Create a new header lwp_private.h to contain _lwp_getprivate_fast,
_lwp_gettcb_fast, _lwp_settcb and remove them from mcontext.h, so that:
1. we don't need special hacks to hide them
2. we can include <lwp.h> where needed to get the necessary prototypes
without redefining them locally.

branches: 1.27.36;
Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.26.14; 1.26.16;
fenv.h for sh

branches: 1.25.12; 1.25.30;
Change <machine/bus.h> to <sys/bus.h> throughout.

Split bus.h -> bus_{defs,funcs}.h.

Mark mmeye/bus.h obsolete.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

Merge newlock2 to head.

branches: 1.22.4;
don't install <machine/db_machdep.h>, this is kernel only

branches: 1.21.4; 1.21.8;
merge ktrace-lwp.

branches: 1.20.12;
Factor out W{CHAR,INT}_{MAX,MIN} into their own header file.

Sync up w. other sh3 ports and don't install trap.h

branches: 1.18.2;
Merge the nathanw_sa branch.

Remove KDIR=, since SYS_INCLUDE=symlinks and KDIR are not supported any more.

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

Implement pmc(9) -- An interface to hardware performance monitoring
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.

pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.

branches: 1.14.2; 1.14.6;
remove obsolete header file (shbvar.h)

remove unneeded code and files.

don't install loadfile_machdep.h. standalone programs should
include it directly from the kernel source tree.

branches: 1.11.2; 1.11.4;
Add definitions of C99 integer format conversion macros.
XXX Fastest minimum-width integer types haven't been decided upon yet.

Add definitions of C99 specified-width integer type limits.
XXX Fastest minimum-width integer types haven't been decided upon yet.

Add definitions of C99 integer constant macros.
Tidy Makefiles up a little.

Add definitions of C99 minimum-width and greatest-width integer types.
XXX Fastest minimum-width integer types haven't been decided upon yet.

branches: 1.7.2;
Add <machine/int_types.h>, which provides namespace-pure definitions
of exact-width integer types.

Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.

These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.

Install "machineendian_machdep.h".

variable start address of the main memory (now we can use
the area 2 as main memory with "options IOM_RAM_BEGIN=0x88000000")

Add NAN constant glue for sh3.

machine/exec_coff.h -> sys/exec_coff.h

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Change <machine/bus.h> to <sys/bus.h> throughout.

Split bus.h -> bus_{defs,funcs}.h.

Mark mmeye/bus.h obsolete.

Remove clause 3 and 4 from TNF licenses

branches: 1.3.74; 1.3.76; 1.3.78;
merge ktrace-lwp.

Adapt to building with -Wcast-qual. Regrettably we have to use
__UNCONST() in one sysctl_lookup() invocation (for now).

branches: 1.1.6; 1.1.8; 1.1.14;
add autoconf.h for new mainbus driver.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.2.8; 1.2.90; 1.2.96; 1.2.98;
remove unneeded code and files.

branches: 1.1.16;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Change <machine/bus.h> to <sys/bus.h> throughout.

Split bus.h -> bus_{defs,funcs}.h.

Mark mmeye/bus.h obsolete.

bus_dma_segment_t should be a structure, not a pointer.

Add dummy bus_dma(9) stuff.

branches: 1.1.164; 1.1.170;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Change <machine/bus.h> to <sys/bus.h> throughout.

Split bus.h -> bus_{defs,funcs}.h.

Mark mmeye/bus.h obsolete.

Change <machine/bus.h> to <sys/bus.h> throughout.

Split bus.h -> bus_{defs,funcs}.h.

Mark mmeye/bus.h obsolete.

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.4.8; 1.4.12;
- define other DEV_ constants that the local port uses.
- delete cdev_decl(mm) since <sys/conf.h> does it.

branches: 1.3.2;
- add dev_noimpl(xxx,yyy) macro to replace "(dev_type_xxx((*))) yyy",
and use appropriately

- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well

- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)

- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev

- ensure that the comments are accurate WRT the behaviour of a given entry

branches: 1.2.6;
watchdog timer

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.5.10;
CTL_MACHDEP definitions are integrated into sh3/include/cpu.h again.

machine dependent sysctl are moved to machine/cpu.h
dreamcast, hpcsh ... CPU_CONSDEV
mmeye, evbsh3 ... CPU_CONSDEV, CPU_LOADANDRESET

branches: 1.3.8;
back to previous one (suggested by cgd)

move sysctl definitions into ${MACHINE}/include/cpu.h

branches: 1.1.2; 1.1.8;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.2.8;
SR related parts moved to psl.h. cpufunc.h segments.h are removed.
kernel mode checking is only SR.MD. no check stack pointer.

