| History log of /src/sys/dev/ic/dwc_mmc_reg.h |
| Revision | | Date | Author | Comments |
| 1.11 |
| 09-Jan-2022 |
jmcneill | dwcmmc: Add support for card detect using SDMMC_CDETECT register
|
| 1.10 |
| 20-Mar-2020 |
skrll | Add DWC_MMC_VERID_280A
|
| 1.9 |
| 22-Jan-2020 |
jmcneill | dwc_mmc fixes:
- Rockchip uses a different SDIO int bit, so take this into consideration
- Avoid unnecessary resets and always wait for resets to complete
- kpause instead of delay while holding spinlock
- Do not attempt autostop for SD_IO_RW_EXTENDED commands
- Allow for sub-blklen byte counts for single block transfers
|
| 1.8 |
| 22-Jan-2020 |
jmcneill | Fix DWC_MMC_INT_SDIO_INT bit
|
| 1.7 |
| 16-Jun-2018 |
jmcneill | branches: 1.7.2; 1.7.8; 1.7.10;
Add VERID reg bits
|
| 1.6 |
| 19-Jun-2017 |
jmcneill | branches: 1.6.4; 1.6.6;
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
|
| 1.5 |
| 27-Dec-2015 |
jmcneill | branches: 1.5.10;
add some extra regs
|
| 1.4 |
| 17-Jan-2015 |
jmcneill | branches: 1.4.2;
fix previous
|
| 1.3 |
| 17-Jan-2015 |
jmcneill | improve intr reg debugging
|
| 1.2 |
| 27-Dec-2014 |
jmcneill | - Explicitly initialize CLKSRC register.
- Reset FIFO and DMA along with controller.
- Support chips with inverted PWREN logic.
- Enable RXDR and TXDR irqs.
- Set max clk based on supplied clock freq.
- Use external clk control as well as internal divisor to set clock rates.
Requires bus glue to implement sc_set_clkdiv callback.
|
| 1.1 |
| 27-Dec-2014 |
jmcneill | add DesignWare SD/MMC controller driver
|
| 1.4.2.4 |
| 28-Aug-2017 |
skrll | Sync with HEAD
|
| 1.4.2.3 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.4.2.2 |
| 06-Apr-2015 |
skrll | Sync with HEAD
|
| 1.4.2.1 |
| 17-Jan-2015 |
skrll | file dwc_mmc_reg.h was added on branch nick-nhusb on 2015-04-06 15:18:09 +0000
|
| 1.5.10.1 |
| 18-Jul-2017 |
snj | Pull up following revision(s) (requested by jmcneill in ticket #114):
sys/arch/arm/samsung/exynos_intr.h: revision 1.3
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1
distrib/utils/embedded/mkimage: revision 1.66
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7
sys/dev/gpio/gpio.c: revision 1.59
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1
sys/conf/Makefile.kern.inc: revision 1.257
sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2
sys/conf/Makefile.kern.inc: revision 1.258
sys/arch/arm/fdt/psci_fdt.h: revision 1.1
sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1
sys/arch/evbarm/conf/files.sunxi: revision 1.1
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9
sys/arch/arm/samsung/files.exynos: revision 1.22
distrib/utils/embedded/conf/armv7.conf: revision 1.13
sys/arch/arm/samsung/files.exynos: revision 1.23
sys/arch/evbarm/conf/std.tegra: revision 1.15
distrib/utils/embedded/conf/armv7.conf: revision 1.14
sys/arch/arm/samsung/files.exynos: revision 1.24
distrib/utils/embedded/conf/armv7.conf: revision 1.15
sys/arch/evbarm/sunxi/genassym.cf: revision 1.1
sys/arch/arm/samsung/exynos_fdt.c: file removal
sys/dev/fdt/fdt_pinctrl.c: revision 1.4
sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1
sys/dev/usb/ehci.c: revision 1.255
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1
sys/dev/ic/dwc_mmc.c: revision 1.11
sys/arch/arm/cortex/gic.c: revision 1.24
distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17
etc/etc.evbarm/Makefile.inc: revision 1.87
etc/etc.evbarm/Makefile.inc: revision 1.88
sys/arch/arm/fdt/gic_fdt.c: revision 1.5
etc/Makefile: revision 1.429
sys/arch/arm/fdt/gic_fdt.c: revision 1.6
sys/arch/arm/fdt/gic_fdt.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2
sys/arch/evbarm/conf/std.sunxi: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3
sys/arch/evbarm/conf/std.sunxi: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4
sys/arch/evbarm/conf/std.sunxi: revision 1.3
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1
sys/dev/gpio/gpiovar.h: revision 1.17
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8
sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.12
sys/dev/fdt/fdtvar.h: revision 1.21
sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.13
sys/dev/fdt/fdtvar.h: revision 1.22
sys/arch/evbarm/conf/SUNXI: revision 1.10
sys/dev/fdt/fdtvar.h: revision 1.23
sys/arch/evbarm/conf/SUNXI: revision 1.11
sys/dev/fdt/gpioleds.c: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.24
