|
Revision tags: perseant-exfatfs-base-20250801 netbsd-11-base netbsd-10-1-RELEASE perseant-exfatfs-base-20240630 perseant-exfatfs-base netbsd-10-0-RELEASE netbsd-10-0-RC6 netbsd-10-0-RC5 netbsd-10-0-RC4 netbsd-10-0-RC3 netbsd-10-0-RC2 thorpej-ifq-base thorpej-altq-separation-base netbsd-10-0-RC1 netbsd-10-base bouyer-sunxi-drm-base thorpej-i2c-spi-conf2-base thorpej-futex2-base thorpej-cfargs2-base thorpej-i2c-spi-conf-base
|
|
| #
1.13 |
|
15-Jun-2021 |
tsutsui |
Fix off-by-one of a number of blocks of probed disks.
The SCSI READ_CAPACITY command returns the last logical data block
address, so we have to increment it to get a number of blocks
as src/sys/dev/scsipi/sd.c does.
Bump revision to denote the change.
|
|
Revision tags: netbsd-8-3-RELEASE netbsd-9-4-RELEASE netbsd-9-3-RELEASE cjep_sun2x-base1 cjep_sun2x-base cjep_staticlib_x-base1 netbsd-9-2-RELEASE cjep_staticlib_x-base thorpej-cfargs-base thorpej-futex-base netbsd-9-1-RELEASE bouyer-xenpvh-base2 phil-wifi-20200421 bouyer-xenpvh-base1 phil-wifi-20200411 bouyer-xenpvh-base is-mlppp-base phil-wifi-20200406 netbsd-8-2-RELEASE ad-namecache-base3 netbsd-9-0-RELEASE netbsd-9-0-RC2 ad-namecache-base2 ad-namecache-base1 ad-namecache-base netbsd-9-0-RC1 phil-wifi-20191119 netbsd-9-base phil-wifi-20190609 netbsd-8-1-RELEASE netbsd-8-1-RC1 isaki-audio2-base pgoyette-compat-merge-20190127 pgoyette-compat-20190127 pgoyette-compat-20190118 pgoyette-compat-1226 pgoyette-compat-1126 pgoyette-compat-1020 pgoyette-compat-0930 pgoyette-compat-0906 pgoyette-compat-0728 netbsd-8-0-RELEASE phil-wifi-base pgoyette-compat-0625 netbsd-8-0-RC2 pgoyette-compat-0521 pgoyette-compat-0502 pgoyette-compat-0422 netbsd-8-0-RC1 pgoyette-compat-0415 pgoyette-compat-0407 pgoyette-compat-0330 pgoyette-compat-0322 pgoyette-compat-0315 pgoyette-compat-base tls-maxphys-base-20171202 matt-nb8-mediatek-base nick-nhusb-base-20170825 perseant-stdc-iso10646-base netbsd-8-base prg-localcount2-base3 prg-localcount2-base2 prg-localcount2-base1 prg-localcount2-base pgoyette-localcount-20170426 bouyer-socketcan-base1 jdolecek-ncq-base pgoyette-localcount-20170320 nick-nhusb-base-20170204 bouyer-socketcan-base pgoyette-localcount-20170107 nick-nhusb-base-20161204 pgoyette-localcount-20161104 nick-nhusb-base-20161004 localcount-20160914 pgoyette-localcount-20160806 pgoyette-localcount-20160726 pgoyette-localcount-base nick-nhusb-base-20160907 nick-nhusb-base-20160529 nick-nhusb-base-20160422 nick-nhusb-base-20160319
|
|
| #
1.12 |
|
17-Jan-2016 |
tsutsui |
branches: 1.12.34;
Enable LIBSA_CREAD_NOCRC. PR/50638
Also bump version to denote user visible change.
Tested on LUNA-II.
|
|
Revision tags: netbsd-7-2-RELEASE netbsd-7-1-2-RELEASE netbsd-7-1-1-RELEASE netbsd-7-1-RELEASE netbsd-7-1-RC2 netbsd-7-nhusb-base-20170116 netbsd-7-1-RC1 netbsd-7-0-2-RELEASE netbsd-7-nhusb-base netbsd-7-0-1-RELEASE nick-nhusb-base-20151226 netbsd-7-0-RELEASE nick-nhusb-base-20150921 netbsd-7-0-RC3 netbsd-7-0-RC2 netbsd-7-0-RC1 nick-nhusb-base-20150606 nick-nhusb-base-20150406 nick-nhusb-base netbsd-7-base yamt-pagecache-base9 tls-earlyentropy-base rmind-smpnet-nbase rmind-smpnet-base tls-maxphys-base
|
|
| #
1.11 |
|
16-Apr-2014 |
tsutsui |
branches: 1.11.4;
Use booted device unit if no unit number is specified on boot command.
