virtio(4): Consolidate kernel configs.

No functional change intended.

Leave `# XXX ?' comments where I don't know why the driver in
question is excluded. (Typical reason is that PAGE_SIZE is not 4096
but I didn't investigate -- if you do investigate, please either
update the comment if you determine a reason, or enable the driver if
you don't.)

PR kern/59211: vio9p(4): missing from various GENERICs and MAKEDEVs

Add virtio(4) devices and ld(4) node for qemu.

Ok'ed by skrll@. Tested on qemu 9.1.2.

fix comment syntax

dd summitfb

add hyperfb at uturn
This is a native driver for HCRX cards, with full wscons support
( as in, virtual consoles, fonts, colours, X with hw cursor )
needs testing on anything that isn't a GSC HCRS24Z

branches: 1.44.2;
add gftfb

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Sprinkle some <space><tab> consistency

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.37.4;
add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.36.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove uyap, USB YAP phone firmware loader.

And the associated ezload EZ-USB code, which is only used by uyap.
It could theoretically be used by other drivers, but none of them are
in tree.

I suspect that this device isn't in use, as phone technology has improved
a lot since 2001 when uyap(4) was added to the tree.

Proposed with no objections on netbsd-users on 13 April 2020

Enable modules

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

Retire "le* at pci?" from the shipped kernel configs:
- If the config had both an le@pci and a pcn, simply remove le@pci
(pcn would match at a higher priority anyway).
- If the config had le@pci enabled, but no pcn, change le@pci to pcn.
- If the config had le@pci commented out, but no pcn, change le@pci
to pcn and leave it commented out.

The pcn driver supports more chips than le@pci and does DMA directly
to/from mbufs rather than memory copies.

Remove FDDI support.

Remove HIPPI support and the esh(4) driver that uses it. There have not
been any users of HIPPI for some time, and it is unlikely to be resurrected.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.27.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Trailing whitespace

Remove references to COMPAT_OSF1 in HPPA, it has never been supported on
this architecture.

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

Remove references to "lmc" in the kernel configurations.

remove the 'wd* at umass?' for the non-standardized and rare (extinct?)
In-System Design ATA protocol over Bulk-Only devices from most kernels,
leave only in i386/amd64 ALL; it's unmaintained and likely currently broken,
lack of test hardware makes it impossible to support

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.18.2; 1.18.4;
Typos.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

there is no netbsd 17

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.12.2;
rename u3ginit driver to umodeswitch

wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.8.2;
Disable uscanner in all kernel configs

As discussed on current-users@, SANE uses ugen via libusb and not
uscanner, so users are not well served by having uscanner. Consensus
is that addressing how to adjust permissions for scanners should not
block restoring basic functionionality.

(Compile-tested only, but there are multiple reports of this being the
right approach.)

Remove KMEMSTATS. Normally it's ok now.

branches: 1.6.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Missing midi attachment.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

branches: 1.2.2;
Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.1.4; 1.1.6; 1.1.8;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

branches: 1.1.4; 1.1.6; 1.1.10;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

introduce new GCC 12 warning disables and use them in a few places

this introduces 4 new warning disable flags:

CC_WNO_MISSING_TEMPLATE_KEYWORD
CC_WNO_REGISTER
CC_WNO_STRINGOP_OVERREAD
CC_WNO_ARRAY_BOUNDS

and documents them in README.warnings. of these, the string op
and array bounds are both problematic (real bugs) and also spurious
(not real bugs), and the other 2 are mostly temporary for older
3rd party code.

add some new uses of CC_WNO_STRINGOP_OVERFLOW.

fix m68k build for gallium and GCC 12.

(Re)Enable -Werror=array-bounds.

enable -Wno-error=array-bounds for GCC 9 and hppa. machdep.c has a
bunch of warnings that i can't workaround yet.

- Determine KERN_AS automatically depending on whether OPT_MODULAR is
set or not, in the same way as libcompat.

- Specify OPT_MODULAR in the port Makefile instead of KERN_AS.

Now, KERN_AS=library is used for kernels without module(7) for all ports.

OK christos

branches: 1.5.16; 1.5.18;
spmath.o is an MD library, not an MD object.

Define ${LINKSCRIPT} in one place.

Use ${KERNLDSCRIPT}.

branches: 1.2.2;
Use LINKSCRIPT.

branches: 1.1.4; 1.1.6; 1.1.10;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

bump

bump for gcc8

branches: 1.2.4; 1.2.6; 1.2.10; 1.2.36;
Bump MEMORY_DISK_ROOT_SIZE

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

defflag STI_PCI_DEBUG

files.hppa: Nix trailing whitespace.

