PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

branches: 1.32.4;
swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.28.4; 1.28.6;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.27.6; 1.27.10; 1.27.12;
PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.26.2; 1.26.4;
Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove KMEMSTATS.

branches: 1.24.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

branches: 1.22.6;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.21.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

branches: 1.16.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

branches: 1.15.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.14.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.13.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

Fix ident.

branches: 1.10.2; 1.10.4;
Remove unused count from pseudo-device md.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.7.2; 1.7.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

branches: 1.5.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.3.4; 1.3.18; 1.3.22; 1.3.24; 1.3.28;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2; 1.1.4;
file GENERIC was initially added on branch ppcoea-renovation.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.26.12; 1.26.20; 1.26.30; 1.26.32; 1.26.34; 1.26.36;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

branches: 1.24.2; 1.24.4; 1.24.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.22.2; 1.22.4; 1.22.6;
Remove the tablet line discipline.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add (commented out) IPSEC_NAT_T option.

branches: 1.16.4; 1.16.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.13.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.12.4;
IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.10.6; 1.10.8;
Added commented out cgd(4)s to GENERIC configs.

enable USERCONF by default; it's small and extremely useful to have available.

branches: 1.8.2;
Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.7.2; 1.7.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Switch from de to tlp by default.

Remove last(?) traces of pmsi.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Remove ipip reference.

No longer need to define CACHELINESIZE here, and move NEWPMAP option
to std.mvmeppc since the old pmap module is not supported on mvmeppc.

branches: 1.1.2;
New port: NetBSD/mvmeppc

Based mostly on NetBSD/prep at this time since the earlier mvme160x
boards are pretty much PReP compliant. Later boards in the range
diverge somewhat from the reference platform, hence the separate port.

Still needs *lots* of bashing into shape, but at this time it will
boot to multi-user over ethernet on an MVME1603-051.

opt_mvmetype.h -> opt_mvmeconf.h to match mvme68k (which wins out because
it supports more boards).

Add support pci_intr_setattr.
Export non-inline version of pci api for modules (_MODULE is defined).
Fix definition of pc_conf_hook and pc_conf_interrupt.
Switch to using inlines instead of macros.
Switch ibm4xx to use <powerpc/pci_machdep.h>

Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

Interrupt handling changes, in discussion since February:

- Reduce available SPL levels for hardware devices to none, vm, sched, high.
- Acquire kernel_lock only for interrupts at IPL_VM.
- Implement threaded soft interrupts.

branches: 1.12.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.11.4; 1.11.12; 1.11.14; 1.11.16; 1.11.18;
include files.wsfb

branches: 1.10.26; 1.10.30; 1.10.32;
merge ktrace-lwp.

branches: 1.9.16;
Define maxpartitions to the same value as MAXPARTITIONS in disklabel.h.
[Down from 16 to 8, since disklabel.h still says 8.]
Addresses PR 24905 by Simon Burge.

Since everyone uses clock_subr.c (or should, if they don't currently),
list it in conf/files instead of in every port's files.*.

branches: 1.7.2;
Switch/adapt to new bus space infrastructure.

Remove port-specific procfs_machdep.c (since they are all identical and
a better one resides in powerpc/powerpc/).

Moved binary compatibility options from arch directory to cpu directory

now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.2.2; 1.2.6;
* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

branches: 1.1.2;
New port: NetBSD/mvmeppc

Based mostly on NetBSD/prep at this time since the earlier mvme160x
boards are pretty much PReP compliant. Later boards in the range
diverge somewhat from the reference platform, hence the separate port.

Still needs *lots* of bashing into shape, but at this time it will
boot to multi-user over ethernet on an MVME1603-051.

mark nsmb major obsolete

Systematize handling of removed drivers.

- Every driver that was removed and whose number hasn't already been
reused is now listed with a commented-out "obsolete" line.
- The format of these has been systematized. Future format changes can
probably be safely done with a script.
- This does not include a few cases of assignments that only lasted a
couple days, or stuff from before major reorgs. Some of these may
be included nonetheless, because there was a lot of ground to cover
and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

Restore satlink's majors entries commented out and marked obsolete.
Otherwise they might accidentally get reused later and cause a
security problem.

Remove the satlink driver. It was disabled everywhere, had no man page and
no use either. Spotted by thorpej in PR/21345, ok christos.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.20.52; 1.20.54;
dependant -> dependent

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.18.6; 1.18.10; 1.18.16; 1.18.18;
Remove systrace. Ok core@.

branches: 1.17.28; 1.17.34; 1.17.42;
s/independant/independent/, from Zafer.

branches: 1.16.20; 1.16.22;
merge ktrace-lwp.

make VMSWAP optional again.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

defflag VMSWAP.

branches: 1.12.2;
assign major for nsmb(4)

Change reference at bottom from sys/dev/majors to sys/conf/majors to match
reality

add major for 'ses' for archs which have the other scsi devices

reassing majors for crypto and pf to use the newly defined MI major
range

update the comment - the space for machine-dependant majors
is reduced to 0-143
follows discussion on tech-kern

Add some framework for MI assignment of device majors - add sys/dev/majors
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.

Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.

Follows recent discussion on tech-kern@

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

branches: 1.4.2;
Add ksyms device major.

branches: 1.3.2;
assign majors for raw and cooked cgd's.

branches: 1.2.2;
Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.1.2;
file majors.mvmeppc was initially added on branch gehenna-devsw.

merge ktrace-lwp.

include "conf/std".

branches: 1.7.16;
Remove SPILLSTK leftovers.

branches: 1.6.2;
Rename PPC_MPC6XX to PPC_OEA (and any mpc6xx reference to oea).

Perform a rototill of the powerpc code. Mandate use of SPRG0 to store
a pointer to current cpu's cpu_info structure. Use cpu_info for
intstk,intr_depth,still_stk,idle_pcb,curpcb,curlwp,etal even on
non-MULTIPROCESSOR machines. Add common macros GET_CPUINFO and
INIT_CPUINFO to get and initialize the cpu_info struct on startup. Make
ibm4xx use the standard <powerpc/frame.h>. Use IFRAME_xx in ibm4xx
trap_subr.S instead of explicit magic offsets. Move INTSTK and SPILLSTK
to std.<platform>. Change faultbuf to a struct instead of an array.

On MPC6XX cpus, stop using the vector page for temporary space and use
reserved space in cpu_info.

branches: 1.4.6;
Use a common genassym.cf for all the PPC_MPC6XX ports. Add a makeoptions to
std.foo to indicate the directory to get genassym.cf from. Add an intrframe
to <powerpc/frame.h> and make trap_subr.S use symbolic offsets into it.

switch all mpc6xx powerpc ports to NEWPMAP by default.
the old pmap is still available with the OLDPMAP option.

No longer need to define CACHELINESIZE here, and move NEWPMAP option
to std.mvmeppc since the old pmap module is not supported on mvmeppc.

branches: 1.1.2;
New port: NetBSD/mvmeppc

Based mostly on NetBSD/prep at this time since the earlier mvme160x
boards are pretty much PReP compliant. Later boards in the range
diverge somewhat from the reference platform, hence the separate port.

Still needs *lots* of bashing into shape, but at this time it will
boot to multi-user over ethernet on an MVME1603-051.