Bump version to denote a visible change.
|
|
Revision tags: riastradh-xf86-video-intel-2-7-1-pre-2-21-15 riastradh-drm2-base3
|
|
| #
1.10 |
|
11-Jan-2014 |
tsutsui |
branches: 1.10.2;
Bump version to denote support to pass boothowto and bootdev to kernel.
|
| #
1.9 |
|
10-Jan-2014 |
tsutsui |
Reorgenize boot device configuration. The idea is taken from OpenBSD/luna88k.
- remove kernel-like autoconfiguration to probe bootable devices
- initialize SCSI and Ethernet controllers statically instead
- reorganize device softc structures per autoconf removal
- probe and print all SCSI disks (but don't assign unit numbers)
- make sdopen() to recheck the device and allocate softc dynamically
- use controller number and SCSI target ID (ctlr * 10 + id) to specify
the boot disk on the "boot" command arg
- bump version to denote changes
Now bootloader works as the following:
---
>> NetBSD/luna68k boot, Revision 1.8 (Wed Jan 8 22:13:12 JST 2014)
>> (based on Stinger ver 0.0 [Phase-31])
Machine model = LUNA-II
Physical Memory = 0x4000000 (64 MB)
sc0 at 0xe1000000: async, parity, ID 7
ID 3: TEAC FC-1 HGF 10 rev , 512 bytes/sect x 2879 sectors
ID 6: IBM DPES-31080 rev S31Q, 512 bytes/sect x 2118143 sectors
sc1 at 0xe1000040: async, parity, ID 7
ID 6: MELCO DSC-G rev 1.00, 512 bytes/sect x 62533295 sectors
le0: Am7990 LANCE Ethernet, mem at 0x71010000
le0: Ethernet address = 00:00:0a:03:42:77
Press return to boot now, any other key for boot menu
booting sd(16,0)netbsd - starting in 0 seconds.
auto-boot sd(16,0)netbsd
1911696+96040 [280480+159179]=0x255a30
:
|
| #
1.8 |
|
05-Jan-2014 |
tsutsui |
Detect boot device on PROM load command and set proper default boot device.
Also remove now unnecessary the old netboot check.
Note all addresses of boot device info set by monitor are checked by
memory dump on several LUNA ROM versions, and these addres might be
different on earlier monitor ROM versions.
Bump version to denote the visible change.
|
| #
1.7 |
|
03-Jan-2014 |
tsutsui |
Pull more fixes from OpenBSD/luna88k:
- accept empty controller and partition numbers, as well as empty filenames,
and use defaults (0, 0 and "netbsd") instead of complaining the boot path
is invalid
- move a macro where actually necessary
Also bump version to denote the user visible change.
|
|
Revision tags: riastradh-drm2-base2 riastradh-drm2-base1 riastradh-drm2-base agc-symver-base
|
|
| #
1.6 |
|
05-Mar-2013 |
tsutsui |
branches: 1.6.6;
Check netboot and set proper default boot device.
Also bump version.
|
|
Revision tags: yamt-pagecache-base8
|
|
| #
1.5 |
|
21-Jan-2013 |
tsutsui |
branches: 1.5.2; 1.5.6;
Add support for "await key" to abort autoboot and get boot menu.
Also add command help. Bump version.
|
| #
1.4 |
|
16-Jan-2013 |
tsutsui |
Add UFS2 support. Also bump version.
|
| #
1.3 |
|
14-Jan-2013 |
tsutsui |
Fix drivers to make secondary SPC SCSI on LUNA-II work properly.
Also bump version.
Now we can load a NetBSD kernel from external SCSI disks on LUNA-II.
(and netboot on LUNA-II also works)
|
| #
1.2 |
|
13-Jan-2013 |
tsutsui |
Add netboot support.
Based on ews4800mips, mvme68k, and x68k standalone drivers.
Also bump version.
Tested on LUNA-I.
XXX: We really need proper documents about libsa APIs.
|
| #
1.1 |
|
05-Jan-2013 |
tsutsui |
First cut at NetBSD/luna68k native bootloader.
Based on 4.4BSD-Lite2/luna68k "Stinger" loader revision "Phase-31"
http://svnweb.freebsd.org/csrg/sys/luna68k/stand/
and MI libsa glue stuff are taken from hp300 etc.
Tested on LUNA-I and old DK315C SCSI disk drive.
LUNA's monitor PROM can load only an a.out binary in 4.3BSD FFS partition
(i.e. created by "newfs -O 0") on disks with OMRON's UniOS disklabel,
but now we can load an ELF kernel in root partition via this bootloader.
(See luna68k/disksubr.c for details of UniOS label)
TODO:
- LUNA-II support (check 68040 to adjust cpuspeed for DELAY())
- secondary SCSI support for LUNA-II
- netboot via le(4) (should be trivial)
- support boot options on bootloader prompt
- bootinfo (passing info about booted device and kernel symbols)
- support "press return to boot now, any other key for boot menu" method
like x86 bootloader (needs cnscan() like functions)
- tapeboot (anyone wants it?)
|