Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.14.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.11.4; 1.1.1.11.6;

branches: 1.1.1.9.2;

branches: 1.1.1.8.2;

One more time in the right place...

branches: 1.1.1.6.2; 1.1.1.6.4;
import new acpica:

branches: 1.1.1.3.2;

import new acpica

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8; 1.1.1.1.10; 1.1.1.1.20; 1.1.1.1.24;
Import 20110211.

merge our changes into 20250807

merge conflicts between 2024-08-27 and 2024-12-12

branches: 1.16.6;
merge conflicts between 20230628 and 20221020

merge conflicts between acpica-20211217 and acpica-20220331

Merge local changes with acpica-20210331

branches: 1.13.4; 1.13.6;
merge conflicts

merge conflicts

merge conflicts

branches: 1.10.2;
Merge conflicts; STA methods and fields are not present anymore.

branches: 1.9.2;
merge conflicts

merge conflicts

branches: 1.7.4;
merge conflicts

branches: 1.6.2; 1.6.4;
merge new acpica

resolve conflicts.

branches: 1.4.2;
merge conflicts

resolve conflicts

branches: 1.2.2; 1.2.4; 1.2.8; 1.2.10; 1.2.20; 1.2.24;
__UNCONST(3).

branches: 1.1.1;
Initial revision

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.11.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.8.4; 1.1.1.8.6;

branches: 1.1.1.5.2;

branches: 1.1.1.4.2; 1.1.1.4.4;

One more time in the right place...

branches: 1.1.1.2.2; 1.1.1.2.4;
import new acpica:

branches: 1.1.1.1.2;

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.20.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

30 September 2021. Summary of changes for version 20210930:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

Hardware: Avoid evaluating methods too early during system resume.
During wakeup from system-wide sleep states, AcpiGetSleepTypeData()
is called and it tries to get memory from the OS in order to evaluate
a control method, but if KFENCE is enabled in the Linux kernel,
the memory allocation attempt causes an IRQ work to be queued and
a self-IPI to be sent to the CPU running the code which requires
the memory controller to be ready, so if that happens too early in
the wakeup path, it doesn't work.

Prevent that from taking place by calling AcpiGetSleepTypeData()
for S0 upfront, when preparing to enter a given sleep state, and
saving the data obtained by it for later use during system wakeup.

Added a new _OSI string, "Windows 2020". Posted by superm1.

2) iASL Compiler/Disassembler and ACPICA tools:

iASL compiler: Updated the check for usage of _CRS, _DIS, _PRS, and _SRS objects:
New/latest rules: Under a Device Object:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS
and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)

iASL table disassembler: Added disassembly support for the NHLT
ACPI table. Note: support for Vendor-defined microphone arrays and
SNR extensions are not supported at this time -- mostly due to a
lack of example tables. Actual compiler support for NHLT is
forthcoming.

Added a new subtable type for ACPI 6.4 SRAT Generic Port Affinity.
It uses the same subtable structure as the existing Generic Initiator
Affinity type.

Added the flag for online capable in the MADT, introduced in ACPI
6.3. Posted by superm1.

3) ACPICA documentation: Updated the legal info (that appears at
the start of the Documents) to clarify distribution rights that
are granted.

30 July 2021. Summary of changes for version 20210730:

This release is available at https://acpica.org/downloads

1) ACPICA kernel-resident subsystem:

2) iASL Compiler/Disassembler and ACPICA tools:

iasl: Check usage of _CRS, _DIS, _PRS, and _SRS objects (July 2021).
Under the Device Object:
1) If _DIS is present, must have a _CRS and _SRS
2) If _PRS is present, must have a _CRS, _DIS, and _SRS
3) If _SRS is present, must have a _CRS and _DIS
A warning will be issued for each of these cases.
Note: For existing ASL/projects, these warnings may be disabled by
specifying this on the command line:
"-vw 3141"

iASL Table Disassembler/Table compiler: Fix for WPBT table with no
command-line arguments. Handle the case where the Command-line
Arguments table field does not exist (zero).

