Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.3.56; 1.3.64;
remove MALLOC_NOINLINE, it doesn't do anything anymore.

branches: 1.2.16; 1.2.20; 1.2.22;
Remove sl, it's already defined in IPAQ.

branches: 1.1.2;
Add config for installation kernel for IPAQ.

branches: 1.1.2; 1.1.4; 1.1.10;
Build install ramdisk kernel for JORNADA720.

Add support kloader(4) for PXA2X0.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.14; 1.1.18;
Added Sharp W-ZERO3 series support.

PMAP_DEBUG has been deleted on arm

branches: 1.83.4;
Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.82.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.80.2; 1.80.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.77.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.75.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.74.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Remove "#options ARMFPE"

branches: 1.68.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.66.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.65.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.63.2; 1.63.4;
Add options P1003_1B_SEMAPHORE.

Remove unused count from pseudo-device md.

Comment out options RTC_OFFSET so that bootinfo->timezone passed by
hpcboot will be used by default.

Added Sharp W-ZERO3 series support.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.58.2; 1.58.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.56.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.54.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.53.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.52.6; 1.52.8; 1.52.10; 1.52.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.51.2; 1.51.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.50.6; 1.50.10;
PR/36234 - Joerg Niendorf -- xi -> xirc

branches: 1.49.2; 1.49.4; 1.49.8; 1.49.10; 1.49.16;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.48.2; 1.48.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Implement pmap_devmap on hpcarm to map I/O registers that are used
in early start-up stage. Change the virtual address for UART #3 to
the physical address in the configuration files.
While here, implement the sa11x0_bs_unmap function.

Reviewed by Toru Nishimura (on port-arm).

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.45.2; 1.45.4; 1.45.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.43.2; 1.43.4; 1.43.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

- Remove options PORTMASTER (not used any code).
- Add (commented out) options DEBUG.
- Add "pseudo-device ksyms".

branches: 1.40.2;
Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.35.2; 1.35.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.31.4; 1.31.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.28.2;
Uppercase CPU, plural is CPUs.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing
SA_SIGINFO work.

branches: 1.24.6;
Added commented out cgd(4)s to GENERIC configs.

enable USERCONF by default; it's small and extremely useful to have available.

Comment out MEMORY_DISK_HOOKS as a workarund for the following problem.
hpcarm has a bug which prevents booting if kernel text+data size exceeds
3.75MB.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.20.2; 1.20.4;
Remove CPU_SA110 option.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Delete option SAIP; nothing tests it.

Eliminate all #ifdef HPCARM, and delete the option.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.11.6;
ipaqlcd attach to ipaqbus

add ipaqbus and ipaqpcic

branches: 1.9.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Extended GPIO address is 0x49000000.

pcmcia support of SA1110

mapping extended GPIOs
iPAQ: Extended GPIOs appears at address 0x41000000

using bus_space_tag for salcd

Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.

branches: 1.3.2; 1.3.4;
Use hardware address for saost.

change com-speed to 19200.
default com-speed of hpcboot are 19200

hpcarm:
kernel for StrongARM-based WinCE PDA machine.

PMAP_DEBUG has been deleted on arm

branches: 1.104.4;
Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.103.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.101.2; 1.101.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Set the relevant options to build a kernel with the necessary components to
support DTrace on the Jornada 710/720 devices.
- Modular
- Built with DTrace hooks and full symbol table

The the MII/PHY section. It's not technically possible for this hardware to run on this system.

branches: 1.97.2; 1.97.4;
Remove KMEMSTATS.

branches: 1.96.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.94.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.93.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Remove "#options ARMFPE"

branches: 1.87.2;
Ensure all WSDISPLAY_COMPAT_USL entries have same comment

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.84.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.83.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.81.2; 1.81.4;
Add options P1003_1B_SEMAPHORE.

Remove unused count from pseudo-device md.

