| History log of /src/sys/dev/fdt/files.fdt |
| Revision | | Date | Author | Comments |
| 1.76 |
| 06-Sep-2025 |
thorpej | Re-factor the console-related code into fdt_console.[ch]
|
| 1.75 |
| 06-Sep-2025 |
thorpej | Refactor the "platform" defitions into fdt_platform.h
|
| 1.74 |
| 06-Sep-2025 |
thorpej | Step towards modularizing the Flattened Device Tree code.
Define attributes for each of the specific device bindings: clock,
dai, dma, gpio, i2c, iommu, mbox, mmc_pwrseq, phy, power, power domain,
pwm, regulator, reset controller, spi, system controller, pin
controller. Include these support files only if either a provider
or consumer with one of these attributes is present in the kernel
config.
Add the necessary attributes to the device / attach declarations for
each provider and consumer.
There are some bindings that are consumed by generic code (iommu, pinctrl,
power, power domain). Provide weak stubs for these routines to handle
situations where there is no provider.
No actual code changed; NFCI.
|
| 1.73 |
| 09-May-2024 |
pho | branches: 1.73.4;
port-arm/58194: Resurrect vmt(4) from bitrot
On this architecture vmt(4) used to search for a node "/hypervisor" in the
FDT and probed the VMware hypervisor call only when the node was
found. However, things appear to have changed and VMware no longer provides
the FDT node.
Since vmt(4) doesn't actually need to read anything from FDT, and the
hypervisor call logically resides in virtual CPUs themselves, it would be
better to attach it directly to cpu, just like how it's probed on x86.
|
| 1.72 |
| 18-Jan-2024 |
skrll | risc-v: attach the Cadence XHCI usb controller on the JH7100 SoC
|
| 1.71 |
| 29-Dec-2023 |
thorpej | Re-factor the Goldfish RTC driver into attach-front-end and generic
back-end; Goldfish virtual devices can be found on virtual platforms
that don't use FDT.
|
| 1.70 |
| 08-May-2023 |
skrll | Google goldfish config goop
|
| 1.69 |
| 22-Apr-2023 |
skrll | Move fdt_update_stdout_path from evbarm code to MI code
|
| 1.68 |
| 16-Apr-2023 |
jmcneill | Separate DesignWare watchdog driver and FDT glue.
|
| 1.67 |
| 07-Apr-2023 |
skrll | Rename ARM_PLATFORM to FDT_PLATFORM and make it available outside arm.
|
| 1.66 |
| 05-Nov-2022 |
jmcneill | Add driver for Cadence I2C controller.
|
| 1.65 |
| 20-Jul-2022 |
riastradh | drm: Use CPPFLAGS.drmkms in all local drm drivers too.
This way we don't pollute the NetBSD kernel namespace with all the
Linux compat shim definitions needed to build drm, except for the
local drm drivers that need the API.
|
| 1.64 |
| 25-Mar-2022 |
jmcneill | fdt: add support for USERCONF option
|
| 1.63 |
| 04-Mar-2022 |
skrll | Add mailbox and power-domain support.
power-domain support is very rudimentary.
|
| 1.62 |
| 04-Sep-2021 |
jmcneill | Add facility for registering iommus.
|
| 1.61 |
| 26-Apr-2021 |
thorpej | branches: 1.61.10;
simplebus, cpus, and syscon do not need their own interface attribute; they
use the "fdt" interface attribute to attach children.
|
| 1.60 |
| 31-Dec-2020 |
ryo | branches: 1.60.4;
add fdt pwm regulator
|
| 1.59 |
| 28-Dec-2020 |
thorpej | Re-factor the "iicmux" driver to support other types of muxes that are
themselves i2c devices.
|
| 1.58 |
| 23-Dec-2020 |
thorpej | Add support for i2c-mux-gpio and i2c-mux-pinctrl I2C mux virtual
controllers.
|
| 1.57 |
| 12-Dec-2020 |
skrll | Move evbarm/fdt/fdt_memory.[ch] to sys/dev/fdt and simplify the api and
some operations. This allows other architectures to use it.
|
| 1.56 |
| 30-Oct-2020 |
skrll | branches: 1.56.2;
Add a "show fdt" ddb command
|
| 1.55 |
| 27-Oct-2020 |
ryo | move vmt(4) from MD to MI, and add support vmt on aarch64. tested on ESXi-Arm Fling
- move from sys/arch/x86/x86/{vmt.c,vmtreg.h,vmtvar.h} to sys/dev/vmt/{vmt_subr.c,vmtreg.h,vmtvar.h},
and split the attach part of the cpufeaturebus and fdt
- add aarch64 vmware backdoor op
- add include guard to vmt{reg,var}.h
- Yet there is still some little-endian dependency. it needs to be fixed in order to work properly on aarch64eb
|
| 1.54 |
| 16-Jul-2020 |
jmcneill | Add kernel option FDT_DEFAULT_STDOUT_PATH to set default (fallback)
stdout-path
|
| 1.53 |
| 16-Jul-2020 |
jmcneill | Add glue for 8250 compatible UARTs.
|
| 1.52 |
| 24-Mar-2020 |
tnn | ohci@fdt, ehci@fdt are machine independent; move from sunxi to sys/dev/fdt
|
| 1.51 |
| 22-Feb-2020 |
jmcneill | Add support for Broadcom GENET v5 ethernet controller as found on the
Raspberry Pi 4 (BCM2711).
|
| 1.50 |
| 02-Jan-2020 |
jmcneill | branches: 1.50.2;
Add driver for simple-audio-amplifier binding
|
| 1.49 |
| 19-Dec-2019 |
jakllsch | Add another panel@fdt driver, this time for DRM-style panels.