Headers: Add new DBG2 Serial Port Subtypes
The Microsoft Debug Port Table 2 (DBG2) specification revision
September 21, 2020 comprises additional Serial Port Subtypes [1].
Reflect that in the actbl1.h header file. Submitted by:
semihalf-wojtas-marcin

iASL: Add full support for the AEST table (data compiler)
Includes support in the table compiler and the disassembler.

Add PRMT module header to facilitate parsing.
This structure is used in to parse PRMT in other Operating Systems
that relies on using subtable headers in order to parse ACPI tables.
Although the PRMT doesn't have "subtables" it has a list of module
information structures that act as subtables.

iASL: Table disassembler: Add missing strings to decode subtable types.
Includes the MADT and CEDT tables.

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.16.2; 1.1.1.16.4;
30 April 2020. Summary of changes for version 20200430:


1) ACPICA kernel-resident subsystem:

Cleaned up the coding style of a couple of global variables
(AcpiGbl_NextCmdNum and AcpiProtocolLengths) caught by static analyzers.
AcpiProtocolLengths was made static, and the definition of
AcpiGbl_NextCmdNum was moved to acglobal.h.


2) iASL Compiler/Disassembler and ACPICA tools:

iASL DataTable Compiler: Fixed a segfault on errors that aren't directly
associated with a field.

Disassembler: has been made more resilient so that it will continue to
parse AML even if the AML generates ACPI namespace errors. This enables
iASL to disassemble some AML that may have been compiled using older
versions of iASL that no longer compile with newer versions of iASL.

iASL: Fixed the required parameters for _NIH and _NIG. Previously, there
was a mixup where _NIG required one parameter and _NIH required zero
parameters. This change swaps these parameter requirements. Now it is
required that _NIH must be called with one parameter and _NIG requires
zero parameters.

iASL: Allow use of undefined externals as long as they are protected by
an if (CondRefOf (...)) block when compiling multiple definition blocks.

iASL: Fixed the type override behavior of named objects that are declared
as External. External declarations will no longer override the type of
the actual definition if it already exists.

AcpiNames: Added setargv.obj to the MSVC 2017 link sequence to enable
command line wildcard support on Windows. Note: the AcpiNames utility is
essentially redundant with the AcpiExec utility (using the "namespace"
command) and is therefore deprecated. It will be removed in future
releases of ACPICA.

Disassembler: ignore AE_ALREADY_EXISTS status when parsing create*
operators. The disassembler is intended to emit existing ASL code as-is.
Therefore, error messages emitted during disassembly should be ignored or
handled in a way such that the disassembler can continue to parse the
AML. This change ignores AE_ALREADY_EXISTS errors during the deferred Op
parsing for create operators in order to complete parsing ASL termlists.

iASL DataTable Compiler: IVRS table: fix potentially uninitialized
variable warning. Some compilers catch potential uninitialized variables.
This is done by examining branches of if/else statements. This change
replaces an "else if" with an "else" to fix the uninitialized variable
warning.

branches: 1.1.1.11.2;

branches: 1.1.1.10.2;

One more time in the right place...

branches: 1.1.1.7.2; 1.1.1.7.4;
import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.15.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.12.4; 1.1.1.12.6;

branches: 1.1.1.9.2;

branches: 1.1.1.8.12;
One more time in the right place...

branches: 1.1.1.7.2; 1.1.1.7.4;
import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.18.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.15.4; 1.1.1.15.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.12.2;

branches: 1.1.1.11.2;

One more time in the right place...

branches: 1.1.1.9.2;
Import acpica-20160930:

branches: 1.1.1.8.2;
22 April 2016. Summary of changes for version 20160422:

1) ACPICA kernel-resident subsystem:

Fixed a regression in the GAS (generic address structure) arbitrary bit
support in AcpiHwRead/AcpiHwWrite. Problem could cause incorrect behavior
and incorrect return values. Lv Zheng. ACPICA BZ 1270.

