| History log of /src/sys/dev/ic/stivar.h |
| Revision | | Date | Author | Comments |
| 1.12 |
| 16-Dec-2024 |
macallan | properly declare sti_unitoroman[] and explain what it's for
|
| 1.11 |
| 23-Dec-2020 |
tsutsui | branches: 1.11.24;
Pull the latest OpenBSD sti(4) changes for bitmap framebuffer support.
- bitmap and colormap ops based on old HP ngle X11 driver:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/ic/sti.c#rev1.76
> Work-in-progress support for non-accelerated X11 on *some* sti(4)
> frame buffers; based upon the old HP ngle X11 driver.
> Currently limited to CRX (720/735/750), Timber (710, old 715),
> Artist (712, 715) and EG (B-series), however the
> colormap isn't set up correctly on Timber and EG yet.
>
> Joint work with Artem Falcon, now in good enough shape to be worked further
> in the tree.
- misc other cosmetic changes to reduce diffs
No particular comments on port-hp300@ and port-hppa@:
https://mail-index.netbsd.org/port-hp300/2020/12/19/msg000184.html
https://mail-index.netbsd.org/port-hp300/2020/12/20/msg000185.html
The MD hp300 attachment for SGC CRX (A1659-66001) will be committed
separately.
|
| 1.10 |
| 04-May-2020 |
tsutsui | branches: 1.10.2;
Add bitmap access ops support for EVRX framebuffer on HP9000/425e.
8bpp Xorg wsfb server and mlterm-wscons (formerly mlterm-fb) work.
No particular comment on port-hp300@ and port-hppa@:
https://mail-index.netbsd.org/port-hp300/2020/05/02/msg000170.html
Special thanks to Miod Vallat, for his advice about HP-UX implementation
and binutils patches to disassemble old HP-UX a.out-hp300hpux binaries
(and also contributing his 425e back in 2014).
|
| 1.9 |
| 29-Jun-2014 |
tsutsui | branches: 1.9.34;
Export accessops functions to allow overriding them in MD attachment.
|
| 1.8 |
| 20-Apr-2014 |
tsutsui | Add proper consinit(9) support for sti(4) at sgc framebuffer on hp300.
The cnattach functions for sti(4) and service switch check method
for 425e in com_frodo.c are taken from OpenBSD.
The strategy how to choose the console device in hp300_cninit() is
quite diverged from 4.4BSD and OpenBSD so it's tweaked by me.
Also put several changes in sti_sgc.c to reduce diffs from OpenBSD/hp300.
Tested on 425e and 362 (which still uses gendiofb(4), not sti(4)).
XXX: sti(4) requires uvm_km_alloc(9) and uvm_map_protect(9)
to copy and call ROM functions on the executable memory region, so
it can be called before UVM and related initializations are complete.
Probably it's time to consider about MI "deferred consinit()" API
in init_main.c (or elsewhere) for modern complicated VM system...
|
| 1.7 |
| 11-Jul-2011 |
matt | branches: 1.7.2; 1.7.8; 1.7.12; 1.7.16; 1.7.26;
Fix
error: new qualifiers in middle of multi-level non-const cast are unsafe
by defining the type correctly thereby avoid the cast.
|
| 1.6 |
| 09-Nov-2010 |
skrll | Update sti(4) from OpenBSD bringing across support for sti @ pci.
Thanks to Adam Hoka for testing.
|
| 1.5 |
| 01-Nov-2010 |
skrll | u_intNN_t -> uintNN_t
Same code before and after.
|
| 1.4 |
| 31-Oct-2010 |
skrll | RCSId police.
|
| 1.3 |
| 07-May-2009 |
skrll | branches: 1.3.2; 1.3.4;
device_t/softc split
struct device * -> device_t
struct cfdata * -> cfdata_t
Use aprint*
There are a couple of MI drivers with MD attachments left.
|
| 1.2 |
| 11-Dec-2005 |
christos | branches: 1.2.74; 1.2.90;
merge ktrace-lwp.
|
| 1.1 |
| 26-Aug-2004 |
jkunz | branches: 1.1.2;
Import STI wscons(4) driver from OpenBSD and add new driver for PS/2
keyboard / mouse pots of LASI.
|
| 1.1.2.4 |
| 21-Sep-2004 |
skrll | Fix the sync with head I botched.
|
| 1.1.2.3 |
| 18-Sep-2004 |
skrll | Sync with HEAD.
|
| 1.1.2.2 |
| 03-Sep-2004 |
skrll | Sync with HEAD
|
| 1.1.2.1 |
| 26-Aug-2004 |
skrll | file stivar.h was added on branch ktrace-lwp on 2004-09-03 12:45:18 +0000
|
| 1.2.90.1 |
| 13-May-2009 |
jym | Sync with HEAD.
