Do not call setroot() from MD code and from MI code, which has
unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.

No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().

Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().

Make cpu_rootconf(9) describe the calling order.

branches: 1.10.2; 1.10.8;
Revamp / rework the Atheros MIPS SoC support. Add initial support for the
AR71xx (MIPS 24K core) SoC and the AR9344 (MIPS 74K core) SoC. Force use
of -mips32 for all Atheros kernels. Make code much more common.

Remove clause 3 and 4 from TNF licenses

branches: 1.8.6; 1.8.8; 1.8.10;
Fix headers.

branches: 1.7.28; 1.7.34; 1.7.42;
Defer _spl0() or _splnone() calls (which enable hardware interrupts)
from cpu_configure(9) to cpu_initclocks(9) on mips ports which use
mips3_clockintr.c:mips3_clockintr() (i.e. CPU INT5 clock) to avoid
hardclock(9) before softclock interrupt is initialized in initclocks().
This should be harmless because initclocks() is a part of configure()
in these days and there is no MI function which expects hardware
interrupts between cpu_configure(9) and cpu_initclocks(9).

Disccussed on tech-kern and port-mips.

branches: 1.6.2; 1.6.4; 1.6.6;
This is a boat-load of changes designed to finish parameterizing the
stuff necessary to separate out AR5312 from AR5315. This includes:

1) rework of arbus IRQs, so that IRQs are now seperately specified
as either MISC or CPU irqs
2) move board/chip-specific addresses into chip-dependent file
3) unencumber argpio from ar5312 specifics, using properties to pass
details such as reset-pin and sysled-pin.
4) an option to select which WiSoC is to be configured is provided.

AR5315 support should be forthcoming shortly now.

First pass at cleanup AR5312 WiSoC support to enable better & cleaner
sharing of code with the AR5315, which has many similarities, but many
differences from the AR5312.

No functional change at this time, other than the cpu_model string
(and also sysctl.hw.model node) is changed to reflect the WiSoC cpu
name rather than the identification string in ROM (which tends to not
be very informative.)

branches: 1.4.4;
Import new HAL 0.9.17.2. Approved by sam@

New HAL includes some driver changes to register accesses.
Adds support for WLAN devices on AR5312 family devices.
Adds support 32-bit SPARC ath devices (untested).
ath enabled in SPARC64 GENERIC builds.
This HAL is tested and known to work for i386 PCI devices, SPARC64 PCI devices,
and AR5312 WiSoC devices. MIPS PCI devices appear to be busted (possibly only
on Alchemy hardware, unconfirmed), and cardbus support is untested due to
lack of test hardware.

Please report any new problems with this import to garrett@.

branches: 1.3.2;
integrate kauth.

Remove the devprop API and switch everthing over to the new proplib. Add
a new device_properties() accessor for device_t that returns the device's
property dictionary.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.

Use a common version of cpu.c (mmm removing identical code).

branches: 1.3.20; 1.3.34; 1.3.38;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.2.10;
merge yamt-idlelwp branch. asked by core@. some ports still needs work.

from doc/BRANCHES:

idle lwp, and some changes depending on it.

1. separate context switching and thread scheduling.
(cf. gmcgarry_ctxsw)
2. implement idle lwp.
3. clean up related MD/MI interfaces.
4. make scheduler(s) modular.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8; 1.1.14; 1.1.20; 1.1.26; 1.1.30; 1.1.32; 1.1.38;
Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.

Adjust evbmips_iointr to pass a clockframe pointer and use it for
pwmclock @ voyager.

Suggested by matt@

Hi macallan!

branches: 1.6.12; 1.6.30;
CLeanup machine includes

Revamp / rework the Atheros MIPS SoC support. Add initial support for the
AR71xx (MIPS 24K core) SoC and the AR9344 (MIPS 74K core) SoC. Force use
of -mips32 for all Atheros kernels. Make code much more common.

#include <sys/bus.h> instead of <machine/bus.h>.

Merge forward from matt-nb5-mips64.

branches: 1.2.18; 1.2.22; 1.2.28; 1.2.30;
Remove clause 3 and 4 from TNF licenses

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8; 1.1.14; 1.1.20; 1.1.74; 1.1.76; 1.1.78;
Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.

