| History log of /src/sys/dev/ic/tpmvar.h |
| Revision | | Date | Author | Comments |
| 1.10 |
| 20-Dec-2021 |
riastradh | tpm(4): Fix disabling of rnd source if tpm is deactivated.
Nothing prevents a second worker from being queued when the first one
is about to do rnd_detach_source. Instead, just set a flag so future
requests don't bother running a new thread; if there's a concurrent
one that's already been scheduled on another CPU, well, too bad, we
get a couple extra log messages but that's fine.
A better way to do this would probably be to detect whether the tpm
is deactivated at attach time, but that requires reading more of the
tpm spec than I care to do when there are alternative ways to
procrastinate like scrubbing the toilet.
|
| 1.9 |
| 04-Jan-2021 |
riastradh | dev/ic/tpm: Take advantage of entropy source if available.
If the tpm is deactivated, though, detach the entropy source so we
don't continue to try polling it -- it can't be activated without a
reboot anyway.
|
| 1.8 |
| 04-Jan-2021 |
riastradh | dev/ic/tpm: Tidy up headers.
- Add include guards.
- Add necessary includes.
- Sort includes.
- Use _BYTE_ORDER, not BYTE_ORDER, for public header.
|
| 1.7 |
| 09-Oct-2019 |
maxv | branches: 1.7.8;
Provide a better abstraction for the TPM interface. Report it in the ioctl.
|
| 1.6 |
| 09-Oct-2019 |
maxv | Add suspend support for TPM 2.0 chips. Check the TPM response also for 1.2
chips. Unfortunately I cannot really test this change since ACPI suspend
does not work on any of my laptops.
|
| 1.5 |
| 08-Oct-2019 |
maxv | Improvements in tpm(4):
- Remove interrupt support, do polling only, avoids unnecessary trouble.
- Simplify a few things.
- Fix the suspend function, the SaveState command is 0x98, not 0x9C.
- Make the driver MP-safe.
- Sync the man page with reality.
|
| 1.4 |
| 22-Jun-2019 |
maxv | branches: 1.4.2;
Revamp the TPM driver
* Fix several bugs, and clean up.
* Drop the "legacy" interface, it relied on an undocumented global
variable that was never initialized. It likely had never been tested
either, so good riddance.
* Add support for TPM 2.0 chips via ACPI. For these we use the TIS1.2
interface, same as TPM 1.2.
* Provide an ioctl to fetch TPM information from the driver.
Tested on a Lenovo desktop with ACPI-TPM2.0, an HP laptop ACPI-TPM2.0, a
Dell laptop with ISA-TPM1.2.
|
| 1.3 |
| 27-Oct-2012 |
chs | branches: 1.3.38;
split device_t/softc for all remaining drivers.
replace "struct device *" with "device_t".
use device_xname(), device_unit(), etc.
|
| 1.2 |
| 22-Jan-2012 |
christos | branches: 1.2.4; 1.2.6; 1.2.10;
cosmetic fixes
|
| 1.1 |
| 22-Jan-2012 |
christos | add a tpm driver from bsssd.sourceforge.net
|
| 1.2.10.1 |
| 20-Nov-2012 |
tls | Resync to 2012-11-19 00:00:00 UTC
|
| 1.2.6.3 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.2.6.2 |
| 17-Apr-2012 |
yamt | sync with head
|
| 1.2.6.1 |
| 22-Jan-2012 |
yamt | file tpmvar.h was added on branch yamt-pagecache on 2012-04-17 00:07:37 +0000
|
| 1.2.4.2 |
| 18-Feb-2012 |
mrg | merge to -current.
|
| 1.2.4.1 |
| 22-Jan-2012 |
mrg | file tpmvar.h was added on branch jmcneill-usbmp on 2012-02-18 07:34:24 +0000
|
| 1.3.38.1 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.4.2.2 |
| 03-Aug-2022 |
martin | Pull up following revision(s) (requested by riastradh in ticket #1495):
share/man/man4/tpm.4: revision 1.7
sys/dev/ic/tpm.c: revision 1.17
sys/dev/ic/tpmvar.h: revision 1.10
sys/dev/ic/tpm.c: revision 1.18
sys/dev/ic/tpm.c: revision 1.19
sys/dev/acpi/tpm_acpi.c: revision 1.14
sys/dev/ic/tpmreg.h: revision 1.10
sys/dev/ic/tpmreg.h: revision 1.11
sys/dev/ic/tpm.c: revision 1.21
sys/dev/ic/tpm.c: revision 1.22
sys/dev/ic/tpm.c: revision 1.23
sys/dev/ic/tpm.c: revision 1.24
sys/dev/ic/tpm.c: revision 1.25
sys/dev/ic/tpmreg.h: revision 1.7
sys/dev/ic/tpmreg.h: revision 1.8
sys/dev/ic/tpmreg.h: revision 1.9
sys/dev/ic/tpmvar.h: revision 1.8
sys/dev/ic/tpmvar.h: revision 1.9
dev/ic/tpm: Tidy up headers.
