UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.79.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Use "-fno-unwind-tables" to shrink binaries more.

sun3 GENERIC -Os
text data bss dec hex filename
1762862 75292 93032 1931186 1d77b2 netbsd

sun3 GENERIC -Os -fno-unwind-tables
text data bss dec hex filename
1545726 75292 93032 1714050 1a2782 netbsd

GENERIC is tested on TME.

branches: 1.76.4;
Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.74.2; 1.74.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 1.

Remove the KMEMSTATS option. It no longer exists.

branches: 1.71.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

Enable ie0 in DISKLESS for sun3/110

Sync (commented out) some of the network and filesystem related
blocks from GENERIC. Only functional change is to comment out tun
in DISKLESS to match GENERIC.

branches: 1.67.4;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.66.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.63.2; 1.63.8; 1.63.12;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.61.4; 1.61.6; 1.61.8;
Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.60.2;
Add options COMPAT_50.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.58.4; 1.58.10; 1.58.12;
Always specify COPTS="-Os" and disable several options and devices
to shrink kernels. Current sun68k bootloader can't load a kernel larger
than ~2MB, and our ever growing kernel have been reached the limit.

branches: 1.57.16;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.56.6;
- add options COMPAT_40
- use options<space><tab>

branches: 1.55.8; 1.55.16; 1.55.20; 1.55.22;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.54.2; 1.54.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.53.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.51.2; 1.51.4; 1.51.6;
merge ktrace-lwp.

typo in comment. (since 1994?!)

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.45.8;
Remove options COMPAT_15 and add options COMPAT_20.

branches: 1.44.4;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.42.2;
add COMPAT_15/COMPAT_16

branches: 1.41.2;
Bye Bye UCONSOLE

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.38.2; 1.38.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.33.2; 1.33.4; 1.33.8;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Fix various misspellings of compatible/compatibility.

branches: 1.31.2;
switch sun3 to ELF. highlight include:
add "%" prefix to register names in assembly code.
change assembly functions to return values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.29.2;
It's time to be COMPAT_14.

branches: 1.28.2; 1.28.4;
Slim this down so it can be used as an Xkernel.

remove options FIFO; it's now the default

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x
Configure P4 frame buffers at the address of their P4 reg.
Move messy Sun3 bw2 and cg4 configs to included files.

Merge arch/sun3x into arch/sun3

Add NFS_BOOT_BOOTPARAM (fixes PR#4904)

branches: 1.23.2;
Sync with GENERIC

Add COMPAT_13.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

branches: 1.20.2;
Sync with GENERIC

clean up whitespace use

Sync up with changes in GENERIC

branches: 1.17.4;
Adopt for new file system and root spec grammar.

branches: 1.16.2;
Move SWAPPAGER, VNODEPAGER, DEVPAGER to std.sun3

Merge netbsd-1-2 branch back into mainline.

Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes

add COMPAT_12.

branches: 1.12.4;
New autoconfig design that controls attach order.

Switch to ncr_si (will just do PIO for now) and cleanup

branches: 1.10.2;
Add RAMDISK, move some things around.
Add rd*, xd*, xy* (only rd is done).

Set TIMEZONE=0, DST=0 (which is correct for the hardware clock).

Put back SYMTAB_SPACE so the distributed kernels will have symbols when
loaded by the SunOS boot program. Our netboot works, but our ufsboot
still has a problem on the 3/260, so keep SunOS boot support for now.

Retool for native build.

Sync with GENERIC

Move FPCOPROC out of std.sun3

New autoconfig interface to support VME, etc.

Lots of changes. Fairly stable now.

new RCS ID format.

branches: 1.1.2;
My config file for testing.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.61.2;
Use "-fno-unwind-tables" to shrink binaries more.

sun3 GENERIC -Os
text data bss dec hex filename
1762862 75292 93032 1931186 1d77b2 netbsd

sun3 GENERIC -Os -fno-unwind-tables
text data bss dec hex filename
1545726 75292 93032 1714050 1a2782 netbsd

GENERIC is tested on TME.

branches: 1.60.4;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.59.2; 1.59.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 1.