If options RTC_OFFSET is not specified use bootinfo->timezone passed
by hpcboot.exe as well as other hpc* ports. Noticed by uwe@.
Also comment out options RTC_OFFSET=0 lines and note about this
in kernel config files. Tested on WS003SH.

XXX: dup code among pxa2x0_hpc_machdep.c and sa11x0_hpc_machdep.c

add btmagic(4) where other Bluetooth drivers are listed

Added Sharp W-ZERO3 series support.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.75.2; 1.75.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.73.2;
remove esl (KIYOHARA Takashi)

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.70.2; 1.70.4;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.69.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.68.6; 1.68.8; 1.68.10; 1.68.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.67.6;
Add bcsp(4).

branches: 1.66.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.65.2;
Add btbc(4).

branches: 1.64.2; 1.64.10; 1.64.14; 1.64.16; 1.64.18;
Add btuart(4).

branches: 1.63.2;
move devices entry to MD/conf/files.*
catch up to current kernel configuration

Remove tmpfs's experimental status. OK'ed by core@.

Add support for touches on the HP hard icons, mostly copied from hpcsh but
also with support for raw kbd (for X).

No objection on port-hpcarm.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.59.2; 1.59.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Implement pmap_devmap on hpcarm to map I/O registers that are used
in early start-up stage. Change the virtual address for UART #3 to
the physical address in the configuration files.
While here, implement the sa11x0_bs_unmap function.

Reviewed by Toru Nishimura (on port-arm).

Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.56.2; 1.56.4; 1.56.6;
Remove pioc device and all devices that attach to it (were commented out
anyway).

Comment out options DIAGNOSTIC.

Add file-systems TMPFS and UDF, commented out.

Split the Jornada 7xx drivers for the touch-panel, keyboard, lcd control
and power management into multiple files. This removes some dirty hacks
and improves the quality of the code.

- j720kbd.c - keyboard driver
* Converted to use the hpckbd(4) interface.
* Remove the old keymap file since it's no longer used.

- j720lcd.c - lcd brightness/control/power control

- j720pwr.c - power management
* Converted to use the hpcapm(4) interface.
* Fix the battery charge status. The values are non-linear so in order
to display a reasonable charge status we use a few charge points in
a table and interpolate between that.

- j720tp.c - touch-panel driver

- j720ssp.c - SSP port (on the SA-1110)

Many thanks to cube@ and uwe@ for providing useful feedback and reviewing
the changes.

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.50.2; 1.50.4;
Add (commented out) options for color customization.
Enable customized output by default.

branches: 1.49.2;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

- Remove options PORTMASTER (not used any code).
- Add (commented out) options DEBUG.
- Add "pseudo-device ksyms".

branches: 1.46.2;
Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.41.2; 1.41.4;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.37.4; 1.37.6;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.34.2;
Uppercase CPU where appropriate.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing
SA_SIGINFO work.

branches: 1.30.2;
no iic, thus no rtc@iic, thus no todclock@rtc.

Added commented out cgd(4)s to GENERIC configs.

enable USERCONF by default; it's small and extremely useful to have available.

Fix a config mistake for wsmouse

Enable two WSDISPLAY options needed by the X server

Added a commented out J720KBD_LAYOUT option, to show how default keymap can
be changed.

Support jornada720 touchpanel.

Added PHY to the config file so that most PCMCIA ethernet board will work.

Comment out MEMORY_DISK_HOOKS as a workarund for the following problem.
hpcarm has a bug which prevents booting if kernel text+data size exceeds
3.75MB.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.20.2; 1.20.4;
Remove CPU_SA110 option.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Delete option SAIP; nothing tests it.

Eliminate all #ifdef HPCARM, and delete the option.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.11.2;
The wsmux pseudo device does not need a count anymore.

branches: 1.10.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Enable a bunch of PCMCIA network cards. They cannot be tested before
enabling.

Add jornada720 keyboard device.

