Fix target 'tags'.

branches: 1.3.16; 1.3.22;
Use ${TOOL_SED} instead if plain sed in Makefiles.

branches: 1.2.74; 1.2.78; 1.2.84;
merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Remove port-acorn26

OK core@

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Garbage-collect the "base_year_is_2000" property and associated
DSRTC_YEAR_START_2K config option (only used by Iyonix GENERIC).
Instead, set the "start-year" property to 2000 as needed (matches
the property name in the Devicetree RTC bindings used for the same
purpose).

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

PMAP_DEBUG has been deleted on arm

Trailing whitespace

branches: 1.109.2;
remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.107.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Make this config resemble an Iyonix as they actually shipped:
- add more onboard and standard devices ( dsrtc, ehci, etc. )
- remove lots of unused and commented out drivers
- add some useful filesystems like procfs etc.

Remove references to "lmc" in the kernel configurations.

remove the 'wd* at umass?' for the non-standardized and rare (extinct?)
In-System Design ATA protocol over Bulk-Only devices from most kernels,
leave only in i386/amd64 ALL; it's unmaintained and likely currently broken,
lack of test hardware makes it impossible to support

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Retire NDIS. It appears that it has never worked, after 13 years it was
still marked as "experimental", and nowadays it may be one more obstacle
to MPification of the network stack.

Discussed on tech-net@.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.97.2; 1.97.4;
Alternate buffer queue strategies no longer considered experimental, update
or add new description for files missed out in the previous run.

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.93.8;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

mention PAX_SEGVGUARD dependency on FILEASSOC

branches: 1.89.2;
Remove KMEMSTATS. Normally it's ok now.

branches: 1.88.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Reorganize symbol table embedding. The existing option SYMTAB_SPACE is
replaced by the make option COPY_SYMTAB set to any value. The copy of
the symbol table is no longer put into a buffer in kern_ksyms.o, but a
small helper object. This object is build first with a dummy size, then
the kernel is linked to compute the real dimension of the symbol table
buffer. After that, the helper object is rebuild and the kernel linked
again.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.83.2;
Add COMPAT_NETBSD32, following the switch to eabi by default.

branches: 1.82.2;
fix manual section numbering of sysctl.
thanks wiz@

bump SYMTAB_SPACE

G/C PFIL_HOOKS from the kernel configs.

branches: 1.79.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.72.2;
Rename RT2500USB driver to ural(4) as it was originally in OpenBSD,
as ural(4) and ral(4) do not actually share any code.

Enable ural(4) in hpcarm WZERO3 kernel too, as it will now build.

Fixes PR#43520.

Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.68.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.67.2;
Bump SYMTAB_SPACE

Bump SYMTAB_SPACE so that the symbol table fits again.

Bump SYMTAB_SPACE so that it fits again.

Enable or note aubtfwl(4) wherever ubt(4) is enabled or noted.

Bump SYMTAB_SPACE.

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.61.2; 1.61.4;
Remove unused count from pseudo-device md.

add btmagic(4) where other Bluetooth drivers are listed

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.58.2;
add uhso(4) device where appropriate
- follow the lead of other USB driver declarations wrt commented out
- (cross-)build tested all these kernels

branches: 1.57.2;
unifdef -D UGEN_BULK_RA_WB

Default behaviour unchanged, the feature must still be explicitly
enabled for a ugen fd.

Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

* Increase symtab space so the kernel builds again.
* Add in bits and pieces to get a genfb console going.

add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.51.2; 1.51.4;
Remove references to non-existant kernel option NO_TSC_TIME.
This fixes PR port-i386/39460 by Juan RP.

Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.48.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.47.6; 1.47.8; 1.47.10; 1.47.12;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

Remove systrace. Ok core@.

branches: 1.45.6;
Add bcsp(4).

branches: 1.44.2;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.42.2; 1.42.6;
Comment-out 'slhci at pcmcia' because comment-outed for the pcmcia.

Add slhci at pcmcia.
And reorder.

Add btbc(4).

branches: 1.39.4; 1.39.6; 1.39.8;
Add zyd(4).

Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

sync with sys/arch/i386/conf, enable some USB devices

Bump SYMTAB_SPACE so that the contents fits again.

branches: 1.35.6;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.34.2; 1.34.4; 1.34.8; 1.34.10; 1.34.12;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.33.2; 1.33.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

s/adpater/adapter/

Prompted by PR/34195

branches: 1.30.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.29.6;
Give it 10000 bytes more SYMTAB_SPACE, so that it fits again.

branches: 1.28.2; 1.28.4;
Nuke reference to root on rtk0. Default to root on ?

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.25.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.24.2; 1.24.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Bump SYMTAB_SPACE so that it fits again.

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

remove "dev" locators from cardbus device definitions, it doesn't
make sense technically and might be removed

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

Add (commented out) ucycom to various kernel configs.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.11.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

Remove attachment for the piixide(4) driver from all non-x86 kernel
configurations because Intel IDE disk controllers only exist as part
of Intel chipsets for x86 systems.

Add ukyopon(4).

branches: 1.8.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.4.4; 1.4.6;
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Add COMPAT_BSDPTY to the rest of the config files.

s/uax/axe/

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.3.10; 1.3.12; 1.3.14; 1.3.20;
include files.wsfb

branches: 1.2.26; 1.2.30; 1.2.32;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

get rid of homegrown pci_conf_hook(), use the mechanism from arm32_pci_chipset
instead
less difference to evbarm

branches: 1.7.2; 1.7.4;
G/C ARM32_NEW_VM_LAYOUT

Add an arm/conf/std.arm file which contains common arm options, initially
just options CPU_IN_CKSUM.

Include std.arm in all arm platform std files.

This should reenable the asm in_cksum code for all arm platforms.

Also remove the now unused in_cksum_arm.S.

branches: 1.5.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.4.6; 1.4.10;
Implement ATU Direct Window in order to increase available PCI address
space.

branches: 1.3.26; 1.3.30; 1.3.32; 1.3.38;
merge ktrace-lwp.

include "conf/std".

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Rename sljitarch.h to sljit_machdep.h.

Add sljit support to arm.

branches: 1.9.8;
This change arm, armeb, earm, earmeb, earmhf, earmhfeb so all builds that
share a MACHINE_ARCH for userland so that except for etc, will produce
identical sets.

usr/include/machine now points to usr/include/arm

Don't install fp.h anymore

branches: 1.7.2; 1.7.12;
On ARM-ish ports having PCI support, use new-style <sys/bus.h>. Do not
install <machine/bus.h>. Remove various <machine/bus.h> sources.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.4.20; 1.4.24; 1.4.30; 1.4.36;
Merge newlock2 to head.

branches: 1.3.4;
don't install <machine/db_machdep.h>, this is kernel only

branches: 1.2.4; 1.2.8;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

G/C arm/atomic.h

branches: 1.2.36;
merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.4.34; 1.4.44;
Remove clause 3 and 4 from TNF licenses

branches: 1.3.68; 1.3.70; 1.3.72;
* Read the Machine ID from flash
* Determine the MAC address for the onboard Ethernet from the Machine ID
* Use device properties to pass the MAC address into the wm driver

branches: 1.2.2; 1.2.4; 1.2.6;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Use <arm/bootconfig.h>.

branches: 1.3.20; 1.3.22;
merge ktrace-lwp.

branches: 1.2.2;
Adapt to changed signature of the arm get_bootconf_option() (adds a const).

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

On ARM-ish ports having PCI support, use new-style <sys/bus.h>. Do not
install <machine/bus.h>. Remove various <machine/bus.h> sources.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Per discussion at
<http://mail-index.netbsd.org/tech-kern/2010/04/02/msg007941.html>,
divide each machine's bus.h into bus_defs.h (constants & data types)
and bus_funcs.h (macro implementations of bus_space(9) routines and MD
prototypes).

Note that some bus_space(9) routines' implementation will move to .c
files from inline subroutines or macros in .h files.

I've only made the split for machine architectures where there is PCI.
All of the non-PCI-having architectures will require a similar split.

These #include files are not referenced by any (committed) Makefiles or
header files, yet. Changes to Makefiles, to <sys/bus.h>, and to some
more machine-dependent files will dribble in before I throw the switch.

