Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.9.30; 1.9.38; 1.9.48; 1.9.50; 1.9.52; 1.9.54;
merge ktrace-lwp.

branches: 1.8.12;
remove some typecasts to "cfmatch_t" which are obviously relicts from
__BROKEN_INDIRECT_CONFIG times

pass string length (= boundary info) to pci_devinfo so that we do not run over
the end of memory region

__KERNEL_RCSID()

branches: 1.5.6;
Add trailing ; to CFATTACH_DECL.

Use CFATTACH_DECL().

Declare all cfattach structures const.

Match MPC107, too.

branches: 1.1.2; 1.1.6; 1.1.10;
Support for the Motorola Sandpoint reference platform using the
MPC8240 processor module. See the README for more information.

Remove unnecessary <sys/malloc.h>.

remove checks for failure after memory allocation calls that cannot fail:

kmem_alloc() with KM_SLEEP
kmem_zalloc() with KM_SLEEP
percpu_alloc()
pserialize_create()
psref_class_create()

all of these paths include an assertion that the allocation has not failed,
so callers should not assert that again.

PCI MSI/MSI-X manipulation stub functions are not provided as weak alias.

Added MSI/MSI-X and interrupt_distribute(9) support for powerpc.

branches: 1.34.2;
PCI Extended Configuration stuff written by nonaka@:
- Add PCI Extended Configuration Space support into x86.
- Check register offset of pci_conf_read() in MD part. It returns (pcireg_t)-1
if it isn't accessible.
- Decode Extended Capability in PCI Extended Configuration Space.
Currently the following extended capabilities are decoded:
- Advanced Error Reporting
- Virtual Channel
- Device Serial Number
- Power Budgeting
- Root Complex Link Declaration
- Root Complex Event Collector Association
- Access Control Services
- Alternative Routing-ID Interpretation
- Address Translation Services
- Single Root IO Virtualization
- Page Request
- TPH Requester
- Latency Tolerance Reporting
- Secondary PCI Express
- Process Address Space ID
- LN Requester
- L1 PM Substates
The following extended capabilities are not decoded yet:
- Root Complex Internal Link Control
- Multi-Function Virtual Channel
- RCRB Header
- Vendor Unique
- Configuration Access Correction
- Multiple Root IO Virtualization
- Multicast
- Resizable BAR
- Dynamic Power Allocation
- Protocol Multiplexing
- Downstream Port Containment
- Precision Time Management
- M-PCIe
- Function Reading Status Queueing
- Readiness Time Reporting
- Designated Vendor-Specific

branches: 1.33.6;
make pci_intr_string and eisa_intr_string take a buffer and a length
instead of relying in local static storage.

fix sprintf.

branches: 1.31.6; 1.31.10;
Add a workaround for the VT6410 IDE controller on the Iomega Storcenter.
Its interrupt cannot be disabled and remains asserted during the whole
device probing procedure, causing an interrupt storm.
This was fixed by establishing an edge-triggered interrupt for it, so it
will trigger only once during probing.
This workaround makes the WDC_NO_IDS option obsolete, which was removed
from the GENERIC config.

branches: 1.30.4;
Fixed PCI line to EPIC IRQ mapping for Iomega Storcenter.

branches: 1.29.2;
#include <sys/bus.h> instead of <machine/bus.h>.

struct device * -> device_t
struct cfdata * -> cfdata_t
use device accessors, use device_private.
some softc/device_t splits (macppc needs a bunch more)
aprint*_dev used considerably more

branches: 1.27.2;
Detect QNAP board last, because a Realtek chip at pci device 15 is used
on several boards.

Neither pci_dma64_available(), pci_probe_device(), pci_mapreg_map(9),
pci_find_rom(), pci_intr_map(9), pci_enumerate_bus(), nor the match
predicate passed to pciide_compat_intr_establish() should ever modify
their pci_attach_args argument, so make their pci_attach_args arguments
const and deal with the fallout throughout the kernel.