Remove obsolete BOOTINFO_FB_* workaround.

Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.

Add support for jornada720's framebuffer.

The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.

Add some PCMCIA devices.

branches: 1.3.2; 1.3.4;
Use hardware address for saost.

change com-speed to 19200.
default com-speed of hpcboot are 19200

hpcarm:
kernel for StrongARM-based WinCE PDA machine.

merge ktrace-lwp.

branches: 1.6.4;
Make this include the Jornada 720 config and just change the memory size,
as it is exactly the same otherwise.

Uppercase CPU where appropriate.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

Add COMPAT_16, pointed out by Bryan Vyhmeister.

Add a kernel configuration file for the Jornada 728.

PMAP_DEBUG has been deleted on arm

branches: 1.41.4;
Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.40.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.39.2; 1.39.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

Remove KMEMSTATS.

branches: 1.36.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.34.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.33.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Remove "#options ARMFPE"

branches: 1.27.2;
Ensure all WSDISPLAY_COMPAT_USL entries have same comment

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.24.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.23.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.21.2; 1.21.4;
Add options P1003_1B_SEMAPHORE.

Remove unused count from pseudo-device md.

If options RTC_OFFSET is not specified use bootinfo->timezone passed
by hpcboot.exe as well as other hpc* ports. Noticed by uwe@.
Also comment out options RTC_OFFSET=0 lines and note about this
in kernel config files. Tested on WS003SH.

XXX: dup code among pxa2x0_hpc_machdep.c and sa11x0_hpc_machdep.c

Added Sharp W-ZERO3 series support.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.16.2; 1.16.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.14.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.12.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.11.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.10.6; 1.10.8; 1.10.10; 1.10.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.9.2; 1.9.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.8.6; 1.8.10;
PR/36234 - Joerg Niendorf -- xi -> xirc

branches: 1.7.2; 1.7.4; 1.7.8; 1.7.10; 1.7.16;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.6.2; 1.6.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.5.6;
Implement pmap_devmap on hpcarm to map I/O registers that are used
in early start-up stage. Change the virtual address for UART #3 to
the physical address in the configuration files.
While here, implement the sa11x0_bs_unmap function.

Reviewed by Toru Nishimura (on port-arm).

branches: 1.4.2; 1.4.4; 1.4.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.2.2; 1.2.4; 1.2.6;
Correct cut 'n pasto in comments.

Boots - with serial console - far enough to ask for a root device.

For DDB, generate APCS stack frame so that db_stack_trace_print() works.

XXX
Copy-paste from arm/conf/Makefile.arm.
Convert to ${MACHINE}/conf/Makefile.${MACHINE}.inc.

- Determine KERN_AS automatically depending on whether OPT_MODULAR is
set or not, in the same way as libcompat.

- Specify OPT_MODULAR in the port Makefile instead of KERN_AS.

Now, KERN_AS=library is used for kernels without module(7) for all ports.

OK christos

branches: 1.18.96; 1.18.98;
Register assym.h dependencies.

branches: 1.17.46; 1.17.50; 1.17.56;
merge ktrace-lwp.

branches: 1.16.2;
s/GENASSYM/GENASSYM_CONF/ so we can use "GENASSYM" as the program name.

Add the %MAKEOPTIONSAPPEND token at the end of the file, after the
common Makefile.kern.inc has been included.

branches: 1.14.6; 1.14.10;
add missing protos.

Remove the MACHINE_ARCH assignment.

Roll the rest of the ports over to the new MI kernel build machinery.
Any problems reported by testers have been fixed, and massive
cross-compiling of kernels has shown that any problems that remain
with actually building kernels are not related to this.