Per discussion at
<http://mail-index.netbsd.org/tech-kern/2010/04/02/msg007941.html>,
divide each machine's bus.h into bus_defs.h (constants & data types)
and bus_funcs.h (macro implementations of bus_space(9) routines and MD
prototypes).

Note that some bus_space(9) routines' implementation will move to .c
files from inline subroutines or macros in .h files.

I've only made the split for machine architectures where there is PCI.
All of the non-PCI-having architectures will require a similar split.

These #include files are not referenced by any (committed) Makefiles or
header files, yet. Changes to Makefiles, to <sys/bus.h>, and to some
more machine-dependent files will dribble in before I throw the switch.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Make all ports use a common disklabel.h with MAXPARTITIONS set to 16.
Only RAW_PART varies between ports.

branches: 1.4.2; 1.4.12;
Add getlabelusesmbr(), as proposed in
http://mail-index.netbsd.org/tech-userlevel/2011/08/25/msg005404.html
This is used by disk tools such as disklabel(8) to dynamically decide is
the undelyling platform uses a disklabel-in-mbr-partition or not
(instead of using a compile-time list of ports).
getlabelusesmbr() reads the sysctl kern.labelusesmbr, takes its value from the
machdep #define LABELUSESMBR.
For evbmips, make LABELUSESMBR 1 if the platform uses pmon
as bootloader, and 0 (the previous value) otherwise.

merge ktrace-lwp.

Make disklabel(8) and fdisk(8) into "host tools " last step: build
and install ${TOOLDIR}/bin/${MACHINE_GNU_PLATFORM}-disklabel,
${TOOLDIR}/bin/${MACHINE_GNU_PLATFORM}-fdisk by "reaching over" to
the sources in ${NETBSDSRCDIR}/sbin/{disklabel fdisk}/.

To avoid clashes with a build-host's header files, especially on
*BSD, the host-tools versions of fdisk and disklabel search for
#includes such as disklabel.h, disklabel_acorn.h, disklabel_gpt.h,
and bootinfo.h in a new #includes namespace, nbinclude/. That is,
they #include <nbinclude/sys/disklabel.h>, <nbinclude/machine/disklabel.h>,
<nbinclude/sparc64/disklabel.h>, instead of <sys/disklabel.h> and
such. I have also updated the system headers to #include from
nbinclude/-space when HAVE_NBTOOL_CONFIG_H is #defined.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Remove FPA specific header.

branches: 1.2.112; 1.2.122;
merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Don't remove the _LKM #ifdefs, but do s/_LKM/_MODULE/

unifdef -U_LKM

Remove unused __NEWINTR defines

branches: 1.9.34;
Merge kernel changes in matt-armv6 to HEAD.

branches: 1.8.14; 1.8.16; 1.8.18;
Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.7.2; 1.7.16; 1.7.18; 1.7.20; 1.7.26;
Make ipl_t and ipl_cookie_t 8-bit values. kmutex is now down to 12 bytes
(from 20) on ARM.

Approved by Matt Thomas.

branches: 1.6.2;
Remove spllowersoftclock() and CLKF_BASEPRI(), and always dispatch callouts
via a soft interrupt. In the near future, softclock will be run from process
context.

merge yamt-splraiseipl branch.

- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.

branches: 1.4.18; 1.4.20;
implement splraiseipl() for the following ports.
evbarm, iyonix, cats, netwinder, acorn26

reviewed by Bill Studenmund.

branches: 1.3.2;
Remove leading __ from __(const|inline|signed|volatile) -- it is obsolete.

merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.2.46; 1.2.50; 1.2.56; 1.2.64;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Don't have a duplicate joystick.h. Just include sys/joystick.h like all
other platforms

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

branches: 1.1.4;
Create a new header lwp_private.h to contain _lwp_getprivate_fast,
_lwp_gettcb_fast, _lwp_settcb and remove them from mcontext.h, so that:
1. we don't need special hacks to hide them
2. we can include <lwp.h> where needed to get the necessary prototypes
without redefining them locally.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

branches: 1.2.4;
Merge newlock2 to head.

branches: 1.1.2;
file mutex.h was initially added on branch newlock2.

