branches: 1.1.2;
hpcmips hpcsh common files are moved to arch/hpc.

branches: 1.1.2; 1.1.8;
add LCD debug routines.

SPEC_PLATFORM is 'defparam' (requires value).

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.3.2; 1.3.8;
- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

branches: 1.2.2; 1.2.4;
sync with platid_gen change.

hpcmips hpcsh common files are moved to arch/hpc.

Added Psion Teklogix NETBOOK PRO entry.

branches: 1.25.2;
Added W-ZERO3 series.

branches: 1.24.4; 1.24.6;
Added XScale PXA270.

branches: 1.23.6;
Backout previous: the license sweep touched these files in error, so
restore the old license.

branches: 1.22.2;
Remove clause 3 and 4 from TNF licenses

branches: 1.21.72;
Add entries for European (ABB), German, French, Scandinavian and Spanish
Jornada 720. Append "(US/UK)" to the default Jornada 720 entry.

Add definition for iPAQ 3900.

branches: 1.19.2; 1.19.4; 1.19.6;
merge ktrace-lwp.

branches: 1.18.10;
Add Compaq Aero 8000 (requested by Linux folks).
Add Jornada 680/690 with Spanish keyboard.

add SH7707 and HP360LX. add HCAJ and HCVJ group for Sharp Telios

add HPW200EC entry.

Rename 680HU (Hungarian) to 680EU (European).
Add entries for French and Scandinavian 680/690.
Spell "HP 620LX" with a space, like HP does.

branches: 1.14.16;
cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.13.6;
add VR4131 and some cpu.
add sigmarion2, MPC-304 and so on.

Upps, 3[16]XX -> H3[16]XX

add iPAQ H3660 (64MB model)

add iPAQ model H3100

branches: 1.9.2;
Define platid for Victor InterLink MP-C303

Add entries of Fujitsu PenCentra series.

- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

add HP Jornada 690 Hungarian, German entry and
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).

branches: 1.5.2;
Add platform id and keymap for CASIO PocketPostPet.

Fix id which appeared twice, which are of HP and CASIO. You get incompatibility
around hpcarm.

add HP Jornada 720, Compaq iPAQ H3600 entry.

branches: 1.2.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

use "rm -f $@ ; ln -s ... $@" instead of "ln -sf ... $@"

branches: 1.4.4;
Renamed platid_search() to platid_search_data() and added new platid_search().
Platid_name() was re-implemented using platid_search().

branches: 1.3.2; 1.3.4;
Don't descent into plantid_gen since
- it's not objdir safe.
- and it's not necessary since up-to-date generated files are
commited to trunk.

Wrap long line.

branches: 1.1.2; 1.1.4;
hpcmips hpcsh common files are moved to arch/hpc.

bootinfo.h, config_hook.h, platid.h are moved to hpc/include

branches: 1.1.2; 1.1.6; 1.1.10;
hpcmips hpcsh common files are moved to arch/hpc.

malloc(9) -> kmem(9)

branches: 1.11.8;
in many device attach paths, allocate memory with M_WAITOK instead of M_NOWAIT
and remove code to handle failures that can no longer happen.

branches: 1.10.30;
Change the queue.3 *_END(&head) macros to NULL. Since we don't have CIRCLEQ
anymore, all the macros expand to NULL anyway, so this improves readability.
Requested by rmind@

convert from CIRCLEQ to TAILQ, remove open coded access.

branches: 1.8.12; 1.8.22; 1.8.26;
Ansify function definitions w/o arguments. Generated with sed.

branches: 1.7.78; 1.7.86; 1.7.92;
merge ktrace-lwp.

__KERNEL_RCSID()

branches: 1.5.6;
remove trailing \n in panic(). approved perry.

BUGFIX: SigmarionII can't resume.
Added config_hook_call_reverse() to call the hardpower hook of CMU
(Vr clock mask unit) before the hardpower hook of MQ200 video controller.

Added new config hook type PCIINTR (handling PCI interrupt).
Added config hook APIs, config_connect, config_disconnect and
config_connected_call.
Supported PCIINTR type event in hpcio.

branches: 1.2.4;
ANSIfy, KNF.

branches: 1.1.2; 1.1.4; 1.1.6;
hpcmips hpcsh common files are moved to arch/hpc.

bootinfo.h, config_hook.h, platid.h are moved to hpc/include

bugfix: OHCI is bus 0, device 12 or 19, function 2 (not 0).

add support for LASER5 L-Router.

