Enable PaX mprotect and ASLR here too (just like in GENERIC)

Add and enable WSDISPLAY_SCROLLSUPPORT in non-INSTALLish macppc kernels

Also, fix the whitespace of this line in the GENERIC_601 kernel where it
was already enabled.

Add and enable WSDISPLAY_CUSTOM_OUTPUT in macppc non-INSTALL kernels.

Indirectly addresses PR 59079 by allowing userland control of default
colors of wsemul wsdisplays.

branches: 1.58.2;
Mention DKWEDGE_METHOD_TOS in several kernel config files

PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Adjust _all_ cinclude of *.local files

- Ensure always at end
- Use tab rather than spaces
- Add consistent comment
"Pull in optional local configuration - always at end"

The only functional change is that a local file which tried to
override an existing setting (eg with "no foo") would have failed
in some cases before, but now will work

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

we also need WSDISPLAY_COMPAT_PCVT and _SYSCONS

uncomment WSDISPLAY_COMPAT_USL
while there, add obiofan

Sync pseudo devs crypto and swcrypto with GENERIC

Incllude POWERMAC_G5.local if it exists

fix various typos, mainly in comments.

branches: 1.49.2; 1.49.12;
Add gpt wedge support

Add bpf

Enable a few more filesystems

Remove makeoptions DEBUG="-g" - we have better ways to achieve the same
(build.sh kernel.gdb= or MKKDEBUG=yes)

Add siisata

branches: 1.44.2;
add gffb
tested on 20" 1.8GHz iMac G5

branches: 1.43.4;
remove some leftover nsmb(4) references from kernel configs

remove OFWOEA_WSCONS_NO_ROM_FONT

Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.39.2;
add config for SMP G5 kernels

smusat attaches to iic now

audio works now, so enable it

add adadc driver

add fcu at iic

branches: 1.34.2;
no more need to hardwire the boot device

Return recent changes to configuration file.
Remove legacy options previously removed e.g MACHO & softdep support
Remove bogus numbers
Add or update descriptions
Keep items removed in previous commit commented out

add everything currently known to work

Enable BUFQ_PRIOCSCAN by default for NetBSD/macppc.
Drop references to NEW_BUFQ_STRATEGY and replace with currently available
options BUFQ_READPRIO and BUFQ_PRIOCSCAN.

ok <macallan>

Remove OFB_ENABLE_CACHE
from <macallan>
"it is outdated, genfb and friends don't need or use it, and it makes no sense
on accelerated drivers either. It tries to BAT-map the framebuffer cacheable,
which works on most macs but makes a few models lock up. Genfb doesn't have that
problem and is faster too."

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.26.8;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.25.2; 1.25.4;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

branches: 1.22.2;
Make all ramdisk root sizes equal again

Bump all image sizes slightly again

Update all ramdisk sizes

branches: 1.19.8;
the bogus number police

branches: 1.18.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.16.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.15.2;
dependant -> dependent

Remove Darwin, MACH and Mach-O support.

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.12.2; 1.12.4;
Bump ramdisk size by 64K. This allows release builds to finish on macppc.

Remove unused count from pseudo-device md.

branches: 1.10.4;
Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.9.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.6.4; 1.6.6;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.5.6; 1.5.8; 1.5.10; 1.5.12;
Remove systrace. Ok core@.

branches: 1.4.16; 1.4.22; 1.4.28;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.3.2; 1.3.6; 1.3.8;
options<space><tab> police

branches: 1.2.2; 1.2.4; 1.2.10;
Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.1.2; 1.1.4;
1st cut of Powermac G5 support (uses bridge mode).