To do: migrate away from other panel driver.
|
| 1.48 |
| 17-Nov-2019 |
jmcneill | Add driver for dummy spdif transmitter bindings.
|
| 1.47 |
| 30-Oct-2019 |
jmcneill | Add generic USB PHY driver
|
| 1.46 |
| 27-Oct-2019 |
jmcneill | Add driver for one-register-per-pin type pinctrl devices.
|
| 1.45 |
| 13-Aug-2019 |
tnn | fdt: add SPI controller frontend
|
| 1.44 |
| 13-Mar-2019 |
jmcneill | branches: 1.44.4;
Add support for Arasan SDHCI 5.1
|
| 1.43 |
| 03-Mar-2019 |
jmcneill | Add eMMC reset sequence provider
|
| 1.42 |
| 30-Jan-2019 |
jmcneill | Add support for Allwinner A64's display pipeline.
|
| 1.41 |
| 19-Oct-2018 |
jakllsch | Add amdccp(4) driver for AMD Cryptographic Coprocessor, as found on the
A11xx Opterons. Driver currently provides RNG service only.
|
| 1.40 |
| 15-Oct-2018 |
jmcneill | Rename pl061gpio to plgpio and split the device logic from the FDT glue.
|
| 1.39 |
| 06-Oct-2018 |
skrll | Provide an FDTBASE option which allows kernels to access FDT parsing
functions without requiring full blown FDTisation.
This will be used by ODROID-C1 in move to generic start code.
|
| 1.38 |
| 26-Sep-2018 |
jakllsch | Add dwiic_fdt attachment for "snps,designware-i2c".
|
| 1.37 |
| 03-Sep-2018 |
jmcneill | Add generic AHCI SATA controller bus glue
|
| 1.36 |
| 04-Jul-2018 |
jmcneill | Add basic pwm-fan driver. This doesn't have any smarts yet other than
turning the fan on at 100% duty cycle.
|
| 1.35 |
| 30-Jun-2018 |
jmcneill | Allow nodes to attach child devices using the same sorting rules as used
by the simplebus driver.
|
| 1.34 |
| 30-Jun-2018 |
jmcneill | Add support for system controller nodes.
|
| 1.33 |
| 30-Jun-2018 |
jmcneill | Add driver for DesignWare Watchdog Timer. Untested as I can't seem to find
the parent clock for this in the RK3328 documentation.
|
| 1.32 |
| 16-Jun-2018 |
jmcneill | branches: 1.32.2;
Add initial support for Rockchip RK3328 SoC.
|
| 1.31 |
| 15-Jun-2018 |
jakllsch | Add basic ARM PL061 GPIO driver with FDT attachment.
Mostly for Qemu 'virt' platform; really needs interrupt support
in gpiokeys(4) and this driver to work efficently and reliably.
|
| 1.30 |
| 15-Jun-2018 |
jakllsch | add FDT "qemu,fw-cfg-mmio" glue for qemufwcfg
|
| 1.29 |
| 06-Jun-2018 |
jakllsch | Add Virtio MMIO transport.
Adapted in part from OpenBSD.
|
| 1.28 |
| 01-Jun-2018 |
jmcneill | Move simplefb declaration to files.fdt
|
| 1.27 |
| 27-May-2018 |
jmcneill | Rename sunxi_com to dw_apb_uart and move it to dev/fdt since it is not
sunxi-specific.
|
| 1.26 |
| 09-May-2018 |
jmcneill | Add SoC sound driver based on "simple-audio-card" DT binding spec.
|
| 1.25 |
| 06-May-2018 |
jmcneill | Add support for PWM backlights.
|
| 1.24 |
| 01-May-2018 |
jmcneill | Add DesignWare DWC3 XHCI driver.
|
| 1.23 |
| 03-Apr-2018 |
bouyer | Add connector and panel drivers (panel supports only panel-lvds and
panel-dual-lvds at this time, but can easily be extended to other types
of panels).
Add an API for ports/endpoints.
Proposed on tech-kern@ a few days ago, ok jmcneill@
|
| 1.22 |
| 22-Oct-2017 |
jmcneill | branches: 1.22.2; 1.22.4;
Add support for simple MMC power sequence provider bindings.
|
| 1.21 |
| 23-Sep-2017 |
jmcneill | For known Linux keycodes, report key press events through a wskbd device
instead of using sysmon pswitch hotkey events.
|
| 1.20 |
| 13-Aug-2017 |
jmcneill | Add GPIO regulator driver.
|
| 1.19 |
| 08-Jul-2017 |
jmcneill | Add driver for fixed-factor clocks.
|
| 1.18 |
| 08-Jul-2017 |
jmcneill | Add GPIO LED driver.
|
| 1.17 |
| 29-Jun-2017 |
jmcneill | Add FDT PHY interface.
|
| 1.16 |
| 03-Jun-2017 |
jmcneill | branches: 1.16.2;
Add helper for parsing display timings.
|
| 1.15 |
| 02-Jun-2017 |
jmcneill | gpiokeys depends on sysmon_envsys and sysmon_power
|
| 1.14 |
| 28-May-2017 |
jmcneill | Add facility for fdt devices to register reset and poweroff handlers.
Use this to remove as3722-specific code in tegra_machdep.c
|
| 1.13 |
| 28-May-2017 |
jmcneill | Add CPUs ("/cpus" node) driver. CPUs is a container of cpu nodes.
|
| 1.12 |
| 29-Apr-2017 |
jmcneill | Add FDT DMA controller API.
|
| 1.11 |
| 26-Apr-2017 |
jmcneill | branches: 1.11.2;
Allow for specifying (optional) pass number locator for devices at fdt.
|
| 1.10 |
| 22-Apr-2017 |
jmcneill | Add fdtbus_todr_attach.
The kernel will only ever use the first RTC driver to call todr_attach.