Added new config hook type PCIINTR (handling PCI interrupt).
Added config hook APIs, config_connect, config_disconnect and
config_connected_call.
Supported PCIINTR type event in hpcio.

branches: 1.4.4;
ANSIfy, KNF.

branches: 1.3.2;
change BATTERY event order.

add more BATTERY events.

branches: 1.1.2; 1.1.6;
hpcmips hpcsh common files are moved to arch/hpc.

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.9.8; 1.9.14;
Remove clause 3 and 4 from TNF licenses

branches: 1.8.2; 1.8.68; 1.8.70; 1.8.72;
s/u_intN_t/uintN_t/

branches: 1.7.4; 1.7.6;
merge ktrace-lwp.

branches: 1.6.2;
Add const to the name argument of __dbg_bit_print().

__KERNEL_RCSID()

branches: 1.4.10;
Fixed debug print.

branches: 1.3.2;
fix comment.

add LCD debug routines.

branches: 1.1.2;
clean up debug print and configuration.

Fix various typos in comments, log messages and documentation.

centralize setdisklabel(9)

branches: 1.21.34;
fix lossage from disklabel.h merge

branches: 1.20.44; 1.20.54;
Merge vmlocking2 to head.

branches: 1.19.2; 1.19.4; 1.19.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

Merge brelse() changes from the vmlocking branch.

branches: 1.17.2; 1.17.4; 1.17.6; 1.17.8;
It's not a good idea for device drivers to modify b_flags, as they don't
need to understand the locking around that field. Instead of setting
B_ERROR, set b_error instead. b_error is 'owned' by whoever completes
the I/O request.

branches: 1.16.2; 1.16.10; 1.16.12; 1.16.14;
Cast to char* before doing pointer arithmetic.

branches: 1.15.4;
Replace the myriad copies of bounds_check_with_label() with a single MI
version.

Add disk_blocksize(9) so that disk drivers can record the physical
block size of a disk if it is different to DEV_BSIZE. Right now this
simply initialises dk_blkshift and dk_byteshift according to the
supplied block size. This information is used in the MI version of
bounds_check_with_label().

__unused removal on arguments; approved by core.

Add __unused to unused function arguments.

branches: 1.12.2; 1.12.14; 1.12.16;
s/u_intN_t/uintN_t/

branches: 1.11.4; 1.11.6;
merge ktrace-lwp.

branches: 1.10.2;
Constify as -Wcast-qual seyeth.

Overhaul MBR handling (part 1):

<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.

As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.

<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).

amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.

* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).

* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.

* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.

* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.

* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.

installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)

mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.


Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).

Move UCB-licensed code from 4-clause to 3-clause licence.

Patches provided by Joel Baker in PR 22364, verified by myself.

__KERNEL_RCSID()

branches: 1.6.2;
Change bounds_check_with_label() to take a pointer to the disk structure,
rather than the label itself. This paves the way for some future changes.

Change return type of readdisklabel() to const char *
I hope I've found all the correct places!

Nake return values from bounds_check_with_label() conform to the man
page: -1 for error, 0 for EOF, 1 otherwise. Inspired by an OpenBSD commit
message, pointed out by Miod Vallat in private mail.
vax/mba/hp.c: check return value <= 0, not < 0 to be concistent with how
other places handle return values from bounds_check_with_label().

strategy should have an 'r'. Inspired by similar change in OpenBSD.

branches: 1.2.4;
ANSIfy, KNF.

branches: 1.1.2; 1.1.4; 1.1.6;
hpc* common disksubr.c

MI part of kloader moved to dev/kloader.c from arch/hpc/hpc/
dreamcast and playstation2 port are changed to use this.

malloc program/section header table instead of fixed array.
properly terminate tag chain.
add debug print.

As the 2nd stage loader uses simple word-by-word copy, make sure that
destination addresses of page tags are properly aligned.

branches: 1.11.2;
Print bootinfo timezone in decimal. -180 is more readable then 0xffffff4c
(though may be I'm just getting old :).

We may run one page too few during reboot for certain kernel sizes.
Allocate an extra page for the loadable segment to compensate for the
fact that the last tag may be only partially filled.

Pass the symbol table to the new kernel. /dev/ksyms now works after reboot.

We cannot rely on bootinfo to remain valid after the 2nd stage boot
code has copied the new kernel in place, so pass a copy of bootinfo
to the new kernel via "page tags".

Restructure the code to fill "page tags" to make it more generic and
more natural to use (especially in anticipation of ksyms support).

__KERNEL_RCSID()

branches: 1.6.2;
Back out the lwp/ktrace changes. They contained a lot of colateral damage,
and need to be examined and discussed more.

Pass lwp pointers throughtout the kernel, as required, so that the lwpid can
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.

