PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

Disable rarely used options and devices, and add options MODULAR instead.

Also enable files-system MSDOS for file exchange via removable media.

Remove unnecessary commented out lines.

Remove nonexistent options SWAPDEBUG.

Enable file-system CD9660.

It's useful for installation especially on emulators.

Remove trailing spaces and TABs.

Remove trailing TABs.

next68k: Specify -fno-unwind-tables to shrink kernel binary size.

next68k bootloader cannot load a kernel larger than ~3.8 MB.

Driver for DaynaPORT SCSI/Link (dse.4).

Written by Hiroshi Noguchi, of which an updated version was posted to
port-mac68k in 2001.

Attachments were added to kernel configs for platforms that already had
the Cabletron (se.4) driver added, although other platorms may benefit.

Reviewed on tech-net by Izumi Tsutsui.

branches: 1.153.4;
UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.151.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

branches: 1.148.2;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.145.2; 1.145.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

Clarify serial port names. Affects zs(4) man page mentioned in PR/52377.

Actual port connection is briefly checked by "NeXT cube internal schematics"
http://web.archive.org/web/20091015214305/http://www.lrz-muenchen.de/~heller/NeXT/NeXT.html

branches: 1.140.10;
Remove KMEMSTATS.

branches: 1.139.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.135.2;
Use COPTS="-O2 -fno-reorder-blocks" as defined in sys.mk for userland.

Compile tests only.

branches: 1.134.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.133.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.127.2;
Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.125.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.124.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.123.4;
merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.122.2; 1.122.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.118.2; 1.118.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.116.2;
add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.113.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.111.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.110.6; 1.110.8; 1.110.10; 1.110.12;
Remove systrace. Ok core@.

branches: 1.109.2; 1.109.8;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.108.10;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.107.2; 1.107.8; 1.107.10; 1.107.16; 1.107.18;
Remove tmpfs's experimental status. OK'ed by core@.

branches: 1.106.2; 1.106.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.103.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.102.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.101.2; 1.101.4; 1.101.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.99.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.98.2; 1.98.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

turn off DEBUG and DIAGNOSTIC in GENERIC kernels so that they
are compatible with the LKMs that are part of the release.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.88.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.86.2;
Add COMPAT_20 (and COMPAT_16 in some cases) to kernel config files
that didn't have those options but had other earlier compat options.

Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.81.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.80.4;
Add COMPAT_BSDPTY on all the kernels that have COMPAT options.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.73.2;
Add P1003_1B_SEMAPHORE.

add COMPAT_15/COMPAT_16

branches: 1.71.2;
Add pseudo-device ksyms.

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

add SYSTRACE; approved perry.

FFS would help...

Enable SCSI target devices, and explicitly disable wide negotiation for esp.

enable USERCONF by default; it's small and extremely useful to have available.

Don't know whether it works, but enable the '030 support for the Hell of it.

Comprehensive patches from Christian Limpach:
* Fix problems with the DMA and SCSI drivers.
* Make turbo machines sort of work.
Additional fixes from me:
* Determine if we're a turbo at boot time, by looking at the ROM machine type.
* Set the display size correctly (1120 pixels wide, but padded to 1152 only on
non-turbo machines).
Caveats:
* SCSI doesn't work on the turbo (or at least it blows chunks with no devices
attached).
* Media selection doesn't work on the turbo (the BMAP stuff doesn't exist on
turbo machines).
* The boot block is prone to timing out.

Oops; add scsibus too.

Enable the SCSI driver.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.57.2; 1.57.4;
Comment out QUOTA as well. Suggested by Christian Limpach
in port-next68k/16792.
Applied even tho not strictly necessary, kernel nowadays actually
links with this option too.

Eliminate commons (including many used ones). Clean up variable references.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

The wsmux pseudo device does not need a count anymore.

branches: 1.45.6;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.43.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Fix various misspellings of compatible/compatibility.

switch next68k to ELF. highlight include:
add "%" prefix to register names in assembly code.
change assembly functions to return pointer values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.

comment out M68030, since we do not yet support NeXT 68030 computers

branches: 1.38.2;
Remove "rnd is EXPERIMENTAL" comments.

Add pseudo-device vlan

enable rnd device. they are now mandatory for ssh/sshd support,
so it makes more sense to enable it.
please disable them if there's any issues, but in that case, in-tree
ssh/sshd won't work.

add RCONS_BPP16 for color display

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.30.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

branches: 1.29.2;
add stf pseudo interface (commented out due to possible security risks)

enable COMPAT_M68K4K - works fine w/ native toolchain and pkgsrc m68k
cross toolchain. closes port-next68k/6726.

add comments to ZS_CONSOLE_ABORT and SERCONSOLE, and convert to
options<SPACE><TAB>NAME

Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.

Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.

Add commented out "ident"-command

Add overlay to kernel configs.

add files needed to use KGDB as suggested by Christian Limpach <chris@Nice.CH>

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

branches: 1.19.2; 1.19.8;
remove setting of WSDISPLAY_DEFAULTSCREENS

Make two wsmux pseudo devices and add mux locators.

It's time to be COMPAT_14.

enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!

Add COMPAT_SVR4 for m68k.

branches: 1.14.2; 1.14.4;
added kgdb support.

Disable non functional esp driver and scsi support.

Applied patches from Matt Debergalis <deberg@mit.edu>.
These patches include:
Added framebuffer mapping for color framebuffer to support color wscons
which is coming soon.
Renamed wskbdmap_mfii[ch] to wskbdmap_next[ch]
Changed video to be white on black instead of black on white.
Now handles and discards mouse interrupts.
Video and keyboard is now working on mono machines.

RCS ID police

use WSEMUL_VT100 instead of WSEMUL_SUN

wscons based console video & keyboard support for the NeXT
from Matt DeBergalis

Moved optional devices out of std.next68k and put them in GENERIC instead.
This is patch supplied in pr 6725.

Added options COMPAT_LINUX and EXEC_ELF32 as comments
to GENERIC configuration files.

Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Added a (commented out) configuration line for the RAIDframe device driver.

Moved UVM define from GENERIC to std.next68k
Added -Wno-main to warnflags, if compiler supports it.

Finished changes to use UVM on next68k.
Turn on UVM by default in GENERIC kernel.

remove options FIFO; it's now the default

branches: 1.1.1;
Initial revision