ACPI 6.0: Added support for new/renamed resource macros. One new argument
was added to each of these macros, and the original name has been
deprecated. The AML disassembler will always disassemble to the new
names. Support for the new macros was added to iASL, disassembler,
resource manager, and the acpihelp utility. ACPICA BZ 1274.

I2cSerialBus -> I2cSerialBusV2
SpiSerialBus -> SpiSerialBusV2
UartSerialBus -> UartSerialBusV2

ACPI 6.0: Added support for a new integer field that was appended to the
package object returned by the _BIX method. This adds iASL compile-time
and AML runtime error checking. ACPICA BZ 1273.

ACPI 6.1: Added support for a new PCCT subtable, "HW-Reduced Comm
Subspace Type2" (Headers, Disassembler, and data table compiler).

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 137.4K Code, 52.6K Data, 190.0K Total
Debug Version: 201.5K Code, 82.2K Data, 283.7K Total
Previous Release:
Non-Debug Version: 137.1K Code, 51.5K Data, 188.6K Total
Debug Version: 201.0K Code, 82.0K Data, 283.0K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented an ASL grammar extension to allow/enable executable
"module-level code" to be created and executed under the various
operators that create new scopes. This type of AML code is already
supported in all known AML interpreters, and the grammar change will
appear in the next version of the ACPI specification. Simplifies the
conditional runtime creation of named objects under these object types:

Device
PowerResource
Processor
Scope
ThermalZone

iASL: Implemented a new ASL extension, a "For" loop macro to add greater
ease-of-use to the ASL language. The syntax is similar to the
corresponding C operator, and is implemented with the existing AML While
opcode -- thus requiring no changes to existing AML interpreters.

For (Initialize, Predicate, Update) {TermList}

Grammar:
ForTerm :=
For (
Initializer // Nothing | TermArg => ComputationalData
Predicate // Nothing | TermArg => ComputationalData
Update // Nothing | TermArg => ComputationalData
) {TermList}


iASL: The _HID/_ADR detection and validation has been enhanced to search
under conditionals in order to allow these objects to be conditionally
created at runtime.

iASL: Fixed several issues with the constant folding feature. The
improvement allows better detection and resolution of statements that can
be folded at compile time. ACPICA BZ 1266.

iASL/Disassembler: Fixed a couple issues with the Else{If{}...}
conversion to the ASL ElseIf operator where incorrect ASL code could be
generated.

iASL/Disassembler: Fixed a problem with the ASL+ code disassembly where
sometimes an extra (and extraneous) set of parentheses were emitted for
some combinations of operators. Although this did not cause any problems
with recompilation of the disassembled code, it made the code more
difficult to read. David Box. ACPICA BZ 1231.

iASL: Changed to ignore the unreferenced detection for predefined names
of resource descriptor elements, when the resource descriptor is
created/defined within a control method.

iASL: Disassembler: Fix a possible fault with externally declared Buffer
objects.

import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.14.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.11.4; 1.1.1.11.6;

branches: 1.1.1.9.2;

branches: 1.1.1.8.8;

branches: 1.1.1.7.4;
One more time in the right place...

branches: 1.1.1.6.2; 1.1.1.6.4;
import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.19.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.16.4; 1.1.1.16.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.13.2;

branches: 1.1.1.12.2;

branches: 1.1.1.9.4;
One more time in the right place...

branches: 1.1.1.8.2; 1.1.1.8.4;
22 April 2016. Summary of changes for version 20160422:

1) ACPICA kernel-resident subsystem:

Fixed a regression in the GAS (generic address structure) arbitrary bit
support in AcpiHwRead/AcpiHwWrite. Problem could cause incorrect behavior
and incorrect return values. Lv Zheng. ACPICA BZ 1270.

ACPI 6.0: Added support for new/renamed resource macros. One new argument
was added to each of these macros, and the original name has been
deprecated. The AML disassembler will always disassemble to the new
names. Support for the new macros was added to iASL, disassembler,
resource manager, and the acpihelp utility. ACPICA BZ 1274.