Commit is split, to avoid a "too many arguments" protocol error.
|
| 1.2.74.1 |
| 16-May-2009 |
yamt | sync with head
|
| 1.3.4.1 |
| 05-Mar-2011 |
rmind | sync with head
|
| 1.3.2.1 |
| 06-Nov-2010 |
uebayasi | Sync with HEAD.
|
| 1.7.26.1 |
| 10-Aug-2014 |
tls | Rebase.
|
| 1.7.16.1 |
| 18-May-2014 |
rmind | sync with head
|
| 1.7.12.1 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.7.8.1 |
| 21-May-2014 |
bouyer | Pull up following revision(s) (requested by tsutsui in ticket #1058):
sys/arch/hp300/conf/files.hp300: revision 1.88
sys/arch/hp300/include/autoconf.h: revision 1.13
sys/dev/ic/sti.c: revision 1.17
sys/arch/hp300/dev/frodo.c: revision 1.31
sys/arch/hp300/conf/GENERIC: revision 1.173
sys/arch/hp300/hp300/machdep.c: revision 1.229
sys/arch/hp300/dev/frodo.c: revision 1.32
sys/arch/hp300/hp300/autoconf.c: revision 1.102
sys/arch/hp300/dev/frodoreg.h: revision 1.5
sys/arch/hp300/stand/common/ite_sti.c: revision 1.1
sys/arch/hp300/stand/common/itevar.h: revision 1.16
sys/arch/hp300/hp300/autoconf.c: revision 1.105
sys/arch/hp300/dev/sti_sgcvar.h: revision 1.1
sys/arch/hp300/stand/common/apci.c: revision 1.12
sys/arch/hp300/stand/common/apci.c: revision 1.13
sys/arch/hp300/dev/dnkbd.c: revision 1.6
sys/arch/hp300/dev/dnkbd.c: revision 1.7
sys/arch/hp300/stand/inst/version: revision 1.12
sys/arch/hp300/dev/com_frodo.c: revision 1.9
sys/arch/hp300/stand/common/ite.c: revision 1.17
sys/arch/hp300/conf/GENERIC: revision 1.181
sys/arch/hp300/dev/sti_sgc.c: revision 1.1
sys/arch/hp300/stand/common/dnkbd.c: revision 1.13
sys/arch/hp300/dev/sti_sgc.c: revision 1.2
sys/dev/ic/stivar.h: revision 1.8
sys/arch/hp300/dev/rtc.c: revision 1.21
sys/arch/hp300/conf/INSTALL: revision 1.56
sys/arch/hp300/conf/INSTALL: revision 1.58
sys/arch/hp300/stand/uboot/version: revision 1.19
sys/arch/hp300/stand/common/samachdep.h: revision 1.17
sys/arch/hp300/stand/common/clock.c: revision 1.12
sys/arch/hp300/dev/mcclock_frodo.c: revision 1.1
sys/arch/hp300/stand/Makefile.buildboot: revision 1.34
sys/arch/hp300/conf/files.hp300: revision 1.87
Add sti at sgc framebuffer.
Ported from OpenBSD by kiyohara@.
Fix a botch on switching from apci (and dca) to MI com(4) 10 years ago.
I.e. fix apci device address per FRODO_BASE macro change
in frodoreg.h rev 1.2. Now bootloader works with serial console
on HP425e (which has only com at frodo).
Thanks to miod@openbsd for providing his 425e.
Add sti(4) at sgc screen console support. From (the late) OpenBSD/hp300.
Tested on HP9000/425e, which was sent from Miod Vallat and
demonstrated at Open Source unConference 2014 Kagawa.
Check the service switch on 425e to select apci serial console.
Taken from OpenBSD/hp300. See the following comment for details:
> * Check the service switch. On the 425e, this is a physical
> * switch, unlike other frodo-based machines, so we can use it
> * as a serial vs internal video selector, since the PROM can not
> * be configured for serial console.
Add proper RealTime Clock support for HP9000/425e.
As the OpenBSD/hp300 page says 425e doesn't have the traditional
RTC at intio (as it also lacks DCA 16550 serial at intio?),
but after a few hour investigation it turns out that
425e uses mc146818 compatible calendar clock in
the Apollo "frodo" utility chip and the frodo chip on
425e actually has the 32kHz OSC and is actually backed up
by the onboard lithium battery.
Tested on HP425e (with mcclock) and HP362 (with old rtc).
Add RTC support for HP9000/425e to bootloader too.
Also put several cleanup:
- make local functions and variables static
- use proper variable types
- some KNF
Note it turns out that extreme slowness of netboot on hp300 is
caused by the too slow access of the traditional RTC chip at intio
(i.e. netboot on 425e is so much faster than others). Oh well.
Add proper consinit(9) support for sti(4) at sgc framebuffer on hp300.
The cnattach functions for sti(4) and service switch check method
for 425e in com_frodo.c are taken from OpenBSD.
The strategy how to choose the console device in hp300_cninit() is
quite diverged from 4.4BSD and OpenBSD so it's tweaked by me.
Also put several changes in sti_sgc.c to reduce diffs from OpenBSD/hp300.
Tested on 425e and 362 (which still uses gendiofb(4), not sti(4)).