branches: 1.1.2; 1.1.6;
Add a few missing netbsd32_machdep.h files

Patterned after the other ports, define _MACHINE and MACHINE before
including <arm/arm32/param.h>. Fixes build problem for rump.

branches: 1.2.50; 1.2.70; 1.2.74;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

get rid of homegrown pci_conf_hook(), use the mechanism from arm32_pci_chipset
instead
less difference to evbarm

branches: 1.2.164; 1.2.166;
merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.2.164; 1.2.166;
merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

branches: 1.2.4;
Merge newlock2 to head.

branches: 1.1.2;
file rwlock.h was initially added on branch newlock2.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

branches: 1.1.2; 1.1.6;
Rename sljitarch.h to sljit_machdep.h.

Rename sljitarch.h to sljit_machdep.h.

Add sljit support to arm.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

provide __HAVE_COMPAT_NETBSD32 and fix multiple include protection consistently.

branches: 1.9.12; 1.9.30; 1.9.34; 1.9.38;
On ARM-ish ports having PCI support, use new-style <sys/bus.h>. Do not
install <machine/bus.h>. Remove various <machine/bus.h> sources.

Now that __HAVE_TIMECOUNTER and __HAVE_GENERIC_TODR are invariants,
remove the conditionals and the code associated with the undef case.

branches: 1.7.2; 1.7.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.6.6; 1.6.10;
Generic soft interrupts are mandatory.

branches: 1.5.10; 1.5.18;
Enable timecounters for iyonix

Enable __HAVE_GENERIC_TODR. ok gavan@

branches: 1.3.2;
Nothing in the kernel now tests __HAVE_NWSCONS, so stop defining it everywhere.

branches: 1.2.4; 1.2.8;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

- expose vmparams to userland on arm, like other archs do.
- remove unneeded includes

branches: 1.7.4;
ISA exists on more that just shark. Fix a comment about this.

Use default PAGER_MAP_DEFAULT_SIZE for ARM and PowerPC, exception
acorn26. This bumps the KVA reservation from 4MB to 16MB and avoids
long hangs on my Cubietruck under IO. acorn26 is kept as it does have a
ridiculous low 32MB KVA limit.

branches: 1.5.2; 1.5.16;
Expose the contents also for _KMEMUSER, fixes build of usr.sbin/crash.

branches: 1.4.8; 1.4.12;
Remove incomplete, never worked dynamic run-time memory registration
(uvm_page_physload(9)). This functionality will be re-added later.

branches: 1.3.40; 1.3.42;
defparam PAGER_MAP_SIZE.

branches: 1.2.30; 1.2.46; 1.2.48; 1.2.50; 1.2.54;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Garbage-collect the "base_year_is_2000" property and associated
DSRTC_YEAR_START_2K config option (only used by Iyonix GENERIC).
Instead, set the "start-year" property to 2000 as needed (matches
the property name in the Devicetree RTC bindings used for the same
purpose).

Use device_setprop_data() to set the "mac-address" property.

Remove unnecessary <sys/malloc.h>.

set base_year_is_2k on dsrtc so we're compatible with RISC OS

- RISC OS hands us the graphics hardware in BGR mode when running 32bit colour
pass that info on to genfb/gffb so X can show colours correctly
- set genfb properties on gffb as well

branches: 1.15.36; 1.15.38;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.

branches: 1.14.2;
Do not call setroot() from MD code and from MI code, which has
unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.

No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().

Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().

Make cpu_rootconf(9) describe the calling order.

Fix more -fno-common fallout.
Move more variables to common locations.

branches: 1.12.12; 1.12.18;
Unify the name of the device property to hold a MAC address - there was
no clear majority for either "mac-addr" vs. "mac-address", but a quick
gallup poll among developers selected the latter.

On NetBSD/iyonix:

* Disable interrupts in otherwise-configure Nvidia graphics card
* Support genfb console, based on information supplied by the bootloader
* Support kernel args
* Support ways to choose which console to use
* Clarify argument parsing a little.