Remove the KMEMSTATS option. It no longer exists.

branches: 1.56.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

G/C PFIL_HOOKS from the kernel configs.

branches: 1.53.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.50.2; 1.50.12;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.48.4; 1.48.6; 1.48.8;
Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.47.2;
Add options COMPAT_50.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.45.4; 1.45.10; 1.45.12;
Always specify COPTS="-Os" and disable several options and devices
to shrink kernels. Current sun68k bootloader can't load a kernel larger
than ~2MB, and our ever growing kernel have been reached the limit.

branches: 1.44.16;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.43.6;
- add options COMPAT_40
- use options<space><tab>

branches: 1.42.8; 1.42.16; 1.42.20; 1.42.22;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.41.2; 1.41.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.40.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.38.2; 1.38.4; 1.38.6;
merge ktrace-lwp.

typo in comment. (since 1994?!)

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.32.8;
Remove options COMPAT_15 and add options COMPAT_20.

branches: 1.31.4;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.29.2;
add COMPAT_15/COMPAT_16

branches: 1.28.2;
Bye Bye UCONSOLE

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.25.2; 1.25.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.20.2; 1.20.8;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Fix various misspellings of compatible/compatibility.

branches: 1.18.2;
switch sun3 to ELF. highlight include:
add "%" prefix to register names in assembly code.
change assembly functions to return values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.16.2;
It's time to be COMPAT_14.

branches: 1.15.2; 1.15.4;
Slim this down so it can be used as an Xkernel.

remove options FIFO; it's now the default

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x
Configure P4 frame buffers at the address of their P4 reg.
Move messy Sun3 bw2 and cg4 configs to included files.

Merge arch/sun3x into arch/sun3

branches: 1.11.4;
Add COMPAT_13.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

Sync with GENERIC

Sync with GENERIC

branches: 1.7.4;
Things are stable enough that DDB, PMAP_DEBUG and DIAGNOSTIC aren't needed
anymore.

cleanup use of whitespace

No longer need SYMTAB_SPACE now that sun3x/stand/* works.
(Thanks, Jeremy!)

Fixed address for bwtwo framebuffer.

Fix some comments

branches: 1.2.2;
Adopt for new file system and root spec grammar.

branches: 1.1.1;
Initial revision

s/ommit/omit/ in comment.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.52.6;
Just include GENERIC and use <no> keyword of config(9).

branches: 1.51.8; 1.51.16; 1.51.20; 1.51.22;
- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.50.2; 1.50.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

branches: 1.49.2;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.47.2; 1.47.4; 1.47.6;
Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

typo in comment. (since 1994?!)

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

branches: 1.41.6;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.38.2;
Remove options COMPAT_15 and add options COMPAT_20.

branches: 1.37.4;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.35.2;
add COMPAT_15/COMPAT_16

branches: 1.34.2;
Bye Bye UCONSOLE

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.31.2; 1.31.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.26.2; 1.26.8;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Fix various misspellings of compatible/compatibility.

branches: 1.24.2;
switch sun3 to ELF. highlight include:
add "%" prefix to register names in assembly code.
change assembly functions to return values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.

Remove "rnd is EXPERIMANTAL" comments.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.21.2;
It's time to be COMPAT_14.

branches: 1.20.2; 1.20.4;
sync with GENERIC

remove options FIFO; it's now the default

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x
Configure P4 frame buffers at the address of their P4 reg.
Move messy Sun3 bw2 and cg4 configs to included files.

Merge arch/sun3x into arch/sun3

Add NFS_BOOT_BOOTPARAM (fixes PR#4904)

branches: 1.15.2;
Add config flags for tty[cd] to set TIOCFLAG_SOFTCAR.
Remove the framebuffer devices (not useful here).

Remove the config flags from "si" lines so the driver default will
be used. That also makes it possible to patch the kernel in case
the default option causes boot failures or something...

Sync with GENERIC

Add COMPAT_13.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

branches: 1.10.8;
clean up whitespace use

Sync up with changes in GENERIC

Actually works now.

branches: 1.7.2;
Adopt for new file system and root spec grammar.

branches: 1.6.2;
rename: ramdisk => md

Move SWAPPAGER, VNODEPAGER, DEVPAGER to std.sun3

Merge netbsd-1-2 branch back into mainline.

Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes

add COMPAT_12.

branches: 1.1.4;
Document how to configure a kernel with ttyc,ttyd instead of kbd/ms

Disable more several pseudo-devices to shrink binary size.

My 3/60 fails to boot from a SCSI disk without this change.
https://mail-index.netbsd.org/port-sun3/2024/01/13/msg000207.html

Should be pulled up to netbsd-10.

Revert mistaken "no obmem0" that I added when enabling UFS_DIRHASH.

