Update sljit revision.

branches: 1.5.16; 1.5.18;
Update sljit revision to r313 after the import.

branches: 1.4.4;
New sljit version is r257.

branches: 1.3.2; 1.3.4; 1.3.14;
Update sljit revision in README.import.

Update README.import.

Add import notes.

branches: 1.2.2; 1.2.4;
Move sljit_mod.c to sys/external/bsd/sljit/sljit and share it between
builtin and standalone module.

Fix compilation.

Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

branches: 1.1.1.2.16; 1.1.1.2.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.6; 1.1.1.1.8;
Import sljit 0.91 (svn r257).

The changes since the last import are:

r257: Add missing ADJUST_LOCAL_OFFSET for ARM64.
r256: Move incorrectly placed array definitions.
r255: More work on testing environment.
r254: Refactor test default output.
r253: Pass entry adress in r12 on PPC-LE.
r252: Optimize calls on MIPS-64.
r251: Several minor fixes.
r250: Add missing SLJIT_IS_FPU_AVAILABLE checks and reorder U and S flags.
r249: Optimize jumps on ARM-64.
r248: Optimize jumps on PowerPC.
r247: MIPS64 support is mostly finished.
r246: MIPS arithmetic.
r245: Start working on MIPS64.
r244: Uniform names for TILE-Gx.
r243: Uniform the names of ARM compilers.
r242: Change ll to l on x86 and rename some instructions on ARM-64.
r241: Improved memory access in PPC and reordering the parameter type flags.
r240: Prepare for more registers on ARM-Thumb2 and renaming TMP_REGISTER to TMP_REG1 on x86.
r239: Prepare for more registers on ARMv5.
r238: Prepare for more registers on TILE-Gx.
r237: Prepare for more registers on MIPS and SPARC.
r236: Prepare for more registers on PPC.
r235: Prepare for more registers on x86.
r234: Most tests are pass on ARM-64 now.
r233: Around 25 test cases are now pass on ARM-64.
r232: More progress on ARM-64 and Thumb2 refactoring.
r231: Some progress an ARM-64 and ARM-T2 refactoring.
r230: Thumb2 code refactoring.
r229: Start working on ARM-64.
r228: Little endian PowerPC systems are supported now by the JIT compiler.
r227: TileGX architecture is now supported. Patch made by Jiong Wang.
r226: Cache flush for android. Patch by Giuseppe D'Angelo.
r225: Add support for forcibly freeing unused executable memory. Inspired by Carsten Klein.
r224: Few typo fixes.
r223: Reorder madvise and posix_madvise.
r222: The missing sljit_get_float_register_index function is added.
r221: Remove an invalid shift on ARM.
r220: JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
r219: Better code size statistics.
r218: Improvements for x86 and LIR dump.
r217: ICC and SunPro C fixes
r216: A new file for tracking internal changes are added.
r215: Less GNU dependnet Makefile and Intel style assemby for x86-64 systems.
r214: Switch from stdcall to cdecl in x86-32.
r213: Upstreaming minor fixes. Thanks for Daniel Richard G.
r212: Documentation update and a fix for a locking issue.
r211: Renaming temporaries to scratches to match the new name of the register. Does not affect compatibility.
r210: Improving assertions.
r209: Port sljit to SunPro C compiler. Patch by Daniel Richard G.
r208: SLJIT_TEMPORARY_REGx registers are renamed to SLJIT_SCRATCH_REGx.
r207: Removing unused checks.
r206: Optimizations for arm.
r205: Some optimizations on powerpc, mips and sparc.
r204: Rename sljit_emit_cond_value to sljit_emit_op_flags.
r203: Small x86 optimization.
r202: Finish cond_value with AND and INT_OP.
r201: More x86 fixes and improvements.
r200: Rename buf and code to inst.
r199: Replacing constants with instruction names in x86. Greatly improves maintainability.
r198: Only xmm0-xmm5 is volatile on Win64, so xmm6 must be saved.
r197: PowerPC shift right always modifies the carry flag. We may need to restore it.
r196: Rename SLJIT_F* functions to SLJIT_*D
r195: SLJIT_INT_OP works in the same way as SLJIT_SINGLE_OP: the input register arguments must be generated by the output of another instruction with SLJIT_INT_OP flag
r194: Renaming sljit_w to sljit_sw, sljit_i to sljit_si, sljit_h to sljit_sh, and sljit_b to sljit_sb.
r193: ARM single precision support.
r192: Single precision support added for ppc, mips and sparc.
r191: Add single precision support. Only works on x86 now.
r190: Relace C types with sljit types. No functionality change.
r189: Change 0 to NULL for mmap.
r188: Support environments where MAP_ANON is not available.
r187: Adding type descriptors for pointers and doubles (preparing for x32 ABIs and single precision support).

branches: 1.1.1.1.2; 1.1.1.1.6;
Import sljit 0.91 (svn r257).

