| 1.2.4.2 |
| 25-Feb-2020 |
martin | Pull up following revision(s) (requested by mrg in ticket #717):
sys/dev/fdt/dwcmmc_fdt.c 1.11
sys/dev/ic/bwfm.c 1.15-1.18
sys/dev/ic/bwfmreg.h 1.4-1.6
sys/dev/ic/bwfmvar.h 1.4,1.5
sys/dev/ic/dwc_mmc.c 1.21,1.22
sys/dev/ic/dwc_mmc_reg.h 1.8,1.9,1.12,1.13
sys/dev/pcmcia/pcmciareg.h 1.11
sys/dev/sdmmc/if_bwfm_sdio.c 1.4,1.6-1.12
sys/dev/sdmmc/if_bwfm_sdio.h 1.1,1.2
sys/dev/sdmmc/sdhc.c 1.105,1.106
sys/dev/sdmmc/sdmmc.c 1.37,1.39
sys/dev/sdmmc/sdmmc_cis.c 1.6,1.8
sys/dev/sdmmc/sdmmc_io.c 1.15-1.19
sys/dev/sdmmc/sdmmc_ioreg.h 1.4,1.5
sys/dev/sdmmc/sdmmc_mem.c 1.69-1.71
sys/dev/sdmmc/sdmmcdevs 1.5-1.8
sys/dev/sdmmc/sdmmcvar.h 1.31,1.33,1.34
sys/net/if_media.h 1.66
Add Broadcom devices
-
Fix typo
-
add PCMCIA_CISTPL_SDIO definition.
-
From OpenBSD:
- move event handling to workqueue
- check for save/restore capability
-
Tag work queue as MPsafe and increase length.
-
Juse use bpf_mtap(), the 802.11 encapsulation is handled by firmware.
-
From OpenBSD:
- support block length per function
- add functions to read/write regions
-
Decode (but not use) SDIO tuple in CIS.
-
Fix locking.
-
Add more SDIO defines (partially from version 3.0).
-
From OpenBSD:
- All the missing pieces (firmware load, chip setup, protocol handling)
TX queue and interrupt handling via sdmmc_task.
-
Fix locking.
-
Fix packet parsing.
-
Add parser for original firmware config files.
-
tagging work queue as MPSAFE was premature. Revert.
-
SD_IO_RW_EXTENDED is a data transfer command, so set ADTC flag instead of AC
Use correct function to verify if a task has been queued. Avoids race
that can corrupt the task queue.
-
More register definitions.
-
Add IFM_IEEE80211_VHT subtype, IFM_IEEE80211_11AC operating mode, and missing descriptions
-
If firmware is connected in HT or VHT mode, report it to SIOCGIFMEDIA
-
white space police.
Skip setting power when the voltage doesn't change.
Also increase some timeouts.
-
Add and use sdmmc_pause to avoid long-term busy waits.
-
Add sdio abort function.
-
Additional error messages.
-
Print parameters for SDIO devices.
-
Minor cosmetics.
-
Simplyfy sdmmc_io_set_blocklen function signature by dropping the
extra softc pointer. Aligns with OpenBSD.
-
Missing commit for sdio abort function.
-
More code from OpenBSD
-
no need to splnet() when enqueing packets
-
explicit structure padding
-
make internal functions static
-
also prepare for GPIO interrupts.
-
Avoid warnings for tautological shifts as sole conditional.
-
Follow the Linux driver an use the FDT "compatible" property to build a
filename for the nvram config file, fall back to the standard filename.
E.g.
[Caching 123 nodes and 1093 properties]
compatible 73696e6f 766f6970 2c627069 2d6d322d "sinovoip,bpi-m2-
0010: 7a65726f 00...... ........ ........ zero"
0015: 616c6c77 696e6e65 722c7375 6e38692d "allwinner,sun8i-
0025: 68322d70 6c757300 ........ ........ h2-plus"
interrupt-parent 00000001 ........ ........ ........ ....
model 42616e61 6e612050 69204250 492d4d32 "Banana Pi BPI-M2
0010: 2d5a6572 6f00.... ........ ........ -Zero"
name 00...... ........ ........ ........ ""
serial-number 30326330 30303432 65636431 36376566 02c00042ecd167ef
0010: 00...... ........ ........ ........ .
-rw-r--r-- 1 root wheel 875 Nov 2 12:06 brcmfmac43430-sdio.AP6212.txt
lrwxr-xr-x 1 root wheel 29 Dec 30 16:19 brcmfmac43430-sdio.sinovoip,bpi-m2-zero.txt -> brcmfmac43430-sdio.AP6212.txt
-rw-r--r-- 1 root wheel 874 Jun 30 2019 brcmfmac43430-sdio.raspberrypi,3-model-b.txt
-rw-r--r-- 1 root wheel 1864 Jun 30 2019 brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
lrwxr-xr-x 1 root wheel 29 Dec 30 11:24 brcmfmac43455-sdio.raspberrypi,4-model-b-plus.txt -> brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
-
Add product ID for Broadcom BCM43455
-
Use correct firmware for BCM43456
-
size check was backwards.
-
Be less noisy for some commands.
-
Fix DWC_MMC_INT_SDIO_INT bit
-
dwc_mmc fixes:
- Rockchip uses a different SDIO int bit, so take this into consideration
- Avoid unnecessary resets and always wait for resets to complete
- kpause instead of delay while holding spinlock
- Do not attempt autostop for SD_IO_RW_EXTENDED commands
- Allow for sub-blklen byte counts for single block transfers
-
More SDIO stability and performance fixes
|