When drivers use fdtbus_todr_attach, if an "rtc0" alias exists in the
devicetree, ensure that only that device node calls todr_attach.
|
| 1.9 |
| 16-Apr-2017 |
jmcneill | Add support for simple fixed-rate clock source bindings.
|
| 1.8 |
| 14-Apr-2017 |
jmcneill | Remove simplebus driver and allow fdtbus to attach directly to itself.
|
| 1.7 |
| 30-Dec-2015 |
marty | branches: 1.7.2; 1.7.4;
FDT pinctrl
Add a pinctrl bus to FDT. This works against exynos, but someone(tm) needs
to think about whether it is general enough or too specific to exynos.
|
| 1.6 |
| 23-Dec-2015 |
jmcneill | branches: 1.6.2;
fdtbus depends on clk
|
| 1.5 |
| 22-Dec-2015 |
jmcneill | Add support for fdt clock and reset controllers.
|
| 1.4 |
| 16-Dec-2015 |
jmcneill | fix FDT build without openfirm pseudo-device
|
| 1.3 |
| 16-Dec-2015 |
jmcneill | split gpio, i2c, intr, and regulator helpers into separate files
|
| 1.2 |
| 14-Dec-2015 |
jmcneill | Add driver for device tree "gpio-keys" device. Each GPIO key is mapped to
a sysmon pswitch; code KEY_POWER is a power button, KEY_SLEEP is a sleep
button, and everything else is treated as a hotkey button.
|
| 1.1 |
| 13-Dec-2015 |
jmcneill | Add a framework for enumerating devices using a Flattened Device Tree (FDT).
|
| 1.6.2.4 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
| 1.6.2.3 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.6.2.2 |
| 27-Dec-2015 |
skrll | Sync with HEAD (as of 26th Dec)
|
| 1.6.2.1 |
| 23-Dec-2015 |
skrll | file files.fdt was added on branch nick-nhusb on 2015-12-27 12:09:49 +0000
|
| 1.7.4.1 |
| 21-Apr-2017 |
bouyer | Sync with HEAD
|
| 1.7.2.1 |
| 26-Apr-2017 |
pgoyette | Sync with HEAD
|
| 1.11.2.1 |
| 02-May-2017 |
pgoyette | Sync with HEAD - tag prg-localcount2-base1
|
| 1.16.2.1 |
| 18-Jul-2017 |
snj | Pull up following revision(s) (requested by jmcneill in ticket #114):
sys/arch/arm/samsung/exynos_intr.h: revision 1.3
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1
distrib/utils/embedded/mkimage: revision 1.66
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7
sys/dev/gpio/gpio.c: revision 1.59
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1
sys/conf/Makefile.kern.inc: revision 1.257
sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2
sys/conf/Makefile.kern.inc: revision 1.258
sys/arch/arm/fdt/psci_fdt.h: revision 1.1
sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1
sys/arch/evbarm/conf/files.sunxi: revision 1.1
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9
sys/arch/arm/samsung/files.exynos: revision 1.22
distrib/utils/embedded/conf/armv7.conf: revision 1.13
sys/arch/arm/samsung/files.exynos: revision 1.23
sys/arch/evbarm/conf/std.tegra: revision 1.15
distrib/utils/embedded/conf/armv7.conf: revision 1.14
sys/arch/arm/samsung/files.exynos: revision 1.24
distrib/utils/embedded/conf/armv7.conf: revision 1.15
sys/arch/evbarm/sunxi/genassym.cf: revision 1.1
sys/arch/arm/samsung/exynos_fdt.c: file removal
sys/dev/fdt/fdt_pinctrl.c: revision 1.4
sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1
sys/dev/usb/ehci.c: revision 1.255
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1
sys/dev/ic/dwc_mmc.c: revision 1.11
sys/arch/arm/cortex/gic.c: revision 1.24
distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17
etc/etc.evbarm/Makefile.inc: revision 1.87
etc/etc.evbarm/Makefile.inc: revision 1.88
sys/arch/arm/fdt/gic_fdt.c: revision 1.5
etc/Makefile: revision 1.429
sys/arch/arm/fdt/gic_fdt.c: revision 1.6
sys/arch/arm/fdt/gic_fdt.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2
sys/arch/evbarm/conf/std.sunxi: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3
sys/arch/evbarm/conf/std.sunxi: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4
sys/arch/evbarm/conf/std.sunxi: revision 1.3
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1
sys/dev/gpio/gpiovar.h: revision 1.17
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8
sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.12
sys/dev/fdt/fdtvar.h: revision 1.21
sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.13
sys/dev/fdt/fdtvar.h: revision 1.22
sys/arch/evbarm/conf/SUNXI: revision 1.10
sys/dev/fdt/fdtvar.h: revision 1.23
sys/arch/evbarm/conf/SUNXI: revision 1.11
sys/dev/fdt/gpioleds.c: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.24
sys/arch/evbarm/conf/SUNXI: revision 1.12
sys/arch/evbarm/conf/SUNXI: revision 1.13
sys/arch/arm/cortex/gic.c: revision 1.30
sys/arch/evbarm/conf/SUNXI: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.16
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1
etc/Makefile: revision 1.430
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2
etc/Makefile: revision 1.431
sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4
sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6
sys/arch/arm/samsung/exynos_platform.c: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.29
sys/arch/arm/samsung/exynos_platform.c: revision 1.2
sys/arch/evbarm/conf/mk.vexpress: revision 1.3
sys/arch/arm/samsung/exynos_platform.c: revision 1.3
sys/arch/evbarm/conf/mk.vexpress: revision 1.4
sys/arch/arm/samsung/exynos_platform.c: revision 1.4
sys/arch/arm/arm/psci.h: revision 1.1
sys/arch/arm/samsung/exynos_platform.c: revision 1.5
sys/arch/arm/samsung/exynos_platform.c: revision 1.6
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10
external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12
sys/dev/fdt/files.fdt: revision 1.17
sys/dev/fdt/files.fdt: revision 1.18
sys/dev/fdt/files.fdt: revision 1.19
sys/arch/arm/samsung/exynos_sscom.c: revision 1.8
sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1
sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1
sys/arch/arm/samsung/exynos_sscom.c: revision 1.9
sys/arch/arm/conf/files.arm: revision 1.133
sys/arch/arm/samsung/mct_var.h: revision 1.5