I2cSerialBus -> I2cSerialBusV2
SpiSerialBus -> SpiSerialBusV2
UartSerialBus -> UartSerialBusV2

ACPI 6.0: Added support for a new integer field that was appended to the
package object returned by the _BIX method. This adds iASL compile-time
and AML runtime error checking. ACPICA BZ 1273.

ACPI 6.1: Added support for a new PCCT subtable, "HW-Reduced Comm
Subspace Type2" (Headers, Disassembler, and data table compiler).

Example Code and Data Size: These are the sizes for the OS-independent
acpica.lib produced by the Microsoft Visual C++ 9.0 32-bit compiler. The
debug version of the code includes the debug output trace mechanism and
has a much larger code and data size.

Current Release:
Non-Debug Version: 137.4K Code, 52.6K Data, 190.0K Total
Debug Version: 201.5K Code, 82.2K Data, 283.7K Total
Previous Release:
Non-Debug Version: 137.1K Code, 51.5K Data, 188.6K Total
Debug Version: 201.0K Code, 82.0K Data, 283.0K Total


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented an ASL grammar extension to allow/enable executable
"module-level code" to be created and executed under the various
operators that create new scopes. This type of AML code is already
supported in all known AML interpreters, and the grammar change will
appear in the next version of the ACPI specification. Simplifies the
conditional runtime creation of named objects under these object types:

Device
PowerResource
Processor
Scope
ThermalZone

iASL: Implemented a new ASL extension, a "For" loop macro to add greater
ease-of-use to the ASL language. The syntax is similar to the
corresponding C operator, and is implemented with the existing AML While
opcode -- thus requiring no changes to existing AML interpreters.

For (Initialize, Predicate, Update) {TermList}

Grammar:
ForTerm :=
For (
Initializer // Nothing | TermArg => ComputationalData
Predicate // Nothing | TermArg => ComputationalData
Update // Nothing | TermArg => ComputationalData
) {TermList}


iASL: The _HID/_ADR detection and validation has been enhanced to search
under conditionals in order to allow these objects to be conditionally
created at runtime.

iASL: Fixed several issues with the constant folding feature. The
improvement allows better detection and resolution of statements that can
be folded at compile time. ACPICA BZ 1266.

iASL/Disassembler: Fixed a couple issues with the Else{If{}...}
conversion to the ASL ElseIf operator where incorrect ASL code could be
generated.

iASL/Disassembler: Fixed a problem with the ASL+ code disassembly where
sometimes an extra (and extraneous) set of parentheses were emitted for
some combinations of operators. Although this did not cause any problems
with recompilation of the disassembled code, it made the code more
difficult to read. David Box. ACPICA BZ 1231.

iASL: Changed to ignore the unreferenced detection for predefined names
of resource descriptor elements, when the resource descriptor is
created/defined within a control method.

iASL: Disassembler: Fix a possible fault with externally declared Buffer
objects.

import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

merge our changes into 20250807

merge conflicts between 2024-08-27 and 2024-12-12

branches: 1.19.6;
merge conflicts between 20230628 and 20221020

merge conflicts between acpica-20211217 and acpica-20220331

merge changes from acpica-20210930 to acpica-20211217

Merge local changes with acpica-20210331

branches: 1.15.4; 1.15.6;
merge conflicts

merge conflicts

merge conflicts

- merge conflicts
- change default debug level to normal; the evaluation trace is too noisy

branches: 1.11.2;
Merge conflicts; STA methods and fields are not present anymore.

branches: 1.10.2;
merge conflicts

merge conflicts

branches: 1.8.4;
merge conflicts

branches: 1.7.2; 1.7.4;
merge new acpica

resolve conflicts.

branches: 1.5.2;
merge conflicts

resolve conflicts

branches: 1.3.2; 1.3.4; 1.3.8; 1.3.10; 1.3.20; 1.3.24;
Merge ACPICA 20110211.

