Remove ksyms from AGATE/DEBUG configs, it is defined in included default config.
Remove unneeded "channel ?" for atapibus* in DEBUG config.
Add "midi* at midibus?" needed for umidi to compile in DEBUG config.
Change SOFTFLOAT to FPEMUL in std.playstation2 (property was renamed).

playstation2 code was likely never fully restored/fixed and doesn't build, but
these changes would be needed in case someone will.

Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

branches: 1.12.6; 1.12.8;
Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.11.10; 1.11.16;
Remove support for NetBSD/playstation2.

branches: 1.10.72; 1.10.86;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

branches: 1.9.2; 1.9.4; 1.9.6;
merge ktrace-lwp.

branches: 1.8.12;
Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

If a playstation2 kernel config does "options KLOADER_KERNEL_PATH",
it now also needs to do "options KLOADER", ref. the new playstation2
machdep.c, so fix these kernel configs accordingly.

branches: 1.6.2;
netbsd.org -> NetBSD.org

All "netbsd.org" is now gone from src/sys/arch.

branches: 1.5.2;
fix linkage error.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

branches: 1.3.2;
integrate BUILTIN_KERNEL_LOADER and KERNE_PATH into KLOADER_KERNEL_PATH.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.1.4;
playstation2 port

Remove ksyms from AGATE/DEBUG configs, it is defined in included default config.
Remove unneeded "channel ?" for atapibus* in DEBUG config.
Add "midi* at midibus?" needed for umidi to compile in DEBUG config.
Change SOFTFLOAT to FPEMUL in std.playstation2 (property was renamed).

playstation2 code was likely never fully restored/fixed and doesn't build, but
these changes would be needed in case someone will.

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.27.6;
Remove uyap, USB YAP phone firmware loader.

And the associated ezload EZ-USB code, which is only used by uyap.
It could theoretically be used by other drivers, but none of them are
in tree.

I suspect that this device isn't in use, as phone technology has improved
a lot since 2001 when uyap(4) was added to the tree.

Proposed with no objections on netbsd-users on 13 April 2020

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

branches: 1.25.6;
Add ure(4) to kernel config files. Also add PHY drivers where necessary.

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

branches: 1.23.14; 1.23.16;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.20.2;
Add `pseudo-device ksyms' where `options DDB' is used, because
config(1)/config(5) can't handle module dependency correctly at this
moment.

(This is another proof that shared file definition (`file xxx.c a|b')
is a bad idea.)

Remove the KMEMSTATS option. It no longer exists.

branches: 1.18.6; 1.18.8;
Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.17.10; 1.17.16;
Remove support for NetBSD/playstation2.

branches: 1.16.72; 1.16.86;
Fix typo (Prolofic -> Prolific).

Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

branches: 1.14.2; 1.14.4; 1.14.6;
merge ktrace-lwp.

branches: 1.13.2;
Add ukyopon(4).

branches: 1.12.4; 1.12.10;
s/uax/axe/

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

If a playstation2 kernel config does "options KLOADER_KERNEL_PATH",
it now also needs to do "options KLOADER", ref. the new playstation2
machdep.c, so fix these kernel configs accordingly.

branches: 1.9.2; 1.9.4;
Add uax(4) (and url(4) in some cases).

enable USERCONF by default; it's small and extremely useful to have available.

branches: 1.7.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

branches: 1.4.2;
sync with uhidev change.

integrate BUILTIN_KERNEL_LOADER and KERNE_PATH into KLOADER_KERNEL_PATH.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.1.4;
playstation2 port

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

Use veriexec.config to reduce duplication

Bogus number police

branches: 1.11.4;
Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

branches: 1.10.6;
Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.9.10; 1.9.16;
Remove support for NetBSD/playstation2.

branches: 1.8.60; 1.8.74;
Remove obsolete #options VERIFIED_EXEC, found by grep(1).

branches: 1.7.4; 1.7.8; 1.7.18;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

branches: 1.6.12;
Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add (commented out) ALTQ options to all GENERIC-like files

branches: 1.4.2; 1.4.4;
fix linkage error.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

branches: 1.2.2;
Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

branches: 1.1.4;
playstation2 port

Simplify now that we have an internal toolchain

Force gcc to pass -msoft-float to the assembler (to make newer binutils
happy)

branches: 1.8.4; 1.8.6;
Add -msoft-float to AFLAGS as well

The correct toolchain tuple is mipsel--netbsd (not netbsdelf)

branches: 1.6.2;
Try with EXTERNAL_TOOLCHAIN instead of MISSING_TOOLCHAIN.
Still fails the same.