For the most part, these changes add a 'const' where there was no
'const' before, however, some drivers and MD code used to modify
pci_attach_args. Now those drivers either copy their pci_attach_args
and modify the copy, or refrain from modifying pci_attach_args:

Xen: according to Manuel Bouyer, writing to pci_attach_args in
pci_intr_map() was a leftover from Xen 2. Probably a bug. I
stopped writing it. I have not tested this change.

siside(4): sis_hostbr_match() needlessly wrote to pci_attach_args.
Probably a bug. I use a temporary variable. I have not tested this
change.

slide(4): sl82c105_chip_map() overwrote the caller's pci_attach_args.
Probably a bug. Use a local pci_attach_args. I have not tested
this change.

viaide(4): via_sata_chip_map() and via_sata_chip_map_new() overwrote the
caller's pci_attach_args. Probably a bug. Make a local copy of the
caller's pci_attach_args and modify the copy. I have not tested
this change.

While I'm here, make pci_mapreg_submap() static.

With these changes in place, I have tested the compilation of these
kernels:

alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-eb NSLU2
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE GUMSTIX
HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321 IXDP425 IXM1200
KUROBOX_PRO LUBBOCK MARVELL_NAS NAPPI SHEEVAPLUG SMDK2800 TEAMASA_NPWR
TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sgimips GENERIC32_IP2x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

As of Sun Apr 3 15:26:26 CDT 2011, I could not compile these kernels
with or without my patches in place:

### evbmips-el GDIUM

nbmake: nbmake: don't know how to make /home/dyoung/pristine-nbsd/src/sys/arch/mips/mips/softintr.c. Stop

### evbarm-el MPCSA_GENERIC
src/sys/arch/evbarm/conf/MPCSA_GENERIC:318: ds1672rtc*: unknown device `ds1672rtc'

### ia64 GENERIC

/tmp/genassym.28085/assym.c: In function 'f111':
/tmp/genassym.28085/assym.c:67: error: invalid application of 'sizeof' to incomplete type 'struct pcb'
/tmp/genassym.28085/assym.c:76: error: dereferencing pointer to incomplete type

### sgimips GENERIC32_IP3x

crmfb.o: In function `crmfb_attach':
crmfb.c:(.text+0x2304): undefined reference to `ddc_read_edid'
crmfb.c:(.text+0x2304): relocation truncated to fit: R_MIPS_26 against `ddc_read_edid'
crmfb.c:(.text+0x234c): undefined reference to `edid_parse'
crmfb.c:(.text+0x234c): relocation truncated to fit: R_MIPS_26 against `edid_parse'
crmfb.c:(.text+0x2354): undefined reference to `edid_print'
crmfb.c:(.text+0x2354): relocation truncated to fit: R_MIPS_26 against `edid_print'

Recognize QNAP V200 board, used in the TS-201 and newer TS-101 models.

DLink DSM-G600 IDSEL-14 (USB) needs special handling: Pin A is mapped to
EPIC-IRQ 1, but Pin C must be mapped to IRQ 2.

add EPIC definition for Netronics NH230/NH231 and the brothers.

- add D-Link EPIC defition to pci_machdep.c
- change the way to reboot/pwroff to make satmgr.c more flexible for
a multiple byte sat protocol.

add StorCenter heuristic by PCI vendor ID detection.

branches: 1.20.2; 1.20.4;
Move counting of faults, traps, intrs, soft[intr]s, syscalls, and nswtch
from uvmexp to per-cpu cpu_data and move them to 64bits. Remove unneeded
includes of <uvm/uvm_extern.h> and/or <uvm/uvm.h>.

QNAP support (untested): PCI fixup and corrected PCI address lines (+1).
Patch submitted by Toru Nishimura.