branches: 1.1.16;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Add getlabelusesmbr(), as proposed in
http://mail-index.netbsd.org/tech-userlevel/2011/08/25/msg005404.html
This is used by disk tools such as disklabel(8) to dynamically decide is
the undelyling platform uses a disklabel-in-mbr-partition or not
(instead of using a compile-time list of ports).
getlabelusesmbr() reads the sysctl kern.labelusesmbr, takes its value from the
machdep #define LABELUSESMBR.
For evbmips, make LABELUSESMBR 1 if the platform uses pmon
as bootloader, and 0 (the previous value) otherwise.

merge ktrace-lwp.

Make disklabel(8) and fdisk(8) into "host tools " last step: build
and install ${TOOLDIR}/bin/${MACHINE_GNU_PLATFORM}-disklabel,
${TOOLDIR}/bin/${MACHINE_GNU_PLATFORM}-fdisk by "reaching over" to
the sources in ${NETBSDSRCDIR}/sbin/{disklabel fdisk}/.

To avoid clashes with a build-host's header files, especially on
*BSD, the host-tools versions of fdisk and disklabel search for
#includes such as disklabel.h, disklabel_acorn.h, disklabel_gpt.h,
and bootinfo.h in a new #includes namespace, nbinclude/. That is,
they #include <nbinclude/sys/disklabel.h>, <nbinclude/machine/disklabel.h>,
<nbinclude/sparc64/disklabel.h>, instead of <sys/disklabel.h> and
such. I have also updated the system headers to #include from
nbinclude/-space when HAVE_NBTOOL_CONFIG_H is #defined.

branches: 1.1.36;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

In the `MY THAT'S GROSS' department...
Eliminate the recursive include of machine/endian.h from sys/endian.h.

Foolish consistency. Mainly, always use underscores and sys/endian.h.

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.1.6;
In the `MY THAT'S GROSS' department...
Eliminate the recursive include of machine/endian.h from sys/endian.h.

machine/exec_coff.h -> sys/exec_coff.h

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.1.2; 1.1.4; 1.1.18;
fenv.h for sh

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.1.2; 1.1.4; 1.1.22;
Add definitions of C99 integer constant macros.

branches: 1.1.2; 1.1.4; 1.1.22;
Add definitions of C99 integer format conversion macros.
XXX Fastest minimum-width integer types haven't been decided upon yet.

branches: 1.1.2; 1.1.4; 1.1.22;
Add definitions of C99 specified-width integer type limits.
XXX Fastest minimum-width integer types haven't been decided upon yet.

branches: 1.1.2; 1.1.4; 1.1.22;
Add definitions of C99 minimum-width and greatest-width integer types.
XXX Fastest minimum-width integer types haven't been decided upon yet.

branches: 1.1.2;
Add <machine/int_types.h>, which provides namespace-pure definitions
of exact-width integer types.

In order to prevent _mcount() from being recursively called when built with COPTS=-O0,
sprinkle `__always_inline' to make _mcount() be generated as a single function.

s/static inline/static __inline/g for consistency.

branches: 1.11.54;
Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.10.22; 1.10.28; 1.10.30;
Remove clause 3 and 4 from TNF licenses

branches: 1.9.14; 1.9.16; 1.9.18;
Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.8.6; 1.8.22; 1.8.24; 1.8.30;
Remove spllowersoftclock() and CLKF_BASEPRI(), and always dispatch callouts
via a soft interrupt. In the near future, softclock will be run from process
context.

Merge newlock2 to head.

merge yamt-splraiseipl branch.

- finish implementing splraiseipl (and makeiplcookie).
http://mail-index.NetBSD.org/tech-kern/2006/07/01/0000.html
- complete workqueue(9) and fix its ipl problem, which is reported
to cause audio skipping.
- fix netbt (at least compilation problems) for some ports.
- fix PR/33218.

branches: 1.5.6; 1.5.28; 1.5.58; 1.5.60;
adapted to new interrupt code and shb changes.

branches: 1.4.4;
New NetBSD/sh3 clock framework.
+ hardclock source is moved from TMU1 to TMU0.
+ SH3/SH4 common kernel support.
+ PCLOCK estimation.
+ remove duplicated code.

branches: 1.3.8;
move the Interrput Priority Level (IPL_*) definitions into MD part.

multiple interrputs!!!