Thanks tsutsui@ for pointing this out.

Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

branches: 1.189.4;
swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.186.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Build in debug symbols.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Use "-fno-unwind-tables" to shrink binaries more.

sun3 GENERIC -Os
text data bss dec hex filename
1762862 75292 93032 1931186 1d77b2 netbsd

sun3 GENERIC -Os -fno-unwind-tables
text data bss dec hex filename
1545726 75292 93032 1714050 1a2782 netbsd

GENERIC is tested on TME.

branches: 1.181.2;
Use veriexec.config to reduce duplication

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.178.2;
also disable SYSCTL_INCLUDE_DESCR.
copy sun3 disables to sun3x mostly. it has the same ufsboot 2MB limit.

branches: 1.177.2;
sun2/sun3:
- build libkern as an archive for non modular builds. from maya@
sun3:
- cut down GENERIC a bunch to bring below 2MB.
- reduce UBC_NWINS, MAXEXEC, and PAGER_MAP_DEFAULT_SIZE to recover
enough lost VA to actually run basic tests.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 1.

branches: 1.172.10;
Remove KMEMSTATS.

branches: 1.171.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Create an "options MODULAR_DEFAULT_AUTOLOAD" config option and add
it to all kernel configs that contain "options MODULAR". This
option turns on module autoloading by default (which is the current
default). This allows people who don't want module autoloading on
by default to disable it by simply removing/commentting this line.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.166.6;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.165.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.159.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.157.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.156.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.154.2; 1.154.4;
Xref module(7) in comments.

Remove unused count from pseudo-device md.

Add commented out options MODULAR.

enable DDB_HISTORY_SIZE in a few more configs where DDB is enabled.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.148.4; 1.148.6;
Add options COMPAT_50.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.145.2;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.143.4; 1.143.6; 1.143.10;
Always specify COPTS="-Os" and disable several options and devices
to shrink kernels. Current sun68k bootloader can't load a kernel larger
than ~2MB, and our ever growing kernel have been reached the limit.

branches: 1.142.6;
Remove systrace. Ok core@.

branches: 1.141.2; 1.141.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.139.4; 1.139.6; 1.139.10;
- add options COMPAT_40
- use options<space><tab>

branches: 1.138.2; 1.138.4;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

branches: 1.137.2; 1.137.8; 1.137.10; 1.137.16; 1.137.18;
Remove tmpfs's experimental status. OK'ed by core@.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.135.2; 1.135.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.132.2;
Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.131.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.130.2; 1.130.4; 1.130.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.128.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.127.2; 1.127.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

cosmetics.

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

typo in comment. (since 1994?!)

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.116.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.114.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.110.2;
Remove options COMPAT_15 and add options COMPAT_20.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.108.4;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.101.2;
add COMPAT_15/COMPAT_16

branches: 1.100.2;
Add pseudo-device ksyms.

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.91.2; 1.91.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.82.6;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.80.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

Fix various misspellings of compatible/compatibility.

branches: 1.77.2;
switch sun3 to ELF. highlight include:
add "%" prefix to register names in assembly code.
change assembly functions to return values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.

Remove "rnd is EXPERIMENTAL" comments.

Add pseudo-device vlan

enable rnd device. they are now mandatory for ssh/sshd support,
so it makes more sense to enable it.
please disable them if there's any issues, but in that case, in-tree
ssh/sshd won't work.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Moving to a default of 64 PTYs.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

branches: 1.68.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

Enable vnd.

branches: 1.66.2;
add stf pseudo interface (commented out due to possible security risks)

Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.

Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.

Add commented out "ident"-command

Add overlay to kernel configs.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

branches: 1.59.2; 1.59.8;
It's time to be COMPAT_14.

enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!

Add COMPAT_SVR4 for m68k.

branches: 1.56.2; 1.56.4;
Added options COMPAT_LINUX and EXEC_ELF32 as comments
to GENERIC configuration files.

Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Added a (commented out) configuration line for the RAIDframe device driver.

remove options FIFO; it's now the default

turn on LKM by default, per PR#4423

Add commented out "options FFS_EI"

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x
Configure P4 frame buffers at the address of their P4 reg.
Move messy Sun3 bw2 and cg4 configs to included files.

Merge arch/sun3x into arch/sun3

Add NFS_BOOT_BOOTPARAM (fixes PR#4904)

branches: 1.47.2;
Remove the config flags from "si" lines so the driver default will
be used. That also makes it possible to patch the kernel in case
the default option causes boot failures or something...

