| History log of /src/sys/arch/luna68k/stand/boot/autoconf.c |
| Revision | | Date | Author | Comments |
| 1.11 |
| 30-Jun-2019 |
tsutsui | Pull OpenBSD/luna88k board.h to define SX9100 board device addresses.
Also replace magic addresses with macro where appropriate.
|
| 1.10 |
| 10-Jan-2014 |
tsutsui | branches: 1.10.30;
Reorgenize boot device configuration. The idea is taken from OpenBSD/luna88k.
- remove kernel-like autoconfiguration to probe bootable devices
- initialize SCSI and Ethernet controllers statically instead
- reorganize device softc structures per autoconf removal
- probe and print all SCSI disks (but don't assign unit numbers)
- make sdopen() to recheck the device and allocate softc dynamically
- use controller number and SCSI target ID (ctlr * 10 + id) to specify
the boot disk on the "boot" command arg
- bump version to denote changes
Now bootloader works as the following:
---
>> NetBSD/luna68k boot, Revision 1.8 (Wed Jan 8 22:13:12 JST 2014)
>> (based on Stinger ver 0.0 [Phase-31])
Machine model = LUNA-II
Physical Memory = 0x4000000 (64 MB)
sc0 at 0xe1000000: async, parity, ID 7
ID 3: TEAC FC-1 HGF 10 rev , 512 bytes/sect x 2879 sectors
ID 6: IBM DPES-31080 rev S31Q, 512 bytes/sect x 2118143 sectors
sc1 at 0xe1000040: async, parity, ID 7
ID 6: MELCO DSC-G rev 1.00, 512 bytes/sect x 62533295 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:03:42:77
Press return to boot now, any other key for boot menu
booting sd(16,0)netbsd - starting in 0 seconds.
auto-boot sd(16,0)netbsd
1911696+96040 [280480+159179]=0x255a30
:
|
| 1.9 |
| 03-Jan-2014 |
tsutsui | Misc cleanup from OpenBSD/luna88k.
- remove unused code
- use proper prefix for structure members for readability
|
| 1.8 |
| 03-Jan-2014 |
tsutsui | Remove unused code (from OpenBSD/luna88k). Some KNF.
|
| 1.7 |
| 22-Jan-2013 |
tsutsui | branches: 1.7.2; 1.7.4; 1.7.6;
Whitespace cleanup.
|
| 1.6 |
| 14-Jan-2013 |
tsutsui | Use unsigned for device address.
|
| 1.5 |
| 14-Jan-2013 |
tsutsui | Remove hp300 specific select code and use proper hw address to match device.
|
| 1.4 |
| 14-Jan-2013 |
tsutsui | Remove unused hw_id and hw_id2 members from device info.
They are valid only on hp300.
|
| 1.3 |
| 14-Jan-2013 |
tsutsui | Fix drivers to make secondary SPC SCSI on LUNA-II work properly.
Also bump version.
Now we can load a NetBSD kernel from external SCSI disks on LUNA-II.
(and netboot on LUNA-II also works)
|
| 1.2 |
| 12-Jan-2013 |
tsutsui | Fix warnings on DEBUG build.
|
| 1.1 |
| 05-Jan-2013 |
tsutsui | First cut at NetBSD/luna68k native bootloader.
Based on 4.4BSD-Lite2/luna68k "Stinger" loader revision "Phase-31"
http://svnweb.freebsd.org/csrg/sys/luna68k/stand/
and MI libsa glue stuff are taken from hp300 etc.
Tested on LUNA-I and old DK315C SCSI disk drive.
LUNA's monitor PROM can load only an a.out binary in 4.3BSD FFS partition
(i.e. created by "newfs -O 0") on disks with OMRON's UniOS disklabel,
but now we can load an ELF kernel in root partition via this bootloader.
(See luna68k/disksubr.c for details of UniOS label)
TODO:
- LUNA-II support (check 68040 to adjust cpuspeed for DELAY())
- secondary SCSI support for LUNA-II
- netboot via le(4) (should be trivial)
- support boot options on bootloader prompt
- bootinfo (passing info about booted device and kernel symbols)
- support "press return to boot now, any other key for boot menu" method
like x86 bootloader (needs cnscan() like functions)
- tapeboot (anyone wants it?)
|
| 1.7.6.3 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.7.6.2 |
| 25-Feb-2013 |
tls | resync with head
|
| 1.7.6.1 |
| 22-Jan-2013 |
tls | file autoconf.c was added on branch tls-maxphys on 2013-02-25 00:28:48 +0000
|
| 1.7.4.1 |
| 18-May-2014 |
rmind | sync with head
|
| 1.7.2.3 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.7.2.2 |
| 23-Jan-2013 |
yamt | sync with head
|
| 1.7.2.1 |
| 22-Jan-2013 |
yamt | file autoconf.c was added on branch yamt-pagecache on 2013-01-23 00:05:52 +0000
|
| 1.10.30.1 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
