Add support for LCD-MONO framebuffer on NWS-32x0 laptop machines.

Tested on NWS-3260, which was sent from ryo@'s belongins and repaired
by me, and also tested on my NWS-3470D, including Xorg mono server.
(Note X.org server on NEWS machines requires keymap modifications)
Also add proper initialization on consinit() in NMB-253 case.

Worth to pull up to netbsd-10 and netbsd-9.

Specify -fno-unwind-tables to shrink kernel binaries.

branches: 1.47.4; 1.47.30;
bump ramdisk sizes to cope with GCC 7 bloat.

branches: 1.46.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

surf the bloat

branches: 1.44.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Bump the ramdisk size; the longer paths on the build cluster are
likely enough to put this over the edge.

remove confusing numeric locators where they are unused.

branches: 1.41.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.39.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.38.8;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.36.4; 1.36.6;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.35.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.34.16; 1.34.20; 1.34.22; 1.34.26;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.33.6;
Add options COMPAT_40.

branches: 1.32.6; 1.32.14; 1.32.16; 1.32.18;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.29.20; 1.29.22;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

branches: 1.25.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.23.2;
Add options COMPAT_20.

branches: 1.22.4;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.20.2;
Switch to use MI mk48txx(4) and todr(9) for MK48T02 todclocks on newsmips.

Add options COMPAT_16.

add rnd(4) device to installation media.
necessary for many purposes, including password seeding, tcp sequence number,
and more. see tech-security

branches: 1.17.2;
Use wildcard for scsibus at sc0.

enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

branches: 1.14.2; 1.14.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Expand MEMORY_DISK_ROOT_SIZE to 2.5Mbytes.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

Use sony8x16 fonts instead of gallant12x22.

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.6.4; 1.6.8;
Update for the install floppy:
- Add newer devices (wscons etc.)
- Add -mmemcpy to COPTS
- Reduce maxusers
- Remove KERNFS
- Disable some COMPAT_* options
- Add MEMORY_DISK_SERVER=0
- Enable options NFS_V2_ONLY and VNODE_OP_NOINLINE

branches: 1.5.2;
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.

Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.

Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

INSTALL kernel config.