Apply our local patches.

branches: 1.1.1;
Initial revision

merge our changes into 20250807

merge conflicts between 2024-08-27 and 2024-12-12

branches: 1.8.6;
merge conflicts between 20230628 and 20221020

merge conflicts between acpica-20211217 and acpica-20220331

Merge local changes with acpica-20210331

branches: 1.5.4; 1.5.6;
merge conflicts

merge conflicts

- merge conflicts
- change default debug level to normal; the evaluation trace is too noisy

branches: 1.2.2;
Merge conflicts; STA methods and fields are not present anymore.

branches: 1.1.1;
Initial revision

merge our changes into 20250807

merge conflicts between 2024-08-27 and 2024-12-12

branches: 1.17.6;
merge conflicts between 20230628 and 20221020

merge conflicts between acpica-20211217 and acpica-20220331

Merge local changes with acpica-20210331

branches: 1.14.4; 1.14.6;
merge conflicts

merge conflicts

- merge conflicts
- change default debug level to normal; the evaluation trace is too noisy

branches: 1.11.2;
Merge conflicts; STA methods and fields are not present anymore.

branches: 1.10.2;
merge conflicts

merge conflicts

merge conflicts

branches: 1.7.4;
merge conflicts

branches: 1.6.2;
merge conflicts.

branches: 1.5.2;
merge new acpica

CID 1292510: Handle allocation failure.

merge conflicts

CID 1292510: Check allocation

branches: 1.1.1;
Initial revision

merge our changes into 20250807

merge conflicts between 2024-08-27 and 2024-12-12

branches: 1.3.6;
merge conflicts between 20230628 and 20221020

Fix out of range access in AcpiDsExecEndOp().

- Found by kUBSan.
- See: https://github.com/acpica/acpica/pull/745

branches: 1.1.1;
Initial revision

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.19.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.16.4; 1.1.1.16.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.12.2;

branches: 1.1.1.11.2;

One more time in the right place...

branches: 1.1.1.8.2; 1.1.1.8.4;
import new acpica:

branches: 1.1.1.5.2;

import new acpica

branches: 1.1.1.3.2; 1.1.1.3.12; 1.1.1.3.16;
Import ACPICA 20110623.

Selected changes since 20110211 include, among other things, fixes to _PRW
parsing, fix to a regression with the Load() operator, improvements in NULL
package element removal, support for "spurious" global lock interrupts,
execution of orphaned _REG methods under acpiec(4), and smaller iasl(8)
improvements.

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.19.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.16.4; 1.1.1.16.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.13.2;

branches: 1.1.1.12.2;

branches: 1.1.1.9.4;
One more time in the right place...

branches: 1.1.1.8.2;
Import acpica-20160930:

branches: 1.1.1.7.2;
import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.12; 1.1.1.2.16;
Import ACPICA 20110623.

Selected changes since 20110211 include, among other things, fixes to _PRW
parsing, fix to a regression with the Load() operator, improvements in NULL
package element removal, support for "spurious" global lock interrupts,
execution of orphaned _REG methods under acpiec(4), and smaller iasl(8)
improvements.

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.8;
Import 20110211.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.14.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.11.4; 1.1.1.11.6;

branches: 1.1.1.9.2;

branches: 1.1.1.7.12;
One more time in the right place...

branches: 1.1.1.6.2; 1.1.1.6.4;
import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.

Import 20250807 (previous was 20241212)

Import new acpica-2024-12-12; previous one was 2024-08-27

branches: 1.1.1.14.6;
Import acpica-20230628 (last was 20221020)

Import acpica-2022-03-31

31 March 2021. Summary of changes for version 20210331:

This release is available at https://acpica.org/downloads, and
includes all ACPI 6.4 support

1) ACPICA kernel-resident subsystem:
ACPI 6.4: iASL: deprecate DDBHandleObj keyword
Always create namespace nodes using AcpiNsCreateNode(). ACPICA is
allocating an object using kmalloc(), but then frees it using
kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong.
Fixed a race condition in generic serial bus operation region
handler. Fixed by Hans de Goede.