Bump the kernel rev up to 1.6V

move initialization of the "struct pglist" returned by uvm_pglistalloc()
from the calling code into uvm_pglistalloc() itself for consistency
and easier error handling

branches: 1.3.2; 1.3.10;
change define _ -> PRINT

branches: 1.2.2;
add reset method.

separate machine-independent part of kloader.

branches: 1.1.2;
hpcmips hpcsh common files are moved to arch/hpc.

Fix a bunch of cast lvalues.

branches: 1.10.2; 1.10.4; 1.10.6; 1.10.8; 1.10.10;
Hide plutid_dump() under #ifdef PLATID_TEST. Saves space in the
kernel and avoids printf dependency for hpcboot.
While here, constify its first argument.

branches: 1.9.2;
merge ktrace-lwp.

branches: 1.8.2;
Declare platid_name() to return const.
Revert previous kludge, we can return string literal now.

Don't return string literal from a function that is not declared to
return const.

XXX: Kludge for now, I don't want to deal with the fallout, especially
as this code is also compile for Windows CE (hpcboot.exe).

Avoid naming function parameters "platid", there's a global variable
of that name.

Protect __KERNEL_RCSID with #if !defined(_WIN32) for the sake of
hpcboot.exe, that uses this file too. Compiling for WinCE defeats the
logic in cdefs_aout.h.

__KERNEL_RCSID()

branches: 1.3.4; 1.3.20;
ANSIfy, KNF.

Renamed platid_search() to platid_search_data() and added new platid_search().
Platid_name() was re-implemented using platid_search().

branches: 1.1.2; 1.1.4; 1.1.6;
hpcmips hpcsh common files are moved to arch/hpc.

bootinfo.h, config_hook.h, platid.h are moved to hpc/include

branches: 1.6.4;
Renamed platid_search() to platid_search_data() and added new platid_search().
Platid_name() was re-implemented using platid_search().

branches: 1.5.2; 1.5.4;
use _KERNEL_OPT

Add '#if defined(_KERNEL) && !defined(_LKM)' to avoid including
opt_spec_platform.h when you compile standalone program (bootloader).

#include "opt_spec_platform.h"

Add #ifndef _HPC_PLATID_H_.

branches: 1.1.2; 1.1.4;
hpcmips hpcsh common files are moved to arch/hpc.

branches: 1.2.2;
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

hpcmips hpcsh common files are moved to arch/hpc.

Added Psion Teklogix NETBOOK PRO entry.

branches: 1.24.2;
regen.

branches: 1.23.4; 1.23.6;
Regen. (by Added XScale PXA270)

branches: 1.22.6;
Backout previous: the license sweep touched these files in error, so
restore the old license.

branches: 1.21.2;
Remove clause 3 and 4 from TNF licenses

branches: 1.20.72;
Regen.

Regen for iPAQ 3900.

branches: 1.18.2; 1.18.4; 1.18.6;
merge ktrace-lwp.

branches: 1.17.10;
Regen for Compaq Aero 8000 and Jornada 680/690 with Spanish keyboard.

regen.

add HPW200EC entry.

Regenerate after platid.def changes:
Rename 680HU (Hungarian) to 680EU (European).
Add entries for French and Scandinavian 680/690.
Spell "HP 620LX" with a space, like HP does.

branches: 1.13.6; 1.13.22;
regen.

regen

regen

regen

branches: 1.9.2;
Regen.

Add entries of Fujitsu PenCentra series.

- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

add HP Jornada 690 Hungarian, German entry and
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).

branches: 1.5.2;
Add platform id and keymap for CASIO PocketPostPet.

Fix id which appeared twice, which are of HP and CASIO. You get incompatibility
around hpcarm.

add HP Jornada 720, Compaq iPAQ H3600 entry.

branches: 1.2.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

Added Psion Teklogix NETBOOK PRO entry.

branches: 1.24.2;
regen.

branches: 1.23.4; 1.23.6;
Regen. (by Added XScale PXA270)

branches: 1.22.6;
Backout previous: the license sweep touched these files in error, so
restore the old license.

branches: 1.21.2;
Remove clause 3 and 4 from TNF licenses

branches: 1.20.72;
Regen.

Regen for iPAQ 3900.

branches: 1.18.2; 1.18.4; 1.18.6;
merge ktrace-lwp.

branches: 1.17.10;
Regen for Compaq Aero 8000 and Jornada 680/690 with Spanish keyboard.

regen.

add HPW200EC entry.

Regenerate after platid.def changes:
Rename 680HU (Hungarian) to 680EU (European).
Add entries for French and Scandinavian 680/690.
Spell "HP 620LX" with a space, like HP does.

branches: 1.13.6; 1.13.22;
regen.

regen

regen

regen

branches: 1.9.2;
Regen.

