Add pbbat(4)

Now it is possible to monitor the PowerBook 1xx AC adaptors and battery via
envsys(4).

branches: 1.238.2;
PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

Driver for DaynaPORT SCSI/Link (dse.4).

Written by Hiroshi Noguchi, of which an updated version was posted to
port-mac68k in 2001.

Attachments were added to kernel configs for platforms that already had
the Cabletron (se.4) driver added, although other platorms may benefit.

Reviewed on tech-net by Izumi Tsutsui.

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Add MAC68K_MEMSIZE option to hard-code memory size in MB, instead of
that given by Booter. Work around Booter bug by which max memory is
restricted to 255MB.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.232.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.228.2; 1.228.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.225.2; 1.225.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.221.10;
Remove KMEMSTATS.

branches: 1.220.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.216.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.215.4;
Added DJMEMCMAX option for recognizing 128 meg SIMMs in Centris and Quadra
610, 650 and 800 systems. From Rob Braun,
http://synack.net/~bbraun/netbsdmac2.html

G/C PFIL_HOOKS from the kernel configs.

branches: 1.213.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.207.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

Employ the two free 16 bit timers of the Hurdler Centronics Parallel
Interface card's Z8536 CIO for Timecounter support.

Builds, should work, but not testable yet because of pmap breakage.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.203.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.202.2;
Add the MI software watchdog to GENERIC (not to SMALLRAM, as usual).

dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.199.2; 1.199.4;
Consistency in commenting COMPAT_nn options.

Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.195.2; 1.195.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.191.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.189.4;
Add options COMPAT_40 to files which have options COMPAT_30.

Add LOCKDEBUG option, commented out, so that people know it's there.

Added driver for the Creative Systems Inc. Hurdler CPI parallel printer card.
Timecounter support for the Z8536 counters A + B is not complete, yet.

Reviewed by Martin Husemann.

branches: 1.186.6; 1.186.8; 1.186.10; 1.186.12;
Remove systrace. Ok core@.

branches: 1.185.2; 1.185.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.183.2; 1.183.6;
Enable tmpfs.

Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.181.2; 1.181.4; 1.181.8;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

Rather than attaching fpu as a usual device during cpu_configure(9),
initialize it explicitly in identifycpu() (before cpu_configure(9))
because after yamt-idlelwp merge savectx() is called before
cpu_configure(9) and it requires fputype initialized properly,
otherwise a kernel fails in savectx() if a machine doesn't have an FPU.

branches: 1.179.2; 1.179.4; 1.179.10;
Complete rename of hfsp to hfs, requested by thorpej.

Add file-system HFSP (commented out) to GENERIC kernels of ports
on which Mac OS runs.

branches: 1.177.2; 1.177.4; 1.177.8;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.176.2; 1.176.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.173.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.172.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.171.2; 1.171.4; 1.171.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.169.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.168.2; 1.168.4;
Remove the tablet line discipline.

Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.158.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.156.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.151.2;
only one of the obio locators was actually used, so get rid of the others
and collapse the two variations of obio into one. use the remaining locator
("addr") to differentiate the two possible esp and sbc devices (instead of
using the unit number).

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.149.4;
Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.141.2;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

add COMPAT_15/COMPAT_16

branches: 1.138.2;
Add pseudo-device ksyms.

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF by default; it's small and extremely useful to have available.

netdock* - ethernet driver for Asante NetDock/Newer Ether MicroDock.
by Daishi Kato <daishi@axlight.com>
test/stabilization by Takeo Kuwata <tkuwata@virus.kyoto-u.ac.jp>

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.126.2; 1.126.4;
Add IDE drive support.

Note:
(1) Character device major number chages to 49 from 48(in my original
code). So it is necessary to rebuild device files.
(2) Must use Booter 2.0.0a10 or later.
(3) Default mode is cpu busy wait. It is defined by flags 0x1000.
It will be more slow than before.
No flags means hardware interrupt mode. But it might be able to
get no interrupts.

