| History log of /src/sys/dev/pci/ixgbe/ixgbe_x550.h |
| Revision | | Date | Author | Comments |
| 1.7 |
| 24-Dec-2021 |
msaitoh | Update copyright to 2020.
FreeBSD: 8455e365f77f5b66ac9521dbcd690f79345ce147
|
| 1.6 |
| 30-Apr-2021 |
msaitoh | Add NetBSD RCS IDs. No functional change.
|
| 1.5 |
| 06-Dec-2018 |
msaitoh | branches: 1.5.4; 1.5.16;
Apply FreeBSD ix-3.3.6.tar.gz's change to NetBSD. Tested on C3000 and X550-T1,
but not tested on Xeon D:
- Add firmware recovery mode for X550, X550A(Xeon D) and X550EM (C3000):
- FreeBSD always set IXGBE_FEATURE_RECOVERY_MODE without checking the
NVM image version. We compare it against 2.0 to not to make new callout and
not to call extra atomic operations.
- In some FreeBSD's sysctl functions, atomic_load_acq_int() is called
before a null pointer check. We call it after null pointer check.
- Before calling atomic_load_acq_uint(), check adapter->feat_en flags
to save atomic operation call.
- We don't check recovery_mode in ixgbe_set_sysctl_value() because this
function doesn't touch any hardware register.
- NetBSD don't have FreeBSD's atomic_load_acq_int()-like function, so do it
with membar_sync(). Thanks riastradh@ for the advice.
- FreeBSD's ix-3.3.6 changed ixgbe_enable_aim from TRUE to FALSE, but we will
keep it as TRUE because we have already fixed some bugs.
- Remove IXGBE_DEV_ID_82599_LS(0x154f) support again. I don't know why. This
was added in ix-3.2.18.tar.gz(NetBSD: ixgbe_82599.c rev. 1.20) and removed in
ix-3.3.6.tar.gz.
- On X550EMU, use ixgbe_identify_sfp_module_X550em() instead of
ixgbe_identify_module_generic(). ixgbe_identify_sfp_module_X550em() has
extra check (e.g. exclude 1G copper).
- if_sriov.c's change doesn't affect to NetBSD because we don't support
SR-IOV PF function.
|
| 1.4 |
| 30-Mar-2018 |
msaitoh | branches: 1.4.2;
- Add missing IFM_NONE support. If a interface support linkdown,
"ifconfig ixgN media none" drpos link. Not all interface can do link down.
Tested:
82598 AT2 (T)
92599 SF+(SFI) (X520-DA2)
X540
X550-T1
X550EM_x (X10SDV-8C-TLN4F)
X550EM_a (A2SDi-H-TP4F port 0, 1 (T))
Doesn't work:
X550EM_a (A2SDi-H-TP4F port 2, 3 (SFP+ (KR)))
X550EM_a (MA10-ST0 port 2, 3 (SFP+ (SFI)))
(Denverton SFP+ can't force link down because SFP+'s TX_DISABLE pin is
pull down. Is there a way to shutdown SFP+ cage's power?)
Not tested:
82598 fiber.
- Change some functions static.
|
| 1.3 |
| 30-Aug-2017 |
msaitoh | branches: 1.3.2; 1.3.4;
- Sync with FreeBSD r320688 (and up to r322865):
- Add C3000(Denvertion(-NS)) support.
- Add bypass function support for bypass adapters. Sysctls are provided.
Not tested because I have no any bypass adapter.
- ixv(4): set RSS mapping.
- Change EEE sysctl.
- ixv(4): Add TSOv6.
- ixv(4): Mailbox API 1.2 and more are implemented and comment says it
negotiate with 1.2 but it really does 1.1...
- Remove thermal test sysctl.
- Fix unknown bugs.
- Print driver feature capabilities and enable bits when verbose boot.
|
| 1.2 |
| 02-Dec-2016 |
msaitoh | branches: 1.2.2; 1.2.4; 1.2.12;
Update ixg(4) and ixv(4) up to FreeBSD r292674:
- Add X552 SFP+ and X550T single port.