Add entries of Fujitsu PenCentra series.

- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

add HP Jornada 690 Hungarian, German entry and
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).

branches: 1.5.2;
Add platform id and keymap for CASIO PocketPostPet.

Fix id which appeared twice, which are of HP and CASIO. You get incompatibility
around hpcarm.

add HP Jornada 720, Compaq iPAQ H3600 entry.

branches: 1.2.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

bzero -> memset

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.2.4; 1.2.126; 1.2.134; 1.2.140;
Renamed platid_search() to platid_search_data() and added new platid_search().
Platid_name() was re-implemented using platid_search().

branches: 1.1.2; 1.1.4; 1.1.6;
hpcmips hpcsh common files are moved to arch/hpc.

branches: 1.2.4;
Renamed platid_search() to platid_search_data() and added new platid_search().
Platid_name() was re-implemented using platid_search().

branches: 1.1.2; 1.1.4; 1.1.6;
hpcmips hpcsh common files are moved to arch/hpc.

Use ${TOOL_AWK} instead of ${AWK} or plain "awk" in make commands.
Pass AWK=${TOOL_AWK:Q} to shell scripts that use awk.

branches: 1.3.126; 1.3.130; 1.3.136;
BUGFIX:
- line number go wrong when directives appear.
- a directives in a pair of {} make syntax error.

branches: 1.2.2;
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

hpcmips hpcsh common files are moved to arch/hpc.

kill sprintf

branches: 1.4.2; 1.4.12; 1.4.16;
fix compile failure.

BUGFIX:
- line number go wrong when directives appear.
- a directives in a pair of {} make syntax error.

branches: 1.2.2;
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

hpcmips hpcsh common files are moved to arch/hpc.

kill sprintf

branches: 1.10.2; 1.10.12; 1.10.16;
fix compile failure.

Ansify function definitions w/o arguments. Generated with sed.

branches: 1.8.2;
Added include <stdlib.h> for exit() function.

branches: 1.7.78; 1.7.86;
merge ktrace-lwp.

__KERNEL_RCSID()

branches: 1.5.2;
Constify second argument of table_getnum().

branches: 1.4.4;
ANSIfy, KNF.

branches: 1.3.2; 1.3.4;
- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

branches: 1.2.2; 1.2.4;
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

hpcmips hpcsh common files are moved to arch/hpc.

fix compile failure.

Fix dump_node() prototype.

branches: 1.3.4;
ANSIfy, KNF.

branches: 1.2.2; 1.2.4; 1.2.6;
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

hpcmips hpcsh common files are moved to arch/hpc.

fix compile failure.

Use "option noyywrap".

branches: 1.4.94; 1.4.100;
de-__P.

branches: 1.3.40; 1.3.52; 1.3.54; 1.3.56;
BUGFIX:
- line number go wrong when directives appear.
- a directives in a pair of {} make syntax error.

branches: 1.2.2;
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

hpcmips hpcsh common files are moved to arch/hpc.

Fixed 8bpp problem of mq200.

branches: 1.1.2; 1.1.4;
bootinfo.h, config_hook.h, platid.h are moved to hpc/include

Change "inline" back to "__inline" in .h files -- C99 is still too
new, and some apps compile things in C89 mode. C89 keywords stay.

As per core@.

branches: 1.6.2; 1.6.4; 1.6.6;
merge ktrace-lwp.

branches: 1.5.10;
Fix comments regarding configration bounaries

branches: 1.4.10;
BUGFIX: SigmarionII can't resume.
Added config_hook_call_reverse() to call the hardpower hook of CMU
(Vr clock mask unit) before the hardpower hook of MQ200 video controller.

Added Vrc4172 USB OHCI for Pencentra 130.

Attached vrkiu at vrc4173bcu.

branches: 1.1.2; 1.1.4;
bootinfo.h, config_hook.h, platid.h are moved to hpc/include

Misc cosmetics. Refix __func__ fallout fixed in previous by
eliminating the temp completely (__func__ is already an array).

This has been sitting in my tree for years, and I forgot to commit it.
Compile-tested by compiling hpcsh GENERIC with options DEBUG.

fix build problem.

branches: 1.9.20; 1.9.22;
Remove clause 3 and 4 from TNF licenses

branches: 1.8.6; 1.8.8; 1.8.10;
__FUNCTION__ -> __func__

branches: 1.7.50; 1.7.60; 1.7.64;
merge ktrace-lwp.

branches: 1.6.2;
Add const to the name argument of __dbg_bit_print().

