| History log of /src/sys/arch/sandpoint/conf/KUROBOX |
| Revision | | Date | Author | Comments |
| 1.9 |
| 25-Mar-2021 |
rin | At least KuroBox Classic and HG seem to have buggy UART, for which
ETXRDY interrupts are sometimes (once per a few hours?) lost; TX stalls
until next RX arrives.
Since interrupt-based I/O works just fine for other devices, I believe
this problem is due to UART and not to PIC or its driver.
In order to work around this bug, enable COM_HW_BROKEN_ETXRDY bit, as
well as carry out polling once per 10 sec or 1k tics (arbitrary, but
1 min seems too long).
XXX
Apply this for other MPC824x-based boards?
|
| 1.8 |
| 03-Jan-2020 |
thorpej | branches: 1.8.8; 1.8.10;
Eliminate all of the #ifdefs for the "strtc" driver. Define model
properties (similar to what the "dsrtc" driver does), and provide
DT compat strings corresponding to those models. Allow config flags
to specify the model for non-FDT platforms (also like "dsrtc").
|
| 1.7 |
| 21-Sep-2015 |
phx | branches: 1.7.18;
Remove erroneously entered debug options.
|
| 1.6 |
| 21-Sep-2015 |
phx | double vlan pseudo-device removed
|
| 1.5 |
| 12-May-2012 |
nisimura | branches: 1.5.16;
More "no" designations to reflect the target NAS hardware configuration.
Is provided as a reference for other NAS platforms. Before-after
factor is the 91% fitness.
|
| 1.4 |
| 14-Jan-2012 |
phx | New device nhpow(4) to support the onboard GPIO pins on a NH230/231 board for
buttons, powerdown, reset, LEDs and fan control. It attaches gpio(4) for
its 8 pins on demand.
|
| 1.3 |
| 09-Jun-2010 |
phx | branches: 1.3.2; 1.3.4; 1.3.12; 1.3.16;
The sandpoint port is now focussed on 824x based NAS boxes.
Replaced GENERIC by GENERIC.NAS.
Added INSTALL_KURO for KuroBox.
GENERIC.NAS and RAMDISK are no longer needed.
|
| 1.2 |
| 29-May-2010 |
phx | branches: 1.2.2;
'satmgr' device for communicating with the satellite processor found on many
MPC824x-based systems. It registers the power button to sysmon and sets
a reboot/shutdown callback for cpu_reboot(). Other functions can be controlled
through /dev/satmgr.
Currently there is support for KuroBox and Synology, which will be extended
as soon more platforms have been reasearched.
This patch was submitted by Toru Nishimura.
|
| 1.1 |
| 17-May-2010 |
phx | Excluded KUROBOX from GENERIC.NAS because console is on a different port.
Add INET6 option to GENERIC(.NAS).
Build KUROBOX kernel together with GENERIC and GENERIC.NAS.
Patch submitted by Toru Nishimura.
|
| 1.2.2.3 |
| 03-Jul-2010 |
rmind | sync with head
|
| 1.2.2.2 |
| 30-May-2010 |
rmind | sync with head
|
| 1.2.2.1 |
| 29-May-2010 |
rmind | file KUROBOX was added on branch rmind-uvmplock on 2010-05-30 05:17:05 +0000
|
| 1.3.16.2 |
| 02-Jun-2012 |
mrg | sync to latest -current.
|
| 1.3.16.1 |
| 18-Feb-2012 |
mrg | merge to -current.
|
| 1.3.12.2 |
| 23-May-2012 |
yamt | sync with head.
|
| 1.3.12.1 |
| 17-Apr-2012 |
yamt | sync with head
|
| 1.3.4.2 |
| 17-Aug-2010 |
uebayasi | Sync with HEAD.
|
| 1.3.4.1 |
| 09-Jun-2010 |
uebayasi | file KUROBOX was added on branch uebayasi-xip on 2010-08-17 06:45:06 +0000
|
| 1.3.2.2 |
| 11-Aug-2010 |
yamt | sync with head.
|
| 1.3.2.1 |
| 09-Jun-2010 |
yamt | file KUROBOX was added on branch yamt-nfs-mp on 2010-08-11 22:52:38 +0000
|
| 1.5.16.1 |
| 27-Dec-2015 |
skrll | Sync with HEAD (as of 26th Dec)
|
| 1.7.18.1 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.8.10.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
| 1.8.8.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