Move Sun3/E stuff

Add COMPAT_13.

add pseudo-device rnd, commented out

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

branches: 1.42.2;
typo

Add Sun3/E stuff, and re-organize.

add a before tab to SCSIVERBOSE

add commented out reference SCSIVERBOSE option

branches: 1.38.4;
clean up whitespace use

Update the description of the flags for "si" devices.
Remove wired-down scsi disk targets (no longer needed).
Add ch, ss, uk (scsi devcies) at mycroft's requst.

update comments

branches: 1.35.2;
Adopt for new file system and root spec grammar.

branches: 1.34.2;
add 'pseudo-device ccd' where necessary; PR kern/1830.

rename: ramdisk => md

Move SWAPPAGER, VNODEPAGER, DEVPAGER to std.sun3

Use explicit addresses for obio devices.

Merge netbsd-1-2 branch back into mainline.

Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes

add COMPAT_12.

branches: 1.27.4;
New autoconfig design that controls attach order.

kill SCSIDEBUG

Switch to ncr_si (will just do PIO for now) and cleanup

branches: 1.24.2;
Add RAMDISK, move some things around.
Add rd*, xd*, xy* (only rd is done).

Set TIMEZONE=0, DST=0 (which is correct for the hardware clock).

Put back SYMTAB_SPACE so the distributed kernels will have symbols when
loaded by the SunOS boot program. Our netboot works, but our ufsboot
still has a problem on the 3/260, so keep SunOS boot support for now.

Retool for native build.

Yet more SYMTAB_SPACE

Add FDESC FIFO NULLFS UNION file systems.

Nuke FPCOPROC

Add more stuff! (/kern /proc bpf, ppp, sp, ...)

Add bwtwo, cgfour, fb

Add option FPU_EMULATE

Make scsi device mappings Sun compatible.

Move FPCOPROC out of std.sun3

Enable the ie and si drivers on VME.

Add the 110, 160, 260 now that ie and zs both work.

New autoconfig interface to support VME, etc.

Lots of changes. Fairly stable now.

new RCS ID format.

branches: 1.7.2;
GENERIC kernel works.

Goodbye to MAXFDESCS

Oops - had some options in twice.

Add zs driver, organize like TIMESINK

boots, presents shell prompt, and doesn't crash immediately

snapshot. starts nfsmountroot but doesn't seem to emit any packets

it links with out any unresolved symbols, last few are just stubs
because we aren't likely to get near execing init for a while

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

branches: 1.2.2; 1.2.8;
Add examples for including the kernel crypto bits from either crypto-us
or crypto-intl, commented out, with instructions to use only one, and
adjust the prefix as necessary.

branches: 1.1.2;
kernel configuration for IPv6/IPsec. should be in GENERIC in the future.
(source code will be committed soon)

Add bwtwo0 config on P4 cgfour overlay plane on 3/80, as 3/60 in bw2.sun3.

Note the ancient Xsun server supports multiple framebuffers with both
cgfour (at DISPLAY :0) and overlay bwtwo (at DISPLAY :0.1).

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.138.2;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Add -fno-omit-frame-pointer to m68k kernels with DDB for backtraces.
-omit-frame-pointer is enabled for -O1 and higher for GCC8 by default.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Use "-fno-unwind-tables" to shrink binaries more.

sun3 GENERIC -Os
text data bss dec hex filename
1762862 75292 93032 1931186 1d77b2 netbsd

sun3 GENERIC -Os -fno-unwind-tables
text data bss dec hex filename
1545726 75292 93032 1714050 1a2782 netbsd

GENERIC is tested on TME.

branches: 1.134.2;
Use veriexec.config to reduce duplication

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.131.2;
also disable SYSCTL_INCLUDE_DESCR.
copy sun3 disables to sun3x mostly. it has the same ufsboot 2MB limit.

branches: 1.130.2;
Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove TCP_COMPAT_42 from the config files. Pass 1.

branches: 1.126.10;
Remove KMEMSTATS.

branches: 1.125.2;
Create an "options MODULAR_DEFAULT_AUTOLOAD" config option and add
it to all kernel configs that contain "options MODULAR". This
option turns on module autoloading by default (which is the current
default). This allows people who don't want module autoloading on
by default to disable it by simply removing/commentting this line.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.122.6;
G/C PFIL_HOOKS from the kernel configs.

branches: 1.121.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.115.2;
P1003_1B_SEMAPHORE is no longer optional.