Add _DPRINTFN.

branches: 1.4.10;
Fixed debug print.

branches: 1.3.2;
add LCD debug routines.

branches: 1.2.2;
add dbg_bit_print_msg define

clean up debug print and configuration.

MI part of kloader moved to dev/kloader.c from arch/hpc/hpc/
dreamcast and playstation2 port are changed to use this.

branches: 1.2.2; 1.2.4; 1.2.20;
add reset method.

separate machine-independent part of kloader.

Hide plutid_dump() under #ifdef PLATID_TEST. Saves space in the
kernel and avoids printf dependency for hpcboot.
While here, constify its first argument.

branches: 1.3.2;
merge ktrace-lwp.

branches: 1.2.2;
Make "name" in struct platid_name const.
Declare platid_name() to return pointer to const.

branches: 1.1.2; 1.1.4; 1.1.20;
bootinfo.h, config_hook.h, platid.h are moved to hpc/include

Added Psion Teklogix NETBOOK PRO entry.

branches: 1.24.2;
regen.

branches: 1.23.4; 1.23.6;
Regen. (by Added XScale PXA270)

branches: 1.22.6;
Backout previous: the license sweep touched these files in error, so
restore the old license.

branches: 1.21.2;
Remove clause 3 and 4 from TNF licenses

branches: 1.20.72;
Regen.

Regen for iPAQ 3900.

branches: 1.18.2; 1.18.4; 1.18.6;
merge ktrace-lwp.

branches: 1.17.10;
Regen for Compaq Aero 8000 and Jornada 680/690 with Spanish keyboard.

regen.

add HPW200EC entry.

Regenerate after platid.def changes:
Rename 680HU (Hungarian) to 680EU (European).
Add entries for French and Scandinavian 680/690.
Spell "HP 620LX" with a space, like HP does.

branches: 1.13.6; 1.13.22;
regen.

regen

regen

regen

branches: 1.9.2;
Regen.

Add entries of Fujitsu PenCentra series.

- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

add HP Jornada 690 Hungarian, German entry and
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).

branches: 1.5.2;
Add platform id and keymap for CASIO PocketPostPet.

Fix id which appeared twice, which are of HP and CASIO. You get incompatibility
around hpcarm.

add HP Jornada 720, Compaq iPAQ H3600 entry.

branches: 1.2.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

Added Psion Teklogix NETBOOK PRO entry.

branches: 1.24.2;
regen.

branches: 1.23.4; 1.23.6;
Regen. (by Added XScale PXA270)

branches: 1.22.6;
Backout previous: the license sweep touched these files in error, so
restore the old license.

branches: 1.21.2;
Remove clause 3 and 4 from TNF licenses

branches: 1.20.72;
Regen.

Regen for iPAQ 3900.

branches: 1.18.2; 1.18.4; 1.18.6;
merge ktrace-lwp.

branches: 1.17.10;
Regen for Compaq Aero 8000 and Jornada 680/690 with Spanish keyboard.

regen.

add HPW200EC entry.

Regenerate after platid.def changes:
Rename 680HU (Hungarian) to 680EU (European).
Add entries for French and Scandinavian 680/690.
Spell "HP 620LX" with a space, like HP does.

branches: 1.13.6; 1.13.22;
regen.

regen

regen

regen

branches: 1.9.2;
Regen.

Add entries of Fujitsu PenCentra series.

- add VR4181 and VR4122 cpu for hpcmips. and regen headers.
- add new option 'options BOOT_STANDALONE'
boot from standalone(not WinCE application) boot loader.
- add new option 'options SPEC_PLATFORM'
statically specify platid in config file.
In BOOT_STANDALONE case,
'options SPEC_PLATFORM=platid_mask_MACH_xxx_yyy',
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy'.
for specify platid in config file statically'
In wince boot case, 'options SPEC_PLATFORM'
and add 'options SPEC_MACH_xxx'&'options SPEC_MACH_xxx_yyy' for
config level size optimization.
XXX: now I working in hpcmips...

add HP Jornada 690 Hungarian, German entry and
my target machines (CASIO Cassiopeia A-55V, HITACHI PERSONA HPW-650PA).

branches: 1.5.2;
Add platform id and keymap for CASIO PocketPostPet.

Fix id which appeared twice, which are of HP and CASIO. You get incompatibility
around hpcarm.

add HP Jornada 720, Compaq iPAQ H3600 entry.

branches: 1.2.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
into hpc/conf/platid.def.

eliminate use of bsd.sys.mk from Makefiles

branches: 1.24.28; 1.24.38; 1.24.44;
Use ${TOOL_AWK} instead of ${AWK} or plain "awk" in make commands.
Pass AWK=${TOOL_AWK:Q} to shell scripts that use awk.

branches: 1.23.4; 1.23.10;
In the for d in ${PROJECT_DIRS} loop fail immediately if
dspgen/config.sh fails.

Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.21.24; 1.21.28; 1.21.48; 1.21.52;
Clean more files generated by eVC3.

branches: 1.20.20; 1.20.22;
merge ktrace-lwp.

branches: 1.19.2;
Cosmetic changes: drop unnecessary final semicolons, consistently use
spaces on both sides of the pipeline operator, indent argument list
continued on the next line.

Refer to WinCE development tools by their official names.

When cleaning, remove hpcboot/res/hpcmenu.aps (created when you browse
resources in eVC3), and libsa/libsa.vcl and libz/libz.vcl.

add WCE101 and WCE200 binary install target.

Ignore errors on some rm -rf's for platforms that aren't quite
POSIX compliant
and return errors on r/o source (FreeBSD) for -rf. Fixes PR#25022

change uuencoded suffix.

branches: 1.13.2;
Convert to usage of UUDECODE_FILES and standardize on filename extension

Use ${HOST_SH} instead of `sh'.

If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

branches: 1.10.16;
SH4 and HD64465(SH4 companion chip) serial console support.

Make it possible for uudecode to be a host tool.

branches: 1.8.2; 1.8.8;
add build number. when 'make uuencode', increment it.

don't install SH4 binary.

don't generate opt_spec_platform.h

generate opt_spec_platform.h.

add SH4 configuration.
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.

branches: 1.3.2;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

more diagnostic message. (SH3)
add framebuffer information (ARM)
fix boot parameter bug. (-b=sd0)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.5.46; 1.5.50; 1.5.70; 1.5.74;
merge ktrace-lwp.

branches: 1.4.16;
Convert to usage of UUDECODE_FILES and standardize on filename extension

branches: 1.3.16;
SH4 and HD64465(SH4 companion chip) serial console support.

branches: 1.2.2; 1.2.8;
add document for developers.

branches: 1.1.2; 1.1.4;
add README.

recompile.

Recompile. Important fixes since the previous version (according to
my archive of commit mail):

Take DST into account when computing bi.timezone offset, so that
NetBSD gets correct time when booted in the summer.

Fix framebuffer address for Jornada 7xx machines, so that you can boot
with layouts other than "Japanese" (which happened to have the
framebuffer address in its entry).

Fix a bug where ksyms were not loaded correctly, which also caused the
kernel to not recognize detached miniroot.

Kludge required memory size calculations to compensate for partially
filled tagged pages, or kernel with certain segment sizes wouldn't
load.

[hpcarm have picked up some of these fixes in hpcboot v14 that was
compiled/committed in the meanwhile, for hpcarm only].

branches: 1.15.8; 1.15.10;
Bump build number as requested by Uwe.

branches: 1.14.4; 1.14.6; 1.14.8; 1.14.10; 1.14.12;
merge ktrace-lwp.

branches: 1.13.12;
recompile.

clean up whitespace.

recompile.

recompile.

recompile.

branches: 1.8.10;
recompile.

recompile

recompile

recompile

Recompile for DoCoMo SigmarionII with eVC 3.0 and H/PC Pro 2.11 SDK.

branches: 1.3.2; 1.3.8;
recompile (by VC6)

branches: 1.2.2;
recompile.

add build number. when 'make uuencode', increment it.

Convert to usage of UUDECODE_FILES and standardize on filename extension

branches: 1.23.10;
recompile.

recompile

recompile

recompile

Recompile for DoCoMo SigmarionII with eVC 3.0 and H/PC Pro 2.11 SDK.

branches: 1.18.2; 1.18.8;
recompile (by VC6)

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

Rebuild after the bootarg change.

recompile.

Rebuild binaries after ELF symbol table support.

setup bootinfo.bi_cnuse at bootloader phase.

add SH4 configuration.
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.

branches: 1.3.2;
regen.

more diagnostic message. (SH3)
add framebuffer information (ARM)
fix boot parameter bug. (-b=sd0)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

recompile.

branches: 1.8.2;
recompile.

Recompile. Important fixes since the previous version (according to
my archive of commit mail):

Take DST into account when computing bi.timezone offset, so that
NetBSD gets correct time when booted in the summer.

Fix framebuffer address for Jornada 7xx machines, so that you can boot
with layouts other than "Japanese" (which happened to have the
framebuffer address in its entry).

Fix a bug where ksyms were not loaded correctly, which also caused the
kernel to not recognize detached miniroot.