The changes since the last import are:

r257: Add missing ADJUST_LOCAL_OFFSET for ARM64.
r256: Move incorrectly placed array definitions.
r255: More work on testing environment.
r254: Refactor test default output.
r253: Pass entry adress in r12 on PPC-LE.
r252: Optimize calls on MIPS-64.
r251: Several minor fixes.
r250: Add missing SLJIT_IS_FPU_AVAILABLE checks and reorder U and S flags.
r249: Optimize jumps on ARM-64.
r248: Optimize jumps on PowerPC.
r247: MIPS64 support is mostly finished.
r246: MIPS arithmetic.
r245: Start working on MIPS64.
r244: Uniform names for TILE-Gx.
r243: Uniform the names of ARM compilers.
r242: Change ll to l on x86 and rename some instructions on ARM-64.
r241: Improved memory access in PPC and reordering the parameter type flags.
r240: Prepare for more registers on ARM-Thumb2 and renaming TMP_REGISTER to TMP_REG1 on x86.
r239: Prepare for more registers on ARMv5.
r238: Prepare for more registers on TILE-Gx.
r237: Prepare for more registers on MIPS and SPARC.
r236: Prepare for more registers on PPC.
r235: Prepare for more registers on x86.
r234: Most tests are pass on ARM-64 now.
r233: Around 25 test cases are now pass on ARM-64.
r232: More progress on ARM-64 and Thumb2 refactoring.
r231: Some progress an ARM-64 and ARM-T2 refactoring.
r230: Thumb2 code refactoring.
r229: Start working on ARM-64.
r228: Little endian PowerPC systems are supported now by the JIT compiler.
r227: TileGX architecture is now supported. Patch made by Jiong Wang.
r226: Cache flush for android. Patch by Giuseppe D'Angelo.
r225: Add support for forcibly freeing unused executable memory. Inspired by Carsten Klein.
r224: Few typo fixes.
r223: Reorder madvise and posix_madvise.
r222: The missing sljit_get_float_register_index function is added.
r221: Remove an invalid shift on ARM.
r220: JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
r219: Better code size statistics.
r218: Improvements for x86 and LIR dump.
r217: ICC and SunPro C fixes
r216: A new file for tracking internal changes are added.
r215: Less GNU dependnet Makefile and Intel style assemby for x86-64 systems.
r214: Switch from stdcall to cdecl in x86-32.
r213: Upstreaming minor fixes. Thanks for Daniel Richard G.
r212: Documentation update and a fix for a locking issue.
r211: Renaming temporaries to scratches to match the new name of the register. Does not affect compatibility.
r210: Improving assertions.
r209: Port sljit to SunPro C compiler. Patch by Daniel Richard G.
r208: SLJIT_TEMPORARY_REGx registers are renamed to SLJIT_SCRATCH_REGx.
r207: Removing unused checks.
r206: Optimizations for arm.
r205: Some optimizations on powerpc, mips and sparc.
r204: Rename sljit_emit_cond_value to sljit_emit_op_flags.
r203: Small x86 optimization.
r202: Finish cond_value with AND and INT_OP.
r201: More x86 fixes and improvements.
r200: Rename buf and code to inst.
r199: Replacing constants with instruction names in x86. Greatly improves maintainability.
r198: Only xmm0-xmm5 is volatile on Win64, so xmm6 must be saved.
r197: PowerPC shift right always modifies the carry flag. We may need to restore it.
r196: Rename SLJIT_F* functions to SLJIT_*D
r195: SLJIT_INT_OP works in the same way as SLJIT_SINGLE_OP: the input register arguments must be generated by the output of another instruction with SLJIT_INT_OP flag
r194: Renaming sljit_w to sljit_sw, sljit_i to sljit_si, sljit_h to sljit_sh, and sljit_b to sljit_sb.
r193: ARM single precision support.
r192: Single precision support added for ppc, mips and sparc.
r191: Add single precision support. Only works on x86 now.
r190: Relace C types with sljit types. No functionality change.
r189: Change 0 to NULL for mmap.
r188: Support environments where MAP_ANON is not available.
r187: Adding type descriptors for pointers and doubles (preparing for x32 ABIs and single precision support).

Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

branches: 1.1.1.4.16; 1.1.1.4.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.3.4;
Import sljit 0.91 (svn r257).

The changes since the last import are:

r257: Add missing ADJUST_LOCAL_OFFSET for ARM64.
r256: Move incorrectly placed array definitions.
r255: More work on testing environment.
r254: Refactor test default output.
r253: Pass entry adress in r12 on PPC-LE.
r252: Optimize calls on MIPS-64.
r251: Several minor fixes.
r250: Add missing SLJIT_IS_FPU_AVAILABLE checks and reorder U and S flags.
r249: Optimize jumps on ARM-64.
r248: Optimize jumps on PowerPC.
r247: MIPS64 support is mostly finished.
r246: MIPS arithmetic.
r245: Start working on MIPS64.
r244: Uniform names for TILE-Gx.
r243: Uniform the names of ARM compilers.
r242: Change ll to l on x86 and rename some instructions on ARM-64.
r241: Improved memory access in PPC and reordering the parameter type flags.
r240: Prepare for more registers on ARM-Thumb2 and renaming TMP_REGISTER to TMP_REG1 on x86.
r239: Prepare for more registers on ARMv5.
r238: Prepare for more registers on TILE-Gx.
r237: Prepare for more registers on MIPS and SPARC.
r236: Prepare for more registers on PPC.
r235: Prepare for more registers on x86.
r234: Most tests are pass on ARM-64 now.
r233: Around 25 test cases are now pass on ARM-64.
r232: More progress on ARM-64 and Thumb2 refactoring.
r231: Some progress an ARM-64 and ARM-T2 refactoring.
r230: Thumb2 code refactoring.
r229: Start working on ARM-64.
r228: Little endian PowerPC systems are supported now by the JIT compiler.
r227: TileGX architecture is now supported. Patch made by Jiong Wang.
r226: Cache flush for android. Patch by Giuseppe D'Angelo.
r225: Add support for forcibly freeing unused executable memory. Inspired by Carsten Klein.
r224: Few typo fixes.
r223: Reorder madvise and posix_madvise.
r222: The missing sljit_get_float_register_index function is added.
r221: Remove an invalid shift on ARM.
r220: JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
r219: Better code size statistics.
r218: Improvements for x86 and LIR dump.
r217: ICC and SunPro C fixes
r216: A new file for tracking internal changes are added.
r215: Less GNU dependnet Makefile and Intel style assemby for x86-64 systems.
r214: Switch from stdcall to cdecl in x86-32.
r213: Upstreaming minor fixes. Thanks for Daniel Richard G.
r212: Documentation update and a fix for a locking issue.
r211: Renaming temporaries to scratches to match the new name of the register. Does not affect compatibility.
r210: Improving assertions.
r209: Port sljit to SunPro C compiler. Patch by Daniel Richard G.
r208: SLJIT_TEMPORARY_REGx registers are renamed to SLJIT_SCRATCH_REGx.
r207: Removing unused checks.
r206: Optimizations for arm.
r205: Some optimizations on powerpc, mips and sparc.
r204: Rename sljit_emit_cond_value to sljit_emit_op_flags.
r203: Small x86 optimization.
r202: Finish cond_value with AND and INT_OP.
r201: More x86 fixes and improvements.
r200: Rename buf and code to inst.
r199: Replacing constants with instruction names in x86. Greatly improves maintainability.
r198: Only xmm0-xmm5 is volatile on Win64, so xmm6 must be saved.
r197: PowerPC shift right always modifies the carry flag. We may need to restore it.
r196: Rename SLJIT_F* functions to SLJIT_*D
r195: SLJIT_INT_OP works in the same way as SLJIT_SINGLE_OP: the input register arguments must be generated by the output of another instruction with SLJIT_INT_OP flag
r194: Renaming sljit_w to sljit_sw, sljit_i to sljit_si, sljit_h to sljit_sh, and sljit_b to sljit_sb.
r193: ARM single precision support.
r192: Single precision support added for ppc, mips and sparc.
r191: Add single precision support. Only works on x86 now.
r190: Relace C types with sljit types. No functionality change.
r189: Change 0 to NULL for mmap.
r188: Support environments where MAP_ANON is not available.
r187: Adding type descriptors for pointers and doubles (preparing for x32 ABIs and single precision support).

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.14;
Import of sljit @ r186.

This version adds sparc architecture. Other changes:

r184: NAN to UNORDERED renaming and other fixes.
r180: Common caching in PPC and MIPS.

Initial import of sljit @ r175.

svn co https://sljit.svn.sourceforge.net/svnroot/sljit@r175 dist

Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

branches: 1.1.1.4.16; 1.1.1.4.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.3.4;
Import sljit 0.91 (svn r257).

The changes since the last import are:

r257: Add missing ADJUST_LOCAL_OFFSET for ARM64.
r256: Move incorrectly placed array definitions.
r255: More work on testing environment.
r254: Refactor test default output.
r253: Pass entry adress in r12 on PPC-LE.
r252: Optimize calls on MIPS-64.
r251: Several minor fixes.
r250: Add missing SLJIT_IS_FPU_AVAILABLE checks and reorder U and S flags.
r249: Optimize jumps on ARM-64.
r248: Optimize jumps on PowerPC.
r247: MIPS64 support is mostly finished.
r246: MIPS arithmetic.
r245: Start working on MIPS64.
r244: Uniform names for TILE-Gx.
r243: Uniform the names of ARM compilers.
r242: Change ll to l on x86 and rename some instructions on ARM-64.
r241: Improved memory access in PPC and reordering the parameter type flags.
r240: Prepare for more registers on ARM-Thumb2 and renaming TMP_REGISTER to TMP_REG1 on x86.
r239: Prepare for more registers on ARMv5.
r238: Prepare for more registers on TILE-Gx.
r237: Prepare for more registers on MIPS and SPARC.
r236: Prepare for more registers on PPC.
r235: Prepare for more registers on x86.
r234: Most tests are pass on ARM-64 now.
r233: Around 25 test cases are now pass on ARM-64.
r232: More progress on ARM-64 and Thumb2 refactoring.
r231: Some progress an ARM-64 and ARM-T2 refactoring.
r230: Thumb2 code refactoring.
r229: Start working on ARM-64.
r228: Little endian PowerPC systems are supported now by the JIT compiler.
r227: TileGX architecture is now supported. Patch made by Jiong Wang.
r226: Cache flush for android. Patch by Giuseppe D'Angelo.
r225: Add support for forcibly freeing unused executable memory. Inspired by Carsten Klein.
r224: Few typo fixes.
r223: Reorder madvise and posix_madvise.
r222: The missing sljit_get_float_register_index function is added.
r221: Remove an invalid shift on ARM.
r220: JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
r219: Better code size statistics.
r218: Improvements for x86 and LIR dump.
r217: ICC and SunPro C fixes
r216: A new file for tracking internal changes are added.
r215: Less GNU dependnet Makefile and Intel style assemby for x86-64 systems.
r214: Switch from stdcall to cdecl in x86-32.
r213: Upstreaming minor fixes. Thanks for Daniel Richard G.
r212: Documentation update and a fix for a locking issue.
r211: Renaming temporaries to scratches to match the new name of the register. Does not affect compatibility.
r210: Improving assertions.
r209: Port sljit to SunPro C compiler. Patch by Daniel Richard G.
r208: SLJIT_TEMPORARY_REGx registers are renamed to SLJIT_SCRATCH_REGx.
r207: Removing unused checks.
r206: Optimizations for arm.
r205: Some optimizations on powerpc, mips and sparc.
r204: Rename sljit_emit_cond_value to sljit_emit_op_flags.
r203: Small x86 optimization.
r202: Finish cond_value with AND and INT_OP.
r201: More x86 fixes and improvements.
r200: Rename buf and code to inst.
r199: Replacing constants with instruction names in x86. Greatly improves maintainability.
r198: Only xmm0-xmm5 is volatile on Win64, so xmm6 must be saved.
r197: PowerPC shift right always modifies the carry flag. We may need to restore it.
r196: Rename SLJIT_F* functions to SLJIT_*D
r195: SLJIT_INT_OP works in the same way as SLJIT_SINGLE_OP: the input register arguments must be generated by the output of another instruction with SLJIT_INT_OP flag
r194: Renaming sljit_w to sljit_sw, sljit_i to sljit_si, sljit_h to sljit_sh, and sljit_b to sljit_sb.
r193: ARM single precision support.
r192: Single precision support added for ppc, mips and sparc.
r191: Add single precision support. Only works on x86 now.
r190: Relace C types with sljit types. No functionality change.
r189: Change 0 to NULL for mmap.
r188: Support environments where MAP_ANON is not available.
r187: Adding type descriptors for pointers and doubles (preparing for x32 ABIs and single precision support).

branches: 1.1.1.2.2; 1.1.1.2.4; 1.1.1.2.14;
Import of sljit @ r186.

This version adds sparc architecture. Other changes:

r184: NAN to UNORDERED renaming and other fixes.
r180: Common caching in PPC and MIPS.

Initial import of sljit @ r175.

svn co https://sljit.svn.sourceforge.net/svnroot/sljit@r175 dist

Resolve conflicts.

branches: 1.1.1;
Initial revision

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.1.2; 1.1.1.1.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

branches: 1.1.1.3.16; 1.1.1.3.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.2.4;
Import sljit 0.91 (svn r257).

The changes since the last import are:

r257: Add missing ADJUST_LOCAL_OFFSET for ARM64.
r256: Move incorrectly placed array definitions.
r255: More work on testing environment.
r254: Refactor test default output.
r253: Pass entry adress in r12 on PPC-LE.
r252: Optimize calls on MIPS-64.
r251: Several minor fixes.
r250: Add missing SLJIT_IS_FPU_AVAILABLE checks and reorder U and S flags.
r249: Optimize jumps on ARM-64.
r248: Optimize jumps on PowerPC.
r247: MIPS64 support is mostly finished.
r246: MIPS arithmetic.
r245: Start working on MIPS64.
r244: Uniform names for TILE-Gx.
r243: Uniform the names of ARM compilers.
r242: Change ll to l on x86 and rename some instructions on ARM-64.
r241: Improved memory access in PPC and reordering the parameter type flags.
r240: Prepare for more registers on ARM-Thumb2 and renaming TMP_REGISTER to TMP_REG1 on x86.
r239: Prepare for more registers on ARMv5.
r238: Prepare for more registers on TILE-Gx.
r237: Prepare for more registers on MIPS and SPARC.
r236: Prepare for more registers on PPC.
r235: Prepare for more registers on x86.
r234: Most tests are pass on ARM-64 now.
r233: Around 25 test cases are now pass on ARM-64.
r232: More progress on ARM-64 and Thumb2 refactoring.
r231: Some progress an ARM-64 and ARM-T2 refactoring.
r230: Thumb2 code refactoring.
r229: Start working on ARM-64.
r228: Little endian PowerPC systems are supported now by the JIT compiler.
r227: TileGX architecture is now supported. Patch made by Jiong Wang.
r226: Cache flush for android. Patch by Giuseppe D'Angelo.
r225: Add support for forcibly freeing unused executable memory. Inspired by Carsten Klein.
r224: Few typo fixes.
r223: Reorder madvise and posix_madvise.
r222: The missing sljit_get_float_register_index function is added.
r221: Remove an invalid shift on ARM.
r220: JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
r219: Better code size statistics.
r218: Improvements for x86 and LIR dump.
r217: ICC and SunPro C fixes
r216: A new file for tracking internal changes are added.
r215: Less GNU dependnet Makefile and Intel style assemby for x86-64 systems.
r214: Switch from stdcall to cdecl in x86-32.
r213: Upstreaming minor fixes. Thanks for Daniel Richard G.
r212: Documentation update and a fix for a locking issue.
r211: Renaming temporaries to scratches to match the new name of the register. Does not affect compatibility.
r210: Improving assertions.
r209: Port sljit to SunPro C compiler. Patch by Daniel Richard G.
r208: SLJIT_TEMPORARY_REGx registers are renamed to SLJIT_SCRATCH_REGx.
r207: Removing unused checks.
r206: Optimizations for arm.
r205: Some optimizations on powerpc, mips and sparc.
r204: Rename sljit_emit_cond_value to sljit_emit_op_flags.
r203: Small x86 optimization.
r202: Finish cond_value with AND and INT_OP.
r201: More x86 fixes and improvements.
r200: Rename buf and code to inst.
r199: Replacing constants with instruction names in x86. Greatly improves maintainability.
r198: Only xmm0-xmm5 is volatile on Win64, so xmm6 must be saved.
r197: PowerPC shift right always modifies the carry flag. We may need to restore it.
r196: Rename SLJIT_F* functions to SLJIT_*D
r195: SLJIT_INT_OP works in the same way as SLJIT_SINGLE_OP: the input register arguments must be generated by the output of another instruction with SLJIT_INT_OP flag
r194: Renaming sljit_w to sljit_sw, sljit_i to sljit_si, sljit_h to sljit_sh, and sljit_b to sljit_sb.
r193: ARM single precision support.
r192: Single precision support added for ppc, mips and sparc.
r191: Add single precision support. Only works on x86 now.
r190: Relace C types with sljit types. No functionality change.
r189: Change 0 to NULL for mmap.
r188: Support environments where MAP_ANON is not available.
r187: Adding type descriptors for pointers and doubles (preparing for x32 ABIs and single precision support).

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.14;
Initial import of sljit @ r175.

svn co https://sljit.svn.sourceforge.net/svnroot/sljit@r175 dist

Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.40; 1.1.1.1.42;
Initial import of sljit @ r175.

svn co https://sljit.svn.sourceforge.net/svnroot/sljit@r175 dist

Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

branches: 1.1.1.3.16; 1.1.1.3.18;
Import sljit version r313.

Changes since the last import:

r313 Fix a racing condition reported by Mozilla.
r312 Support Android ARM64 cacheflush. Patch by Tavian Barnes.
r311 Update opcode dump.
r310 Better type specification for integer operations and conditional types.
r309 Better type specification for long mul and divide operators.
r308 Better type specification for floating point operations.
r307 Change d and s postfixes to f64 and f32.
r306 Change b,h,i postifxes to 8,16,32.
r305 Fix a wrong immediate number. Reported by Michael McConville.
r304 Make file patch by Michael McConville.
r303 Landed changes created by Michael McConville.
r302 Add support for cmov on x86.
r301 Tile-Gx fixes by Walter Lee
r300 Add WinCE support.
r299 Add a tutorial for SLJIT. Contributed by Wen Xichang.
r298 Improve integer division.
r297 Start reworking the integer division.
r296 Add an overview for SLJIT.
r295 Small optimizations for x86 and ARM64.
r294 Fix ARM64 SP alignment.
r293 Add a new sljit_set_compiler_memory_error function.
r292 Add missing argument on ARM32.
r291 Minor fixes and NOINLINE support.
r290 Support custom memory allocators.
r289 Add SLJIT_DOUBLE_ALIGNMENT support and emit_op_custom size check.
r288 Add suport for SLJIT_ARGUMENT_CHECKS on all architectures.
r287 Add SLJIT_ARGUMENT_CHECKS compiler option and lots of cleanups.
r286 Support the new naming on PPC and MIPS.
r285 Support the new naming on ARM and SPARC.
r284 Move the type letter to the beggining of the floating point opcodes.
r283 Add i_ s_ d_ froms to compare types.
r282 Fix an incorrect form of mul on x86-64.
r281 Refactoring sljitConfigInternal.h header.
r280 Remove variable locals offset.
r279 Test skips are not reported if verbose is disabled.
r278 Add options to sljit_emit_enter and sljit_set_context.
r277 Reindexing opX opcodes.
r276 Some comments are fixed and minor refactors were done.
r275 Minor optimizations.
r274 Extend the register set on ARM.
r273 Extend the register set on PPC, MIPS, SPARC.
r272 Allow remapping of any registers: not just scratch->saved, but saved->scratch as well.
r271 Renaming floating point registers to support more of them.
r270 Extend the register set on x86.
r269 Renaming integer registers for preparing the support of any all machine registers.
r268 Refactor a macro to work when debug is disabled.
r267 Introduce architecture macros without 32/64 bit postfix.
r266 The floating point conversion operators are finished on PPC, and they are supported on all architectures now.
r265 FPU operations support locals access now. CONW is supported on PPC now.
r264 Continue code refactoring, MOVS/MOVD are optimized on all architectures.
r263 SPARC implementation of floating point operators.
r262 Small refactorings.
r261 MIPS implementation of floating point conversion operators.
r260 ARM implementation of floating point operators.
r259 x86 implementation of floating point conversion operators.
r258 Refactoring sljit_emit_fop1 opcodes, inserting placeholders for new ones.

branches: 1.1.1.2.4;
Import sljit 0.91 (svn r257).