Adapt to current (and new pkgsrc toolchain)

Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.3.10; 1.3.16;
Remove support for NetBSD/playstation2.

branches: 1.2.2; 1.2.24; 1.2.122; 1.2.136;
s/TOOLDIR/EETOOLDIR/

branches: 1.1.4;
playstation2 port

branches: 1.13.6;
Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.12.10; 1.12.16;
Remove support for NetBSD/playstation2.

branches: 1.11.2;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.10.78; 1.10.86;
merge ktrace-lwp.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

If a playstation2 kernel config does "options KLOADER_KERNEL_PATH",
it now also needs to do "options KLOADER", ref. the new playstation2
machdep.c, so fix these kernel configs accordingly.

branches: 1.7.2; 1.7.4;
fix linkage error.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

branches: 1.3.2;
integrate BUILTIN_KERNEL_LOADER and KERNE_PATH into KLOADER_KERNEL_PATH.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.1.4;
playstation2 port

branches: 1.8.4;
Add missing OBJCOPY

The correct toolchain tuple is mipsel--netbsd (not netbsdelf)

branches: 1.6.2;
Try with EXTERNAL_TOOLCHAIN instead of MISSING_TOOLCHAIN.
Still fails the same.

Adapt to current (and new pkgsrc toolchain)

Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.3.10; 1.3.16;
Remove support for NetBSD/playstation2.

branches: 1.2.4; 1.2.6; 1.2.128; 1.2.142;
set & export MACHINE_CPU.

playstation2 port

Fix various typos, mainly in comments.

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.25.6; 1.25.30; 1.25.32;
Adapt to current (and new pkgsrc toolchain)

Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.23.10; 1.23.16;
Remove support for NetBSD/playstation2.

branches: 1.22.4;
Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

branches: 1.21.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.20.36; 1.20.40; 1.20.42; 1.20.46;
It doesn't make sense to specify "configuration" and "interface"
locators for uhub because a hub can't have sub-devices.
This might be sanity-checked eventually.
Same for ubt now after the change to device attachment.

branches: 1.19.14; 1.19.18; 1.19.20;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.18.2; 1.18.4; 1.18.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.16.2; 1.16.4; 1.16.6;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.11.6;
Add FFS_NO_SNAPSHOT - commented out in XEN

branches: 1.10.8; 1.10.10;
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add adabus.

branches: 1.8.2;
Add pseudo-device ksyms.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.6.2; 1.6.10; 1.6.12;
Update for new uhidev device attachment.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.4.2;
The wsmux pseudo device does not need a count anymore.

increase maxusers (8->16)

add wsmux to build kernel.

playstation2 port

branches: 1.21.6;
Adapt to current (and new pkgsrc toolchain)

Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.19.10; 1.19.16;
Remove support for NetBSD/playstation2.

Use bus_dmamem_common.

branches: 1.17.10; 1.17.24;
Since files.wscons et al. are included by ~all ports anyway, include
them in the mi "files" file, and remove include statements from md files.
These shouldn't pull in additional kernel code when not in use, so it
shouldn't do any harm except a risk of namespace collisions which
should be easy to fix.

branches: 1.16.30;
Convert playstation2 to todr and tc. This is not compile tested, as the
current tree isn't buildable even by the cross tools (which I lack), due
to C99. Approved in principle by martin@, simon@

branches: 1.15.20;
merge ktrace-lwp.

branches: 1.14.12;
MI part of kloader moved to dev/kloader.c from arch/hpc/hpc/
dreamcast and playstation2 port are changed to use this.

Backout previous -- this is not enough, config needs to be taught
how to reach partitions above h. Noted by Simon Burge, related to
PR 24905.

Define maxpartitions to the same value as MAXPARTITIONS in disklabel.h.
Addresses PR 24905 by Simon Burge.

Since everyone uses clock_subr.c (or should, if they don't currently),
list it in conf/files instead of in every port's files.*.

branches: 1.10.6;
now that mem_no is emitted by config(8), there is no reason to keep
copy of more or less identical iskmemdev() for every arch; move the function
to spec_vnop.c, and g/c machine-dependant copies

Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.8.2;
* Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
the magic "files include order" dance in N machine-dependent
configuration definitions.

All the mips ports had an identical procfs_machdep.c, so use a common
file under arch/mips/mips.

mips/mips/fp.S is in mips/conf/files.mips now.

branches: 1.5.2;
- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

integrate BUILTIN_KERNEL_LOADER and KERNE_PATH into KLOADER_KERNEL_PATH.