Kludge required memory size calculations to compensate for partially
filled tagged pages, or kernel with certain segment sizes wouldn't
load.

[hpcarm have picked up some of these fixes in hpcboot v14 that was
compiled/committed in the meanwhile, for hpcarm only].

branches: 1.6.8; 1.6.10;
Recompile.

branches: 1.5.12; 1.5.24; 1.5.26; 1.5.28; 1.5.30; 1.5.32;
recompile.

recompile.

branches: 1.3.2;
recompile.

recompile.

Convert to usage of UUDECODE_FILES and standardize on filename extension

Convert to usage of UUDECODE_FILES and standardize on filename extension

branches: 1.22.10;
recompile.

recompile

recompile

recompile

Recompile for DoCoMo SigmarionII with eVC 3.0 and H/PC Pro 2.11 SDK.

branches: 1.17.2; 1.17.8;
recompile (by VC6)

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

Rebuild binaries after ELF symbol table support.

setup bootinfo.bi_cnuse at bootloader phase.

add SH4 configuration.
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.

branches: 1.3.2;
regen.

more diagnostic message. (SH3)
add framebuffer information (ARM)
fix boot parameter bug. (-b=sd0)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Recompile. Important fixes since the previous version (according to
my archive of commit mail):

Take DST into account when computing bi.timezone offset, so that
NetBSD gets correct time when booted in the summer.

Fix framebuffer address for Jornada 7xx machines, so that you can boot
with layouts other than "Japanese" (which happened to have the
framebuffer address in its entry).

Fix a bug where ksyms were not loaded correctly, which also caused the
kernel to not recognize detached miniroot.

Kludge required memory size calculations to compensate for partially
filled tagged pages, or kernel with certain segment sizes wouldn't
load.

[hpcarm have picked up some of these fixes in hpcboot v14 that was
compiled/committed in the meanwhile, for hpcarm only].

branches: 1.5.12; 1.5.40; 1.5.42;
recompile.

recompile.

branches: 1.3.2;
recompile.

recompile.

Convert to usage of UUDECODE_FILES and standardize on filename extension

recompile.

branches: 1.1.2;
recompile.

Convert to usage of UUDECODE_FILES and standardize on filename extension

branches: 1.22.10;
recompile.

recompile

recompile

recompile

Recompile for DoCoMo SigmarionII with eVC 3.0 and H/PC Pro 2.11 SDK.

branches: 1.17.2; 1.17.8;
recompile (by VC6)

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

recompile.

Rebuild binaries after ELF symbol table support.

setup bootinfo.bi_cnuse at bootloader phase.

add SH4 configuration.
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.

branches: 1.3.2;
regen.

more diagnostic message. (SH3)
add framebuffer information (ARM)
fix boot parameter bug. (-b=sd0)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Recompile. Important fixes since the previous version (according to
my archive of commit mail):

Take DST into account when computing bi.timezone offset, so that
NetBSD gets correct time when booted in the summer.

Fix framebuffer address for Jornada 7xx machines, so that you can boot
with layouts other than "Japanese" (which happened to have the
framebuffer address in its entry).

Fix a bug where ksyms were not loaded correctly, which also caused the
kernel to not recognize detached miniroot.

Kludge required memory size calculations to compensate for partially
filled tagged pages, or kernel with certain segment sizes wouldn't
load.

[hpcarm have picked up some of these fixes in hpcboot v14 that was
compiled/committed in the meanwhile, for hpcarm only].

branches: 1.5.12; 1.5.40; 1.5.42;
recompile.

recompile.

branches: 1.3.2;
recompile.

recompile.

Convert to usage of UUDECODE_FILES and standardize on filename extension

Recompile. Important fixes since the previous version (according to
my archive of commit mail):

Take DST into account when computing bi.timezone offset, so that
NetBSD gets correct time when booted in the summer.

Fix framebuffer address for Jornada 7xx machines, so that you can boot
with layouts other than "Japanese" (which happened to have the
framebuffer address in its entry).

Fix a bug where ksyms were not loaded correctly, which also caused the
kernel to not recognize detached miniroot.

Kludge required memory size calculations to compensate for partially
filled tagged pages, or kernel with certain segment sizes wouldn't
load.

[hpcarm have picked up some of these fixes in hpcboot v14 that was
compiled/committed in the meanwhile, for hpcarm only].

branches: 1.2.12; 1.2.40; 1.2.42;
recompile.

branches: 1.1.2;
recompile.

