| History log of /src/sys/arch/luna68k/stand/boot/samachdep.h |
| Revision | | Date | Author | Comments |
| 1.20 |
| 14-Feb-2015 |
tsutsui | Use proper signedness and exact-width interger types.
|
| 1.19 |
| 21-Apr-2014 |
tsutsui | branches: 1.19.4;
Fix stupid botches in previous.
Use a proper device unit number if a unit number or non-default device
is specified on the boot command.
|
| 1.18 |
| 16-Apr-2014 |
tsutsui | Use booted device unit if no unit number is specified on boot command.
Bump version to denote a visible change.
|
| 1.17 |
| 11-Jan-2014 |
tsutsui | branches: 1.17.2;
Remove unused declarations.
|
| 1.16 |
| 11-Jan-2014 |
tsutsui | Add support to pass boothowto and bootdev info from bootloader to kernel.
Bootloader side changes:
- make boot command parse boothowto flags (-ads etc.)
- pass boothowto and bootdev info to the kernel via %d7 and %d6
as the old 4.4BSD/luna68k kernel expected
- remove unused and now unnecessary "howto" (how_to_boot) command
- export and tweak make_device() in devopen.c to prepare bootdev info
- remove unused and commented out get_boot_device()
|
| 1.15 |
| 10-Jan-2014 |
tsutsui | Reorgenize boot device configuration. The idea is taken from OpenBSD/luna88k.
- remove kernel-like autoconfiguration to probe bootable devices
- initialize SCSI and Ethernet controllers statically instead
- reorganize device softc structures per autoconf removal
- probe and print all SCSI disks (but don't assign unit numbers)
- make sdopen() to recheck the device and allocate softc dynamically
- use controller number and SCSI target ID (ctlr * 10 + id) to specify
the boot disk on the "boot" command arg
- bump version to denote changes
Now bootloader works as the following:
---
>> NetBSD/luna68k boot, Revision 1.8 (Wed Jan 8 22:13:12 JST 2014)
>> (based on Stinger ver 0.0 [Phase-31])
Machine model = LUNA-II
Physical Memory = 0x4000000 (64 MB)
sc0 at 0xe1000000: async, parity, ID 7
ID 3: TEAC FC-1 HGF 10 rev , 512 bytes/sect x 2879 sectors
ID 6: IBM DPES-31080 rev S31Q, 512 bytes/sect x 2118143 sectors
sc1 at 0xe1000040: async, parity, ID 7
ID 6: MELCO DSC-G rev 1.00, 512 bytes/sect x 62533295 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:03:42:77
Press return to boot now, any other key for boot menu
booting sd(16,0)netbsd - starting in 0 seconds.
auto-boot sd(16,0)netbsd
1911696+96040 [280480+159179]=0x255a30
:
|
| 1.14 |
| 03-Jan-2014 |
tsutsui | Pull more cleanups from OpenBSD/luna88k:
- remove unused declarations
- rename struct scsi_fmt_cdb to scsi_generic_cdb
|
| 1.13 |
| 03-Jan-2014 |
tsutsui | Pull more fixes from OpenBSD/luna88k:
- Bring getline() - a.k.a libsa gets() with a prompt prefix - in par with libsa
gets(), featurewise; this means support for ^u to clear the input.
- constify
|
| 1.12 |
| 03-Jan-2014 |
tsutsui | Pull more fixes from OpenBSD/luna88k:
- accept empty controller and partition numbers, as well as empty filenames,
and use defaults (0, 0 and "netbsd") instead of complaining the boot path
is invalid
- move a macro where actually necessary
Also bump version to denote the user visible change.
|
| 1.11 |
| 02-Jan-2014 |
tsutsui | Misc cleanup. Mostly from OpenBSD/luna88k.
- fix isprint() macro
- hight -> height
- remove an unused function
- adjust tabs/spaces
- constify the bitmap font
- consistently use #define<space>
- use #if 0/#endif to disable code block
- u_long -> uint32_t, u_short -> uint16_t
- some KNF
|
| 1.10 |
| 05-Mar-2013 |
tsutsui | branches: 1.10.6;
Check netboot and set proper default boot device.
Also bump version.
|
| 1.9 |
| 22-Jan-2013 |
tsutsui | branches: 1.9.2; 1.9.6;
Whitespace cleanup.
|
| 1.8 |
| 21-Jan-2013 |
tsutsui | Add support for "await key" to abort autoboot and get boot menu.
Also add command help. Bump version.
|
| 1.7 |
| 20-Jan-2013 |
tsutsui | Remove unused bmcintr() function.
|
| 1.6 |
| 16-Jan-2013 |
tsutsui | Add UFS2 support. Also bump version.
|
| 1.5 |
| 16-Jan-2013 |
tsutsui | Enable and add ls command for ufs.
|
| 1.4 |
| 14-Jan-2013 |
tsutsui | Fix drivers to make secondary SPC SCSI on LUNA-II work properly.
Also bump version.
Now we can load a NetBSD kernel from external SCSI disks on LUNA-II.
(and netboot on LUNA-II also works)
|
| 1.3 |
| 13-Jan-2013 |
tsutsui | Add netboot support.
Based on ews4800mips, mvme68k, and x68k standalone drivers.
Also bump version.
Tested on LUNA-I.
XXX: We really need proper documents about libsa APIs.
|
| 1.2 |
| 12-Jan-2013 |
tsutsui | Check cputype and set machine type (LUNA-I or LUNA-II).
Tested on only LUNA-I for now.
|
| 1.1 |
| 05-Jan-2013 |
tsutsui | First cut at NetBSD/luna68k native bootloader.
Based on 4.4BSD-Lite2/luna68k "Stinger" loader revision "Phase-31"
http://svnweb.freebsd.org/csrg/sys/luna68k/stand/
and MI libsa glue stuff are taken from hp300 etc.
Tested on LUNA-I and old DK315C SCSI disk drive.
LUNA's monitor PROM can load only an a.out binary in 4.3BSD FFS partition
(i.e. created by "newfs -O 0") on disks with OMRON's UniOS disklabel,
but now we can load an ELF kernel in root partition via this bootloader.
(See luna68k/disksubr.c for details of UniOS label)
TODO:
- LUNA-II support (check 68040 to adjust cpuspeed for DELAY())
- secondary SCSI support for LUNA-II
- netboot via le(4) (should be trivial)
- support boot options on bootloader prompt
- bootinfo (passing info about booted device and kernel symbols)
- support "press return to boot now, any other key for boot menu" method
like x86 bootloader (needs cnscan() like functions)
- tapeboot (anyone wants it?)
|
| 1.9.6.5 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.9.6.4 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.9.6.3 |
| 23-Jun-2013 |
tls | resync from head
|
| 1.9.6.2 |
| 25-Feb-2013 |
tls | resync with head
|
| 1.9.6.1 |
| 22-Jan-2013 |
tls | file samachdep.h was added on branch tls-maxphys on 2013-02-25 00:28:49 +0000
|
| 1.9.2.3 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.9.2.2 |
| 23-Jan-2013 |
yamt | sync with head
|
| 1.9.2.1 |
| 22-Jan-2013 |
yamt | file samachdep.h was added on branch yamt-pagecache on 2013-01-23 00:05:54 +0000
|
| 1.10.6.1 |
| 18-May-2014 |
rmind | sync with head
|
| 1.17.2.1 |
| 10-Aug-2014 |
tls | Rebase.
|
| 1.19.4.1 |
| 06-Apr-2015 |
skrll | Sync with HEAD
|