- replace "defopt" with "defparam" for options which must take a value,
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h

branches: 1.2.4;
cosmetic change.

playstation2 port

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.25.8;
mark nsmb major obsolete

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

branches: 1.23.6;
Systematize handling of removed drivers.

- Every driver that was removed and whose number hasn't already been
reused is now listed with a commented-out "obsolete" line.
- The format of these has been systematized. Future format changes can
probably be safely done with a script.
- This does not include a few cases of assignments that only lasted a
couple days, or stuff from before major reorgs. Some of these may
be included nonetheless, because there was a lot of ground to cover
and therefore not a lot of time to dig into history in detail.

Note that the obsolete listings do not mean the major numbers can
never be reused; that's up to portmasters and/or core. It does mean
that they won't be reused by accident, however, which in some cases
(depending on the driver, how widely used it was, its family of device
nodes, their default permissions, etc.) can be quite dangerous.

Note that some of the things now explicitly listed as obsolete are
really ancient history. My scan went back as far as when the majors
files were added. (But not before that.)

branches: 1.22.6; 1.22.32;
Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.21.10; 1.21.16;
Remove support for NetBSD/playstation2.

branches: 1.20.4;
Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.19.6; 1.19.10; 1.19.16; 1.19.18;
Remove systrace. Ok core@.

branches: 1.18.28; 1.18.34; 1.18.42;
s/independant/independent/, from Zafer.

branches: 1.17.20; 1.17.22;
merge ktrace-lwp.

make VMSWAP optional again.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

defflag VMSWAP.

branches: 1.13.2;
assign major for nsmb(4)

Change reference at bottom from sys/dev/majors to sys/conf/majors to match
reality

add wsfont major to archs which have the other wscons devices

add majors for ipfilter, lkm, vnd, tun, raid, cgd, ccd, and md
where missing

reassing majors for crypto and pf to use the newly defined MI major
range

update the comment - the space for machine-dependant majors
is reduced to 0-143
follows discussion on tech-kern

Add some framework for MI assignment of device majors - add sys/dev/majors
which is automatically included during kernel config, and add comments
to individual machine-dependant majors.* files to assign new MI majors
in MI file.

Range 0-191 is reserved for machine-specific assignments, range
192+ are MI assignments.

Follows recent discussion on tech-kern@

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

branches: 1.4.2;
Add ksyms device major.

branches: 1.3.2;
assign majors for raw and cooked cgd's.

branches: 1.2.2;
Merge the gehenna-devsw branch into the trunk.

This merge changes the device switch tables from static array to
dynamically generated by config(8).

- All device switches is defined as a constant structure in device drivers.

- The new grammer ``device-major'' is introduced to ``files''.

device-major <prefix> char <num> [block <num>] [<rules>]

- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.

- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.

- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.

- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.

- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.

branches: 1.1.2;
file majors.playstation2 was initially added on branch gehenna-devsw.

Remove ksyms from AGATE/DEBUG configs, it is defined in included default config.
Remove unneeded "channel ?" for atapibus* in DEBUG config.
Add "midi* at midibus?" needed for umidi to compile in DEBUG config.
Change SOFTFLOAT to FPEMUL in std.playstation2 (property was renamed).

playstation2 code was likely never fully restored/fixed and doesn't build, but
these changes would be needed in case someone will.

Sprinkle a few VMSWAP_DEFAULT_PLAINTEXT for architectures where we do not
have any spare cpu cycles to waste (encrypted swap still could be
enabled by the admin in /etc/sysctl.conf).

branches: 1.11.6; 1.11.48; 1.11.52;
Adapt to current (and new pkgsrc toolchain)

Bring back the playstation2 port - now that a toolchain for it is
available again.

branches: 1.9.10; 1.9.16;
Remove support for NetBSD/playstation2.

branches: 1.8.78; 1.8.92;
merge ktrace-lwp.

include "conf/std".

branches: 1.6.16;
add "makeoptions MACHINE_ARCH=..." in std.* for mips ports
where it is constant (to ease cross-building).

branches: 1.5.6;
Remove the explicit `makeoptions MACHINE_ARCH="mipse{b,l}"' for kernel
builds and use the endianness of the toolchain being used to determine
the endianness of the kernel.

remove MIPS3_L2CACHE_ABSENT option, since R5900 D-cache is 8KB
2-way. no need to worry about virtual aliasing.

branches: 1.3.2;
cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.2.4;
For MIPS kernel Makefiles, don't set ENDIAN in std.${MACHINE}. Instead,
explicitly set MACHINE_ARCH to the appropriate thing. Makefile.mips will
then set all of the internal variables it needs to accordingly.

playstation2 port