Disable EPIC_DEBUGIRQ. Reenable when needed.

branches: 1.17.2; 1.17.4;
- fix EUMB com console attach case.
- #ifdef out pci_conf_interrupt() for PCI_NETBSD_CONFIGURE option.
Requested and tested by kiyohara.

pci_intr_setattr(), allows PCI interrupts to be marked MPSAFE on x86, and
other platforms if the code is added.

pci_intr_map(...)
pci_intr_setattr(pc, ih, PCI_INTR_MPSAFE, 1);
pci_intr_establish(...)

branches: 1.15.14; 1.15.16; 1.15.18; 1.15.20;
- SandpointX3 practices serial mode EPIC with the help of special
FPGA circuit. pin A input only; pin B/C/D are not counted in.
- With EnCorePP1 heuristics find that i82559 (AD25) responds to EPIC 2.

branches: 1.14.2;
- copy intr.h from prep and make mods.
- ANSI-fy pci_machdep.c

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.12.30; 1.12.38; 1.12.48; 1.12.50; 1.12.52; 1.12.54;
merge ktrace-lwp.

branches: 1.11.16;
__KERNEL_RCSID()

branches: 1.10.6;
remove trailing \n in panic(). approved perry.

Only attempt to handle mapping IDE interrupts if we are in SERIAL mode.

branches: 1.8.2; 1.8.4;
Map winbond interrupts.

branches: 1.7.2;
pci_conf_interrupt() takes bus/dev/pin, not bus/dev/func.

branches: 1.6.4;
- Change default time frequency to 100MHz from 66MHz.
- Support the serial mode interrupts (with a kernel configuration option)
on the Sandpoint X3.
- Initialize cpu_timebase.
- Enable tulip driver.

"wierd" is weird.

branches: 1.4.2;
Adapt to new PowerPC pmap.
Use more common PowerPC code including bus_dma and unified bus_space.

delint: don't try & return something from void pci_intr_disestablish()

branches: 1.2.2; 1.2.4;
Handle setting the proper interrupt line for devices behind bridges.

Support for the Motorola Sandpoint reference platform using the
MPC8240 processor module. See the README for more information.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.13.30; 1.13.38; 1.13.48; 1.13.50; 1.13.52; 1.13.54;
merge ktrace-lwp.

branches: 1.12.12;
fix a botch in config_found->config_found_ia transition,
by Havard Eidnes

Phase out the use of a string as first "attach args" member to control
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.

pass string length (= boundary info) to pci_devinfo so that we do not run over
the end of memory region

__KERNEL_RCSID()

branches: 1.8.2;
Adapt to powerpc/bus.h changes.

Use aprint_normal() for cfprint routines.

Add trailing ; to CFATTACH_DECL.

Use CFATTACH_DECL().

Declare all cfattach structures const.

branches: 1.3.6;
bcopy -> memcpy, bzero -> memset

branches: 1.2.2;
Adapt to new PowerPC pmap.
Use more common PowerPC code including bus_dma and unified bus_space.

branches: 1.1.2; 1.1.4;
Support for the Motorola Sandpoint reference platform using the
MPC8240 processor module. See the README for more information.

Make this distinguishable with native PCI interrupt.

Switch to intr_establish_xname().

branches: 1.5.66;
struct device * -> device_t
struct cfdata * -> cfdata_t
use device accessors, use device_private.
some softc/device_t splits (macppc needs a bunch more)
aprint*_dev used considerably more

branches: 1.4.2;
Neither pci_dma64_available(), pci_probe_device(), pci_mapreg_map(9),
pci_find_rom(), pci_intr_map(9), pci_enumerate_bus(), nor the match
predicate passed to pciide_compat_intr_establish() should ever modify
their pci_attach_args argument, so make their pci_attach_args arguments
const and deal with the fallout throughout the kernel.