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Consistently define WARN in a way that passes format string checks, i.e.
always uses the same number of arguments as given in the format string.

branches: 1.6.14; 1.6.28;
Since this port doesn't build its "stand" binaries with _STANDALONE
defined, put in declarations of alloc() and dealloc() which are now
used instead of malloc() / free(), so that the stand/ binaries build again.

Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.4.22; 1.4.28; 1.4.30;
Remove clause 3 and 4 from TNF licenses

branches: 1.3.72; 1.3.74; 1.3.76;
free -> dealloc
unsigned -> size_t for alloc/dealloc

branches: 1.2.12; 1.2.34; 1.2.46;
Split elf32 vs. elf64 handling in loadfile(), including support for
each separately and explicitly. BOOT_ELF is now BOOT_ELF32 and
BOOT_ELF64, and ELFSIZE should no longer be defined in loadfile_machdep.h.

branches: 1.1.16; 1.1.18;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.1.6;
Require that each each MACHINE/MACHINE_ARCH supply a lock.h. This file
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.

These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.

branches: 1.1.4;
Create a new header lwp_private.h to contain _lwp_getprivate_fast,
_lwp_gettcb_fast, _lwp_settcb and remove them from mcontext.h, so that:
1. we don't need special hacks to hide them
2. we can include <lwp.h> where needed to get the necessary prototypes
without redefining them locally.

branches: 1.1.6;
Add NAN constant glue for sh3.

Merge the nathanw_sa branch.

branches: 1.1.2;
file mcontext.h was initially added on branch nathanw_sa.

Add extern.

branches: 1.5.4; 1.5.14;
Support mmEye-WLF.
Also maybe support mmEye-WL, mmEye2, mmEye2-HS.

branches: 1.4.6; 1.4.140; 1.4.146; 1.4.148;
adapted to new interrupt code and shb changes.

branches: 1.3.16;
s/ _MMEYE_H_/ _MMEYE_MMEYE_H_/

remove sh3/include/mmeye.h

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.2.4;
Merge newlock2 to head.

branches: 1.1.2;
file mutex.h was initially added on branch newlock2.

merge ktrace-lwp.

Move UCB-licensed code from 4-clause to 3-clause licence.

Patches provided by Joel Baker in PR 22364, verified by myself.

branches: 1.9.8; 1.9.14;
common part are moved to sh3/include/param.h

Purge CLSIZE, CLSIZELOG2 and MCLOFSET.
Be consistant in the way that MSIZE, MCLSHIFT, MCLBYTES and NMBCLUSTERS
are defined.
Remove old VM constants from cesfic port.
Bump MSIZE to 256 on mipsco (the only one that wasn't already 256).

branches: 1.7.4;
split MACHINE_ARCH sh3e[lb]. userland build still needs checking.

share sys/arch/sh3/conf/Makefile.sh3 across sh3-based architectures.
cleanup param.h a bit.

raise MSIZE from 128 to 256.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)

portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.

branches: 1.4.4;
variable start address of the main memory (now we can use
the area 2 as main memory with "options IOM_RAM_BEGIN=0x88000000")

Update for the NKMEMPAGES changes.

CL* discarding.

branches: 1.1.2; 1.1.8;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.2.10;
Remove unneeded header.

branches: 1.1.16;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.202; 1.1.204;
Implement pmc(9) -- An interface to hardware performance monitoring
counters. These counters do not exist on all CPUs, but where they
do exist, can be used for counting events such as dcache misses that
would otherwise be difficult or impossible to instrument by code
inspection or hardware simulation.

pmc(9) is meant to be a general interface. Initially, the Intel XScale
counters are the only ones supported.

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.2.4;
Merge newlock2 to head.

branches: 1.1.2;
file rwlock.h was initially added on branch newlock2.

branches: 1.2.8;
SR related parts moved to psl.h. cpufunc.h segments.h are removed.
kernel mode checking is only SR.MD. no check stack pointer.

branches: 1.1.16;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

variable start address of the main memory (now we can use
the area 2 as main memory with "options IOM_RAM_BEGIN=0x88000000")

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

branches: 1.2.4;
adapted to new interrupt code and shb changes.

branches: 1.1.16;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

move VM_PHYSSEG_MAX, VM_NFREELIST, VM_FREELIST_DEFAULT defines to
machine/vmparam.h

branches: 1.1.2;
Merge in NetBSD/sh3 from cvs.kame.net repository.

Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)

Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).

merge ktrace-lwp.

branches: 1.1.2;
Factor out W{CHAR,INT}_{MAX,MIN} into their own header file.