Move the at-shutdown call to resettodr() from cpu_reboot() to kern_reboot().

It's a small step, but it's a step.

Add some compile time asserts for endianness on boards/systems that
only support a single endianness.

s/reseting/resetting/

switch all ports to use uvm_init.c:uvm_md_init()

uvm_setpagesize() is now subsumed within this funciton.

branches: 1.30.2;
Just cpu_startup_common()

branches: 1.29.6;
use cpu_{g,s}etmodel

branches: 1.28.2; 1.28.4;
Remove reduntant/conflicting common declarations.

branches: 1.27.2; 1.27.6;
CLeanup machine includes

Revamp / rework the Atheros MIPS SoC support. Add initial support for the
AR71xx (MIPS 24K core) SoC and the AR9344 (MIPS 74K core) SoC. Force use
of -mips32 for all Atheros kernels. Make code much more common.

Merge forward from matt-nb5-mips64.

Remove clause 3 (UCB advertising clause) from the University of Utah
copyright. Confirmed by Mike Hibler, mike at cs.utah.edu - thanks!
Also, merge UCB and Utah copyright texts back into one, as they
originally were.

Extra verification by snj@.

branches: 1.23.2; 1.23.4;
Make this compile again.

branches: 1.22.2;
Remove separate mb_map. The nmbclusters is computed at boot time based
on the amount of physical memory and limited by NMBCLUSTERS if present.
Architectures without direct mapping also limit it based on the kmem_map
size, which is used as backing store. On i386 and ARM, the maximum KVA
used for mbuf clusters is limited to 64MB by default.

The old default limits and limits based on GATEWAY have been removed.
key_registered_sb_max is hard-wired to a value derived from 2048
clusters.

branches: 1.21.2;
Merge from matt-nb5-mips64
Merge mips-specific arch files.

- Use uvm_lwp_setuarea() instead of directly setting address to lwp_t::l_addr.
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.

Kill proc0paddr. Use lwp0.l_addr instead.

Remove all declarations of physmem from sys/arch. Add an include of
<sys/systm.h> to the one file that did not already contain it.
This now means that physmem can be changed by updating systm.h and uvm_page.c
(excluding fixing printfs)

Use "defopt MODULAR" in sys/conf/files, and #include "opt_modular.h"
in all kernel sources that use the MODULAR option.
Proposed in tech-kern on 18 Jan 2009.

branches: 1.16.4;
As discussed on tech-kern: mutex_init is too heavyweight for early bootstrap
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

It is not appropriate to call pmf_system_shutdown(9) from
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:

1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.

2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.

I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.

branches: 1.13.2; 1.13.4; 1.13.10;
Replce exec_map with a pool. Proposed on tech-kern@, reviewed by chs@.

branches: 1.12.2;
Remove all initialization of obsolete ci_divisor_recip in
mips struct cpu_info and related macroes.
The member was prepared for a hack in MD microtime(9) implementation
but it has been superseded by MI timecounter(9).

branches: 1.11.2; 1.11.4; 1.11.6;
Fix a typo in a comment.

branches: 1.10.2; 1.10.6;
Fix typo in macro name and comments.

branches: 1.9.2; 1.9.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.8.10;
merge yamt-idlelwp branch. asked by core@. some ports still needs work.

from doc/BRANCHES:

idle lwp, and some changes depending on it.

1. separate context switching and thread scheduling.
(cf. gmcgarry_ctxsw)
2. implement idle lwp.
3. clean up related MD/MI interfaces.
4. make scheduler(s) modular.

branches: 1.7.2; 1.7.4; 1.7.10;
Fix some caddr_t rototill fallout.

Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

branches: 1.5.4;
Initial import of AR2315 support, specifically the Meraki Mini (see
the Meraki web site at http://www.meraki.net/ ) This includes changes
to the AR5312 to make it more conducive to sharing code with the AR5315,
and also includes improved early console support.

All devices including ethernet and wlan interfaces on the Meraki Mini are
functional with this port, _except_ SPI flash, which will be introduced
later.