- Bug fixes.
|
| 1.1 |
| 01-Dec-2016 |
msaitoh | Add forgotten ixgbe_x550.c and ixgbe_x550.h.
|
| 1.2.12.5 |
| 30-Jan-2022 |
martin | Pull up the following, requested by msaitoh in ticket #1729:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.2.12.4 |
| 15-Sep-2021 |
martin | Pull up the following (all via patch), requested by msaitoh in ticket #1696:
sysdev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sysdev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sysdev/pci/ixgbe/ix_txrx.c 1.68-1.93
sysdev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sysdev/pci/ixgbe/if_bypass.c 1.7-1.9
sysdev/pci/ixgbe/if_fdir.c 1.4-1.5
sysdev/pci/ixgbe/if_sriov.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_82598.c 1.16
sysdev/pci/ixgbe/ixgbe_82599.c 1.23
sysdev/pci/ixgbe/ixgbe_api.c 1.25
sysdev/pci/ixgbe/ixgbe_bypass.h 1.2
sysdev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sysdev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_dcb.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sysdev/pci/ixgbe/ixgbe_fdir.h 1.3
sysdev/pci/ixgbe/ixgbe_features.h 1.3
sysdev/pci/ixgbe/ixgbe_mbx.c 1.12
sysdev/pci/ixgbe/ixgbe_netbsd.c 1.16-1.17
sysdev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sysdev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sysdev/pci/ixgbe/ixgbe_netmap.h 1.2
sysdev/pci/ixgbe/ixgbe_osdep.c 1.7
sysdev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sysdev/pci/ixgbe/ixgbe_phy.c 1.24
sysdev/pci/ixgbe/ixgbe_rss.h 1.5
sysdev/pci/ixgbe/ixgbe_sriov.h 1.4
sysdev/pci/ixgbe/ixgbe_type.h 1.49
sysdev/pci/ixgbe/ixgbe_vf.c 1.27
sysdev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sysdev/pci/ixgbe/ixgbe_x540.h 1.9
sysdev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sysdev/pci/ixgbe/ixgbe_x550.h 1.6
sysdev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.2.12.3 |
| 22-Jul-2019 |
martin | Pull up the following revisions (via patch), requested by msaitoh in
ticket #1301:
sys/dev/pci/ixgbe/if_sriov.c 1.5-1.6
sys/dev/pci/ixgbe/ix_txrx.c 1.53-1.54
sys/dev/pci/ixgbe/ixgbe_x550.h 1.5
sys/dev/pci/ixgbe/ixgbe.c 1.169-1.170,1.176,1.179,1.181,1.185-1.186,1.188-1.192 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.53,1.55
sys/dev/pci/ixgbe/ixgbe_82599.c 1.21
sys/dev/pci/ixgbe/ixgbe_api.c 1.22-1.23
sys/dev/pci/ixgbe/ixgbe_api.h 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_common.c 1.23
sys/dev/pci/ixgbe/ixgbe_common.h 1.14
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.11
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.2
sys/dev/pci/ixgbe/ixgbe_features.h 1.2
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.9
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.9-1.10
sys/dev/pci/ixgbe/ixgbe_phy.c 1.18
sys/dev/pci/ixgbe/ixgbe_type.h 1.37,1.39-1.40
sys/dev/pci/ixgbe/ixgbe_vf.c 1.18
sys/dev/pci/ixgbe/ixv.c 1.112-1.114,1.117,1.119 via patch
Sync ixgbe up to 20190717 except ETHERCAP or ixv's VLAN stuff:
- Add firmware recovery mode for X550, X550A(Xeon D) and X550EM(C3000).
- Remove IXGBE_DEV_ID_82599_LS(0x154f) support again.
- On X550EMU, use ixgbe_identify_sfp_module_X550em() instead of
ixgbe_identify_module_generic(). ixgbe_identify_sfp_module_X550em()
has extra check (e.g. exclude 1G copper).
- It's not required to calculate unused queues' statistics.
- Remove ETHERCAP_VLAN_HWFILTER's definition.
- Match 82598_BX(0x1508), 82599_KR(0x1517), 82599_SFP_EM(0x1507),
X550EM_X_XFI(0x15b0), X550EM_A_QSFP(0x15ca) and
X550EM_A_QSFP_N(0x15cc)
- Add missing XFI support into ixgbe_get_link_capabilities_X550em().
- Other than IXGBE_VF_RESET should wait ACK, so use
ixgbevf_write_msg_read_ack() instead of write_posted() in
ixgbe_update_mc_addr_list_vf().
- When ixv_check_link() failed in the watchdog function, reset the
interface.
- Remove RXCSUM register modification in
ixv_initialize_receive_units(). It seems it's not required.
- Remove some debug printf in ixv_print_debug_info().
- Calculate vector's bit location correctly when the vector >= 31
in ixgbe_allocate_msix().
- Fix hung queue check when the queue number >= 31.
- On ENETRESET case, not continue and quit the ifflags_cb() function
because if_init() will do the same thing.
- Fix bugs in unused code.
- Fix typo in comment.
- Fix typo in unused code.