XXX: sti(4) requires uvm_km_alloc(9) and uvm_map_protect(9)
to copy and call ROM functions on the executable memory region, so
it can be called before UVM and related initializations are complete.
Probably it's time to consider about MI "deferred consinit()" API
in init_main.c (or elsewhere) for modern complicated VM system...
Also fix the apci device address in dnkbd.c as apci.c rev 1.12:
http://mail-index.netbsd.org/source-changes/2014/04/10/msg053940.html
Finally dnkbd(4) is confirmed working at least on bootloader.
Thanks again to Miod Vallat.
Make the Apollo Domain keyboard actually work.
Tested on HP9000/425e and the keyboard model A1630-82001 R2 (RX-60857-HW)
provided by Miod Vallat. Mouse support needs more work.
Pull random notes on the Apollo Domain keyboard from ancient PR/3528.
Bump versions to denote recent 425e related changes.
Probe mcclock only on 425e to avoid an extra "not configured" message.
Add and enable sti(4) at sgc in install kernels for 425e.
Tested on both serial console and framebuffer console.
(switched by the service switch on the back panel)
|
| 1.7.2.1 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.9.34.2 |
| 28-Dec-2020 |
martin | Pull up following revision(s) (requested by tsutsui in ticket #1162):
sys/dev/ic/stivar.h: revision 1.11
sys/dev/ic/sti.c: revision 1.23
sys/dev/ic/sti.c: revision 1.24
sys/dev/ic/sti.c: revision 1.25
sys/arch/hp300/dev/sti_sgc.c: revision 1.4
Pull the latest OpenBSD sti(4) changes for bitmap framebuffer support.
- bitmap and colormap ops based on old HP ngle X11 driver:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/ic/sti.c#rev1.76
> Work-in-progress support for non-accelerated X11 on *some* sti(4)
> frame buffers; based upon the old HP ngle X11 driver.
> Currently limited to CRX (720/735/750), Timber (710, old 715),
> Artist (712, 715) and EG (B-series), however the
> colormap isn't set up correctly on Timber and EG yet.
>
> Joint work with Artem Falcon, now in good enough shape to be worked further
> in the tree.
- misc other cosmetic changes to reduce diffs
No particular comments on port-hp300@ and port-hppa@:
https://mail-index.netbsd.org/port-hp300/2020/12/19/msg000184.html
https://mail-index.netbsd.org/port-hp300/2020/12/20/msg000185.html
The MD hp300 attachment for SGC CRX (A1659-66001) will be committed
separately.
Add bitmap access ops support for SGC CRX (A1659-66001) framebuffer.
Also modify existing 425e EVRX attachment to use updated MI sti(4) ops
more efficiently.
The Xorg server and mlterm-wscons (that support wsdisplay bitmap) work
fine on SGC hp425t.
No particular comments on port-hp300@ and port-hppa@:
https://mail-index.netbsd.org/port-hp300/2020/12/19/msg000184.html
https://mail-index.netbsd.org/port-hp300/2020/12/20/msg000185.html
Special thanks to Miod Vallat again, for contributing the SGC CRX
framebuffer with the SGC connector and flexible cable for HP9000/425t.
He also contributed DIO-II "Hyperion" monochrome framebuffer and
1 plane grayscale SGC GRX (A1924-66001), and I've confirmed hyper(4)
just works even with Xorg server. I will try GRX as the next project.
Handle WSSCREEN_REVERSE properly. Based on OpenBSD's sti(4).
Also remove WSSCREEN_UNDERLINE from capabilities that is not handled
by sti(4) ROM routines.
Tested on HP9000/425t with CRX.
Ignore WSDISPLAYIO_PUTCMAP in WSDISPLAYIO_MODE_EMUL, i.e. text mode.
The hardware palette settings are handled by the STI ROM in STI_TEXTMODE
and changing cmap could cause mangled text colors at least on CRX on 425t.
Updating CMAP in EMUL mode isn't expected anyway.
Fixes "red or invisible text" after exiting mlterm-wscons on A1659 CRX.
|
| 1.9.34.1 |
| 18-May-2020 |
martin | Pull up following revision(s) (requested by tsutsui in ticket #908):
sys/dev/ic/stivar.h: revision 1.10
sys/dev/ic/sti.c: revision 1.21
sys/arch/hp300/dev/sti_sgc.c: revision 1.3
Add bitmap access ops support for EVRX framebuffer on HP9000/425e.
8bpp Xorg wsfb server and mlterm-wscons (formerly mlterm-fb) work.
No particular comment on port-hp300@ and port-hppa@:
https://mail-index.netbsd.org/port-hp300/2020/05/02/msg000170.html
Special thanks to Miod Vallat, for his advice about HP-UX implementation
and binutils patches to disassemble old HP-UX a.out-hp300hpux binaries
(and also contributing his 425e back in 2014).
|
| 1.10.2.1 |
| 03-Jan-2021 |
thorpej | Sync w/ HEAD.
|
| 1.11.24.1 |
| 02-Aug-2025 |
perseant | Sync with HEAD
|