This port was funded by the Champaign-Urbana Communit Wireless Network
Project (CUWiN).

branches: 1.4.2; 1.4.4; 1.4.6;
First pass at cleanup AR5312 WiSoC support to enable better & cleaner
sharing of code with the AR5315, which has many similarities, but many
differences from the AR5312.

No functional change at this time, other than the cpu_model string
(and also sysctl.hw.model node) is changed to reflect the WiSoC cpu
name rather than the identification string in ROM (which tends to not
be very informative.)

branches: 1.3.4;
Import new HAL 0.9.17.2. Approved by sam@

New HAL includes some driver changes to register accesses.
Adds support for WLAN devices on AR5312 family devices.
Adds support 32-bit SPARC ath devices (untested).
ath enabled in SPARC64 GENERIC builds.
This HAL is tested and known to work for i386 PCI devices, SPARC64 PCI devices,
and AR5312 WiSoC devices. MIPS PCI devices appear to be busted (possibly only
on Alchemy hardware, unconfirmed), and cardbus support is untested due to
lack of test hardware.

Please report any new problems with this import to garrett@.

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8;
Remove declarations for cpu_model[] since it's in <sys/systm.h>.

branches: 1.1.2;
Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.

Merge thorpej-cfargs2.

branches: 1.6.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.5.70;
Merge forward from matt-nb5-mips64.

branches: 1.4.4; 1.4.10; 1.4.86; 1.4.90; 1.4.96; 1.4.98;
KNR->KNF. :-)

Add support for AR5312 on-chip watchdog.
While we're here, fix mainbus so that mainbus doesn't complain about
unconfigured devices, and use the *atheros* mainbus instead of alchemy (doh!)

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8;
Remove rtc, as we don't have one.

branches: 1.1.2;
Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.

Rework evbmips clock architecture to use common clock_subr.h routines.

Additionally, do not fail if no RTC is present, as not all boards have one.

Malta now uses the common dev/ic/mc146818.c code as much as possible, reducing
local "custom" code. These malta changes are *untested*, as I do not have
a Malta board to test with. If someone would please test them and get back to
me, I'd appreciate it!

Initial import of Atheros AR531X SoC support. Currently the onboard ethernet
and serial ports are supported, and the system appears stable with an NFS
mounted root. An earlier version of the code was reviewed by simon@, but it
has since had numerous improvements and cleanups.


At the moment, only AR5312 is known to work, but I suspect AR2313 will work
as well. Later 2315/2316 parts are substantially different, and are not yet
supported. Wifi and Marvell switch support found on some designs are not yet
supported.

Platforms known to include AR5312 include Senao Aries 2 (AP5054) and Netgear
WGU624.

CLeanup machine includes

Revamp / rework the Atheros MIPS SoC support. Add initial support for the
AR71xx (MIPS 24K core) SoC and the AR9344 (MIPS 74K core) SoC. Force use
of -mips32 for all Atheros kernels. Make code much more common.

Use device_t and accessors. Use aprint_*().

branches: 1.4.4; 1.4.34; 1.4.40;
This is a boat-load of changes designed to finish parameterizing the
stuff necessary to separate out AR5312 from AR5315. This includes:

1) rework of arbus IRQs, so that IRQs are now seperately specified
as either MISC or CPU irqs
2) move board/chip-specific addresses into chip-dependent file
3) unencumber argpio from ar5312 specifics, using properties to pass
details such as reset-pin and sysled-pin.
4) an option to select which WiSoC is to be configured is provided.

AR5315 support should be forthcoming shortly now.

Trivial white-space and comment fixup.

First pass at cleanup AR5312 WiSoC support to enable better & cleaner
sharing of code with the AR5315, which has many similarities, but many
differences from the AR5312.

No functional change at this time, other than the cpu_model string
(and also sysctl.hw.model node) is changed to reflect the WiSoC cpu
name rather than the identification string in ROM (which tends to not
be very informative.)

branches: 1.1.4; 1.1.6; 1.1.8;
Add support for AR5312 on-chip watchdog.
While we're here, fix mainbus so that mainbus doesn't complain about
unconfigured devices, and use the *atheros* mainbus instead of alchemy (doh!)