sys/arch/evbarm/conf/SUNXI: revision 1.12
sys/arch/evbarm/conf/SUNXI: revision 1.13
sys/arch/arm/cortex/gic.c: revision 1.30
sys/arch/evbarm/conf/SUNXI: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.16
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1
etc/Makefile: revision 1.430
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2
etc/Makefile: revision 1.431
sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4
sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6
sys/arch/arm/samsung/exynos_platform.c: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.29
sys/arch/arm/samsung/exynos_platform.c: revision 1.2
sys/arch/evbarm/conf/mk.vexpress: revision 1.3
sys/arch/arm/samsung/exynos_platform.c: revision 1.3
sys/arch/evbarm/conf/mk.vexpress: revision 1.4
sys/arch/arm/samsung/exynos_platform.c: revision 1.4
sys/arch/arm/arm/psci.h: revision 1.1
sys/arch/arm/samsung/exynos_platform.c: revision 1.5
sys/arch/arm/samsung/exynos_platform.c: revision 1.6
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10
external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12
sys/dev/fdt/files.fdt: revision 1.17
sys/dev/fdt/files.fdt: revision 1.18
sys/dev/fdt/files.fdt: revision 1.19
sys/arch/arm/samsung/exynos_sscom.c: revision 1.8
sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1
sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1
sys/arch/arm/samsung/exynos_sscom.c: revision 1.9
sys/arch/arm/conf/files.arm: revision 1.133
sys/arch/arm/samsung/mct_var.h: revision 1.5
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2
sys/arch/evbarm/conf/std.vexpress: revision 1.6
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.30
sys/arch/arm/sunxi/files.sunxi: revision 1.2
sys/dev/ofw/openfirm.h: revision 1.35
sys/arch/arm/sunxi/files.sunxi: revision 1.3
sys/dev/ofw/openfirm.h: revision 1.36
sys/arch/arm/sunxi/files.sunxi: revision 1.4
sys/arch/arm/sunxi/files.sunxi: revision 1.5
sys/arch/evbarm/exynos/exynos_machdep.c: file removal
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1
sys/arch/arm/samsung/sscom.c: revision 1.9
sys/arch/arm/sunxi/files.sunxi: revision 1.6
sys/dev/fdt/ohci_fdt.c: revision 1.1
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.7
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.8
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.9
sys/arch/arm/samsung/exynos_sscom.c: revision 1.10
sys/arch/evbarm/conf/mk.tegra: revision 1.5
sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4
sys/arch/evbarm/conf/mk.tegra: revision 1.6
sys/arch/evbarm/conf/EXYNOS: revision 1.15
sys/arch/evbarm/conf/EXYNOS: revision 1.16
sys/arch/evbarm/conf/EXYNOS: revision 1.17
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.19
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5
sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1
sys/arch/evbarm/conf/mk.sunxi: revision 1.1
sys/arch/evbarm/include/bootconfig.h: revision 1.7
sys/arch/evbarm/conf/TEGRA: revision 1.24
sys/arch/arm/arm/psci.c: revision 1.1
sys/dev/led.c: revision 1.1
sys/dev/led.c: revision 1.2
sys/arch/arm/arm/psci_arm.S: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2
sys/dev/fdt/ehci_fdt.c: revision 1.1
sys/dev/fdt/ehci_fdt.c: revision 1.2
sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.21
sys/arch/arm/sunxi/files.sunxi: revision 1.10
sys/arch/arm/sunxi/files.sunxi: revision 1.11
sys/dev/fdt/fdtbus.c: revision 1.14
sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1
sys/arch/arm/samsung/exynos5422_dma.c: file removal
usr.bin/config/mkmakefile.c: revision 1.69
sys/conf/files: revision 1.1178
sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1
sys/arch/evbarm/exynos/exynos_start.S: revision 1.4
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12
sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2
sys/arch/evbarm/conf/SUNXI: revision 1.1
external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.2
sys/arch/arm/fdt/psci_fdt.c: revision 1.1
sys/arch/evbarm/conf/SUNXI: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.4
sys/arch/evbarm/conf/files.exynos: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.6
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1
sys/dev/fdt/fixedfactorclock.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.7
