed to get the necessary prototypes
without redefining them locally.

branches: 1.4.36;
Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.3.16; 1.3.18;
fenv for m68k

branches: 1.2.4; 1.2.8; 1.2.10;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

s/from from/from/ in comment.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

Remove cargo-culted '#if 0' code that was designed to produce a
compile-time error if any of the bus_space_*_8 functions was used,
but was documented that it produces a link-time error.

branches: 1.4.4;
s/impliment/implement/ in comment.

Provide PRIxBUSADDR, PRIxBUSSIZE, PRIuBUSSIZE, and PRIxBSH for all arches
to follow arm and (generic) mips.

Reviewed by christos.

branches: 1.2.4; 1.2.8; 1.2.34;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

Revert the CLOCK_FORMAT0 work-around.

Use proper clockframe size for those platforms that require it.

XXX This is a tempory measure, better to fix clock interrupts to take the
common clockframe size.

OK thorpej@.

Largely unify the <machine/cpu.h> headers on the m68k platforms.

Consistently use "intr_depth" as the name of the interrupt depth counter
on m68k platforms.

Make the M68K_MMU_* defines real kernel options, available in opt_m68k_arch.h.
For 68030, 68040, and 68060, infer M68K_MMU_MOTOROLA. For 68010 and 68020, it
must be an explicit option (set in std.${MACHINE} or, in the case of hp300,
inferred from the specific model option).

This platform does not have a loadustp() function.

cpu_need_resched():

- Remove all code that should be MI, leaving the bare minimum under arch/.
- Make the required actions very explicit.
- Pass in LWP pointer for convenience.
- When a trap is required on another CPU, have the IPI set it locally.
- Expunge cpu_did_resched().

- Cleanup for dynamic sysctl:
- Remove unused *_NAMES macros for sysctl.
- Remove unused *_MAXID for sysctls.
- Move CTL_MACHDEP sysctl definitions for m68k into m68k/include/cpu.h and
use them on all m68k machines.

branches: 1.3.14; 1.3.16;
Fix typo "one the" and architecture where appropriate.

branches: 1.2.4; 1.2.8; 1.2.10; 1.2.14;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

Cleanup and clarify the ELFSIZE mess:

We now have 2 variables automatically set in elf_machdep.h:

ARCH_ELFSIZE: the size for userland binaries
KERN_ELFSIZE: the size for the kernel binaries

DB_ELFSIZE has been deleted and KERN_ELFSIZE should have always the
same values DB_ELFSIZE used to have.

In sys/exec_elf.h, if ELFSIZE is not set, it is set to KERN_ELFSIZE
for the kernel and ARCH_ELFSIZE for userland. These defaults should
eliminate the need for most manual ELFSIZE setting.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.2; 1.2.6; 1.2.10;
Use MBR compatible partitioning

branches: 1.1.2;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.1.2; 1.1.18;
fenv for m68k

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

s/static inline/static __inline/g for consistency.

branches: 1.2.4; 1.2.8; 1.2.32;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.3.4;
Consistently define WARN in a way that passes format string checks, i.e.
always uses the same number of arguments as given in the format string.

branches: 1.2.2; 1.2.4;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.1.4;
Create a new header lwp_private.h to contain _lwp_getprivate_fast,
_lwp_gettcb_fast, _lwp_settcb and remove them from mcontext.h, so that:
1. we don't need special hacks to hide them
2. we can include <lwp.h> where needed to get the necessary prototypes
without redefining them locally.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.2.4; 1.2.8; 1.2.32; 1.2.34;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

branches: 1.2.4; 1.2.8; 1.2.32; 1.2.34;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.

branches: 1.2.4; 1.2.8;
Merge riastradh-drm2 to HEAD.

branches: 1.1.2; 1.1.4;
Add stub port for evbcf which has enough to do a distribution build.