PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Adjust _all_ cinclude of *.local files

- Ensure always at end
- Use tab rather than spaces
- Add consistent comment
"Pull in optional local configuration - always at end"

The only functional change is that a local file which tried to
override an existing setting (eg with "no foo") would have failed
in some cases before, but now will work

Ensure GENERIC.local is always at the end of GENERIC

Where a GENERIC config had an existing inclusion of GENERIC.local,
ensure it is always at the end of the file, with a consistent
comment:

# Pull in optional local configuration
cinclude "arch/landisk/conf/GENERIC.local"

This allows GENERIC.local to correctly override all options

(This pass does not affect any GENERIC which did not already have
an include of GENERIC.local)

swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.44.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.41.4;
Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.39.2; 1.39.4;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.35.6;
PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.34.2; 1.34.4;
Remove KMEMSTATS.

branches: 1.33.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Comment out wscons related options.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.28.6;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.27.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.21.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.18.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.17.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.15.2; 1.15.4;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.11.2; 1.11.4;
Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.9.2;
add COMPAT_50 to all the configs with COMPAT_40.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.6.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.4.4;
Add options COMPAT_40 to files which have options COMPAT_30.

branches: 1.3.2; 1.3.4; 1.3.6;
Remove GENERIC.local from the repository

Make all the kernels that currently include their corresponding GENERIC.local
file use the cinclude directive instead of include. This way config(1) will
not complain if the file cannot be found.

After doing this, remove the GENERIC.local files from the repository so that
the user will not see modified files during updates, and local changes to
them cannot end up in the repository by mistake.

Discussed in tech-kern@ earlier this month. No strong objections.

branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8; 1.2.12;
Remove systrace. Ok core@.

branches: 1.1.2;
Import the rs6000 port into the tree.

This port of NetBSD is intended to run on MCA-based IBM RS/6000
machines. The port so far has only been tested on a 7006-41T, which is a
601-based RS/6000. The port also contains a limited set of code for the
7012-3XX machines, but support for those is a long way off still.

The port builds and generates a working kernel, however, it still lacks
bus_dma code for the MCA bus, so at present, only the com ports work,
though any other device (such as the printer/keyboard) located on the
ioplanar could probably be made to work. Work will continue on this port
as I iron out the DMA code.

This port was made possible by a generous gonation of hardware by Kevin
Bowling, who also provided much of the documentation for the port.