Convert to usage of UUDECODE_FILES and standardize on filename extension

branches: 1.4.10;
recompile.

recompile

branches: 1.2.2; 1.2.4;
recompile

recompile

Recompile. Important fixes since the previous version (according to
my archive of commit mail):

Take DST into account when computing bi.timezone offset, so that
NetBSD gets correct time when booted in the summer.

Fix framebuffer address for Jornada 7xx machines, so that you can boot
with layouts other than "Japanese" (which happened to have the
framebuffer address in its entry).

Fix a bug where ksyms were not loaded correctly, which also caused the
kernel to not recognize detached miniroot.

Kludge required memory size calculations to compensate for partially
filled tagged pages, or kernel with certain segment sizes wouldn't
load.

[hpcarm have picked up some of these fixes in hpcboot v14 that was
compiled/committed in the meanwhile, for hpcarm only].

branches: 1.5.12; 1.5.40; 1.5.42;
recompile.

recompile.

branches: 1.3.2;
recompile.

recompile.

Convert to usage of UUDECODE_FILES and standardize on filename extension

branches: 1.1.2; 1.1.40;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.3.8; 1.3.40; 1.3.98; 1.3.102; 1.3.122; 1.3.126;
add SH4 configuration.
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.

branches: 1.2.2;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.2.40; 1.2.98; 1.2.102; 1.2.122; 1.2.126;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.4.8; 1.4.40; 1.4.98; 1.4.102; 1.4.122; 1.4.126;
Add __COMPILER_UINT64__="unsigned __int64" syncing with the change
of arch/mips/include/int_types.h, revision 1.4.

add SH4 configuration.
(SH) don't access SCIF if the Windows CE's COM1 is not connected to SCIF.

branches: 1.2.2;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Use ${AWK} consistently.
G/c unused SED variable.
Trim trailing whitespace.

branches: 1.4.46; 1.4.50; 1.4.70; 1.4.74;
merge ktrace-lwp.

branches: 1.3.12;
use gawk instead of awk.

branches: 1.2.24;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Convert TNF licenses to new 2 clause variant

branches: 1.3.2; 1.3.4;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.2.40; 1.2.98; 1.2.102; 1.2.122; 1.2.126;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.2.40; 1.2.98; 1.2.102; 1.2.122; 1.2.126;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Check in infrastructure for generating project/workspace files for eMbedded
Visual C++ 4 for ARM, SH[34]. Not currently integrated into the 'install'
targets since it's only been tested for ARM; SH targets compile but I have
no hardware to test on. eVC++4 only supports targets of MIPSII, MIPSIV
and MIPS16 so that might not be appropriate for the hpcmips based systems.

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.4;
templates for WindowsCE Embedded Toolkit for Visual C++ 5.0

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

branches: 1.1.2;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Remove clause 3 and 4 from TNF licenses

branches: 1.14.2; 1.14.68; 1.14.70; 1.14.72;
s/u_intN_t/uintN_t/

branches: 1.13.4; 1.13.6;
merge ktrace-lwp.

branches: 1.12.12;
clean up whitespace.

make hpcboot.exe compile on VC5 (H/PC Ver.1.01 for MIPS, H/PC Ver.2.00 for SH).

Add a few calls to UpdateWindow.

G/c unused "hdc" variable.

Add MB_ICONWARNING style to the message box. Use explicit MB_OK.

branches: 1.7.10;
add EditText to "option tab window" for user can put extra options to
kernel. patch by Hirokazu FUKUI <hfukui@sannet.ne.jp>

add run-time detection of Windows CE version.

change debug printf method.

change system information print. remove ExtEscape (WinCE API) test. this was not useful.

branches: 1.3.2; 1.3.8;
KNF.

setup bootinfo.bi_cnuse at bootloader phase.

branches: 1.1.2; 1.1.4;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Remove clause 3 and 4 from TNF licenses

branches: 1.5.74; 1.5.76; 1.5.78;
merge ktrace-lwp.

clean up whitespace.

branches: 1.3.16;
change debug printf method.

branches: 1.2.2; 1.2.8;
setup bootinfo.bi_cnuse at bootloader phase.

branches: 1.1.2; 1.1.4;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Remove clause 3 and 4 from TNF licenses

branches: 1.6.74; 1.6.76; 1.6.78;
merge ktrace-lwp.

set user specified console as default.

clean up whitespace.

branches: 1.3.16;
Deleted unused include files.

branches: 1.2.2; 1.2.8;
code clean up.

branches: 1.1.2; 1.1.4;
bootloader for SH3, SA-1100, TX39, VR41 based Windows CE(2.00 or later)

Remove clause 3 and 4 from TNF licenses

branches: 1.4.74; 1.4.76; 1.4.78;
merge ktrace-lwp.