| History log of /src/sys/external/bsd/acpica/dist/compiler/dttable2.c |
| Revision | | Date | Author | Comments |
| 1.1 |
| 09-Jan-2016 |
christos | branches: 1.1.1;
Initial revision
|
| 1.1.1.20 |
| 24-Aug-2025 |
christos | Import 20250807 (previous was 20241212)
|
| 1.1.1.19 |
| 24-Feb-2025 |
christos | Import new acpica-2024-12-12; previous one was 2024-08-27
|
| 1.1.1.18 |
| 13-Sep-2024 |
christos | Import acpica-20240827 (previous was acpica-20230628)
|
| 1.1.1.17 |
| 01-Sep-2023 |
christos | branches: 1.1.1.17.6;
Import acpica-20230628 (last was 20221020)
|
| 1.1.1.16 |
| 10-Dec-2022 |
christos | Import acpica 2022-10-20
20 October 2022. Summary of changes for version 20221020:
This release is available at https://acpica.org/downloads
0) Global changes:
Allow disabling of -Werror. For distro maintainers having `-Werror`
can delay update of GCC. Since every GCC release might add new
warnings that were not yet captured, it might break the build of
packages. With this change, distros can now build with `NOWERROR=TRUE`
instead of patching either the errors or the makefiles. The default
behavior keeps on using `-Werror`.
1) ACPICA kernel-resident subsystem:
Added support for FFH Operation Region special context data.
FFH(Fixed Function Hardware) Opregion is approved to be added in
ACPI 6.5 via code first approach[1]. It requires special context
data similar to GPIO and Generic Serial Bus as it needs to know
platform specific offset and length.
Reverted this commit "executer/exsystem: Warn about sleeps greater
than 10 ms." Due to user complaints about valid sleeps greater than
10ms seen in some existing machines -- generating lots of warnings.
Do not touch VGA memory when EBDA < 1KiB. The ACPICA code assumes
that EBDA region must be at least 1KiB in size. Because this is
not guaranteed, it might happen that while scanning the memory for
RSDP pointer, the kernel touches memory above 640KiB. This is
unwanted as the VGA memory range may not be decoded or even present
when running under virtualization.
Check that EBDA pointer is in valid memory. If the memory at 0x40e
is uninitialized, the retrieved physical memory address of EBDA
may be beyond the low memory (i.e. above 640K). If so, the kernel
may unintentionally access the VGA memory, that might not be decoded
or even present in case of virtualization.
2) iASL Compiler/Disassembler and ACPICA tools:
Completed the existing partial support for the CDAT "table". Although
this isn't technically an ACPI table (It doesn't go into the XSDT),
it is possible to support this table in the Data Table compiler.
Created one new file, "utilities/utcksum.c", used to centralize
checksum generation/validation into one location. Includes changes
to makefiles and MSVC project files.
Updated support for the IORT table - update to version E.e
Added CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
iASL: Added CCEL table to both compiler/disassembler.
iASL: NHLT table: Fixed compilation of optional undocumented fields
iASL: Fix iASL compile error due to ACPI_TDEL_OFFSET. Commit #
10e4763 ("iASL: Add CCEL table to both compiler/disassembler")
introduced the iASL build issue. The issue is due to using
ACPI_TDEL_OFFSET for CCEL table member reference. To fix it, change
ACPI_TDEL_OFFSET with ACPI_CCEL_OFFSET.
|
| 1.1.1.15 |
| 27-Aug-2022 |
christos | Import acpica-2022-03-31
|
| 1.1.1.14 |
| 18-Dec-2021 |
christos | Import acpica-20211217
17 December 2021. Summary of changes for version 20211217:
This release is available at https://acpica.org/downloads
1) ACPICA kernel-resident subsystem:
Hardware: Do not flush CPU cache when entering S4 and S5. According
to ACPI 6.4, Section 16.2, the CPU cache flushing is required on
entering to S1, S2, and S3, but the ACPICA code flushes the CPU
cache regardless of the sleep state. Blind cache flush on entering
S5 causes problems for TDX.
Avoid subobject buffer overflow when validating RSDP signature.
Since the Signature member is accessed through an ACPI_TABLE_HEADER,
the pointer to it is only to a 4-char array, and so trying to read
past the 4th character, as will be done when it is an RSDP, reads
beyond the bounds of the accessed member. Contributed by jrtc27.
Add support for PCC Opregion special context data. PCC Opregion
added in ACPIC 6.3 requires special context data similar to GPIO
and Generic Serial Bus as it needs to know the internal PCC buffer
and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM. Adds support for the special
context data needed by PCC Opregion. Submitted by Sudeep Holla
2) iASL Compiler/Disassembler and ACPICA tools:
iASL: Completed compiler support for the NHLT ACPI table.
iASL/NHLT table: Fixed a reported problem where a fault would occur
during disassembly of a "Linux-Specific" section if the "Specific
Data" part was not present.
iASL: Added full support (compiler and disassembler) for the AGDI
ACPI table. Contributed by: Ilkka Koskinen .
iASL: Added full support for the TDEL ACPI table.
iASL table compiler: FADT support updates:
1) Allow the 32-bit DSDT address to be zero.