- Whitespace fixes. KNF.
|
| 1.2.12.2 |
| 04-Apr-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #690):
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe.c: revision 1.138
sys/dev/pci/ixgbe/ixv.c: revision 1.90
sys/dev/pci/ixgbe/ixgbe.c: revision 1.139
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.11
sys/dev/pci/ixgbe/ixgbe.h: revision 1.38
sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.12
sys/dev/pci/ixgbe/ixgbe.h: revision 1.39
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.11
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.37
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.38
sys/dev/pci/ixgbe/ixgbe.c: revision 1.140
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe.c: revision 1.141
sys/dev/pci/ixgbe/ixgbe.c: revision 1.142
sys/dev/pci/ixgbe/ixgbe.c: revision 1.143
sys/dev/pci/ixgbe/ixgbe.h: revision 1.40
sys/dev/pci/ixgbe/ixgbe_x550.h: revision 1.4
Fix the problem between eitr and link_speed.
In ixgbe_msix_que(), que->eitr_setting is limited to IXGBE_MIN_RSC_EITR_10G1G
when link_speed is 1Gbps or 10Gbps. However, que->eitr_setting is set to EITR
register in the *next* Tx/Rx interrupt. If link_speed changes from 100Mbps to
1Gbps ro 10Gbps, que->eitr_setting which is not limited can be set to EITR
register, that is, the problem fixed by ixgbe.c:r1.124 can occur in this case.
To fix this case, que->eitr_setting should be clear when link_speed is changed
or link state is changed.
Furthermore, expand the variants used for AIM (txr->bytes, txr->packets,
rxr->bytes and rxr->packets) from u32 to u64 to avoid wraparound which causes
que->eitr_setting calculation mistake.
XXX pullup-8
Don't write EIMC directly. It is required to manage with struct ix_queue status.
XXX pullup-8
- Add missing IFM_NONE support. If a interface support linkdown,
"ifconfig ixgN media none" drpos link. Not all interface can do link down.
Tested:
82598 AT2 (T)
92599 SF+(SFI) (X520-DA2)
X540
X550-T1
X550EM_x (X10SDV-8C-TLN4F)
X550EM_a (A2SDi-H-TP4F port 0, 1 (T))
Doesn't work:
X550EM_a (A2SDi-H-TP4F port 2, 3 (SFP+ (KR)))
X550EM_a (MA10-ST0 port 2, 3 (SFP+ (SFI)))
(Denverton SFP+ can't force link down because SFP+'s TX_DISABLE pin is
pull down. Is there a way to shutdown SFP+ cage's power?)
Not tested:
82598 fiber.
- Change some functions static.
Avoid issues caused by sending old packets at next link-up time.
This modification consists by the following two parts.
- drain packets in if_snd queue or corresponding txr->txr_interq
when link_active == false in ifp->if_start(), ifp->if_transmit(),
and deferred Tx processing
- drain packets in if_snd queue and all of txr->txr_interq's
at link-down time
ok by msaitoh@n.o.
Fix long standing bug that 82598 SFP+ panics in ixgbe_handle_mod() because
hw->mac.ops.setup_sfp is NULL. This change is a part of FreeBSD r327031.
Fix a bug that "ifconfig ixgN down up" forgot IFM_NONE setting.
- Don't assume autoneg == 0 is the first call of ixgbe_config_link().
Check ifm_media, too.
- Don't override autoneg_advertised in ixgbe_get_phy_id_fw() to not to
be inconsistent with if_media value.
|
| 1.2.12.1 |
| 21-Dec-2017 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #441):
sys/dev/pci/files.pci: 1.390
sys/dev/pci/ixgbe/if_bypass.c: new
sys/dev/pci/ixgbe/if_fdir.c: new
sys/dev/pci/ixgbe/if_sriov.c: new
sys/dev/pci/ixgbe/ixgbe_bypass.h: new
sys/dev/pci/ixgbe/ixgbe_fdir.h: new
sys/dev/pci/ixgbe/ixgbe_features.h: new
sys/dev/pci/ixgbe/ixgbe_netmap.c: new
sys/dev/pci/ixgbe/ixgbe_netmap.h: new
sys/dev/pci/ixgbe/ixgbe_rss.h: new
sys/dev/pci/ixgbe/ixgbe_sriov.h: new
sys/dev/pci/ixgbe/ix_txrx.c: 1.28, 1.30 via patch
sys/dev/pci/ixgbe/ixgbe.c: 1.97-1.105, 1.107-1.111, 1.113-1.115
sys/dev/pci/ixgbe/ixgbe.h: 1.26-1.29 via patch
sys/dev/pci/ixgbe/ixv.c: 1.57-1.58, 1.60-1.61, 1.63-1.64, 1.66-1.72, 1.75 via patch
sys/dev/pci/ixgbe/ixgbe_api.c: 1.17-1.18 via patch
sys/dev/pci/ixgbe/ixgbe_type.h: 1.26-1.30 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_82598.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: 1.15-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_82599.h: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_api.h: 1.10-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_common.c: 1.14-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_common.h: 1.8-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_mbx.c: 1.7-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.h: 1.11-1.12 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.c: 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.18-1.19 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c: 1.12-1.14 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c: 1.13-1.15 via patch
sys/dev/pci/ixgbe/ixgbe_vf.h: 1.9-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_x540.c: 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_x540.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.c: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.h: 1.3
Sync with FreeBSD's up to r326022, fix bugs and some improvements:
- Don't limit number of queue pair to 8. Take chip's max TX queues and
max RX queues into account.