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2
sys/arch/evbarm/conf/std.vexpress: revision 1.6
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.30
sys/arch/arm/sunxi/files.sunxi: revision 1.2
sys/dev/ofw/openfirm.h: revision 1.35
sys/arch/arm/sunxi/files.sunxi: revision 1.3
sys/dev/ofw/openfirm.h: revision 1.36
sys/arch/arm/sunxi/files.sunxi: revision 1.4
sys/arch/arm/sunxi/files.sunxi: revision 1.5
sys/arch/evbarm/exynos/exynos_machdep.c: file removal
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1
sys/arch/arm/samsung/sscom.c: revision 1.9
sys/arch/arm/sunxi/files.sunxi: revision 1.6
sys/dev/fdt/ohci_fdt.c: revision 1.1
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.7
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.8
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.9
sys/arch/arm/samsung/exynos_sscom.c: revision 1.10
sys/arch/evbarm/conf/mk.tegra: revision 1.5
sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4
sys/arch/evbarm/conf/mk.tegra: revision 1.6
sys/arch/evbarm/conf/EXYNOS: revision 1.15
sys/arch/evbarm/conf/EXYNOS: revision 1.16
sys/arch/evbarm/conf/EXYNOS: revision 1.17
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.19
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5
sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1
sys/arch/evbarm/conf/mk.sunxi: revision 1.1
sys/arch/evbarm/include/bootconfig.h: revision 1.7
sys/arch/evbarm/conf/TEGRA: revision 1.24
sys/arch/arm/arm/psci.c: revision 1.1
sys/dev/led.c: revision 1.1
sys/dev/led.c: revision 1.2
sys/arch/arm/arm/psci_arm.S: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2
sys/dev/fdt/ehci_fdt.c: revision 1.1
sys/dev/fdt/ehci_fdt.c: revision 1.2
sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.21
sys/arch/arm/sunxi/files.sunxi: revision 1.10
sys/arch/arm/sunxi/files.sunxi: revision 1.11
sys/dev/fdt/fdtbus.c: revision 1.14
sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1
sys/arch/arm/samsung/exynos5422_dma.c: file removal
usr.bin/config/mkmakefile.c: revision 1.69
sys/conf/files: revision 1.1178
sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1
sys/arch/evbarm/exynos/exynos_start.S: revision 1.4
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12
sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2
sys/arch/evbarm/conf/SUNXI: revision 1.1
external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.2
sys/arch/arm/fdt/psci_fdt.c: revision 1.1
sys/arch/evbarm/conf/SUNXI: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.4
sys/arch/evbarm/conf/files.exynos: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.6
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1
sys/dev/fdt/fixedfactorclock.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.7
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.8
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3
sys/dev/ic/dwc_mmc_reg.h: revision 1.6
sys/dev/fdt/fdt_subr.c: revision 1.16
sys/arch/evbarm/conf/SUNXI: revision 1.9
usr.bin/config/mkmakefile.c: revision 1.70
sys/dev/fdt/fdt_phy.c: revision 1.1
sys/arch/evbarm/conf/ODROID-XU: file removal
sys/arch/arm/fdt/arm_fdt.c: revision 1.4
sys/arch/arm/samsung/exynos_reg.h: revision 1.14
sys/conf/files: revision 1.1180
sys/arch/arm/samsung/exynos_reg.h: revision 1.15
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6
sys/dev/ic/dwc_mmc_var.h: revision 1.6
sys/arch/arm/samsung/exynos_combiner.c: revision 1.7
sys/arch/evbarm/exynos/platform.h: revision 1.2
sys/arch/arm/fdt/files.fdt: revision 1.12
sys/arch/evbarm/conf/std.exynos: revision 1.2
sys/arch/evbarm/conf/std.exynos: revision 1.3
sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6
sys/arch/arm/sunxi/sunxi_com.c: revision 1.1
sys/dev/led.h: revision 1.1
sys/arch/evbarm/conf/std.exynos: revision 1.5
sys/arch/arm/sunxi/sunxi_com.c: revision 1.2
sys/arch/evbarm/conf/files.evbarm: revision 1.26
usr.bin/config/defs.h: revision 1.99
sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6
sys/arch/arm/samsung/exynos_soc.c: revision 1.32
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2
sys/arch/arm/samsung/mct.c: revision 1.11
sys/arch/evbarm/conf/ODROID-U: file removal
sys/arch/arm/samsung/mct.c: revision 1.12
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4
Get the EXYNOS kernel building again with recent FDT changes. Untested.
Use arm_fdt_cpu_hatch and add mmu entry for DTB
Fix exynos5 devmap, bootstrap, and implement early_putchar.
Calculate UART frequency based on bootloader config.
Fix KERNEL_BASE_PHYS (how did this ever work?)
Avoid divide-by-zero for unconfigured PLLs
Correctly initialize i2cbus attach args.
Add delay and enable mct timecounter.
Fix build w/o VERBOSE_INIT_ARM
Remove ODROID-U and ODROID-XU kernel configs as they no longer work.
- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local
Use fdtbus_intr_establish to hook in block interrupts instead of
intr_establish.
Simplify MCT; just enable it and then attach an ARMv7 generic timer.
Add support for building DTB files during kernel build, from christos.
build vexpress-v2p-ca15-tc1.dtb with the kernel
build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel
Allow multiline makeoptions to work by quoting the newline..
Bump for quoting makeoptions with multiple lines.
un-c99
bump required config version for multiline makeoptions feature
Set DTS makeoption in kernel config
Assign DTB files to a variable so we can make -V DTB
put the dtb files with their kernels.
no need for debug printing.
Don't assume that CPU index = GIC CPU interface number. We can determine
the current CPU interface number by reading from the read-only
GICD_ITARGETSR0 through GICD_ITARGETSR7 registers.
This gets interrupts working on Exynos 5422, where the boot processor has
GIC CPU interface #4.
use -v to get the expanded variable.