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.113.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.112.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.110.2; 1.110.4;
Xref module(7) in comments.

Remove unused count from pseudo-device md.

Add commented out options MODULAR.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.105.4; 1.105.6;
Add options COMPAT_50.

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.102.2;
Add accept filters to sync with GENERIC.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.100.4; 1.100.6; 1.100.10;
Always specify COPTS="-Os" and disable several options and devices
to shrink kernels. Current sun68k bootloader can't load a kernel larger
than ~2MB, and our ever growing kernel have been reached the limit.

branches: 1.99.6;
Remove systrace. Ok core@.

branches: 1.98.2; 1.98.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.96.4; 1.96.6; 1.96.10;
- add options COMPAT_40
- use options<space><tab>

branches: 1.95.2; 1.95.4;
Add pseudo-device agr to more kernels

branches: 1.94.2; 1.94.8; 1.94.10; 1.94.16; 1.94.18;
Remove tmpfs's experimental status. OK'ed by core@.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

branches: 1.92.2; 1.92.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.89.2;
Sync with GENERIC:
> Add CARP to GENERIC kernel configs. CARP is not enabled by default.

branches: 1.88.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.87.2; 1.87.4; 1.87.6;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.85.2;
Sync with GENERIC:
> Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.84.2; 1.84.4;
Sync with GENERIC:
> Add (commented out) Veriexec options and pseudo-device to GENERIC kernels

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Sync with GENERIC:
- add indent
- add commented out file-system TMPFS
- enable PFIL_HOOLS
- space cosmetics

typo in comment. (since 1994?!)

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

Add (commented out) IPSEC_NAT_T option.

branches: 1.74.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.72.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Enable disconnect/reselect for esp(4) on 3/80 by default.

It also implies to enable tagged queueing, which works fine on my 3/80:
---
NetBSD 2.99.15 (CHARIOT) #184: Sun Jan 30 07:13:08 JST 2005
tsutsui@mirage:/usr/src/sys/arch/sun3/compile/CHARIOT
Model: sun3x 80
fpu: mc68882
total memory = 65536 KB
avail memory = 62496 KB
mainbus0 (root)
obio0 at mainbus0
:
dma0 at obio0 addr 0x66001000 ipl 2: rev 0
esp0 at obio0 addr 0x66000000 ipl 2: ESP100, 20MHz, SCSI ID 7
scsibus0 at esp0: 8 targets, 8 luns per target
:
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST31230N, HP04> disk fixed
sd0: 1001 MB, 3992 cyl, 5 head, 102 sec, 512 bytes/sect x 2051460 sectors
sd0: async, 8-bit transfers, tagged queueing
sd1 at scsibus0 target 3 lun 0: <FUJITSU, M1606S-512, 6237> disk fixed
sd1: 1041 MB, 3457 cyl, 6 head, 102 sec, 512 bytes/sect x 2131992 sectors
sd1: async, 8-bit transfers, tagged queueing
boot device: sd0a
:
---
(yes, async but tagged queueing :-)

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.67.2;
Remove options COMPAT_15 and add options COMPAT_20.

Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.65.4;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

branches: 1.58.2;
add COMPAT_15/COMPAT_16

branches: 1.57.2;
Sync with GENERIC:
- add #options BRIDGE_IPF
- add pseudo-device ksyms

Bye Bye UCONSOLE

Fix typo (responsiness -> responsiveness).

Add (commented out) options NEW_BUFQ_STRATEGY and pseudo-device cgd.
(sync with GENERIC)

Sync with GENERIC:
- Add options SYSTRACE
- Add (commented out) options for semaphores

enable USERCONF by default; it's small and extremely useful to have available.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.50.2; 1.50.4;
Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.42.6;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.40.2;
Standardise TCP_COMPAT_42 as commented out, grouped with other COMPAT options,
and with the comment '4.2BSD TCP/IP bug compat. Not recommended'
Add commented out 'TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG'
(All hail amiga and atari which make some attempt to automate the
multiplicity of config files...)

Fix various misspellings of compatible/compatibility.

branches: 1.38.2;
switch sun3 to ELF. highlight include:
add "%" prefix to register names in assembly code.
change assembly functions to return values in %a0 instead of %d0.
C symbols no longer prepend an underscore, adjust assembly code for this.
32-bit values are now 32-bit aligned instead of 16-bit aligned,
adjust structure packing and padding to override this where necessary.
make EXEC_ELF std, make EXEC_AOUT and COMPAT_AOUT_M68K optional.
use the MI loadfile() instead of several home-grown versions.