Use the generic 32-bit ARM genassym.cf

Allow port-specific Makefile fragments to specify a list of additional
genassym.cf fragments, if desired.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

MACHINE_ARCH == arm on hpcarm.

branches: 1.7.2;
Change defaults for kernel compiles. Default all to USETOOLS?=no and have
the etc Makefile override that by putting USETOOLS into $.MAKEOVERRIDES
This way the default for kernel compiles is still to use the installed
toolchain instead of depending on $TOOLDIR. $TOOLDIR can be used by
simply adding USETOOLS=yes to the command line as usual.

Adjust each ports template to set the default no setting and also pull in
bsd.own.mk if they weren't already to ensure they'll build correctly
with the new toolchain setup.

branches: 1.6.2;
Set MACHINE_ARCH explicitly in Makefiles for which it is constant.
Also, since config(8) now explcitly sets MACHINE, there is no need
to do it here in the Makefile.

Pull in <bsd.own.mk> to get the correct toolchain definitions for
the USE_NEW_TOOLCHAIN case.

Change the start address to load the kernel. We have 768k more free
memory now.

branches: 1.3.2;
Use ld -X instead of -x, to keep local symbols for DDB.

XXX does other arm ports need this change?

define _KERNEL_OPT as well as _KERNEL. we will use this in the future to
get kernel "opt_foo.h" headers, rather than _KERNEL && !_LKM.

branches: 1.1.2; 1.1.4;
hpcarm:
kernel for StrongARM-based WinCE PDA machine.

fix various typos, mainly in comments.

PMAP_DEBUG has been deleted on arm

branches: 1.31.2;
g/c UGEN_BULK_RA_WB which is not a supported option

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.29.2;
Fix typo (s/contoller/controller/).

Fix build error. size locater is gone.
Thanks mrg@.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

remove the 'wd* at umass?' for the non-standardized and rare (extinct?)
In-System Design ATA protocol over Bulk-Only devices from most kernels,
leave only in i386/amd64 ALL; it's unmaintained and likely currently broken,
lack of test hardware makes it impossible to support

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.24.2;
Revert changes that pinned-down i2c parent specs. The i2c subsystem
has been enhanced to make this unnecessary.

Fully specifiy the location of indirectly-configured I2C devices. In
particular, the parent spec must not be wild-carded, as doing so doesn't
work well on systems where more than one I2C bus is present.

branches: 1.22.2;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.17.2;
Remove KMEMSTATS.

branches: 1.16.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.13.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.12.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.6.2;
Ensure all WSDISPLAY_COMPAT_USL entries have same comment

Add support kloader(4) for PXA2X0.

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.2.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.1.2;
Add support for PSIONTEKLOGIX NETBOOK PRO.

Add commented out FONT_DROID_SANS_MONO10x20 option. This enables 80x24
terminal on WVGA models, which is slightly easier on the eyes ;)

PMAP_DEBUG has been deleted on arm

branches: 1.52.2;
g/c UGEN_BULK_RA_WB which is not a supported option

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.50.2;
Fix typo (s/contoller/controller/).

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

remove the 'wd* at umass?' for the non-standardized and rare (extinct?)
In-System Design ATA protocol over Bulk-Only devices from most kernels,
leave only in i386/amd64 ALL; it's unmaintained and likely currently broken,
lack of test hardware makes it impossible to support

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.44.2; 1.44.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.39.2;
Remove KMEMSTATS.

Added drvctl, putter and PUFFS.

branches: 1.37.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.34.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.33.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.27.2;
Rename RT2500USB driver to ural(4) as it was originally in OpenBSD,
as ural(4) and ral(4) do not actually share any code.

Enable ural(4) in hpcarm WZERO3 kernel too, as it will now build.

Fixes PR#43520.

Ensure all WSDISPLAY_COMPAT_USL entries have same comment

Add support kloader(4) for PXA2X0.

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.22.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.21.2;
dependant -> dependent

Split pxa2x0_hpc/wzero3.

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.18.2; 1.18.4;
Add options P1003_1B_SEMAPHORE.

Remove unused count from pseudo-device md.

Enable options COMPAT_16 for old distributed.net client binaries.