Use -v to get the expanded variables.
Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach.
Fix PLL con0 register locations and add uart clocks
Disable exyortc for now, it doesn't work.
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
Update for new dwc_mmc driver
Fix dmesg
Add Exynos 5410 clock controller driver.
Fix a few typos in clock parent names for mmc clocks.
From jmcneill@
Update for new dwc_mmc driver
Implement platform reset for exynos5
Attach fdtbus to a /clocks node with no compatible string.
Add support for ARM Power State Coordination Interface (PSCI).
Support interrupt sharing.
Add initial support for Allwinner H3 SoC.
ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF,
U-Boot on some platforms may use SGIs in this range for the PSCI
implementation.
Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert
to ensure that we don't end up with a conflict.
Add H3 MMC support
SD/MMC clock fixes
Add FDT PHY interface.
Add glue for generic ehci/ohci bindings.
Rename a variable, NFC.
Support parents in different clock domains.
Add USB stuff. Doesn't quite work yet.
Synopsys DesignWare APB UART needs "options COM_AWIN" for now.
Add i2c glue.
Add RTC driver.
PHY registers start at index 1. Now USB works.
Don't allow sharing edge and level triggered interrupts.
Add arm_fdt_memory_dump helper for dumping physical addresses from ddb
Print clocks with aprint_debug
Remove unused defines
Add fdtbus_get_string helper
Add of_search_compatible, which searches an array of compat_data structures
for a matching "compatible" entry matching the supplied OFW node. This
allows us to associate data with compatible strings.
Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and
later family SoCs.
This is a port of my FreeBSD driver which has been confirmed to work on
Allwinner H3, A83T, and A64 SoCs.
Fix dmesg
Add basic support for Allwinner A31.
Add basic FDT GPIO support.
Fix the pinctrl api to match the spec. A pinctrl config can have more
than one xref, and an xref may have specifier data associated with it.
Enable sunxi pinctrl support
Adjust to new pinctrl API
Add P2WI/RSB driver, based on awin_p2wi.c.
Fix typo in a compat string.
Configure pin defaults at attach
No need to explicitly set pinctrl config 0 now
Fix some register definitions.
Disallow sharing between MPSAFE and non-MPSAFE handlers.
Add of_match_compat_data.
This routine searches an array of compat_data structures for a
matching "compatible" entry matching the supplied OFW node.
Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP
Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.
the extent code cannot use the full range of u_long,
so ignore the last page before 4GB too. ok jmcneill@
Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
Let the controller provide a default name for pins. This makes pins easier
to locate when we have multiple banks and a variable number of pins per
bank.
Attach gpio(4) to sunxigpio
Test for kernel build directory before reading DTB list
Add support for Allwinner A83T SoC.
Add A83T files
Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints.
Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac
Restore TX_INTERVAL_DEFAULT to 64
Drop the sunxi_emac_rx_batch feature. It was originally designed to
reduce the amount of mutex unlock/lock cycles during the RX path on
FreeBSD and if_input, but it is not required to drop the lock before
calling if_percpuq_enqueue on NetBSD.
Write back the data value instead of mask in sunxi_gpio_write
Add a helper for exposing LED controls via sysctl.
Add GPIO LED driver.
add gpioleds
Add misc. gates and resets driver, and explicitly enable PIO clocks
at attach.
Add fdtbus_get_string_index helper.
Add driver for fixed-factor clocks.
Add ffclock
Remove the requirement for ehci to attach after companion devices.
"go for it" - skrll@
Remove the hack to find companion devices and just assume 1 companion if
ETTF flag is not set.
Remove pass numbers for ehci/ohci now that the attach order no longer matters
Use unsigned char for ctype functions, suggested by christos
Add : to body of populate_sunxi to appease bash.
port-evbarm/52388: Fix number of args to a debug printf.
|
| 1.22.4.8 |
| 20-Oct-2018 |
pgoyette | Sync with head
|
| 1.22.4.7 |
| 30-Sep-2018 |
pgoyette | Ssync with HEAD
|
| 1.22.4.6 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.22.4.5 |
| 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.22.4.4 |
| 25-Jun-2018 |
pgoyette | Sync with HEAD
|
| 1.22.4.3 |
| 21-May-2018 |
pgoyette | Sync with HEAD
|
| 1.22.4.2 |
| 02-May-2018 |
pgoyette | Synch with HEAD
|
| 1.22.4.1 |
| 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.22.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.22.2.1 |
| 22-Oct-2017 |
jdolecek | file files.fdt was added on branch tls-maxphys on 2017-12-03 11:37:01 +0000
|
| 1.32.2.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.32.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.44.4.3 |
| 21-Jan-2020 |
martin | Pull up following revision(s) (requested by mrg in ticket #616):
sys/dev/ic/anx_dp.c: revision 1.2
sys/arch/evbarm/conf/GENERIC64: revision 1.126
sys/dev/ic/anx_dp.h: revision 1.1
sys/arch/evbarm/conf/GENERIC64: revision 1.128
sys/dev/ic/anx_dp.h: revision 1.2
sys/dev/fdt/dwcmmc_fdt.c: revision 1.9
sys/dev/i2c/cwfg.c: revision 1.1
sys/conf/files: revision 1.1247