- Add include guards.
- Add necessary includes.
- Sort includes.
- Use _BYTE_ORDER, not BYTE_ORDER, for public header.
dev/ic/tpm: Add missing line break in attach output.
dev/ic/tpm: Take advantage of entropy source if available.
If the tpm is deactivated, though, detach the entropy source so we
don't continue to try polling it -- it can't be activated without a
reboot anyway.
Add note about enabling TPM and rnd(4) source.
tpm(4): Handle TPM 2.0 random source too, and loop on short reads.
Tested on ThinkPad T480.
tpm(4): Preserve error if any on ending commands.
This way we don't spuriously suppress an error, such as
TPM_DEACTIVATED, in a loop where we rely on it.
tpm@acpi: Require only one locality's worth of register space.
We don't actually use the registers for the other localities, and
some older TPMs only have the first locality exposed via ACPI.
tpm(4): Fix disabling of rnd source if tpm is deactivated.
Nothing prevents a second worker from being queued when the first one
is about to do rnd_detach_source. Instead, just set a flag so future
requests don't bother running a new thread; if there's a concurrent
one that's already been scheduled on another CPU, well, too bad, we
get a couple extra log messages but that's fine.
A better way to do this would probably be to detect whether the tpm
is deactivated at attach time, but that requires reading more of the
tpm spec than I care to do when there are alternative ways to
procrastinate like scrubbing the toilet.
tpm(4): Fix suspend and rework I/O transaction lock.
Use sc->sc_lock over individual I/O transactions, not open/close of
the whole device. This way there is a bounded time before the tpm is
unbusied even if userland is getting at it, so userland can't hold up
suspend indefinitely. Of course, the tpm might be suspended and
resumed in the middle of the user's session this way -- tough.
This limits the response buffer to 1024 bytes -- which is already a
bit hefty to have on the stack (but it's probably not very deep on
the stack from userland so maybe not a big deal). If it turns out we
need more, we can use kmem to allocate a buffer on the heap, with the
caveat that it might fail. This is necessary so that suspend doesn't
block indefinitely on uiomove in tpmread.
tpm(4): Nix TPM_BE16/TPM_BE32. Just use sys/endian.h.
|
| 1.4.2.1 |
| 16-Oct-2019 |
martin | Pull up following revision(s) (requested by maxv in ticket #336):
sys/dev/isa/tpm_isa.c: revision 1.6
sys/dev/ic/tpm.c: revision 1.16
sys/dev/isa/tpm_isa.c: revision 1.7
sys/dev/acpi/tpm_acpi.c: revision 1.10
sys/dev/acpi/tpm_acpi.c: revision 1.11
sys/dev/ic/tpmreg.h: revision 1.5
sys/dev/ic/tpmreg.h: revision 1.6
sys/dev/acpi/tpm_acpi.c: revision 1.9
sys/dev/ic/tpmvar.h: revision 1.5
sys/dev/ic/tpmvar.h: revision 1.6
sys/dev/ic/tpmvar.h: revision 1.7
sys/dev/ic/tpm.c: revision 1.14
share/man/man4/tpm.4: revision 1.5
sys/dev/isa/tpm_isa.c: revision 1.5
sys/dev/ic/tpm.c: revision 1.15
Improvements in tpm(4):
- Remove interrupt support, do polling only, avoids unnecessary trouble.
- Simplify a few things.
- Fix the suspend function, the SaveState command is 0x98, not 0x9C.
- Make the driver MP-safe.
- Sync the man page with reality.
-
Add suspend support for TPM 2.0 chips. Check the TPM response also for 1.2
chips. Unfortunately I cannot really test this change since ACPI suspend
does not work on any of my laptops.
-
Provide a better abstraction for the TPM interface. Report it in the ioctl.
|
| 1.7.8.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