2) iASL Compiler/Disassembler and ACPICA tools:

ACPI 6.4: NFIT: add Location Cookie field
ACPI 6.4: HMAT: add new fields/flags
ACPI 6.4: Add new flags in SRAT
ACPI 6.4: add SDEV secure access components
ACPI 6.4: add Csi2Bus resource template
ACPI 6.4: add support for PHAT table
ACPI 6.4: add support for PMTT table
Add disassembly support for the IVRS table. Compilation of the
table is not yet complete. Fixed a potential infinite loop due to
type mismatch. The for-loop is using a UINT8 counter and comparing
the upper limit against a UINT32 AslGbl_ExpectedMessagesIndex
maximum. In the case where AslGbl_ExpectedMessagesIndex is > 255
the counter i will wrap around to zero and the loop will never
exit. I suspect the AslGbl_ExpectedMessagesIndex is never that
high, but fixing this does future proof the code and cleans up
static analysis warnings.Colin King.

iASL/TableCompiler: update it with IORT table E.b revision changes.
From shamiali2008.
iASL/TableCompiler: Add compilation support for the VIOT table.
Signed-off-by: Jean-Philippe Brucker.
iASL/TableCompiler: Add compilation support for CEDT table.
Also, update the CEDT template.

branches: 1.1.1.11.4; 1.1.1.11.6;

13 December 2018. Summary of changes for version 20181213:

1) ACPICA Kernel-resident Subsystem:

Fixed some buffer length issues with the GenericSerialBus, related to two
of the bidirectional protocols: AttribRawProcessBytes and AttribRawBytes,
which are rarely seen in the field. For these, the LEN field of the ASL
buffer is now ignored. Hans de Goede

Implemented a new object evaluation trace mechanism for control methods
and data objects. This includes nested control methods. It is
particularly useful for examining the ACPI execution during system
initialization since the output is relatively terse. The flag below
enables the output of the trace via the ACPI_DEBUG_PRINT_RAW interface:
#define ACPI_LV_EVALUATION 0x00080000

Examples:
Enter evaluation : _SB.PCI0._INI (Method)
Exit evaluation : _SB.PCI0._INI
Enter evaluation : _OSI (Method)
Exit evaluation : _OSI
Enter evaluation : _SB.PCI0.TEST (Method)
Nested method call : _SB.PCI0.NST1
Exit nested method : _SB.PCI0.NST1
Exit evaluation : _SB.PCI0.TEST

Added two recently-defined _OSI strings. See
https://docs.microsoft.com/en-us/windows-hardware/drivers/acpi/winacpi-
osi.
"Windows 2018"
"Windows 2018.2"

Update for buffer-to-string conversions via the ToHexString ASL operator.
A "0x" is now prepended to each of the hex values in the output string.
This provides compatibility with other ACPI implementations. The ACPI
specification is somewhat vague on this issue.
Example output string after conversion:
"0x01,0x02,0x03,0x04,0x05,0x06"

Return a run-time error for TermArg expressions within individual package
elements. Although this is technically supported by the ASL grammar,
other ACPI implementations do not support this either. Also, this fixes a
fault if this type of construct is ever encountered (it never has been).


2) iASL Compiler/Disassembler and Tools:

iASL: Implemented a new compile option (-ww) that will promote individual
warnings and remarks to errors. This is intended to enhance the firmware
build process.

AcpiExec: Implemented a new command-line option (-eo) to support the new
object evaluation trace mechanism described above.

Disassembler: Added support to disassemble OEMx tables as AML/ASL tables
instead of a "unknown table" message.

AcpiHelp: Improved support for the "special" predefined names such as
_Lxx, _Exx, _EJx, _T_x, etc. For these, any legal hex value can now be
used for "xx" and "x".

branches: 1.1.1.8.2;

branches: 1.1.1.7.12;
One more time in the right place...

branches: 1.1.1.6.2; 1.1.1.6.4;
import new acpica:

branches: 1.1.1.4.2;

import new acpica

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.8; 1.1.1.2.10; 1.1.1.2.20; 1.1.1.2.24;
Import 20110211.

Reimport ACPICA 20100528 to a new location.