sys/dev/fdt/pwm_backlight.c: revision 1.5
sys/dev/fdt/pwm_backlight.c: revision 1.6
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.14
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.15
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.16
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.17
sys/dev/ic/dwc_mmc.c: revision 1.20
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.18
sys/arch/arm/rockchip/rk3399_cru.c: revision 1.19
sys/dev/usb/usbdevs: revision 1.775
sys/arch/arm/rockchip/rk_dwhdmi.c: revision 1.4
sys/dev/fdt/simple_amplifier.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.105
sys/arch/evbarm/conf/GENERIC64: revision 1.117
sys/arch/evbarm/conf/GENERIC64: revision 1.118
sys/dev/i2c/files.i2c: revision 1.107
sys/dev/fdt/files.fdt: revision 1.49
sys/arch/arm/rockchip/rk_anxdp.c: revision 1.1
sys/dev/ic/dwc_mmc_var.h: revision 1.9
sys/dev/i2c/rkpmic.c: revision 1.4
sys/arch/arm/rockchip/rk_anxdp.c: revision 1.2
sys/dev/i2c/rkpmic.c: revision 1.5
sys/dev/i2c/rkpmic.c: revision 1.6
sys/arch/arm/rockchip/rk_vop.c: revision 1.4
sys/arch/arm/rockchip/rk_vop.c: revision 1.5
sys/dev/i2c/rkpmic.c: revision 1.8
sys/arch/arm/dts/rk3399-pinebook-pro.dts: revision 1.1
sys/dev/usb/ums.c: revision 1.96 (via patch)
sys/arch/arm/rockchip/rk_pwm.c: revision 1.3
sys/arch/arm/dts/rk3399-pinebook-pro.dts: revision 1.2
sys/dev/i2c/es8316ac.c: revision 1.1
sys/dev/fdt/dwcmmc_fdt.c: revision 1.10
sys/dev/i2c/es8316ac.c: revision 1.2
sys/dev/fdt/fdt_panel.c: revision 1.1
sys/dev/ic/dwc_mmc.c: revision 1.18
sys/dev/fdt/fdt_panel.c: revision 1.2
sys/dev/ic/dwc_mmc.c: revision 1.19
sys/arch/arm/dts/rk3399-rockpro64.dts: revision 1.10
sys/dev/fdt/fdt_port.c: revision 1.5
sys/dev/ic/dwc_mmc_var.h: revision 1.10
sys/dev/fdt/fdt_port.c: revision 1.6
sys/arch/evbarm/conf/GENERIC64: revision 1.122
sys/dev/ic/dwc_mmc_var.h: revision 1.11
sys/dev/fdt/files.fdt: revision 1.50
sys/arch/evbarm/conf/GENERIC64: revision 1.123
sys/arch/arm/rockchip/rk_i2s.c: revision 1.2
sys/arch/arm/rockchip/files.rockchip: revision 1.23
sys/arch/evbarm/conf/GENERIC64: revision 1.124
sys/dev/ic/anx_dp.c: revision 1.1
rkpmic: add RTC support; register w/ todr(9)
rkpmic: correct delay
Add support for SDIO interrupts.
fix copy/paste error in mux_pll_src_cpll_gpll_ppll_parents[]
add RK3399 eDP clocks
add RK3399 DisplayPort clocks
style fix/KNF
rk3399_cru: implement dclk_vop0_frac and dclk_vop1_frac
Move drm_encoder from rkvop(4) to the SoC-layer output pipe drivers (rk_dwhdmi).
rkvop: set stride using virtual framebuffer width instead of display mode
rk3399_cru: Reparent dclk_vop[01] to gpll via dclk_vop[01]_frac.
The previous source of dclk_vop[01] was vpll via dclk_vop[01]_div.
vpll is apparently used directly as a pixel clock source for the
HDMI PHY, and we don't want the other VOP's dclk changing out from
under it because we can't handle finding a replacement clock source
with the right rate yet.
gpll happens to run at 594MHz, which works well as a basis for pixel
clocks.
Linux suggests that the source clock of the fractional divider needs
to be more than twenty times greater than the resulting clock (or some
intermediate clock?) for output stability. This may not be the case
with 594MHz and the common pixel clocks I see used by displays in my
area of the wild, but it works for now.
add Analogix DisplayPort core driver
add Rockchip (RK3399) glue for Analogix DisplayPort core
add anxdp(4)
Add another panel@fdt driver, this time for DRM-style panels.
To do: migrate away from other panel driver.
enable panel at fdt drivers
paper over the rkpwm get_conf function that otherwise doesn't seem to
let things work
add template bits for optional eDP panel on RockPro64
Abort panel driver attach if required regulator is missing.
Add clk provider
Add Pinebook Pro dts, from Manjaro Linux.
https://gitlab.manjaro.org/tsys/linux-pinebook-pro/blob/877ca0e7283596f37845de50dc36bff5b88b91e1/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+ rk3399-pinebook-pro.dts
Attach mmcpwrseq resource earlier
dwcmmc improvements:
- Use mmcpwrseq resources if available
- Only set 4- or 8-bit mode if specified in the dt properties
- Add quirk for implementations with inverted power enable logic
- Support switching signal voltage between 1.8V and 3.3V
- Fix a clock divider issue on Rockchip SoCs
Fix performance regression with previous
Quiet chatty printfs
No need to print all supported levels at attach, print the range and total number of steps
Disable SPI for now (rkspi driver hangs at boot)
Add driver for simple-audio-amplifier binding
Add driver for Everest Semi ES8316 Low Power Audio CODEC
add es8316, simpleamp
Avoid sleeping while the audio intr lock is held.
If the rockchip,system-power-controller property is present, try to power off with the PMIC
Add HAILUCK keyboard (product 1e)
Add a quirk for the HAILUCK USB keyboard / touchpad device with product 1e.
The keyboard does not function properly unless the touchpad's intr endpoint
is active.
Add driver for CellWise CW2015 Fuel Gauge IC.
add cwfg
Emit PMFE_DISPLAY_{ON,OFF} events in response to DPMS requests.
If the backlight node does not have an enable gpio, set the lowest duty
cycle to turn the display off instead.
Attach psci as early as possible. This allows other power controllers to
register their own poweroff / reset callbacks with a higher preference.