2) Issue error if both the 32-bit and 64-bit DSDT addresses are zero.
iASL: Fix unaligned accesses to local cache allocations. Contributed
by jrtc27.
iASL: Open binary input files in binary mode, not text mode Affects
binary input AML files, as well as binary data table files, for
disassembly.
|
| 1.1.1.13 |
| 28-Oct-2021 |
christos | 30 September 2021. Summary of changes for version 20210930:
This release is available at https://acpica.org/downloads
1) ACPICA kernel-resident subsystem:
Hardware: Avoid evaluating methods too early during system resume.
During wakeup from system-wide sleep states, AcpiGetSleepTypeData()
is called and it tries to get memory from the OS in order to evaluate
a control method, but if KFENCE is enabled in the Linux kernel,
the memory allocation attempt causes an IRQ work to be queued and
a self-IPI to be sent to the CPU running the code which requires
the memory controller to be ready, so if that happens too early in
the wakeup path, it doesn't work.
Prevent that from taking place by calling AcpiGetSleepTypeData()
for S0 upfront, when preparing to enter a given sleep state, and
saving the data obtained by it for later use during system wakeup.
Added a new _OSI string, "Windows 2020". Posted by superm1.
2) iASL Compiler/Disassembler and ACPICA tools:
iASL compiler: Updated the check for usage of _CRS, _DIS, _PRS, and _SRS objects:
New/latest rules: Under a Device Object:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS
and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
iASL table disassembler: Added disassembly support for the NHLT
ACPI table. Note: support for Vendor-defined microphone arrays and
SNR extensions are not supported at this time -- mostly due to a
lack of example tables. Actual compiler support for NHLT is
forthcoming.
Added a new subtable type for ACPI 6.4 SRAT Generic Port Affinity.
It uses the same subtable structure as the existing Generic Initiator
Affinity type.
Added the flag for online capable in the MADT, introduced in ACPI
6.3. Posted by superm1.
3) ACPICA documentation: Updated the legal info (that appears at
the start of the Documents) to clarify distribution rights that
are granted.
30 July 2021. Summary of changes for version 20210730:
This release is available at https://acpica.org/downloads
1) ACPICA kernel-resident subsystem:
2) iASL Compiler/Disassembler and ACPICA tools:
iasl: Check usage of _CRS, _DIS, _PRS, and _SRS objects (July 2021).
Under the Device Object:
1) If _DIS is present, must have a _CRS and _SRS
2) If _PRS is present, must have a _CRS, _DIS, and _SRS
3) If _SRS is present, must have a _CRS and _DIS
A warning will be issued for each of these cases.
Note: For existing ASL/projects, these warnings may be disabled by
specifying this on the command line:
"-vw 3141"
iASL Table Disassembler/Table compiler: Fix for WPBT table with no
command-line arguments. Handle the case where the Command-line
Arguments table field does not exist (zero).
Headers: Add new DBG2 Serial Port Subtypes
The Microsoft Debug Port Table 2 (DBG2) specification revision
September 21, 2020 comprises additional Serial Port Subtypes [1].
Reflect that in the actbl1.h header file. Submitted by:
semihalf-wojtas-marcin
iASL: Add full support for the AEST table (data compiler)
Includes support in the table compiler and the disassembler.
Add PRMT module header to facilitate parsing.
This structure is used in to parse PRMT in other Operating Systems
that relies on using subtable headers in order to parse ACPI tables.
Although the PRMT doesn't have "subtables" it has a list of module
information structures that act as subtables.
iASL: Table disassembler: Add missing strings to decode subtable types.
Includes the MADT and CEDT tables.
|
| 1.1.1.12 |
| 06-Jul-2021 |
christos | Import acpica-20210604
|
| 1.1.1.11 |
| 03-Apr-2021 |
christos | branches: 1.1.1.11.2;
31 March 2021. Summary of changes for version 20210331:
This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support
1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.
2) iASL Compiler/Disassembler and ACPICA tools:
ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.
iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.
|
| 1.1.1.10 |
| 28-Mar-2020 |
christos | branches: 1.1.1.10.4; 1.1.1.10.6;
|
| 1.1.1.9 |
| 14-Dec-2019 |
christos |
|
| 1.1.1.8 |
| 29-Apr-2019 |
christos |
|
| 1.1.1.7 |
| 05-Jan-2019 |
christos | 13 December 2018. Summary of changes for version 20181213:
1) ACPICA Kernel-resident Subsystem:
Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede
Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000
Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST
Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"
Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"
Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).
2) iASL Compiler/Disassembler and Tools:
iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.
AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.
Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.
AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".
|
| 1.1.1.6 |
| 07-Apr-2018 |
christos | branches: 1.1.1.6.2;
|
| 1.1.1.5 |
| 12-Nov-2017 |
christos | branches: 1.1.1.5.2; 1.1.1.5.4;
|
| 1.1.1.4 |
| 15-Sep-2017 |
christos |
|
| 1.1.1.3 |
| 25-Jan-2017 |
christos | One more time in the right place...
|
| 1.1.1.2 |
| 04-May-2016 |
christos | branches: 1.1.1.2.2; 1.1.1.2.4;
22 April 2016. Summary of changes for version 20160422:
1) ACPICA kernel-resident subsystem:
Fixed a regression in the GAS (generic address structure) arbitrary bit
support in AcpiHwRead/AcpiHwWrite. Problem could cause incorrect behavior
and incorrect return values. Lv Zheng. ACPICA BZ 1270.