For the most part, these changes add a 'const' where there was no
'const' before, however, some drivers and MD code used to modify
pci_attach_args. Now those drivers either copy their pci_attach_args
and modify the copy, or refrain from modifying pci_attach_args:

Xen: according to Manuel Bouyer, writing to pci_attach_args in
pci_intr_map() was a leftover from Xen 2. Probably a bug. I
stopped writing it. I have not tested this change.

siside(4): sis_hostbr_match() needlessly wrote to pci_attach_args.
Probably a bug. I use a temporary variable. I have not tested this
change.

slide(4): sl82c105_chip_map() overwrote the caller's pci_attach_args.
Probably a bug. Use a local pci_attach_args. I have not tested
this change.

viaide(4): via_sata_chip_map() and via_sata_chip_map_new() overwrote the
caller's pci_attach_args. Probably a bug. Make a local copy of the
caller's pci_attach_args and modify the copy. I have not tested
this change.

While I'm here, make pci_mapreg_submap() static.

With these changes in place, I have tested the compilation of these
kernels:

alpha GENERIC
amd64 GENERIC XEN3_DOM0
arc GENERIC
atari HADES MILAN-PCIIDE
bebox GENERIC
cats GENERIC
cobalt GENERIC
evbarm-eb NSLU2
evbarm-el ADI_BRH ARMADILLO9 CP3100 GEMINI GEMINI_MASTER GEMINI_SLAVE GUMSTIX
HDL_G IMX31LITE INTEGRATOR IQ31244 IQ80310 IQ80321 IXDP425 IXM1200
KUROBOX_PRO LUBBOCK MARVELL_NAS NAPPI SHEEVAPLUG SMDK2800 TEAMASA_NPWR
TEAMASA_NPWR_FC TS7200 TWINTAIL ZAO425
evbmips-el AP30 DBAU1500 DBAU1550 MALTA MERAKI MTX-1 OMSAL400 RB153 WGT624V3
evbmips64-el XLSATX
evbppc EV64260 MPC8536DS MPC8548CDS OPENBLOCKS200 OPENBLOCKS266
OPENBLOCKS266_OPT P2020RDB PMPPC RB800 WALNUT
hp700 GENERIC
i386 ALL XEN3_DOM0 XEN3_DOMU
ibmnws GENERIC
macppc GENERIC
mvmeppc GENERIC
netwinder GENERIC
ofppc GENERIC
prep GENERIC
sandpoint GENERIC
sgimips GENERIC32_IP2x
sparc GENERIC_SUN4U KRUPS
sparc64 GENERIC

As of Sun Apr 3 15:26:26 CDT 2011, I could not compile these kernels
with or without my patches in place:

### evbmips-el GDIUM

nbmake: nbmake: don't know how to make /home/dyoung/pristine-nbsd/src/sys/arch/mips/mips/softintr.c. Stop

### evbarm-el MPCSA_GENERIC
src/sys/arch/evbarm/conf/MPCSA_GENERIC:318: ds1672rtc*: unknown device `ds1672rtc'

### ia64 GENERIC

/tmp/genassym.28085/assym.c: In function 'f111':
/tmp/genassym.28085/assym.c:67: error: invalid application of 'sizeof' to incomplete type 'struct pcb'
/tmp/genassym.28085/assym.c:76: error: dereferencing pointer to incomplete type

### sgimips GENERIC32_IP3x

crmfb.o: In function `crmfb_attach':
crmfb.c:(.text+0x2304): undefined reference to `ddc_read_edid'
crmfb.c:(.text+0x2304): relocation truncated to fit: R_MIPS_26 against `ddc_read_edid'
crmfb.c:(.text+0x234c): undefined reference to `edid_parse'
crmfb.c:(.text+0x234c): relocation truncated to fit: R_MIPS_26 against `edid_parse'
crmfb.c:(.text+0x2354): undefined reference to `edid_print'
crmfb.c:(.text+0x2354): relocation truncated to fit: R_MIPS_26 against `edid_print'

branches: 1.3.4; 1.3.6;
ANSIfy functions with function-pointer arguments

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.26; 1.2.34; 1.2.40;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.1.2; 1.1.6; 1.1.8; 1.1.10;
file pciide_machdep.c was initially added on branch ppcoea-renovation.