Add 2000 MHz to available armclkb rates
Remove debug printfs
|
| 1.44.4.2 |
| 27-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #491):
sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
sys/arch/arm/ti/ti_sysc.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.2
sys/dev/i2c/tps65950.c: file removal
sys/arch/evbarm/conf/std.ti: file removal
sys/dev/i2c/files.i2c: revision 1.101
sys/dev/i2c/files.i2c: revision 1.102
sys/dev/i2c/at24cxx.c: revision 1.32
sys/dev/i2c/files.i2c: revision 1.103
sys/dev/i2c/twl4030.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.104
sys/dev/i2c/twl4030.c: revision 1.2
sys/dev/i2c/twl4030.c: revision 1.3
sys/arch/arm/ti/ti_com.c: revision 1.6
sys/arch/arm/ti/ti_com.c: revision 1.7
sys/arch/arm/ti/ti_com.c: revision 1.8
sys/dev/fdt/cpufreq_dt.c: revision 1.11
sys/arch/arm/ti/ti_iic.c: revision 1.1
sys/dev/fdt/cpufreq_dt.c: revision 1.12
sys/arch/arm/ti/ti_usb.c: revision 1.1
sys/arch/arm/ti/ti_iic.c: revision 1.2
sys/dev/fdt/cpufreq_dt.c: revision 1.13
sys/arch/arm/ti/ti_iic.c: revision 1.3
sys/arch/arm/ti/ti_iic.c: revision 1.4
sys/arch/evbarm/conf/files.ti: file removal
sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
sys/arch/arm/dts/omap3-n900.dts: revision 1.1
sys/arch/arm/ti/ti_edma.h: revision 1.1
sys/arch/evbarm/conf/OVERO_INSTALL: file removal
sys/arch/arm/ti/ti_usbtll.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.5
etc/etc.evbarm/Makefile.inc: revision 1.108
sys/arch/arm/ti/files.ti: revision 1.6
sys/dev/i2c/tps65217pmic.c: revision 1.13
etc/etc.evbarm/Makefile.inc: revision 1.109
sys/arch/arm/ti/files.ti: revision 1.7
sys/dev/i2c/tps65217pmic.c: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.8
sys/arch/arm/ti/files.ti: revision 1.9
sys/dev/fdt/usbnopphy.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.55
sys/arch/evbarm/conf/GENERIC: revision 1.56
sys/arch/evbarm/conf/GENERIC: revision 1.57
sys/arch/evbarm/conf/GENERIC: revision 1.58
sys/arch/evbarm/conf/GENERIC: revision 1.59
sys/arch/evbarm/conf/BEAGLEBONE: file removal
sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
sys/arch/arm/ti/ti_otgreg.h: revision 1.1
sys/arch/arm/ti/ti_tptc.c: revision 1.1
sys/arch/evbarm/conf/IGEPV2: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.10
sys/dev/i2c/tda19988.c: revision 1.1
sys/arch/evbarm/conf/OVERO: file removal
sys/dev/i2c/tda19988.c: revision 1.2
sys/dev/i2c/tda19988.c: revision 1.3
sys/arch/arm/ti/omap3_dss.c: revision 1.1
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
sys/arch/arm/ti/ti_omapintc.c: revision 1.2
etc/etc.evbarm/Makefile.inc: revision 1.112
etc/etc.evbarm/Makefile.inc: revision 1.113
sys/arch/arm/ti/ti_div_clock.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revision 1.114
sys/arch/evbarm/conf/N900: revision 1.32
sys/arch/evbarm/conf/N900: revision 1.33
distrib/utils/embedded/conf/armv7.conf: revision 1.36
sys/arch/evbarm/conf/GENERIC: revision 1.60
distrib/utils/embedded/conf/armv7.conf: revision 1.37
sys/arch/arm/ti/omap2_nand.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.61
sys/arch/arm/ti/omap2_nand.c: revision 1.2
sys/arch/evbarm/conf/GENERIC: revision 1.62
distrib/utils/embedded/conf/armv7.conf: revision 1.39
sys/arch/evbarm/conf/GENERIC: revision 1.63
sys/arch/arm/ti/ti_fb.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.64
sys/arch/evbarm/conf/GENERIC: revision 1.65
sys/arch/evbarm/conf/GENERIC: revision 1.66
sys/arch/evbarm/conf/GENERIC: revision 1.67
sys/arch/arm/ti/ti_platform.c: revision 1.7
sys/arch/arm/ti/ti_platform.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.2
sys/arch/arm/ti/ti_platform.c: revision 1.9
sys/arch/arm/ti/am3_prcm.c: revision 1.3
sys/arch/arm/ti/am3_prcm.c: revision 1.4
sys/arch/arm/ti/am3_prcm.c: revision 1.5
sys/arch/arm/ti/am3_prcm.c: revision 1.6
sys/arch/arm/ti/am3_prcm.c: revision 1.7
sys/arch/evbarm/conf/DEVKIT8000: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.9
sys/dev/fdt/syscon.c: revision 1.4
sys/arch/arm/ti/files.ti: revision 1.10
sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.11
sys/arch/arm/ti/if_cpswreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.12
sys/arch/arm/ti/ti_sdhc.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.13
sys/arch/arm/ti/files.ti: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.15
sys/arch/arm/ti/files.ti: revision 1.16
sys/arch/arm/ti/omap3_cm.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.17
sys/arch/arm/ti/omap3_cm.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.18
sys/arch/arm/ti/omap3_cm.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.19
sys/arch/arm/ti/omap3_cm.c: revision 1.4
sys/arch/arm/ti/ti_motg.c: revision 1.1
sys/arch/arm/ti/ti_rngreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
sys/arch/arm/ti/am3_platform.c: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.22
sys/arch/evbarm/conf/README.evbarm: revision 1.23
sys/arch/arm/ti/ti_platform.c: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.24
sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
sys/arch/arm/ti/ti_prcm.c: revision 1.2
sys/arch/evbarm/conf/README.evbarm: revision 1.25
sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
sys/arch/arm/ti/ti_prcm.c: revision 1.3
sys/arch/evbarm/conf/README.evbarm: revision 1.26
sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
sys/arch/evbarm/conf/README.evbarm: revision 1.27
sys/arch/arm/ti/ti_ehci.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.20
sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