Add acphy(4), which can be found with aue(4).

branches: 1.14.2;
Add options PXA2X0_LCD_WRITETHROUGH to improve console speed.

Add atapibus and atapi devices. My USB DVD multi drive requires them.

Add uaudio(4).

Make FONT_VT220L8x16 default for aesthetics.

XXX1: Is it better to use FONT_VT220ISO8x16?
XXX2: Should we change the default font from FONT_BOLT8x16 in MI wsfont.c?

Add upgt(4) for WS003SH/WS004SH internal WLAN.

If options RTC_OFFSET is not specified use bootinfo->timezone passed
by hpcboot.exe as well as other hpc* ports. Noticed by uwe@.
Also comment out options RTC_OFFSET=0 lines and note about this
in kernel config files. Tested on WS003SH.

XXX: dup code among pxa2x0_hpc_machdep.c and sa11x0_hpc_machdep.c

Add several USB Ethernet devices.

Enable options DDB, which is enabled in other kernels.

Set options RTC_OFFSET=-540 since Windows Mobile stores localtime
into the RTC and we can assume most W-ZERO3 users live in JST timezone.

XXX: Probably it would be better to allow a kernel getting RTC_OFFSET value
XXX: via bootinfo set by boot(8) or boot.cfg(5).

Added keypad driver for WS011SH.

branches: 1.4.2;
Added touchpad driver for WS007SH.

Added 2 options for X.

branches: 1.2.2;
The capacity of RAM is decided according to the model.

Added Sharp W-ZERO3 series support.

Add support kloader(4) for PXA2X0.

branches: 1.65.8; 1.65.12;
Added Sharp W-ZERO3 series support.

branches: 1.64.20; 1.64.22;
Merge kernel changes in matt-armv6 to HEAD.

branches: 1.63.6; 1.63.8; 1.63.10;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.61.6; 1.61.20; 1.61.22; 1.61.24; 1.61.30;
move devices entry to MD/conf/files.*
catch up to current kernel configuration

Backout audio changes that crept in (not ready yet).

Add support for touches on the HP hard icons, mostly copied from hpcsh but
also with support for raw kbd (for X).

No objection on port-hpcarm.

branches: 1.58.8; 1.58.10;
Remove majors.arm32.

Put back full majors.hpcarm.

Remove majors.hpcarm.

branches: 1.55.2; 1.55.4; 1.55.6;
Split the Jornada 7xx drivers for the touch-panel, keyboard, lcd control
and power management into multiple files. This removes some dirty hacks
and improves the quality of the code.

- j720kbd.c - keyboard driver
* Converted to use the hpckbd(4) interface.
* Remove the old keymap file since it's no longer used.

- j720lcd.c - lcd brightness/control/power control

- j720pwr.c - power management
* Converted to use the hpcapm(4) interface.
* Fix the battery charge status. The values are non-linear so in order
to display a reasonable charge status we use a few charge points in
a table and interpolate between that.

- j720tp.c - touch-panel driver

- j720ssp.c - SSP port (on the SA-1110)

Many thanks to cube@ and uwe@ for providing useful feedback and reviewing
the changes.

branches: 1.54.2; 1.54.4;
* Improve description header.
* Fix a typo.
* Remove unneeded includes.

branches: 1.53.2;
merge ktrace-lwp.

Use arm/arm32/stubs.c instead of hpcarm/hpcarm/stubs.c to reduce
duplicated code. PR/17346 from Kevin Lo. ok by ichiro@

branches: 1.51.2; 1.51.4;
convert remaining autoconf bus "submatch" functions to use the new
signature (passing locators), and remove some which obviously don't
serve any purpose
(untested, sorry)

Refactor tpcalib and hpc* ports to make tpcalib MI, as discussed on tech-kern.

split StrongArm companion chip (sacc) driver so that we can support
sacc on other platforms than hpcarm (evbarm for example).

codes specific to hpcarm are extracted and moved to hpcarm/dev/.

branches: 1.48.6;
now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Initial APM support (enough to get battery level)

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

make compile "IPAQ"

move sa11x0 to under arch/arm
make compile

Support jornada720 touchpanel.

branches: 1.42.2;
* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

Remove bogus dependency on options HPCARM.