- Add C3000 (Denverton) support.
- Add bypass function support for bypass adapters.
- Change EEE sysctl.
- Remove thermal test sysctl.
- ixv(4): set RSS mapping.
- ixv(4): Add TSOv6.
- ixv(4): Fix hardware counter.
- ixv(4): Make TX/RX descriptors size the same as ixg(4).
- ixv(4): Print device name in ixv_attach().
- ixv(4): Make mailbox statistic counters evcnt(9).
- ixv(4): Fix a problem that mailbox interrupt never occurred.
- ixv(4): Don't check neither VTEICR nor VTEICS same as Linux. It
seems that both registers can't be used to check which MSI-X vector
is triggered.
- ixv(4): Print Mailbox API version.
- Print driver feature capabilities and enable bits when verbose boot.
- Fix a bug that X550EM_A (Denverton) can't force 10BaseT.
- Remove all half-duplex setting because of the chip specification.
- Add 2.5GBASE-T and 5GBASE-T support.
- Set ifm_baudrate correctly.
- Protect ec_multi* with mutex like other MP safe Ethernet drivers.
- On X550 and newer, print NVM Image Version with %u.%02x.
- On X540, print PHY FW Revision with %u.%x. 0x4030 will be printed
as "Revision 4.3 ID 0x0"
- Fix value check of OEM_NVM_IMAGE_VER.
- Print PHY ID only for copper PHY.
- Fix a bug that X550 and newer didn't linkup if it forces
100BaseTX-FDX or 10BaseT-FDX.
- Fix a bug that RX may accesses freed area. It also fixes a problem
that if_init() takes long time on many core machine.
- Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This
change has no influence to netbsd because it's enabled by default
and NetBSD has no API to disable it.
- Whitespace fix.
|
| 1.2.4.2 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.2.4.1 |
| 02-Dec-2016 |
pgoyette | file ixgbe_x550.h was added on branch pgoyette-localcount on 2017-01-07 08:56:40 +0000
|
| 1.2.2.2 |
| 05-Dec-2016 |
skrll | Sync with HEAD
|
| 1.2.2.1 |
| 02-Dec-2016 |
skrll | file ixgbe_x550.h was added on branch nick-nhusb on 2016-12-05 10:55:17 +0000
|
| 1.3.4.2 |
| 26-Dec-2018 |
pgoyette | Sync with HEAD, resolve a few conflicts
|
| 1.3.4.1 |
| 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.3.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.3.2.1 |
| 30-Aug-2017 |
jdolecek | file ixgbe_x550.h was added on branch tls-maxphys on 2017-12-03 11:37:30 +0000
|
| 1.4.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.5.16.1 |
| 13-May-2021 |
thorpej | Sync with HEAD.
|
| 1.5.4.2 |
| 30-Jan-2022 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1414:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.5.4.1 |
| 15-Sep-2021 |
martin | Pull up the following (via patch), requested by msaitoh in ticket #1346:
sys/dev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.68-1.93
sys/dev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sys/dev/pci/ixgbe/if_bypass.c 1.7-1.9
sys/dev/pci/ixgbe/if_fdir.c 1.4-1.5
sys/dev/pci/ixgbe/if_sriov.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_82598.c 1.16
sys/dev/pci/ixgbe/ixgbe_82599.c 1.23
sys/dev/pci/ixgbe/ixgbe_api.c 1.25
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.2
sys/dev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.3
sys/dev/pci/ixgbe/ixgbe_features.h 1.3
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.12
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.13, 1.16-1.17
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sys/dev/pci/ixgbe/ixgbe_netmap.h 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.7
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sys/dev/pci/ixgbe/ixgbe_phy.c 1.24
sys/dev/pci/ixgbe/ixgbe_rss.h 1.5
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.4
sys/dev/pci/ixgbe/ixgbe_type.h 1.49
sys/dev/pci/ixgbe/ixgbe_vf.c 1.27
sys/dev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sys/dev/pci/ixgbe/ixgbe_x540.h 1.9
sys/dev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sys/dev/pci/ixgbe/ixgbe_x550.h 1.6
sys/dev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
