Add commented out FONT_DROID_SANS_MONO10x20 option. This enables 80x24
terminal on WVGA models, which is slightly easier on the eyes ;)

PMAP_DEBUG has been deleted on arm

branches: 1.52.2;
g/c UGEN_BULK_RA_WB which is not a supported option

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.50.2;
Fix typo (s/contoller/controller/).

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

remove the 'wd* at umass?' for the non-standardized and rare (extinct?)
In-System Design ATA protocol over Bulk-Only devices from most kernels,
leave only in i386/amd64 ALL; it's unmaintained and likely currently broken,
lack of test hardware makes it impossible to support

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.44.2; 1.44.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.39.2;
Remove KMEMSTATS.

Added drvctl, putter and PUFFS.

branches: 1.37.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.34.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.33.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.27.2;
Rename RT2500USB driver to ural(4) as it was originally in OpenBSD,
as ural(4) and ral(4) do not actually share any code.

Enable ural(4) in hpcarm WZERO3 kernel too, as it will now build.

Fixes PR#43520.

Ensure all WSDISPLAY_COMPAT_USL entries have same comment

Add support kloader(4) for PXA2X0.

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.22.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.21.2;
dependant -> dependent

Split pxa2x0_hpc/wzero3.

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.18.2; 1.18.4;
Add options P1003_1B_SEMAPHORE.

Remove unused count from pseudo-device md.

Enable options COMPAT_16 for old distributed.net client binaries.

Add acphy(4), which can be found with aue(4).

branches: 1.14.2;
Add options PXA2X0_LCD_WRITETHROUGH to improve console speed.

Add atapibus and atapi devices. My USB DVD multi drive requires them.

Add uaudio(4).

Make FONT_VT220L8x16 default for aesthetics.

XXX1: Is it better to use FONT_VT220ISO8x16?
XXX2: Should we change the default font from FONT_BOLT8x16 in MI wsfont.c?

Add upgt(4) for WS003SH/WS004SH internal WLAN.

If options RTC_OFFSET is not specified use bootinfo->timezone passed
by hpcboot.exe as well as other hpc* ports. Noticed by uwe@.
Also comment out options RTC_OFFSET=0 lines and note about this
in kernel config files. Tested on WS003SH.

XXX: dup code among pxa2x0_hpc_machdep.c and sa11x0_hpc_machdep.c

Add several USB Ethernet devices.

Enable options DDB, which is enabled in other kernels.

Set options RTC_OFFSET=-540 since Windows Mobile stores localtime
into the RTC and we can assume most W-ZERO3 users live in JST timezone.

XXX: Probably it would be better to allow a kernel getting RTC_OFFSET value
XXX: via bootinfo set by boot(8) or boot.cfg(5).

Added keypad driver for WS011SH.

branches: 1.4.2;
Added touchpad driver for WS007SH.

Added 2 options for X.

branches: 1.2.2;
The capacity of RAM is decided according to the model.

Added Sharp W-ZERO3 series support.