(from me and abs)

Remove clause 3 and 4 from TNF licenses

branches: 1.9.14; 1.9.16; 1.9.18;
Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.8.2; 1.8.16; 1.8.18; 1.8.20; 1.8.26;
TRUE -> true, FALSE -> false

branches: 1.7.14;
Remove the devprop API and switch everthing over to the new proplib. Add
a new device_properties() accessor for device_t that returns the device's
property dictionary.

branches: 1.6.2; 1.6.4; 1.6.6;
Fix inverted device_is_a() use logic in rev. 1.4.

cfg1, cfg2, and swdpin are not generic properties the same way that
mac-addr is. Prefix them with i82543-

Use device_is_a()

* Read the Machine ID from flash
* Determine the MAC address for the onboard Ethernet from the Machine ID
* Use device properties to pass the MAC address into the wm driver

branches: 1.2.2; 1.2.4; 1.2.6;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Clean up initialization of com_regs structure, in preparation for
some additional changers.

branches: 1.6.52; 1.6.54;
#include <sys/bus.h> instead of <machine/bus.h>.

Remove clause 3 and 4 from TNF licenses

branches: 1.4.2; 1.4.4;
Split device_t and softc for all com(4) devices (well, everything that
uses a com_softc backend). Use proper types and ansify where appropriate.

branches: 1.3.34; 1.3.54; 1.3.58;
Add an option COM_REGMAP to allow com(4) to use an array of register indices.
This allows us to convert aucom to just another com attachment, and cleanup
some code in the com_arbus.c.

Additionally, we use a common com_cleanup routine rather than having a
zillion copies of it in the attachment points.

This has been tested on a number architectures, and it has been shown to get
close to comparable performance when COM_REGMAP is defined, and comparable
when it is not defined.

Approved by core@. Fixes PR port-evbmips/32362.

branches: 1.2.4; 1.2.8; 1.2.16;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Change old-stlye-defintions to C89 prototypes.
Switch to CFATTACH_DECL_NEW/device_t/cfdata_t
Defer attaching interrupt evcnts.

Approved by releng.

branches: 1.5.2; 1.5.6;
#include <sys/bus.h> instead of <machine/bus.h>.

Fix typo

branches: 1.3.4; 1.3.6; 1.3.8; 1.3.12;
Add an offset to the I/O port translations. This allows IQ80321
and others to avoid providing PCI I/O space at address 0.
Iyonix, however, needs to provide PCI I/O space at 0.
The others require I/O space to be offset in part due to a bug
work-around in wm(4) which requires that I/O space access be used
to reset the controllers. If I/O space is mapped at zero, the card
claims, but ignores, the transactions, and the controller doesn't
get reset properly and can't then be used.

merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Fix non-DIAGNOSTIC builds

fix printf format specifier for physmem.

fixes VERBOSE_INIT_ARM enabled build for iyonix.

Provide a shared pmap_devmap implementation and convert all pmap_devmap
arrays to use DEVMAP_ENTRY{,_END}

branches: 1.31.4;
fix the build.

PMAP_DEBUG has been deleted on arm

Trailing whitespace

branches: 1.28.8;
Consistently use vaddr_t as initarm and friends return type.

Makes no difference to binaries except for aarch64 where it's required

KNF

Fix a commit

branches: 1.25.14; 1.25.16;
switch all ports to use uvm_init.c:uvm_md_init()

uvm_setpagesize() is now subsumed within this funciton.

branches: 1.24.2; 1.24.4;
Replace more vm_offset_t, vm_size_t with vaddr_t, vsize_t
Use paddr_t for msgbufphys

Initialize variables used to setup a dummy element.
XXX bogus, needs review

Fix <arm/locore.h> lossage

branches: 1.21.2;
Don't use an asm in pmap_activate to update the TTBR, use cpu_setttb instead
but add a second argument to it to indicate whether the TLB/caches need to be
flushed. Default cortex to pmap_needs_fixup = 1. But check the MMFR3 field
to see if the fixed can be skipped.
Use a cf_flag bit 0 to indicate whether the A9 L2 cache should disable (bit 0 = 1)
or enabeld (bit = 0).