sys/arch/evbarm/conf/OVERO: revision 1.56
sys/arch/evbarm/conf/TI: file removal
sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.55
sys/dev/fdt/fdtvar.h: revision 1.56
distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
sys/dev/fdt/fdt_phy.c: revision 1.6
sys/arch/arm/ti/ti_iicreg.h: revision 1.1
sys/arch/arm/ti/ti_lcdc.c: revision 1.1
sys/arch/arm/ti/ti_gpio.c: revision 1.1
sys/arch/arm/ti/ti_iicreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.c: revision 1.2
sys/dev/fdt/files.fdt: revision 1.46
sys/arch/arm/ti/ti_gpio.c: revision 1.2
sys/arch/arm/ti/ti_iicreg.h: revision 1.3
sys/arch/arm/ti/ti_lcdc.c: revision 1.3
sys/dev/fdt/files.fdt: revision 1.47
sys/arch/arm/ti/ti_gpio.c: revision 1.3
sys/dev/fdt/pinctrl_single.c: revision 1.1
sys/arch/evbarm/conf/files.generic: revision 1.9
sys/arch/arm/ti/ti_gpmc.c: revision 1.1
sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARD: file removal
sys/arch/arm/ti/omap3_prm.c: revision 1.1
sys/arch/arm/ti/ti_platform.h: file removal
sys/arch/arm/ti/omap3_platform.c: revision 1.1
sys/arch/arm/ti/ti_prcm.h: revision 1.2
sys/arch/arm/ti/omap3_platform.c: revision 1.2
sys/arch/arm/ti/ti_prcm.h: revision 1.3
sys/arch/arm/ti/ti_prcm.h: revision 1.4
sys/dev/fdt/fdt_clock.c: revision 1.9
sys/arch/arm/ti/ti_edma.c: revision 1.1
sys/arch/arm/ti/ti_otg.c: revision 1.1
distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
sys/arch/arm/ti/if_cpsw.c: revision 1.7
sys/arch/evbarm/conf/std.igepv2: file removal
sys/arch/arm/ti/if_cpsw.c: revision 1.8
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1
Adapt ti fdt glue to support GENERIC kernel.
Do not search 64-bit directories for dts files
Fix am33xx_platform_early_putchar for pre-MMU output
Add bus driver for TI sysc interconncet.
Make com work again
Add EDMA TPCC and TPTC drivers.
Add driver for one-register-per-pin type pinctrl devices.
Add MMCHS support.
Add USB support.
Disable autoidle
Place devmap above KERNEL_IO_VBASE
Use Timer2 for timecounter, and enable hw module.
Add support for TI AM335x
Add atmel,24c256 compat data
Add I2C support.
Add tiiic, tps65217pmic
Add FDT support
Fix early putchar, add reset func
No support for tegra210 in armv7 kernel
Switch to GENERIC kernels only.
Get mac address from DT
Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
enumerate devices under child "clocks" node
Add support for platform specific opp table filters.
Add fdtbus_clock_count to count the number of clock references on a given node
enumerate devices under child "clocks" node
Add AM335x DVFS support.
Enable TI AM335x DVFS support
Add support for GPIO controller.
Add tigpio
Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
Add support for hardware RNG.
Add tirng
Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c
Set stdout-path on TI OMAP3 BeagleBoard
Add support for TI OMAP3.
Add OMAP3 support.
Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.
Skip xref if it is 0
Add generic USB PHY driver
Add driver for TI TWL4030 Power Management IC
Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.
Add OMAP3 USB support.
Add twl, usbnopphy, tiusb, tiusbtll
Move omap3 dtb files to /boot/dtb
Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)
Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.
Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required
Set the stdout-path on xM like Ti OMAP3 BeagleBoard
Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)
Handle different register layout on OMAP3
Add omapfb to FDT-ized TI port.
Use dss as console on Nokia N900.
Enable IRQ status bits for omap3 type and set speed properly
Add RTC support
Remove tps65950pm (hardware now supported by twl4030.c)
Add NAND flash support.
Add tigpmc, omapnand
Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)
Fix non-FDT build
Cleanup and remove dependency on arch/arm/omap
Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties
Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.
Remove commented out IGEPV2 entry
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.
No longer used.
Also match ti,omap2-onenand
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
Add driver for NXP TDA19988 HDMI encoder
Add support for AM335x display controller (LCDC).
Add tdahdmi, tilcdc, tifb
Test DRM_MODE_* flags, not VID_*
Comment out mode fixup (not needed it seems)
Use 297MHz for display clock
Select closest rate to desired pixel clock
Speed up mode setting a bit and turn off the display while changing modes
|
| 1.44.4.1 |
| 18-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #438):
sys/dev/fdt/spdif_tx.c: revision 1.1
sys/arch/evbarm/conf/GENERIC64: revision 1.114
sys/dev/fdt/files.fdt: revision 1.48
Add driver for dummy spdif transmitter bindings.
Add spdiftx
|
| 1.50.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
| 1.56.2.2 |
| 03-Jan-2021 |
thorpej | Sync w/ HEAD.
|
| 1.56.2.1 |
| 14-Dec-2020 |
thorpej | Sync w/ HEAD.
|
| 1.60.4.1 |
| 13-May-2021 |
thorpej | Sync with HEAD.
|
| 1.61.10.1 |
| 18-Jan-2022 |
thorpej | G/C fdtbus_register_spi_controller(); it serves no purpose in the new
universe.
|
| 1.73.4.1 |
| 16-Sep-2025 |
snj | Pull up following revision(s) (requested by rin in ticket #31):
sys/arch/arm/fdt/files.fdt: revision 1.37
sys/arch/riscv/fdt/files.fdt: revision 1.5
sys/dev/fdt/files.fdt: revision 1.75 via patch
Prune fdt_platform.c from sys/dev/fdt/files.fdt and explicitly pull
in at sys/arch/arm/fdt/files.fdt and sys/arch/riscv/fdt/files.fdt.
Unbreaks OCTEON build.
|