ACPI 6.0: Added support for new/renamed resource macros. One new argument
was added to each of these macros, and the original name has been
deprecated. The AML disassembler will always disassemble to the new
names. Support for the new macros was added to iASL, disassembler,
resource manager, and the acpihelp utility. ACPICA BZ 1274.
I2cSerialBus -> I2cSerialBusV2
SpiSerialBus -> SpiSerialBusV2
UartSerialBus -> UartSerialBusV2
ACPI 6.0: Added support for a new integer field that was appended to the
package object returned by the _BIX method. This adds iASL compile-time
and AML runtime error checking. ACPICA BZ 1273.
ACPI 6.1: Added support for a new PCCT subtable, "HW-Reduced Comm
Subspace Type2" (Headers, Disassembler, and data table compiler).
Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.
Current Release:
Non-Debug Version: 137.4K Code, 52.6K Data, 190.0K Total
Debug Version: 201.5K Code, 82.2K Data, 283.7K Total
Previous Release:
Non-Debug Version: 137.1K Code, 51.5K Data, 188.6K Total
Debug Version: 201.0K Code, 82.0K Data, 283.0K Total
2) iASL Compiler/Disassembler and Tools:
iASL: Implemented an ASL grammar extension to allow/enable executable
"module-level code" to be created and executed under the various
operators that create new scopes. This type of AML code is already
supported in all known AML interpreters, and the grammar change will
appear in the next version of the ACPI specification. Simplifies the
conditional runtime creation of named objects under these object types:
Device
PowerResource
Processor
Scope
ThermalZone
iASL: Implemented a new ASL extension, a "For" loop macro to add greater
ease-of-use to the ASL language. The syntax is similar to the
corresponding C operator, and is implemented with the existing AML While
opcode -- thus requiring no changes to existing AML interpreters.
For (Initialize, Predicate, Update) {TermList}
Grammar:
ForTerm :=
For (
Initializer // Nothing | TermArg => ComputationalData
Predicate // Nothing | TermArg => ComputationalData
Update // Nothing | TermArg => ComputationalData
) {TermList}
iASL: The _HID/_ADR detection and validation has been enhanced to search
under conditionals in order to allow these objects to be conditionally
created at runtime.
iASL: Fixed several issues with the constant folding feature. The
improvement allows better detection and resolution of statements that can
be folded at compile time. ACPICA BZ 1266.
iASL/Disassembler: Fixed a couple issues with the Else{If{}...}
conversion to the ASL ElseIf operator where incorrect ASL code could be
generated.
iASL/Disassembler: Fixed a problem with the ASL+ code disassembly where
sometimes an extra (and extraneous) set of parentheses were emitted for
some combinations of operators. Although this did not cause any problems
with recompilation of the disassembled code, it made the code more
difficult to read. David Box. ACPICA BZ 1231.
iASL: Changed to ignore the unreferenced detection for predefined names
of resource descriptor elements, when the resource descriptor is
created/defined within a control method.
iASL: Disassembler: Fix a possible fault with externally declared Buffer
objects.
|
| 1.1.1.1 |
| 09-Jan-2016 |
christos | branches: 1.1.1.1.2;
import new acpica:
|
| 1.1.1.17.6.1 |
| 02-Aug-2025 |
perseant | Sync with HEAD
|
| 1.1.1.11.2.1 |
| 01-Aug-2021 |
thorpej | Sync with HEAD.
|
| 1.1.1.10.6.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
| 1.1.1.10.4.1 |
| 03-Apr-2021 |
thorpej | Sync with HEAD.
|
| 1.1.1.6.2.2 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.1.1.6.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.1.1.5.4.2 |
| 18-Jan-2019 |
pgoyette | Synch with HEAD
|
| 1.1.1.5.4.1 |
| 16-Apr-2018 |
pgoyette | Sync with HEAD, resolve some conflicts
|
| 1.1.1.5.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.1.1.5.2.1 |
| 12-Nov-2017 |
jdolecek | file dttable2.c was added on branch tls-maxphys on 2017-12-03 11:37:39 +0000
|
| 1.1.1.2.4.1 |
| 21-Apr-2017 |
bouyer | Sync with HEAD
|
| 1.1.1.2.2.1 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
| 1.1.1.1.2.4 |
| 05-Feb-2017 |
skrll | Sync with HEAD
|
| 1.1.1.1.2.3 |
| 29-May-2016 |
skrll | Sync with HEAD
|
| 1.1.1.1.2.2 |
| 19-Mar-2016 |
skrll | Sync with HEAD
|
| 1.1.1.1.2.1 |
| 09-Jan-2016 |
skrll | file dttable2.c was added on branch nick-nhusb on 2016-03-19 11:30:22 +0000
|