The changes since the last import are:

r257: Add missing ADJUST_LOCAL_OFFSET for ARM64.
r256: Move incorrectly placed array definitions.
r255: More work on testing environment.
r254: Refactor test default output.
r253: Pass entry adress in r12 on PPC-LE.
r252: Optimize calls on MIPS-64.
r251: Several minor fixes.
r250: Add missing SLJIT_IS_FPU_AVAILABLE checks and reorder U and S flags.
r249: Optimize jumps on ARM-64.
r248: Optimize jumps on PowerPC.
r247: MIPS64 support is mostly finished.
r246: MIPS arithmetic.
r245: Start working on MIPS64.
r244: Uniform names for TILE-Gx.
r243: Uniform the names of ARM compilers.
r242: Change ll to l on x86 and rename some instructions on ARM-64.
r241: Improved memory access in PPC and reordering the parameter type flags.
r240: Prepare for more registers on ARM-Thumb2 and renaming TMP_REGISTER to TMP_REG1 on x86.
r239: Prepare for more registers on ARMv5.
r238: Prepare for more registers on TILE-Gx.
r237: Prepare for more registers on MIPS and SPARC.
r236: Prepare for more registers on PPC.
r235: Prepare for more registers on x86.
r234: Most tests are pass on ARM-64 now.
r233: Around 25 test cases are now pass on ARM-64.
r232: More progress on ARM-64 and Thumb2 refactoring.
r231: Some progress an ARM-64 and ARM-T2 refactoring.
r230: Thumb2 code refactoring.
r229: Start working on ARM-64.
r228: Little endian PowerPC systems are supported now by the JIT compiler.
r227: TileGX architecture is now supported. Patch made by Jiong Wang.
r226: Cache flush for android. Patch by Giuseppe D'Angelo.
r225: Add support for forcibly freeing unused executable memory. Inspired by Carsten Klein.
r224: Few typo fixes.
r223: Reorder madvise and posix_madvise.
r222: The missing sljit_get_float_register_index function is added.
r221: Remove an invalid shift on ARM.
r220: JIT compiler now supports 32 bit Macs thanks to Lawrence Velazquez.
r219: Better code size statistics.
r218: Improvements for x86 and LIR dump.
r217: ICC and SunPro C fixes
r216: A new file for tracking internal changes are added.
r215: Less GNU dependnet Makefile and Intel style assemby for x86-64 systems.
r214: Switch from stdcall to cdecl in x86-32.
r213: Upstreaming minor fixes. Thanks for Daniel Richard G.
r212: Documentation update and a fix for a locking issue.
r211: Renaming temporaries to scratches to match the new name of the register. Does not affect compatibility.
r210: Improving assertions.
r209: Port sljit to SunPro C compiler. Patch by Daniel Richard G.
r208: SLJIT_TEMPORARY_REGx registers are renamed to SLJIT_SCRATCH_REGx.
r207: Removing unused checks.
r206: Optimizations for arm.
r205: Some optimizations on powerpc, mips and sparc.
r204: Rename sljit_emit_cond_value to sljit_emit_op_flags.
r203: Small x86 optimization.
r202: Finish cond_value with AND and INT_OP.
r201: More x86 fixes and improvements.
r200: Rename buf and code to inst.
r199: Replacing constants with instruction names in x86. Greatly improves maintainability.
r198: Only xmm0-xmm5 is volatile on Win64, so xmm6 must be saved.
r197: PowerPC shift right always modifies the carry flag. We may need to restore it.
r196: Rename SLJIT_F* functions to SLJIT_*D
r195: SLJIT_INT_OP works in the same way as SLJIT_SINGLE_OP: the input register arguments must be generated by the output of another instruction with SLJIT_INT_OP flag
r194: Renaming sljit_w to sljit_sw, sljit_i to sljit_si, sljit_h to sljit_sh, and sljit_b to sljit_sb.
r193: ARM single precision support.
r192: Single precision support added for ppc, mips and sparc.
r191: Add single precision support. Only works on x86 now.
r190: Relace C types with sljit types. No functionality change.
r189: Change 0 to NULL for mmap.
r188: Support environments where MAP_ANON is not available.
r187: Adding type descriptors for pointers and doubles (preparing for x32 ABIs and single precision support).

branches: 1.1.1.1.2; 1.1.1.1.4; 1.1.1.1.14;
Initial import of sljit @ r175.

svn co https://sljit.svn.sourceforge.net/svnroot/sljit@r175 dist

Revert "Include opt_diagnostic.h for DIAGNOSTIC."