Support machines:
(1) Quadra 630 series
(2) PowerBook 150

Non tested machine:
(1) PowerBook 190 series

Approved by: briggs

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Switch mac68k to ELF. Now the default executable binaries are ELF.

Approved by Scott,briggs,fredb,wormey

Forgot one -- `options COMPAT_15'.

Update the GENERIC and GENERICSBC kernels to conform to current fashion:

- - Disable `options DIAGNOSTIC' by default, as the checks are reported to
be not really cheap.
- - Add `options COMPAT_AOUT_M68K', commented out, in preparation for ELF.
- - Remove `options EXEC_ELF32' from the kernel config. You can't just
build an ELF kernel -- you need to update your toolchain, and then,
once you go ELF, it's not an option, so it needs to go in std.mac68k,
as on the other m68k ports.
- - Comment out `options COMPAT_SUNOS'. This hasn't been reported to work
for a long time, so it's not very useful in GENERIC.
- - Enable `options IPFILTER_LOG', to go along with the `options GATEWAY'
and `pseudo-device ipfilter' motif.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.113.6;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.111.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Add pseudo-device vlan

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Add SMC-based ethernet and nsphy (AsanteFAST) and ukphy (just in case).

Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.102.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

Enable "rnd" pseudo-device. It's no longer experimental, and works just
fine on mac68k.

branches: 1.100.2;
add stf pseudo interface (commented out due to possible security risks)

Attach all displays, keyboards, and mice, not just the first
ones found.

Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.

Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.

Merge wscons work onto the main development branch.

Add commented out "ident"-command

Add overlay to kernel configs.

Take a cue from the i386 port: Enable DHCP by default, rather than
BOOTP.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

Add and enable Coda file system and pseudo-device vcoda. Closes PR 8625.

branches: 1.89.2; 1.89.4; 1.89.8;
It's time to be COMPAT_14.

enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!

Comment out DISABLE_EXT_CACHE as it unnecessarily slows down the IIci
w/ external cache. Leave it around so the paranoid can still use it.

Add COMPAT_SVR4 for m68k.

branches: 1.85.2; 1.85.4; 1.85.6; 1.85.8;
Remove ADB_DEBUG; it's not fatal, but it adds a bunch of code that's
disabled by default.

Add the IWM driver.

Added options COMPAT_LINUX and EXEC_ELF32 as comments
to GENERIC configuration files.

Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Added a (commented out) configuration line for the RAIDframe device driver.

New ADB "bus" interface:
o Separate ms and kbd drivers
o aed device for compatibility
o debug message cleanup in hardware direct support (from scottr)

Add a GRF_COMPAT option so that old-style grf ioctl() code can be
removed from the kernel.

remove options FIFO; it's now the default

Make the direct ADB driver default.

Add (commented out) ALTXBUTTONS option.

Add commented out "options FFS_EI"

Bump down maxusers to a reasonable value on a machine with 8MB.

Compile in BOOTP support for diskless boot.

Add COMPAT_13.

Major reorganization, based largely on the i386 GENERIC. This moves all
bus and device configuration out of std.mac68k, as well.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

Add in the if_mc ethernet driver for the AMD "MACE" part. This is the
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.

branches: 1.68.2;
Enable ipfilter, and add a commented-out rnd pseudo-device line.

add a before tab to SCSIVERBOSE

add commented out reference SCSIVERBOSE option

branches: 1.65.2;
Add NETATALK, and be pedantic with a few comments.

minor whitespaco fixes

be consistent with use of spaces and tabs.

Add MRG_ADB option.

Add se driver

Add SONIC driver. Works on my Q700. Untested elsewhere.

Remove obsolete MAC68K_BROKEN_VIDEO option.

Add the MAC68K_BROKEN_VIDEO option, which is a hack that delays enabling
NuBus interrupts until an Ethernet card is attached.
XXX This should go away at some point, obviously.

Add memory disk pseudo-device

Move asc0 here from std.mac68k, and enable PFIL_HOOKS option so that
the if_ipl LKM can be loaded. Add some minimal driver descriptions.

branches: 1.55.2;
Adopt for new file system and root spec grammar.