Remove "rnd is EXPERIMENTAL" comments.

Add pseudo-device vlan.

Enable options SOFTDEP.

enable rnd(4)

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

branches: 1.32.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

Add (commented out) stf. (sync with GENERIC)

Enable vnd.

branches: 1.29.2;
Add OVERLAY and RAID_AUTOCONFIG. (sync with GENERIC)

Add IPv6 stuff.

Add commented out option SOFTDEP to all GENERIC kernels.

branches: 1.26.2; 1.26.8;
It's time to be COMPAT_14.

Add COMPAT_SVR4 for m68k.

branches: 1.24.2; 1.24.4;
Make "dma" a real device so it can attach before esp.

Sync with GENERIC

remove options FIFO; it's now the default

turn on LKM by default, per PR#4423

Add commented out "options FFS_EI"

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x
Configure P4 frame buffers at the address of their P4 reg.
Move messy Sun3 bw2 and cg4 configs to included files.

Merge arch/sun3x into arch/sun3

branches: 1.17.4;
Remove the config flags from "si" lines so the driver default will
be used. That also makes it possible to patch the kernel in case
the default option causes boot failures or something...

Add COMPAT_13.

add pseudo-device rnd, commented out

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

branches: 1.13.2;
Add COMPAT_1?

Add VME support

cosmetic

Add the ie driver (and reorder some things)

add a before tab to SCSIVERBOSE

add commented out reference SCSIVERBOSE option

branches: 1.7.4;
cleanup use of whitespace

Document the flags accepted by the esp driver.

Add floppy controller and floppy drive. Also add MS-DOS filesystem for
use with floppies. Remove 'SYMTAB_SPACE' now that we have our own
bootloader.

No longer need SYMTAB_SPACE now that sun3x/stand/* works.
(Thanks, Jeremy!)

Fixed address for bwtwo framebuffer.

New ARP system, supports IPv4 over any hardware link.

Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.

For the detailed change history, look at the commit log entries for
the is-newarp branch.

branches: 1.1.2;
The first GENERIC config for sun3x. Includes new esp driver.

Merge arch/sun3x into arch/sun3

branches: 1.15.2;
Remove the config flags from "si" lines so the driver default will
be used. That also makes it possible to patch the kernel in case
the default option causes boot failures or something...

Sync with GENERIC

Add COMPAT_13.

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

branches: 1.11.8;
clean up whitespace use

Sync up with changes in GENERIC

Actually works now.

branches: 1.8.2;
Adopt for new file system and root spec grammar.

branches: 1.7.2;
add 'pseudo-device ccd' where necessary; PR kern/1830.

rename: ramdisk => md

Move SWAPPAGER, VNODEPAGER, DEVPAGER to std.sun3

Merge netbsd-1-2 branch back into mainline.

Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes

add COMPAT_12.

branches: 1.1.2;
Add KGDB support

add a commented out compat_ossaudio wherever there's compat_linux

requested by mrg

branches: 1.62.2;
Use "-fno-unwind-tables" to shrink binaries more.

sun3 GENERIC -Os
text data bss dec hex filename
1762862 75292 93032 1931186 1d77b2 netbsd

sun3 GENERIC -Os -fno-unwind-tables
text data bss dec hex filename
1545726 75292 93032 1714050 1a2782 netbsd

GENERIC is tested on TME.

branches: 1.61.4;
Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.60.2; 1.60.4;
clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove TCP_COMPAT_42 from the config files. Pass 1.

Remove the KMEMSTATS option. It no longer exists.

branches: 1.57.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

G/C PFIL_HOOKS from the kernel configs.

branches: 1.54.4;
remove confusing numeric locators where they are unused.

Retire OSI network stack. OK core@

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.51.6;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.50.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.49.2;
dependant -> dependent

merge the bouyer-quota2 branch. This adds a new on-disk format
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.

See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.

branches: 1.47.2; 1.47.4;
Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.45.2; 1.45.4;
Remove SHMMAXPGS from all kernel configs. Dynamically compute the
initial limit as 1/4 of the physical memory. Ensure the limit is at
least 1024 pages, the old default on most platforms.

branches: 1.44.2;
Add options COMPAT_50.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.