With these changes, the A9 MMU can use traverse caches to do MMU tablewalks
Also, make sure all memory has the shareable bit for the A9.

branches: 1.20.2;
Move the standard definitions of the {UND,IRQ,FIQ,ABT}_STACK_SIZE to
<arm32/machdep.h>
Move the extern for cpu_reset_address to the same file.
Add cpu_reset_address_paddr.
Kill cpu_reset_v4_MMU_disable.
if cpu_reset_address is NULL, then the MMU will be disabled.

Fix more -fno-common fallout.
Move more variables to common locations.

branches: 1.18.2;
#include <sys/bus.h> instead of <machine/bus.h>.

dependant -> dependent

More setttb() -> cpu_setttb() for readability & consistency. Missing instances
pointed out by tsutsui@ & nonaka@, thanks.

- Use uvm_lwp_setuarea() instead of directly setting address to lwp_t::l_addr.
- Replace most remaining uses of l_addr with uvm_lwp_getuarea() or lwp_getpcb().
- Amend assembly in ports where it accesses PCB via struct user.
- Rename L_ADDR to L_PCB in few places. Reduce sys/user.h inclusions.

Kill proc0paddr. Use lwp0.l_addr instead.

Remove all declarations of physmem from sys/arch. Add an include of
<sys/systm.h> to the one file that did not already contain it.
This now means that physmem can be changed by updating systm.h and uvm_page.c
(excluding fixing printfs)

On NetBSD/iyonix:

* Disable interrupts in otherwise-configure Nvidia graphics card
* Support genfb console, based on information supplied by the bootloader
* Support kernel args
* Support ways to choose which console to use
* Clarify argument parsing a little.

(from me and abs)

As discussed on tech-kern: mutex_init is too heavyweight for early bootstrap
phases, so move the initialization of the ksyms mutex back into main via
a function called ksyms_init. Rename the existing (but quite different)
ksyms_init* variations into ksyms_addsyms_elf() and ksyms_addsyms_explicit()
and adapt machdep code accordingly.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

It is not appropriate to call pmf_system_shutdown(9) from
doshutdownhooks(9): shutdown hooks registered by shutdownhook_establish(9)
expect to be called with interrupts disabled, but shutdown hooks
registered with pmf_device_register1(9) expect to be called with
interrupts enabled. So I have made two changes:

1 Do not call pmf_system_shutdown() from doshutdownhooks(). Instead,
change every call to doshutdownhooks() to a call to doshutdownhooks()
followed by a call to pmf_system_shutdown(). No functional change
is intended by this change.

2 Make i386 re-enable interrupts briefly while it calls
pmf_system_shutdown(). I leave it to others either to fix the
other ports, or to factor out some MI shutdown code, as joerg@
suggests, and fix that. Note that a functional change *is* intended
by this change.

I hope that this patch will stop us from flip-flopping between
calling doshutdownhooks() and pmf_system_shutdown() sometimes with
and sometimes without interrupts enabled.

branches: 1.8.6; 1.8.8;
Merge kernel changes in matt-armv6 to HEAD.

branches: 1.7.6; 1.7.8; 1.7.10;
Remove arm support for IPKDB.

It hasn't worked since arm was broken out from arm32 in Jan 2001, and
no-one has noticed or cared to fix it.

branches: 1.6.30; 1.6.34; 1.6.40; 1.6.48;
Fix a build problem ('kernel_l1pt.pv_va may be used uninitialized').

branches: 1.5.2; 1.5.10;
* Read the Machine ID from flash
* Determine the MAC address for the onboard Ethernet from the Machine ID
* Use device properties to pass the MAC address into the wm driver

branches: 1.4.2; 1.4.4; 1.4.6;
Remove leading __ from __(const|inline|signed|volatile) -- it is obsolete.

merge ktrace-lwp.

branches: 1.2.2; 1.2.14;
Fix some comment typos and a spelling error.

Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

get rid of homegrown pci_conf_hook(), use the mechanism from arm32_pci_chipset
instead
less difference to evbarm

Add xname argument to pc_intr_establish implementation

branches: 1.8.28; 1.8.30;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

branches: 1.7.2; 1.7.12; 1.7.16;
#include <sys/bus.h> instead of <machine/bus.h>.