Use the generic ARM procfs_machdep.c

Use the generic ARM process_machdep.c

Use the generic 32-bit ARM setstack.S

Use the common 32-bit ARM setcpsr.S

Use the generic 32-bit ARM fault.c

Discard hpcarm copies of fusu.S and mem.c and use arm/arm32 versions.

Now that there is a generic SA-11x0 CPU sleep routine, use the
shared arm32 cpuswitch.S.

* Share a common vector page between arm26 and arm32.
* Use a common set of exception handlers for all arm32 platforms.
* New FIQ framework based on discussions with Ben Harris, shared
between arm26 and arm32.

- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

Blah, hpcarm also has its own intr.c

Oops, don't use the generic spl.S; hpcarm provides its own.

Move the interrupt-related file declarations into port-specific
config descriptions so that each port choose whether or not to
use it.

The ARM, Ltd. floating point emulator has moved to arch/arm.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.26.4;
Use arm/arm32/vm_machdep.c instead of hpcarm one.

branches: 1.25.2;
Switch hpcarm to common arm32 conf.c ; (small changes to vm_machdep.c to
make it compile under ELF)

add entry of Atmel microcontroller and uda1341 codec

Make hpcarm kernel build after arm/arm32 file move.

ipaqlcd attach to ipaqbus

add ipaqbus and ipaqpcic

branches: 1.20.2;
Add support for jornada720 keyboard and some LCD parameter controls.
The code is somewhat incomplete, but is quite functional.

Merge arm32/dev/bus_space_notimpl.S and hpcarm/hpcarm/bus_space_notimpl.S
into arm/arm/bus_space_notimpl.S. They were identical anyway.

This file has no excuse for being in assembler, but I'll leave that for another
day.

Add support for jornada720's framebuffer.

The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.

Use sys/arch/arm/arm/blockio.S.

Actually, these functions aren't used by hpcarm but is necessary to be
able to link sys/arch/arm/mainbus thing.

Implement generic soft interrupt for hpcarm.

Move "defopt PMAP_DEBUG" into files.arm, since it's used by code in arch/arm.

Move cpufunc stuff from arm32/arm32 to arm/arm. The only change involved is
to add recognition of the SA-1100 and SA-1110 for compatibility with hpcarm
(which is now using this code as well).

Reorder so that basic devices attach first.

Use hpc/hpc/disksubr.c.

branches: 1.11.2;
Add sacc, sacpcic, and sagpcic.

hpcarm/hpcarm/ast.c is no longer.

Move undefined.c from sys/arch/{arm32/arm32,hpcarm/hpcarm} to sys/arch/arm/arm
in preparation for making it usable on arm26 as well.

branches: 1.8.2;
Move compat_13_machdep.c, strstr.c, copystr.S, bcopyinout.S, and
bcopy_page.S to arm/arm32 and remove port-local copies.

Move "options ARMFPE" to files.arm, so generic ARM files can use it.

Remove CPU_* options (they're in files.arm now -- for some reason I missed
this lot in the last commit).

Use MI md_root.c.

Moved the mainbus files to the arm/conf/file.arm from the arm32 and the
hpcarm/conf/files.hpcarm

Repaired a syntax fault in the files.[hpcarm,arm32]

Part 2 of merge.... the dissapearance of mainbus from arm32 and hpcarm;
these parts were a 100% the same and i've included the extensions made by
hpcarm in the tree.
Checked for occurence of MD parts; none found.

hpcarm:
kernel for StrongARM-based WinCE PDA machine.

Add support for PSIONTEKLOGIX NETBOOK PRO.