This did not do what I thought it did. opt_diagnostic.h is only for
the unused _DIAGNOSTIC, which seems like an abortive attempt to
incrementally convert DIAGNOSTIC to an opt_*.h option rather than a
command-line option.

Include opt_diagnostic.h for DIAGNOSTIC.

...at least, in header files, which may not have already included
libkern.h.

Resolve conflicts.

branches: 1.14.16; 1.14.18;
Alloc/free macros in the new sljit version take two arguments.

Resolve conflicts.

branches: 1.12.4;
Rename sljitarch.h to sljit_machdep.h.

Disable FPU in kernel space.

Add $NetBSD$.

Resolve conflicts.

branches: 1.8.2;
Turn on executable allocator an use module_map with UVM_KMF_EXEC flag.

This should fix execution of code generated by librumpkern_sljit.
Also enable global lock.

Report an error if SLJIT_CACHE_FLUSH isn't defined by machine/sljitarch.h.

branches: 1.6.2; 1.6.4;
Apply adapted patch from joerg@ to fix clang build.

branches: 1.5.2;
Resolve conflicts.

Fix compilation.

Fix compilation when DIAGNOSTIC is defined.

Adapt code to compile with -D_KERNEL.

branches: 1.1.1;
Initial revision

Apply a (IMHO) fixed version of upstream commit
https://github.com/zherczeg/sljit/commit/a3caf4956a81046e0b717c764f34a0cf34ead44d
to fix PPC and PPC64 detection.

Resolve conflicts.

branches: 1.10.16; 1.10.18;
Resolve conflicts.

branches: 1.9.4;
Add $NetBSD$.

Don't redefine SLJIT_HALT_PROCESS().

Resolve conflicts.

branches: 1.6.2; 1.6.12;
Apply adapted patch from the author of sljit to fix cdecl functions
generation on i386.

Apply adapted patch from joerg@ to fix clang build.

branches: 1.4.2;
Resolve conflicts.

Fix compilation when DIAGNOSTIC is defined.

Adapt code to compile with -D_KERNEL.

branches: 1.1.1;
Initial revision

Round of uvm.h cleanup.

The poorly named uvm.h is generally supposed to be for uvm-internal
users only.

- Narrow it to files that actually need it -- mostly files that need
to query whether curlwp is the pagedaemon, which should maybe be
exposed by an external header.

- Use uvm_extern.h where feasible and uvm_*.h for things not exposed
by it. We should split up uvm_extern.h but this will serve for now
to reduce the uvm.h dependencies.

- Use uvm_stat.h and #ifdef UVMHIST uvm.h for files that use
UVMHIST(ubchist), since ubchist is declared in uvm.h but the
reference evaporates if UVMHIST is not defined, so we reduce header
file dependencies.

- Make uvm_device.h and uvm_swap.h independently includable while
here.

ok chs@

Resolve conflicts.

branches: 1.5.16; 1.5.18;
Resolve conflicts.

branches: 1.4.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.2.2;
Turn on executable allocator an use module_map with UVM_KMF_EXEC flag.

This should fix execution of code generated by librumpkern_sljit.
Also enable global lock.

branches: 1.1.1;
Initial revision

Add #ifndef _KERNEL guard around userspace #includes

Resolve conflicts.

branches: 1.5.16; 1.5.18;
Resolve conflicts.

branches: 1.4.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.2.2; 1.2.12;
Apply adapted patch from the author of sljit to fix cdecl functions
generation on i386.

branches: 1.1.1;
Initial revision

s/covert/convert/ in comment.

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.2; 1.2.6; 1.2.8;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

sljit: Pacify -Wsign-compare.

If these sizes are negative, we're probably in trouble anyway, so
assert nonnegative here.

Needed to resolve PR 58103.

branches: 1.4.4; 1.4.30;
Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.2; 1.2.6; 1.2.8;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.2; 1.2.6; 1.2.8;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.2; 1.2.6; 1.2.8;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

sljit: avoid compiler warning due to switch fallthru on mips

Unsure why, but this is only a problem when building sljit in
userspace via rump, which we don't do by default on mips,
although it's included in the OCTEON kernel.

Not enough to allow setting MKSLJIT=yes on mips but gets us
closer.

branches: 1.4.36;
Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.7.16; 1.7.18;
Reduce diff with mainstream.

In the new sljt version, ppc_cache_flush() is guarded by
SLJIT_CACHE_FLUSH_OWN_IMPL. We can keep is as long as we
don't define SLJIT_CACHE_FLUSH_OWN_IMPL.

Fix a pilot error in the manual conflict handling..