Forgot PFIL_HOOKS; correct this. Also, organize options less insanely.

Add `options LKM'

Add ipfilter (pseudo-) device.

branches: 1.51.2;
add 'pseudo-device ccd' where necessary; PR kern/1830.

Add sample sbc config line; format 'options' lines for consistency.

- Move non-optional options SWAPPAGER, VNODEPAGER, and DEVPAGER to std.mac68k
- Catch up with vm/vmparam.h (remove MACHINE_NONCONTIG)
- Fix space/tab niggles in SPOT config
- MYSTERY now includes the esp driver

Remove unused MAXFDESCS option. Closes PR 2927, noticed by Erik
Bertelsen <erik@aarhus1.uni-c.dk>.

Add esp1 at obio?

ncr96scsi -> esp for consistency with sparc and alpha.

We're paranoid; disable the IIci's cache card.

We no longer need 'options GENERIC'

Update for recent config(8) changes.

Add ZS_CONSOLE_ABORT

Add ss, uk SCSI devices

Document COMPAT_M68K4K, but leave it disabled by default.

add COMPAT_12.

Attach ite semantics to the appropriate grf device.

Update for new grf attachment code.

Move grf0 at obio? from std.mac68k to the config files. Not all machine
have internal video.

Prototype for -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-uninitialized
Also change the device probing scheme to use something a bit more rational.
A current side-effect is that nubus cards are double-mapped. I expect
to fix that shortly.
Also change splclock() to block everything but serial hardware interrupts.

Add PPP_BSDCOMP and PPP_DEFLATE options.

Add "options M68020" so that 68851-specific code is only compiled when
we want it (we don't support the 020 without an 851 anyway). Note that
M68030 no longer implies support for 020+851.

This also allows us to compile with -m68030 iff M68020 isn't specified
in the config file.

Get rid of obsolete time specs.

Add a second ppp. It makes the kernel a whole 8 bytes larger on disk.

ae0 -> ae* and add a couple of vnd devices.

Raise number of bpfs to 12 since CAP needs a minimum of 8.

Set timezone to 0. The booter's GMT bias should be used, instead.

GENERIC should have options GENERIC. Duh.

Add FPSP back.

Nuke FPCOPROC and add FPU_EMULATE to GENERIC.
Support the above with gwr's sun3 stuff.

Nuke NEWCONFIG. It's not used anymore at all.

Use M68030 and M68040 instead of MC... Thanks to Luke Mewburn for
pointing out this inconsistency.

Re-enable NFSCLIENT

new RCS ID format.

Before I forget...

Make GENERIC be MACHINE_NONCONTIG.

Make ALLEN a copy of GENERIC. Disable FPSP in GENERIC.

Enable DDB, CD9660, NULLFS. Add bpfilter. Slight cleanup.

Nuke pseudo-device con.

branches: 1.15.2;
Add mac68k_init.c and scsi96.c for 68040 macs and configure them. Not
much uses them, yet, but also added the MC68030 and MC68040 options.

Checkpoint. GENERIC has some things disabled. Makefile updated for
vnode_if and some cleanup. copy.s added to files.

Add fpsp option.

Add COMPAT_09

Add COMPAT_SUNOS--it seems to work.

Disable SCSIDEBUG and make COMPAT_NOMID an option (defined).

Make FPCOPROC an options option and remove it from the Makefile defines.
Also add a configuration that doesn't have it.

Add Id string and disable NFSSERVER and NFSCLIENT until I can get to
the bottom of some panics I've seen.

Enable several more options.

Fixup scsi references and add ISOFS and PROCFS options. Clean up swap/root
definitions, too.

Add Apple Ethernet to GENERIC and files. Also add asc.c to files
for sound support.

Let's try DDB...

Migrate to new MACHINE definition (mac -> mac68k).

Update to current work in progress. This includes an update to
use config.new.

branches: 1.1.1;
Initial revision