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.8
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3
sys/dev/ic/dwc_mmc_reg.h: revision 1.6
sys/dev/fdt/fdt_subr.c: revision 1.16
sys/arch/evbarm/conf/SUNXI: revision 1.9
usr.bin/config/mkmakefile.c: revision 1.70
sys/dev/fdt/fdt_phy.c: revision 1.1
sys/arch/evbarm/conf/ODROID-XU: file removal
sys/arch/arm/fdt/arm_fdt.c: revision 1.4
sys/arch/arm/samsung/exynos_reg.h: revision 1.14
sys/conf/files: revision 1.1180
sys/arch/arm/samsung/exynos_reg.h: revision 1.15
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6
sys/dev/ic/dwc_mmc_var.h: revision 1.6
sys/arch/arm/samsung/exynos_combiner.c: revision 1.7
sys/arch/evbarm/exynos/platform.h: revision 1.2
sys/arch/arm/fdt/files.fdt: revision 1.12
sys/arch/evbarm/conf/std.exynos: revision 1.2
sys/arch/evbarm/conf/std.exynos: revision 1.3
sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6
sys/arch/arm/sunxi/sunxi_com.c: revision 1.1
sys/dev/led.h: revision 1.1
sys/arch/evbarm/conf/std.exynos: revision 1.5
sys/arch/arm/sunxi/sunxi_com.c: revision 1.2
sys/arch/evbarm/conf/files.evbarm: revision 1.26
usr.bin/config/defs.h: revision 1.99
sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6
sys/arch/arm/samsung/exynos_soc.c: revision 1.32
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2
sys/arch/arm/samsung/mct.c: revision 1.11
sys/arch/evbarm/conf/ODROID-U: file removal
sys/arch/arm/samsung/mct.c: revision 1.12
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4
Get the EXYNOS kernel building again with recent FDT changes. Untested.
Use arm_fdt_cpu_hatch and add mmu entry for DTB
Fix exynos5 devmap, bootstrap, and implement early_putchar.
Calculate UART frequency based on bootloader config.
Fix KERNEL_BASE_PHYS (how did this ever work?)
Avoid divide-by-zero for unconfigured PLLs
Correctly initialize i2cbus attach args.
Add delay and enable mct timecounter.
Fix build w/o VERBOSE_INIT_ARM
Remove ODROID-U and ODROID-XU kernel configs as they no longer work.
- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local
Use fdtbus_intr_establish to hook in block interrupts instead of
intr_establish.
Simplify MCT; just enable it and then attach an ARMv7 generic timer.
Add support for building DTB files during kernel build, from christos.
build vexpress-v2p-ca15-tc1.dtb with the kernel
build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel
Allow multiline makeoptions to work by quoting the newline..
Bump for quoting makeoptions with multiple lines.
un-c99
bump required config version for multiline makeoptions feature
Set DTS makeoption in kernel config
Assign DTB files to a variable so we can make -V DTB
put the dtb files with their kernels.
no need for debug printing.
Don't assume that CPU index = GIC CPU interface number. We can determine
the current CPU interface number by reading from the read-only
GICD_ITARGETSR0 through GICD_ITARGETSR7 registers.
This gets interrupts working on Exynos 5422, where the boot processor has
GIC CPU interface #4.
use -v to get the expanded variable.
Use -v to get the expanded variables.
Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach.
Fix PLL con0 register locations and add uart clocks
Disable exyortc for now, it doesn't work.
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
Update for new dwc_mmc driver
Fix dmesg
Add Exynos 5410 clock controller driver.
Fix a few typos in clock parent names for mmc clocks.
From jmcneill@
Update for new dwc_mmc driver
Implement platform reset for exynos5
Attach fdtbus to a /clocks node with no compatible string.
Add support for ARM Power State Coordination Interface (PSCI).
Support interrupt sharing.
Add initial support for Allwinner H3 SoC.
ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF,
U-Boot on some platforms may use SGIs in this range for the PSCI
implementation.
Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert
to ensure that we don't end up with a conflict.
Add H3 MMC support
SD/MMC clock fixes
Add FDT PHY interface.
Add glue for generic ehci/ohci bindings.
Rename a variable, NFC.
Support parents in different clock domains.
Add USB stuff. Doesn't quite work yet.
Synopsys DesignWare APB UART needs "options COM_AWIN" for now.
Add i2c glue.
Add RTC driver.
PHY registers start at index 1. Now USB works.
Don't allow sharing edge and level triggered interrupts.