No functional change intended.

add summitfb

first shot at a native driver for HCRX cards
this will give you a fully working wsdisplay in 8bit colour living in the
overlay planes, X/wsfb will also work.
No acceleration or cursor sprite support yet.

branches: 1.25.2;
crude beginning of a native driver for PCI Visualize EG cards
so far it supports:
- colour
- virtual consoles
todo:
- mmap
- hardware acceleration
- STI refactoring

allow com at dino to actually attach

make process_machdep.c included always since it provides register i/o used by
sys_process_getlwpstatus.c which is always included.

harmonize process_machdep.c inclusion.

Merge isaki-audio2 branch, the overhaul of audio subsystem.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly. Improve halfduplex support.
- Many bugs are fixed including deadlocks, resource leaks, abuses, etc.
- Simplify audio filter mechanism. The encoding/channels/frequency
conversions are completely handled in the upper layer. So the hard-
ware driver only converts its hardware encoding (if necessary).
- audio_hw_if changes:
- Obsoletes query_encoding and add query_format instead.
- Obsoletes set_params and add set_format instead.
- Remove drain, setfd, mappage.
- The call sequences are changed.
- ioctl AUDIO_GETFD/SETFD, AUDIO_GETCHAN/SETCHAN are obsoleted.
- ioctl AUDIO_{QUERY,GET,SET}FORMAT are introduced.
- cleanup config attributes: au*conv and mulaw.
- All hardware drivers should follow it (I've done as much as possible).

Some file paths are changed:
- dev/audio.c -> dev/audio/audio.c (rewritten)
- dev/audiovar.h -> dev/audio/audiovar.h
- dev/audio_dai.h -> dev/audio/audio_dai.h
- dev/audio_if.h -> dev/audio/audio_if.h
- dev/audiobell.c -> dev/audio/audiobell.c
- dev/audiobellvar.h -> dev/audio/audiobellvar.h
- dev/mulaw.[ch] -> dev/audio/mulaw.[ch] + dev/audio/alaw.c

branches: 1.20.2;
dino depends on gedoens

Remove references to COMPAT_OSF1 in HPPA, it has never been supported on
this architecture.

branches: 1.18.22; 1.18.30;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

branches: 1.17.2; 1.17.4;
Hook in ipifuncs.c

branches: 1.16.10; 1.16.14;
Add a "mach frame" command to hppa ddb.

branches: 1.15.6;
Make the emulations, exec formats, coredump, NFS, and the NFS server
into modules. By and large this commit:

- shuffles header files and ifdefs
- splits code out where necessary to be modular
- adds module glue for each of the components
- adds/replaces hooks for things that can be installed at runtime

branches: 1.14.2; 1.14.8; 1.14.10;
Whitespace.

Split the DDB trace stuff into its own file.

branches: 1.12.2;
Need to pull in kobj_machdep.c for options MODULAR

branches: 1.11.6;
Catch up with "Refactor in_cksum/in4_cksum/in6_cksum implementations".

Hi Joerg.

Refactor in_cksum/in4_cksum/in6_cksum implementations:
- All three functions are included in the kernel by default.
They call a backend function cpu_in_cksum after possibly
computing the checksum of the pseudo header.
- cpu_in_cksum is the core to implement the one-complement sum.
The default implementation is moderate fast on most platforms
and provides a 32bit accumulator with 16bit addends for L32 platforms
and a 64bit accumulator with 32bit addends for L64 platforms.
It handles edge cases like very large mbuf chains (could happen with
native IPv6 in the future) and provides a good base for new native
implementations.
- Modify i386 and amd64 assembly to use the new interface.

This disables the MD implementations on !x86 until the conversion is
done. For Alpha, the portable version is faster.

Remove COMPAT_HPUX.

branches: 1.8.2; 1.8.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.7.10;
Remove leftover netns stuff.

merge yamt-idlelwp branch. asked by core@. some ports still needs work.

from doc/BRANCHES:

idle lwp, and some changes depending on it.

1. separate context switching and thread scheduling.
(cf. gmcgarry_ctxsw)
2. implement idle lwp.
3. clean up related MD/MI interfaces.
4. make scheduler(s) modular.

branches: 1.5.2; 1.5.6; 1.5.8; 1.5.14;
Merge newlock2 to head.

branches: 1.4.20;
merge ktrace-lwp.

branches: 1.3.16;
update for LWPs, and some lite cleanup.

branches: 1.2.2; 1.2.4; 1.2.10;
Added some missing files.

Added files to support generic HP PA-RISC based machines. hp700-specific
files to follow.

.init/.fini/.ctors/.dtors should be irrelevant to kernels.

branches: 1.1.4; 1.1.6; 1.1.10; 1.1.12;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

Add virtio(4) devices and ld(4) node for qemu.

Ok'ed by skrll@. Tested on qemu 9.1.2.

branches: 1.4.28;
mark nsmb major obsolete

branches: 1.3.18;
Use the MI usb majors

Update device dependency information - the sysmon major device now depends on the sysmon module itself, not on the individual components.

branches: 1.1.4; 1.1.6; 1.1.10; 1.1.12;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

branches: 1.1.4; 1.1.6; 1.1.10;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.