Resolve conflicts.

branches: 1.4.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.2.2;
Use __syncicache() in sljit on powerpc.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.2.2; 1.2.6; 1.2.30; 1.2.32;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.2; 1.2.6; 1.2.8;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.5.16; 1.5.18;
Resolve conflicts.

branches: 1.4.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.2.2; 1.2.12;
Apply adapted patch from the author of sljit to fix cdecl functions
generation on i386.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.3.16; 1.3.18;
Resolve conflicts.

branches: 1.2.4;
Add $NetBSD$.

branches: 1.1.1;
Initial revision

lint uses the gcc assembly syntax

Resolve conflicts.

branches: 1.8.16; 1.8.18;
Resolve conflicts.

Apply a bugfix from r282 http://sourceforge.net/p/sljit/code/282/.

The bug was originally reported by me in a newer upstream version.
American fuzzy lop rediscovered it for the version of sljit in the
NetBSD tree.

branches: 1.6.2; 1.6.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.4.2; 1.4.12;
Apply adapted patch from the author of sljit to fix cdecl functions
generation on i386.

branches: 1.3.2;
Resolve conflicts.

Fix compilation.

branches: 1.1.1;
Initial revision

branches: 1.1.1.1.2; 1.1.1.1.6;
Update sljit to version 0.93 (svn revision r333).

Changes since the last import:

r333 More x86 fixes and a new stack test.
r332 Improve stack allocation on x86.
r331 Make sljit_free_unused_memory_exec public, PPC flush takes priority.
r330 Reverse the stack utility to top-down.
r329 Add sljit_set_current_flags function.
r328 Add two more virtual registers to x86/32, ARM-32 refactor.
r327 Remove value caching on ARM-32.
r326 Remove value caching on ARM-Thumb2.
r325 Move with update rework.
r324 Arm32 store fixes.
r323 Update macros and remove copyright years.
r322 Reworking flags, removing keep flags.
r321 Quick fix for regexjit.
r320 Improve protected executable allocator. Patch insipred by Christian Persch.
r319 Fully support dynamic code modifications again.
r318 Support protected allocator on all architectures except TILEGX.
r317 Rework protected allocator, only x86 linux is supported now.
r316 Add protected executable allocator.
r315 Remove SLJIT_MEMMOVE.
r314 Fix unaligned accesses on x86. Patch by Marc Mutz.

Round of uvm.h cleanup.

The poorly named uvm.h is generally supposed to be for uvm-internal
users only.

- Narrow it to files that actually need it -- mostly files that need
to query whether curlwp is the pagedaemon, which should maybe be
exposed by an external header.

- Use uvm_extern.h where feasible and uvm_*.h for things not exposed
by it. We should split up uvm_extern.h but this will serve for now
to reduce the uvm.h dependencies.

- Use uvm_stat.h and #ifdef UVMHIST uvm.h for files that use
UVMHIST(ubchist), since ubchist is declared in uvm.h but the
reference evaporates if UVMHIST is not defined, so we reduce header
file dependencies.

- Make uvm_device.h and uvm_swap.h independently includable while
here.

ok chs@

Resolve conflicts.

branches: 1.9.16; 1.9.18;
Alloc/free macros in the new sljit version take two arguments.

Resolve conflicts.

branches: 1.7.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.5.2;
Simplify previous, don't even set the variables if they are not going to
be used.

ifdef unused variables

Turn on executable allocator an use module_map with UVM_KMF_EXEC flag.

This should fix execution of code generated by librumpkern_sljit.
Also enable global lock.

branches: 1.2.2; 1.2.4; 1.2.6;
Adapt code to compile with -D_KERNEL.

branches: 1.1.1;
Initial revision

Resolve conflicts.

branches: 1.4.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.2.2; 1.2.12;
Compile with WARNS=3.

branches: 1.1.1;
Initial revision

Fix unspecified semantics in left shift

Undefined Behavior in
/usr/src/sys/external/bsd/sljit/dist/test_src/sljitTest.c:568:113,
left shift of 1 by 63 places cannot be represented in type 'sljit_sw' (aka 'long')

Undefined Behavior in
/usr/src/sys/external/bsd/sljit/dist/test_src/sljitTest.c:585:73,
left shift of 1 by 63 places cannot be represented in type 'long long'

Cherry-pick upstream patch:

From 4c741e240668ab4cc4fdb67b67d8a566f98e07bf Mon Sep 17 00:00:00 2001
From: Zoltan Herczeg <zherczeg.u-szeged@partner.samsung.com>
Date: Mon, 6 Apr 2020 06:41:27 -0700
Subject: [PATCH] Rework 0x80..0 computation.

Resolve conflicts.

branches: 1.7.16; 1.7.18;
Resolve conflicts.

CID 976986: NULL deref.

Backport a new testcase from r282 (registers are renamed in the new version).
http://sourceforge.net/p/sljit/code/282/.

branches: 1.4.4;
Add $NetBSD$.

Resolve conflicts.

branches: 1.2.2; 1.2.12;
Compile with WARNS=3.

branches: 1.1.1;
Initial revision

Don't destroy mutexes because the module can't be unload.

branches: 1.2.2;
Turn on executable allocator an use module_map with UVM_KMF_EXEC flag.

This should fix execution of code generated by librumpkern_sljit.
Also enable global lock.

branches: 1.1.2; 1.1.4; 1.1.6;
This move is taking too long :-) make the file re-appear to fix the build.