Fix fallout from pci_attach_args constification.

branches: 1.5.42; 1.5.48;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.4.10;
Now that we have extended PCI address space, we no longer have to avoid
configuring the graphics card.

branches: 1.3.20; 1.3.24; 1.3.26; 1.3.32;
PCI_NETBSD_CONFIGURE should allocate (but not map) address space expansion
ROMS by default. Full discussion at
http://mail-index.netbsd.org/tech-kern/2005/12/16/0023.html
Closes PR kern/32467
Reviewed by briggs@

branches: 1.2.2; 1.2.4; 1.2.6;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

* Read the Machine ID from flash
* Determine the MAC address for the onboard Ethernet from the Machine ID
* Use device properties to pass the MAC address into the wm driver

branches: 1.2.2; 1.2.4; 1.2.6;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

* Read the Machine ID from flash
* Determine the MAC address for the onboard Ethernet from the Machine ID
* Use device properties to pass the MAC address into the wm driver

branches: 1.2.2; 1.2.4; 1.2.6;
merge ktrace-lwp.

branches: 1.1.2; 1.1.14;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Merge thorpej-cfargs2.

branches: 1.7.8;
Merge thorpej-cfargs branch:

Simplify and make extensible the config_search() / config_found() /
config_attach() interfaces: rather than having different variants for
which arguments you want pass along, just have a single call that
takes a variadic list of tag-value arguments.

Adjust all call sites:
- Simplify wherever possible; don't pass along arguments that aren't
actually needed.
- Don't be explicit about what interface attribute is attaching if
the device only has one. (More simplification.)
- Add a config_probe() function to be used in indirect configuiration
situations, making is visibly easier to see when indirect config is
in play, and allowing for future change in semantics. (As of now,
this is just a wrapper around config_match(), but that is an
implementation detail.)

Remove unnecessary or redundant interface attributes where they're not
needed.

There are currently 5 "cfargs" defined:
- CFARG_SUBMATCH (submatch function for direct config)
- CFARG_SEARCH (search function for indirect config)
- CFARG_IATTR (interface attribte)
- CFARG_LOCATORS (locators array)
- CFARG_DEVHANDLE (devhandle_t - wraps OFW, ACPI, etc. handles)

...and a sentinel value CFARG_EOL.

Add some extra sanity checking to ensure that interface attributes
aren't ambiguous.

Use CFARG_DEVHANDLE in MI FDT, OFW, and ACPI code, and macppc and shark
ports to associate those device handles with device_t instance. This
will trickle trough to more places over time (need back-end for pre-OFW
Sun OBP; any others?).

branches: 1.6.68;
#include <sys/bus.h> instead of <machine/bus.h>.

Some more device_t, cfdata_t, CFATTACH_DECL_NEW cleanup.

branches: 1.4.100; 1.4.110;
merge ktrace-lwp.

s/locdesc_t/int/g

branches: 1.2.2;
adaptions to config_search() change, and minor autoconf fixes, mostly from Havard Eidnes

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Trailing whitespace

use designated initializer to make adaptability and flexibility for changing struct bus_space.
no functional change.

branches: 1.6.28;
Don't manipulate the pte to get uncached memory, use PMAP_NOCACHE instead.
Convert footbring to kenter_pa/kremove

branches: 1.5.2; 1.5.12; 1.5.16;
#include <sys/bus.h> instead of <machine/bus.h>.

Add a flags argument to pmap_kenter_pa(9).
Patch showed on tech-kern@ http://mail-index.netbsd.org/tech-kern/2009/11/04/msg006434.html
No objections.

branches: 1.3.78;
bus_dmamem_map: honour BUS_DMA_NOWAIT. noted by Manuel Bouyer.
bus_space_map: always do NOWAIT allocation as it used to be before yamt-km.

we have too many copies!

branches: 1.2.2; 1.2.8;
merge yamt-km branch.
- don't use managed mappings/backing objects for wired memory allocations.
save some resources like pv_entry. also fix (most of) PR/27030.
- simplify kernel memory management API.
- simplify pmap bootstrap of some ports.
- some related cleanups.

branches: 1.1.2; 1.1.6; 1.1.8;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

merge ktrace-lwp.

branches: 1.1.2;
Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.