Add arm_fdt_memory_dump helper for dumping physical addresses from ddb
Print clocks with aprint_debug
Remove unused defines
Add fdtbus_get_string helper
Add of_search_compatible, which searches an array of compat_data structures
for a matching "compatible" entry matching the supplied OFW node. This
allows us to associate data with compatible strings.
Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and
later family SoCs.
This is a port of my FreeBSD driver which has been confirmed to work on
Allwinner H3, A83T, and A64 SoCs.
Fix dmesg
Add basic support for Allwinner A31.
Add basic FDT GPIO support.
Fix the pinctrl api to match the spec. A pinctrl config can have more
than one xref, and an xref may have specifier data associated with it.
Enable sunxi pinctrl support
Adjust to new pinctrl API
Add P2WI/RSB driver, based on awin_p2wi.c.
Fix typo in a compat string.
Configure pin defaults at attach
No need to explicitly set pinctrl config 0 now
Fix some register definitions.
Disallow sharing between MPSAFE and non-MPSAFE handlers.
Add of_match_compat_data.
This routine searches an array of compat_data structures for a
matching "compatible" entry matching the supplied OFW node.
Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP
Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.
the extent code cannot use the full range of u_long,
so ignore the last page before 4GB too. ok jmcneill@
Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
Let the controller provide a default name for pins. This makes pins easier
to locate when we have multiple banks and a variable number of pins per
bank.
Attach gpio(4) to sunxigpio
Test for kernel build directory before reading DTB list
Add support for Allwinner A83T SoC.
Add A83T files
Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints.
Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac
Restore TX_INTERVAL_DEFAULT to 64
Drop the sunxi_emac_rx_batch feature. It was originally designed to
reduce the amount of mutex unlock/lock cycles during the RX path on
FreeBSD and if_input, but it is not required to drop the lock before
calling if_percpuq_enqueue on NetBSD.
Write back the data value instead of mask in sunxi_gpio_write
Add a helper for exposing LED controls via sysctl.
Add GPIO LED driver.
add gpioleds
Add misc. gates and resets driver, and explicitly enable PIO clocks
at attach.
Add fdtbus_get_string_index helper.
Add driver for fixed-factor clocks.
Add ffclock
Remove the requirement for ehci to attach after companion devices.
"go for it" - skrll@
Remove the hack to find companion devices and just assume 1 companion if
ETTF flag is not set.
Remove pass numbers for ehci/ohci now that the attach order no longer matters
Use unsigned char for ctype functions, suggested by christos
Add : to body of populate_sunxi to appease bash.
port-evbarm/52388: Fix number of args to a debug printf.
|
| 1.6.6.1 |
| 25-Jun-2018 |
pgoyette | Sync with HEAD
|
| 1.6.4.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.6.4.1 |
| 19-Jun-2017 |
jdolecek | file dwc_mmc_reg.h was added on branch tls-maxphys on 2017-12-03 11:37:03 +0000
|
| 1.7.10.1 |
| 25-Jan-2020 |
ad | Sync with head.
|
| 1.7.8.2 |
| 21-Mar-2020 |
martin | Pull up following revision(s) (requested by skrll in ticket #800):
sys/dev/ic/dwc_mmc_var.h: revision 1.14
sys/dev/ic/dwc_mmc_reg.h: revision 1.10
sys/dev/ic/dwc_mmc.c: revision 1.23
sys/dev/ic/dwc_mmc.c: revision 1.24
sys/dev/ic/dwc_mmc.c: revision 1.25
sys/dev/ic/dwc_mmc.c: revision 1.26
Release the sc_intr_lock on error
Trailing whitespace
Add DWC_MMC_VERID_280A
Remember / use sc_verid
Disable thrctrl or now and note why
|
| 1.7.8.1 |
| 25-Feb-2020 |
martin | Pull up following revision(s) (requested by mrg in ticket #717):
sys/dev/fdt/dwcmmc_fdt.c 1.11
sys/dev/ic/bwfm.c 1.15-1.18
sys/dev/ic/bwfmreg.h 1.4-1.6
sys/dev/ic/bwfmvar.h 1.4,1.5
sys/dev/ic/dwc_mmc.c 1.21,1.22
sys/dev/ic/dwc_mmc_reg.h 1.8,1.9,1.12,1.13
sys/dev/pcmcia/pcmciareg.h 1.11
sys/dev/sdmmc/if_bwfm_sdio.c 1.4,1.6-1.12
sys/dev/sdmmc/if_bwfm_sdio.h 1.1,1.2
sys/dev/sdmmc/sdhc.c 1.105,1.106
sys/dev/sdmmc/sdmmc.c 1.37,1.39
sys/dev/sdmmc/sdmmc_cis.c 1.6,1.8
sys/dev/sdmmc/sdmmc_io.c 1.15-1.19
sys/dev/sdmmc/sdmmc_ioreg.h 1.4,1.5
sys/dev/sdmmc/sdmmc_mem.c 1.69-1.71
sys/dev/sdmmc/sdmmcdevs 1.5-1.8
sys/dev/sdmmc/sdmmcvar.h 1.31,1.33,1.34
sys/net/if_media.h 1.66
Add Broadcom devices
-
Fix typo
-
add PCMCIA_CISTPL_SDIO definition.