Add support kloader(4) for PXA2X0.

branches: 1.4.2; 1.4.6;
Split pxa2x0_hpc/wzero3.

branches: 1.3.2;
Added keypad driver for WS011SH.

branches: 1.2.2;
Added touchpad driver for WS007SH.

branches: 1.1.2;
Added Sharp W-ZERO3 series support.

G/C unused over a decade.

Comment out hpcarm/spl.S, which was superseded by arm32/spl.S.

No functional changes; We had two source files for spl.o, but correct
file was chosen by config(1).

branches: 1.1.2; 1.1.4; 1.1.6;
Added Sharp W-ZERO3 series support.

Split pxa2x0_hpc/wzero3.

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.17.8;
mark nsmb major obsolete

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

branches: 1.15.6;
Systematize handling of removed drivers.

- Every driver that was removed and whose number hasn't already been
reused is now listed with a commented-out "obsolete" line.
- The format of these has been systematized. Future format changes can
probably be safely done with a script.
- This does not include a few cases of assignments that only lasted a
couple days, or stuff from before major reorgs. Some of these may
be included nonetheless, because there was a lot of ground to cover
and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.13.16; 1.13.18;
Update device dependency information - the sysmon major device now depends on the sysmon module itself, not on the individual components.

branches: 1.12.12; 1.12.30;
dependant -> dependent

use a MI major number for uhso(4) driver
(requested by mrg)

add major device for usho(4) driver

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.8.6; 1.8.10; 1.8.16; 1.8.18;
Remove systrace. Ok core@.

branches: 1.7.24; 1.7.28; 1.7.34; 1.7.42;
s/independant/independent/, from Zafer.

branches: 1.6.6; 1.6.10; 1.6.12; 1.6.14;
integrate kauth.

add a missing #.

Put back full majors.hpcarm.

A device node for apm is already declared in majors.arm32.

Add entries for all devices.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
Split the Jornada 7xx drivers for the touch-panel, keyboard, lcd control
and power management into multiple files. This removes some dirty hacks
and improves the quality of the code.

- j720kbd.c - keyboard driver
* Converted to use the hpckbd(4) interface.
* Remove the old keymap file since it's no longer used.

- j720lcd.c - lcd brightness/control/power control

- j720pwr.c - power management
* Converted to use the hpcapm(4) interface.
* Fix the battery charge status. The values are non-linear so in order
to display a reasonable charge status we use a few charge points in
a table and interpolate between that.

- j720tp.c - touch-panel driver

- j720ssp.c - SSP port (on the SA-1110)

Many thanks to cube@ and uwe@ for providing useful feedback and reviewing
the changes.

Set VMSWAP_DEFAULT_PLAINTEXT for hpcarm and hpcmips, that suffer from
slow CPU as well as memory shortage.

For hpcsh, this option is already enabled by std.sh3.

branches: 1.8.114;
Add an arm/conf/std.arm file which contains common arm options, initially
just options CPU_IN_CKSUM.

Include std.arm in all arm platform std files.

This should reenable the asm in_cksum code for all arm platforms.

Also remove the now unused in_cksum_arm.S.

branches: 1.7.46; 1.7.50; 1.7.56;
merge ktrace-lwp.

include "conf/std".

branches: 1.5.2; 1.5.18;
Don't need ARM32_PMAP_NEW option any more.

Switch to the new pmap.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.2.4; 1.2.6; 1.2.10;
Big patch for merging common include files of the new hpcarm tree and the old arm32
tree into the new arm substree. All moved files are relinked with a stub that included
the file from the new location; this might be done better later.

hpcarm:
kernel for StrongARM-based WinCE PDA machine.

branches: 1.1.2; 1.1.4; 1.1.6;
Added Sharp W-ZERO3 series support.

branches: 1.1.2; 1.1.4; 1.1.6;
Added Sharp W-ZERO3 series support.