add cardbus attachment for malo(4), from OpenBSD

branches: 1.38.34; 1.38.36;
patches for new wifi devices.

branches: 1.37.2;
PR/46310: Ryo ONODERA: Add support for cardbus bwi(4)

branches: 1.36.8; 1.36.12;
Added sdhc at cardbus support.

branches: 1.35.2; 1.35.4;
Support siisata@cardbus.
It tested on amd64 and i386 only.

branches: 1.34.56; 1.34.72;
Workbit NinjaATA-32 busmastering PIO IDE controller driver (njata)

This driver supports NinjaATA-32Bi and NPATA-32 chips,
which are used for CardBus ATA interface cards and
CardBus CompactFlash adapters.

Attachment framework for the rt2561.c and rt2661.c drivers.

From OpenBSD.

branches: 1.32.4; 1.32.6; 1.32.8; 1.32.14;
merge ktrace-lwp.

finally nuke the useless cardbus "dev" locator

branches: 1.30.2;
Add file for 'uhci at cardbus'. From FUKAUMI Naoki in kern/30814.

branches: 1.29.2;
add autoconf glue for the ralink wireless drivers, basically from
PR kern/30449, but changed so that pci/cardbus and usb devices
are all called "ral" to the user, so that code can be shared eventually

Make the Adaptec 1480 cardbus Slim SCSI card work.
From a person wishing to remain anonymous.

Remove duplicate stanza for re(4) at cardbus. When I added an entry
here and enabled it in i386 GENERIC_LAPTOP, I missed that yamt@ had
already added an entry here.

Now that we've switched to the split re(4) for PCI, add the cardbus
frontend for the split re(4) to files.cardbus, and to the generic x86
laptop config (sys/i386/conf/GENERIC_LAPTOP).

NB: as best I know, there are still unresolved issues in attach and
powersave, with the NetGear cardbus cards and re(4).

branches: 1.25.2;
- switch to dev/rtl8169.c from pci/if_re.c.
- enable re@cardbus.
both of re@pci and re@cardbus seem to work for me.

branches: 1.24.4;
Add rtw(4).

Workbit NinjaSCSI-32 PCI/CardBus SCSI driver (njs)

branches: 1.22.2;
RealTek -> Realtek.

add support ath on cardbus
- implement power management

Add driver atw for PCI/Mini-PCI/Cardbus 802.11b NICs based on the
ADMtek ADM8211. Read the man page for bugs and other outstanding
issues.

branches: 1.19.2;
make a kernel with the combination ohci@cardbus + ehci@pci link

branches: 1.18.10;
- convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups

ehci can attach to cardbus too.

branches: 1.16.2; 1.16.6;
cardbus attachment for PCI-PCI bridges

Add FireWire OHCI controller on Cardbus.

Config glue for the CardBus front-end for the Advansys SCSI driver.
kern/12431, takashi.yamamoto@bigfoot.com.

branches: 1.13.2;
whitespace police

Move if_rl_cardbus.c:1.8 to if_rtk_cardbus.c.

Changes the name of RealTek driver. The new name is `rtk'. This used
to be called `rl' and it conflict with RL vax disks, canonical and
historical unix driver name.

This changes are minimal: it only changes the name of RealTek driver.
The filename of source code and a lot of the letter `rl' in source
files should be changed shortly.

enable com at cardbus

Incorporate the changes of RL81x9 driver provided by M. Kanaoka
<kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific
portion and bus attachment portion and added cardbus attachent.

First attempt at a CardBus front-end for the `ahc' driver. This will
support the Adaptec ADP-1480 CardBus SCSI cards, which are a stright
AIC-7860 implementation.

branches: 1.7.2;
Add a basic CardBus front-end for the `tlp' driver. Still more work to do.

uncomment fxp_cardbus

add cardbus_exrom.c to cardbus device

Use opt_cardbus.h for cardbus.c and opt_cardslot.h for cardslot.c.
Remove unnecessary include from cardbus.c.

branches: 1.3.2; 1.3.4;
Add USB OHCI attachment to cardbus.
XXX There seems to be some interrupt problem.

add NetBSD ID tag.

This is the first check-in of CardBus driver. CardBus driver contains
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.

TODO:
o Conform to the KNF more strictly.
o Be unified with pcmcia code as much as possible.
o Add more drivers for CardBus card, such as APA-1480 or USB card.

The affected files are listed below.

sys/arch/i386/conf/files.i386
sys/arch/macppc/conf/files.macppc
sys/conf/files
sys/dev/ic/elinkxl.c
sys/dev/ic/elinkxlvar.h
sys/dev/ic/i82365.c
sys/dev/ic/i82365var.h
sys/dev/isa/i82365_isasubr.c
sys/dev/pci/files.pci
sys/dev/pcmcia/pcmcia.c
sys/dev/pcmcia/pcmciachip.h

The added files are listed below.

sys/arch/i386/conf/CARDBUS
sys/arch/i386/include/rbus_machdep.h
sys/arch/i386/i386/rbus_machdep.c
sys/arch/macppc/include/rbus_machdep.h
sys/arch/macppc/macppc/rbus_machdep.c
sys/dev/cardbus/if_ex_cardbus.c
sys/dev/cardbus/Makefile.cardbusdevs
sys/dev/cardbus/cardbus.c
sys/dev/cardbus/cardbus_map.c
sys/dev/cardbus/cardbusdevs
sys/dev/cardbus/cardbusdevs.h
sys/dev/cardbus/cardbusdevs_data.h
sys/dev/cardbus/cardbusvar.h
sys/dev/cardbus/cardslot.c
sys/dev/cardbus/cardslotvar.h
sys/dev/cardbus/devlist2h.awk
sys/dev/cardbus/files.cardbus
sys/dev/cardbus/if_fxp_cardbus.c
sys/dev/cardbus/pccardcis.h
sys/dev/cardbus/rbus.c
sys/dev/cardbus/rbus.h
sys/dev/pci/pccbb.c
sys/dev/pci/pccbbreg.h
sys/dev/pci/pccbbvar.h