-
From OpenBSD:
- move event handling to workqueue
- check for save/restore capability
-
Tag work queue as MPsafe and increase length.
-
Juse use bpf_mtap(), the 802.11 encapsulation is handled by firmware.
-
From OpenBSD:
- support block length per function
- add functions to read/write regions
-
Decode (but not use) SDIO tuple in CIS.
-
Fix locking.
-
Add more SDIO defines (partially from version 3.0).
-
From OpenBSD:
- All the missing pieces (firmware load, chip setup, protocol handling)
TX queue and interrupt handling via sdmmc_task.
-
Fix locking.
-
Fix packet parsing.
-
Add parser for original firmware config files.
-
tagging work queue as MPSAFE was premature. Revert.
-
SD_IO_RW_EXTENDED is a data transfer command, so set ADTC flag instead of AC
Use correct function to verify if a task has been queued. Avoids race
that can corrupt the task queue.
-
More register definitions.
-
Add IFM_IEEE80211_VHT subtype, IFM_IEEE80211_11AC operating mode, and missing descriptions
-
If firmware is connected in HT or VHT mode, report it to SIOCGIFMEDIA
-
white space police.
Skip setting power when the voltage doesn't change.
Also increase some timeouts.
-
Add and use sdmmc_pause to avoid long-term busy waits.
-
Add sdio abort function.
-
Additional error messages.
-
Print parameters for SDIO devices.
-
Minor cosmetics.
-
Simplyfy sdmmc_io_set_blocklen function signature by dropping the
extra softc pointer. Aligns with OpenBSD.
-
Missing commit for sdio abort function.
-
More code from OpenBSD
-
no need to splnet() when enqueing packets
-
explicit structure padding
-
make internal functions static
-
also prepare for GPIO interrupts.
-
Avoid warnings for tautological shifts as sole conditional.
-
Follow the Linux driver an use the FDT "compatible" property to build a
filename for the nvram config file, fall back to the standard filename.
E.g.
[Caching 123 nodes and 1093 properties]
compatible 73696e6f 766f6970 2c627069 2d6d322d "sinovoip,bpi-m2-
0010: 7a65726f 00...... ........ ........ zero"
0015: 616c6c77 696e6e65 722c7375 6e38692d "allwinner,sun8i-
0025: 68322d70 6c757300 ........ ........ h2-plus"
interrupt-parent 00000001 ........ ........ ........ ....
model 42616e61 6e612050 69204250 492d4d32 "Banana Pi BPI-M2
0010: 2d5a6572 6f00.... ........ ........ -Zero"
name 00...... ........ ........ ........ ""
serial-number 30326330 30303432 65636431 36376566 02c00042ecd167ef
0010: 00...... ........ ........ ........ .
-rw-r--r-- 1 root wheel 875 Nov 2 12:06 brcmfmac43430-sdio.AP6212.txt
lrwxr-xr-x 1 root wheel 29 Dec 30 16:19 brcmfmac43430-sdio.sinovoip,bpi-m2-zero.txt -> brcmfmac43430-sdio.AP6212.txt
-rw-r--r-- 1 root wheel 874 Jun 30 2019 brcmfmac43430-sdio.raspberrypi,3-model-b.txt
-rw-r--r-- 1 root wheel 1864 Jun 30 2019 brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
lrwxr-xr-x 1 root wheel 29 Dec 30 11:24 brcmfmac43455-sdio.raspberrypi,4-model-b-plus.txt -> brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
-
Add product ID for Broadcom BCM43455
-
Use correct firmware for BCM43456
-
size check was backwards.
-
Be less noisy for some commands.
-
Fix DWC_MMC_INT_SDIO_INT bit
-
dwc_mmc fixes:
- Rockchip uses a different SDIO int bit, so take this into consideration
- Avoid unnecessary resets and always wait for resets to complete
- kpause instead of delay while holding spinlock
- Do not attempt autostop for SD_IO_RW_EXTENDED commands
- Allow for sub-blklen byte counts for single block transfers
-
More SDIO stability and performance fixes
|
| 1.7.2.1 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
